AUDIO SAMPLES FROM IOMEGA 100 ZIP DRIVE TO MAC BOOK PRO / LOGIC?

Posted: Fri, Feb 15 2013, 1:27pm    Post subject: AUDIO SAMPLES FROM ZIP 100 TO MACBOOK PRO / LOGIC?
HI THERE
I HAVE LOADS OF OLD AUDIO SAMPLES ON ZIP DISKS ( ZIP 100 using akai cd3000 sampler ) THAT I WOULD LIKE TO TRANSFER TO MY MAC BOOK PRO FOR LOGIC EX24.
IS IT A SIMPLE CASE OF A 'SCSI TO USB LEAD' , WILL MY MAC BOOK PICK IT UP FROM THERE OR DO I NEED SOFTWARE OR DRIVERS FOR MY MAC TO BE ABLE TO SEE THEM?
IS IT EVEN POSSIBLE AT ALL?
THANKS

Hi guys
Sorry for the delay in coming back. I bought a zip drive pretty cheaply then and it has only just turned up. However when I put my old ZIP disks in, it seems like the ZIP drive reads them at least but the MACBOOK comes up with the following message...
'The disk you inserted was not readable by this computer'
Does this pretty much mean a no go then?  Or can I put the samples from my AKAI sampler back through the old ZIP drive,  reformat some new disks in a certain way on that drive so that my MAC can read them?
All its for really is mainly to take old tracks that used these samples and getting them set up in my mac.  Also there was some good bits and pieces there anyway and would like to keep using those samples for newer projects. I could of coourse resample them from the AKAI straight to the MAC but would be not as practical and would take alot longer. The 13'' macbook pros input is not digital, only its output.
thanks

Similar Messages

  • In start disc mode can I use a external USB flash drive on MAC Book Pro

    In start disc mode can I use a external USB flash drive on MAC Book Pro?

    To do what? Yes you can connect a USB flash drive to the system and if it has the Recovery HD files on it you can boot from it. If it has the OS X install files on it you can boot from it. If it is large enough to contain a Time Machine backup on it you can restore your system from it.
    So what do you want to do with the USB thumb drive?
    Roy02649 wrote:
    In start disc mode can I use a external USB flash drive on MAC Book Pro?

  • I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

    I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
    The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
    I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
    My dj mixer works on another mac computer with the same soundcard and different firewire cable.
    Hope someone can help
    Thanks
    Wayne

    kmiddlet88,
    yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

  • I can't find the videos from my Sony camera on my Mac Book Pro

    I can't locate the videos from my Sony camera on my Mac Book Pro.  Do I need additional software?

    How & where did you search?  I gather the videos are no longer in the cam?  Where do you have the videos go when transferring from your cam?
    Download WhatSize and/or OmniDiskSweeper to see if you can "see" the videos.

  • How to Mount a hard drive to MAC BOOK PRO?

    How to Mount a hard drive to MAC BOOK PRO?

    What kind of hard drive?  If it's an external USB hard drive, just plug it in to a USB port.  It will mount automatically.

  • How to transfer photos from Samsung S2 (android) phone to Mac Book Pro?

    How to transfer photos from Samsung S2 (android) phone to Mac Book Pro?

    transfer photos from samsung android camera to mac pro

  • Retrieve data from a Hard Disk That was connected to the optical Drive of Mac Book pro

    Hi Experts
    I have been using a Mac Book pro from 2011 (Early 2011 Model), In the mid of 2012 I have planned to upgrade, and bought a 240 GB SSD and 16 GB ram from OWC, Installed successfully and bought another 750 GB WD Sata Disk and connected it to the Optical Drive Bay of the Laptop, using the optical drive as an external device now
    I was using the SSD as the main disk for all the applications and OS itself, and tranferred all the user library (iTunes Library, iPhoto Library, Documents etc..) to the additinal 750 SATA Disk,
    Last week the Mag Safe cable has been worn out and seperated completely from the adapter, I tried soldering the cable again and it was working for two days, third day The machine stopped charging and it was working until the battery run out of charge,
    Now I have bought a new Mag Safe Charger for 108 Singapore Dollars and it wont charge, read in iFixit Forums to change the Mag Safe DC in Board, so found a new part in singapore and replaced DC in Board myself, after doing this when I connected the new mag safe adapter, it fired the cpu fan for two second, I was able to see the green light the adapter and it stopped again and the green light wont lit up now
    Removed the logic board from Laptop completely and tried connecting the Mag Safe Adapter I can see the green light,
    So with all the above details, Iam confused whether its the Logic Board or the Battery that is giving me issue, I can find out the problem by contacting a Authorised service centre, but Iam thinking whether its is worth to repair it or buy a New Mac Book Pro ?, Because if I need to change the logic Board need to spend 900 Dollars + 100 dollar service charge
    So I was trying to remove the 750 GB WD Sata Disk to see if I can get the data back so I can buy a new Laptop without worrying,
    The real issue now is when I connect the 750 WD Disk using a sata to usb converter cable to my official macbook, it says the connected USB device is drawing more power than expected and it wont even detect the hard disk, Iam wondering why it cannot detect the hard disk even in the disk utility, is there any way to get the data back from the 750 GB WD Sata disk (which was connected to the Optical Drive Bay)
    Your expert advice is much appreciated
    Regards
    Vinodh

    Welcome to the discussions!
    It sounds as if your disk was not correctly formatted to work with the Mac operating system. I suspect it was formatted in FAT32, which is primarily a Windows format. This type of format will not allow the disk to accept any files larger than 4GB. That's probably why you are seeing the crashes.
    Connect the drive to your Mac and open Applications > Utilities > Airport Utility.
    Click your disk on the left and click the erase tab on the right. You need to format the drive in +Mac OS Extended (Journaled)+. Formatting will erase everything on the disk.
    Then you could try the drive again attached to your AirPort Extreme to see if that will do what you want.

  • How do I burn an iMovie using a bus super drive for mac book pro

    I have a new mac book pro using the maverick operating system.  I also have a ubs super drive.  I am trying to burn an i movie to the dvd to be shown on a dvd player. It is saving as a mp4 and will not play in the dvd player.  How do I save the movie to play it in a dvd player.
    Thanks

    For that you need iDVD. If you don't have it:
    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673
    To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

  • Firewire 400/800 and Iomega connectivity in the Latest Mac Book Pro?

    Hi,
    I am awiting my Mac Book Pro to arrive. I have no experince with a Mac Book Pro.
    I have a Mac version Iomega External Portable Hard Drive. This Iomega has USB2, Firewire 400 & Firewire 800 connectivity.
    I do not think Firewire 400 or Firewire 800 cable came with my Iomega.
    Is this Iomega connectable through Firewire 400 or Firewire 800 to a latest Mac Book pro? If so do I connect it to the Thunderbult port in my Mac Book Pro?
    Is there especial cable avaiable for these purposes?
    Regardsa

    Connection is with the FW800 port using a FW800 to FW800
    cable.  The ones I've purchase came with USB and FW800
    cables.  The Thunderbolt port is only for Thunderbolt devices
    or some displays via a Display Port adapter.
    If for some reason you no longer have any cables, FW800 cables
    are readily available either online or at any store that handles
    Apple computers, and some that don't.

  • Today my M-Audio iControl play button stopped working on my Mac Book Pro after I unplugged the USB cord.

    Hello,
    Today my M-Audio iContol play button stopped working after I unplugged it from the USB port and then plugged it back in. I have a Mac Book Pro Mac OS X 10.7.3 and I only use it for Garage Band. The iControl will only play a very short snippet of a song then shuts off? (Like a millisecond) My space bar works fine as well as the GB play button using the mouse. I have searched for the GB preference files listed on some blogs but I cannot find them...help please!! One more thing, I plgged the iControl into my other Imac and it works fine so the iControl is ok.
    Thanks!

    I have searched for the GB preference files listed on some blogs but I cannot find them...help please!!
    In MacOS 10.7.3 the User LIbrary is hidden. To find the Preferences Files use the Finder "Go" menu:
    Click onto you Desktop to bring the Finder forward.
    In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
    Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
    Regards
    Léonie

  • Basics on transferring all my files from imac 10.5.8 to mac book pro 10.6

    Hello,
    I recently bought a mac book pro and when I was at the apple store the explanations they gave me to transfer all my files, contacts, calendars, photos, .png files, seemed so simple - hook up the ethernet cable and I would be walked through it but NOTHING HAPPENED. I apologize if you have given these basic instructions over and over, but I have been searching for hours and cannot find anything giving me the basic step by step instructions to do this.
    I'm confused, too, on if while I'm working on files in one computer if I can transfer to the next and continue the work. I thought this was going to be very easy, but I feel as if I'm in way over my head. Please help!!

    Hi, and welcome to the forums.
    There are several ways to do this, but you may have bypassed the easiest one: when you first booted up your shiny new Mac, +Setup Assistant+ should have asked if you already had a Mac, and given you the opportunity to transfer your data either directly from it, or from it's Time Machine backups.
    See #19 in the Frequently Asked Questions *User Tip,* also at the top of this forum, for details and a link to a video demo.
    Once you've gone past the "Do you already own a Mac" screen, though, you can't easily start over.
    But if you want to, and haven't added new data you need to keep, use the *Erase, Install, & Migrate* section of the Glenn Carter - Restoring Your Entire System / Time Machine *User Tip,* also at the top of this forum.
    Where it says to select your Time Machine backups, connect the old Mac and select that option instead. The rest of the procedure is exactly the same.

  • How can I steam from my early 2011 15-inch Mac Book Pro to my 2007 Samsung TV?

    I have an early 2011, 15-inch Mac Book Pro Software  OS X 10.9.5 (13F34). It does not have an HDMI port. I have a Samsung TV I bought in 2007 (Model LN-4061F). How can I stream from laptop to my TV? My laptop does not have an HDMI port. I've read I can buy an adapter, but I'm not sure what to buy.
    -Does Apple make them?
    -Are knockoff adapters "safe" to use with my laptop, and are they reliable/have a good quality connection?
    -How much do they cost (I've seen cheap ones on Amazon)?
    -What kind should I buy?
    -Will my laptop stream in HD? 
    I'm new to the community, so hoping someone can advise me how to do this. We also have a Roku, but I'm looking to stream DVDs and directly from TV network websites. 
    Thanks for your help!

    You will have to use the  minidisplay port to connect to the TV.  Assuming that the TV has an HDMI port, you will need a cable such as this:
    http://www.monoprice.com/Product?seq=1&kpid=9476&format=2&p_id=9476&CAWELAID=164 2113595&CAGPSPN=pla%26catargetid=320013720000066114%26cadevice=c&gclid=CJHTtbyQ0 8MCFRQ2aQod14cABw
    With this, you eliminate the need for an adapter.
    Ciao.

  • Can i transfer voice notes from my iPod touch to my mac book pro

    how can i get my voice notes to my mac book pro from my ipod touch

    Yes
    From the Manual
    http://manuals.info.apple.com/MANUALS/1000/MA1657/en_US/ipod_touch_ios6_user_gui de.pdf
    Sharing voice memos with your computer
    You can sync voice memos with the primary iTunes library on your computer, then listen to
    memos on your computer or sync them with another iPod touch or iPhone.
    When you delete a synced memo from iTunes, it stays on the device where it was recorded, but
    is deleted from any other iPod touch or iPhone you synced. If you delete a synced memo on
    iPod touch, it's copied back to iPod touch the next time you sync with iTunes, but you can’t sync
    that copy back to iTunes a second time.
    Sync voice memos with iTunes: Connect iPod touch to your computer and select it in iTunes.
    Select Music at the top of the screen, select Sync Music, select “Include voice memos,” and
    click Apply.
    Voice memos synced from iPod touch to your computer appear in the Music list and in the Voice
    Memos playlist in iTunes. Memos synced from your computer appear in the Voice Memos app on
    iPod touch, but not in the Music app.

  • Need to install external dvd drive on mac book pro

    My internal DVD drive has quit, so I purchased an apple external DVD drive. How do I get me mac book pro to recognize and install it?

    Hi chrisweide,
    Mac computers that shipped with a built-in SuperDrive may not be compatible with the external Apple SuperDrive:
    Mac computers: Apple USB SuperDrive and MacBook Air SuperDrive compatibility
    Regards,
    - Brenden

  • DVD drive in mac book pro

    Regarding the mac book pro  
    SKU: 3827134
    Can you (bestbuy) tell me is it has a dvd drive?  It soes not show one in the specs that I can see.

    It does.  The only models that don't are the retina models and macbook airs.

Maybe you are looking for

  • How do I use a different style for a page for each user?

    I want to allow users to choose their own page style. Is that possible? How do I do that? Thanks, Martine.

  • How to change html style titles of a JTabbedPne at run time??

    hi, how to change html style titles of a JTabbedPne at run time?? setTitleAt is not working...

  • Load pdf with cfheader and cfcontent

    I have the following code to load a PDF. <cfquery datasource="lamtra1_data1" name="getpdf"> Select * from lamtracpdf WHERE id=#url.id# </cfquery> <cfoutput query="getpdf"> <cfheader name="Content-Type" value="pdf"> <cfheader name="Content-Disposition

  • Cost center locked but SAP allows for PO creation

    Dear All, We have a requirement such that whenever a cost center is locked, system should not allow users to create PRs / POs for locked cost center. I tried it through authorization control, but in MM there is no object for cost center. Could expert

  • Initial zoom/fade in effect

    I am new to Flex but know Flash and am trying to make the migration. I always make my Flash movies "build" in the classic flash fashion of parts fading in and zooming in until the entire interface is displayed. what is the best way to create these sa