Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

Hello! 
I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message: 
Error container , type 0 
Event name: AppHangXProcB1 
Reply: No data 
Ident CAB: 0 
Problem signature: 
P1: iexplore.exe 
P2: 9.0.8112.16446 
P3: 4fb57c8f 
P4: 77c1 
P5: 131200 
P6: svchost.exe:AudioClientRpc 
P7: 0.0.0.0 
P8: 
P9: 
P10: 
shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events. 
Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
but it is impossible for the "Remote Audio" device. 
At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
to an older version of Skype, but I would like to solve the problem completely. 

Enable the Allow audio and video playback redirection Group Policy setting
To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
Console (GPMC).
For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
Is this policy applied? Refer:
http://technet.microsoft.com/en-us/library/dd759165.aspx
Also, have you tried update the audio device driver for this terminal server?

Similar Messages

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • How to set a default printer using vbs on windows 2008 R2 with remote desktop services

    Hello
    It seems I wasn't in the right places before / threads. BIG Sorry.
    Here's the problem: I have this VBScript:
    On any computer, the Default Printer "HisBadPrinter"
    strPrinterName = "mySuperPrinter"
    Set objPrinter = Helper.CreateObject("WScript.Network")
    objPrinter.SetDefaultPrinter strPrinterName
    In Xp, Windows 7 it work perfect, The default printer is being changed.
    But in Remote Desktop on Windows Server 2008 R2 it is not working, with any type of account (Administrator, user, powerUser...) "HisBadPrinter" is always the default printer and it's always printing on it without any error messages.
    Help Please.

    Ok, here what I have in my ControlPanel > Devices and Printers
    Adobe PDF (redirected 3)
    Brother HL-4150CDN series on infovm1dc (redirected 3)
    Generic / Text Only (redirected 3)
    HP Color LaserJet 3800 PCL 5c on infodc3 (redirected 3)
    Microsoft XPS Document Writer
    Microsoft XPS Document Writer (redirected 3)
    PDFCreator (redirected 3)
    Now Here what I got when I executed the bit of code :
    TS011
    Adobe PDF (redirected 3)
    TS013
    Microsoft XPS Document Writer (redirected 3)
    TS012
    Generic / Text Only (redirected 3)
    TS015
    Brother HL-4150CDN series on infovm1dc (redirected 3)
    TS016
    HP Color LaserJet 3800 PCL 5c on infodc3 (redirected 3)
    TS014
    PDFCreator (redirected 3)
    TS002
    DIRECT - Brother HL-2460 (redirected 2)
    TS006
    PDFCreator (redirected 2)
    TS003
    Fax (redirected 2)
    TS005
    Microsoft XPS Document Writer (redirected 2)
    TS007
    Brother HL-2460 on infodc3 (redirected 2)
    TS004
    Microsoft Office Document Image Writer (redirected 2)
    TS001
    Brother HL-4150CDN series on infovm1dc (redirected 2)
    XPSPort:
    Microsoft XPS Document Writer
    There is no printer called "\\ALPHA\HP LaserJet P2015 Series PCL 6".
    OK  

  • Does Windows Server 2012 support Remote Desktop Client 6.1?

    Hi,
    Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
    Thanks,
    Jim

    this should help you
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS

  • Installing Oracle 11gR2 Standard Edition on WINDOWS Server 2008R2 with ASM

    Hi,
    I want to setup Oracle 11g DB (11.2.0.2) Standard Edition on Windows Server 2008R2 x64 bit with ASM Instance. I would appreciate if you could suggest me with the following little but important questions.
    The following link from Oracle doesnt have 11.2.0.2 db version for windows x64 bit. Do a patch (which I think is a complete installation) is needed to install after installing 11.2.0.1? or I can directly install 11.2.0.2?
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
    Secondly, I have no such experience regarding installing and setting up ASM Instance on windows. How many disks or etc is needed for ASM (as ASM disks). One of the admin guy said, he has 6 disks (2 for OS and 6 you can use for Oracle or ASM so so). Could you please suggest, how should I divide the disk partitions of what should I say no idea :(
    Also, do ASM instance (diskgroups,disks) should be setup before creating DB (through dbca?)
    I was thinking like:
    - Installing Oracle software
    - Creating ASM disks,diskgroups,instance,etc
    - Creating DB (using dbca?), isnt' it?
    Bundle of thanks in advance.
    Best Regards

    K-Saf wrote:
    Hi,
    I want to setup Oracle 11g DB (11.2.0.2) Standard Edition on Windows Server 2008R2 x64 bit with ASM Instance. I would appreciate if you could suggest me with the following little but important questions.
    The following link from Oracle doesnt have 11.2.0.2 db version for windows x64 bit. Do a patch (which I think is a complete installation) is needed to install after installing 11.2.0.1? or I can directly install 11.2.0.2?
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
    Secondly, I have no such experience regarding installing and setting up ASM Instance on windows. How many disks or etc is needed for ASM (as ASM disks). One of the admin guy said, he has 6 disks (2 for OS and 6 you can use for Oracle or ASM so so). Could you please suggest, how should I divide the disk partitions of what should I say no idea :(
    Also, do ASM instance (diskgroups,disks) should be setup before creating DB (through dbca?)
    I was thinking like:
    - Installing Oracle software
    - Creating ASM disks,diskgroups,instance,etc
    - Creating DB (using dbca?), isnt' it?
    Bundle of thanks in advance.
    Best Regards-You should create ASM
    -After this you could be able to create DB

  • Windows Server 2012 Standard - Remote Desktop Management service won't start

    Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
    The Remote Desktop Management service gives the following error message any  time it is attempted to start:
    "The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    The Event Viewer error message is as follows:
    "The Remote Desktop Management service failed to start. Error code: 0x88250001"
    Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
    server and has AD DS role installed, is virtualized to have one Hyper-V server.
    I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
    only one suffering from this issue.
    I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
    Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
    How do I mend Remote Desktop Management service to start?
    Appreciate your help!
     

    Hi,
    Thank you for posting in Windows Server forum.
    Can administrators perfectly connect to RDS environment?
     In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
    also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
    No RDS license when you connect to an RDS farm in Windows Server 2012
    http://support.microsoft.com/kb/2916846
    If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
    What's New in Remote Desktop Services in Windows Server 2012
    http://technet.microsoft.com/en-in/library/hh831527.aspx
    Install Remote Desktop Services Failed on Windows 2012 Server
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • High availability SQL Server requirements for Remote Desktop Services in Windows Server 2012

    Good night,
    Thanks for reading this question, I do not write much English.
    I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf, I searched in different microsoft link but I have not received a response.
    Kindly appreciate your cooperation and attention.

    Hi Alejandro,
    I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf
    If you want to know the size requirements of .mdf abd .ldf files, since they are parts of SQL database, I suggest you refer to SQL forums below to get more professional support:
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlgetstarted
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
    In addition, here are some articles regarding RDS deployment for you:
    Remote Desktop Services Deployment Guide
    https://technet.microsoft.com/en-us/library/ff710446(v=ws.10).aspx
    Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style
    http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Setting display language Server 2012 R2 Remote Desktop Services

    I'm trying to setup local display language when user logs on to my Remote Desktop Services server.
    I have configured the following GPO:
    User Configuration/Policies/Administrative Templates/Control Panel/Regional
    and Language Options/
    Restrict selection of Windows menus and dialogs language
    Restricts the UI languages Windows should use for the selected user
    When I log on the user display language is not set, but it seems that the GPO has been applied correctly (GPResult)....
    What am I doing wrong ?

    Hi,
    Thank you for your posting in Windows Server Forum.
    As you have configured GPO setting, please have a look at registry setting and check whether it is properly configured over there.
    The Display Language was controlled by the REG_MULTI_SZ key PreferredUILanguages under
    HKCU\Control Panel\Desktop
    Create this key "PreferredUILanguages" with ja-jp when need Japanese and delete it to get back English. 
    You can export this Registry Key and import it instead of edit this key directly. 
    [HKEY_CURRENT_USER\Control Panel\Desktop]
    "PreferredUILanguages"=hex(7):6a,00,61,00,2d,00,6a,00,70,00,00,00,00,00
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Windows Server 2008 R2 Remote Desktop - The requested session access is denied

    Hi, I have been using Windows Server 2008 R2 since it was released, and have 100 servers up and running. I configured Allow Remote Desktop on all of them and have been able to connect to them and manage them via RDP since then. I also have two servers configured as Remote Desktop Services.
    That was up until yesterday. Yesterday afternoon I started getting the The requested session access is denied. I managed all Terminal services via Group Policy and have three users entered.
    I am connecting to the servers via Windows XP SP3 and Windows 7. Both clients have been updated to the latest Remote Desktop Services client.
    I have been searching for the answer, and I am not finding it.
    I have also tried KB954369 without any success. 
    Thanks,
    Brian

    Ok, from my trials and tribulations and discussions with Microsoft I have identified the following;
    Assumptions;
    A. My terminal server is in domain widget
    B. All the users are in domain contoso
    1. I had the Terminal Server configurured with a specific Login, which would launch a specific application only and not give them any desktop functions. Wiht this configured this way, I get the error I wrote about.
    2. If I turn the specific login off, then I can login normally and perform the functions as Administrator that I need/want to do.
    3. Microsoft said to configure the Terminal Server with Single Sign-on. I did as instructed and went thru all the steps, however because my terminal server is in domain widget, the users get prompted twice each time for login. Once on the website, and then again as the application launches. Microsoft said that the users needed to Remote Desktop Client 7.x or the self-signed certificate that I have has to be included in the domain contoso certificate authority so that they will not be prompted for the second sign-on.
    4. Conclusions - I need to have a chat with our enterprise security team about including the self-signed certificate in the contoso certificate authority. I need to also work on my RDWeb website so that it meets our company standard look.
    Here are the links that Microsoft provided;
    http://technet.microsoft.com/en-us/library/cc772108(WS.10).aspx
    Enable RDC Client Single Sign-On for Remote Desktop Services
    http://technet.microsoft.com/en-us/library/cc742808.aspx
    Blogs -
    http://blogs.msdn.com/rds/archive/2007/04/19/how-to-enable-single-sign-on-for-my-terminal-server-connections.aspx
    http://blogs.msdn.com/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
    http://blogs.msdn.com/rds/archive/2009/06/05/publishing-in-windows-server-2008-r2.aspx
    http://blogs.technet.com/pfe-ireland/archive/2008/09/05/windows-server-2008-terminal-services-presentation-virtualisation-and-windows-xp-clients.aspx
    I hope this help you in your troubleshooting.
    Brian

  • Adobe Acrobat X on Server 2003 (using remote desktop services)

    Hi guys,
    I need to purchase a copy of Adobe Acrobat for Windows Server 2003 for use in Microsoft Dynamics GP 2010, as well as everyday Acobat read/write tasks. There will be about 4 or 5 simultaneous users connecting to the server using RDP (via Windows Vista and 7).
    My question is, will a single copy of Adobe Acrobat X Standard suffice or work properly on Windows Server 2003 for all users?
    I can't seem to find any information on Adobe Acrobat X and terminal services (or Remote Desktop Services).
    Hope I've made sense, and any help will be appreciated
    Thanks
    -Rhydz

    Hi,
    What Word prompts when user attempts to login with the original account? Any error messages?
    Since the feature will work if you create a new account, have you ever compared the property of these two accounts? Maybe the security or permission setting during the creation process?
    We lack testing environment here for this kind of issues, and we have another dedicated support teams in
    Microsoft Office 365 Community. I would suggest you to post there, where you can get more experienced responses:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Thanks,
    Ethan Hua CHN
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Logging into Windows Server 2012 from Remote Desktop requires "Connect with Smart Card"; how do I disable this?

    I am using pretty much the default setup. I cannot figure out how to disable this. I do not want to use smart cards.
    Any ideas?

    Does this mean you're trying to RDP from an XP box, therfore have the Remote Desktop feature on the server set to "less secure"? Sounds like thats what disables network authentication, prompting the Smart Card request.
    If you simply click to login as a different user, you can login without a smart card, to include the same user as was being prompted for the card.
    I expect if you choose the Remote Desktop feature requires network authentication on the server, the smart card requirement goes away, but you'll need to login from Win7 or newer clients. Not sure where Vista falls, probably okay too.

  • Installing Windows Server 2012 RC Remote Desktop (ISSUE)

    Installing the RD Host Service doesn't work and I get several errors. Any Hints?

    You cannot be serious. I approached your Microsoft "Gold certified" software partner 'Cancom Germany' with the following requirement:
    - Need a Windows 2012 "Terminal Server"
    - for 15 client devices
    - currently no AD or other Windows servers installed
    What do I get sold:
    - Windows Server 2012
    - 15 Device CALs
    - 15 RDS device CALs
    and the information that I need to setup AD and the RDS roles. So far so good.But I run into these error messages when setting up the RDS roles.
    Now you are telling me that I need another server running just for the AD? Which I do not need for anything except for the internal requirement of the RDS services?
    Please elaborate a bit more on the way to get it work on the same machine or suggest another solution (btw buying another license for the AD server is not a solution).
    Totally agree with you. buying extra server just for AD or broker frustrated me. but I found a patch here
    http://support.microsoft.com/kb/2799605
    I don't know if it is too late, but hope it can help others

  • Can Thunderbird and Lightning be installed and used as a Windows Server 8 r2 remote desktop application.

    Can Thunderbird and Lightning be successfully installed as a remote desktop (terminal server) application on Windows Server 8 r2? In this scenario, users would access Thunderbird and Lightning via Windows (or Linux or Mac) remote desktop connection. Each user has there own home folder and profile on remote desktop server. I want to make sure that an individual user will be able to maintain individual email accounts, folders, settings, etc. as if Thunderbird and Lightning were installed on a stand alone PC. Any tips or things to watch out for in this scenario would be helpful.

    There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
    This is currently investigated and tracked via this bug report.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working
    <i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i>

  • Server 2012 R2 Remote Desktop Services Licensing

    I currently have a single Remote App server running on server 2012 (not R2). Let's call it Remote1 for simplicity.  I want to add a second individual server (Remote2) running it's own connection broker, gateway and session host on one machine. 
    Is it possible to do this while having Remote1 acting as the license server or would I have to add Remote2 to the server pool acting as a session host only?  Would purchasing Remote2's own set of CAL's make this work?

    Is the license server and the session host in the same domain? You don't have to put Remote2 into pool where you have Remote1.
    They both can act as seperate entity as you said. But if the only need is to have remote1 as a license server for remote2 then you can use the following method to specify the license mode and license server on remote2
    Configure the Remote Desktop Session Host role with to use the localRemote Desktop Licensing server. Follow these steps:
    Open an elevated Windows PowerShell prompt
    Type the following command on the PS prompt and press Enter:
    $obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
    Run the following command to set the licensing mode:
    Note: Value = 2 for Per device, Value = 4 for Per User
    $obj.ChangeMode(value)
    Run the following command to replace the machine name with License Server:
    $obj.SetSpecifiedLicenseServerList("LicServer")
    Run the following command to verify the settings that are configured using above mentioned steps:
    $obj.GetSpecifiedLicenseServerList()
    You should see the server name in the output.
    Hari Kumar --- Disclaimer: This posting is provided AS-IS with no warranties or guarantees and confers no rights

  • My keyboard doesn't work when I connect to a Windows 7 computer with Remote Desktop.

    I got a new computer at work that has Windows 7 Professional 64-bit on it.  I set up a Remote Desktop connection from my iMac at home and connected.  However, when I tried to use the keyboard, nothing happened.  After a little pecking I found that the DELETE key worked.  Also, I found that the keyboard would work correctly if I held down the FUNCTION key.  Very weird.
    My old Windows XP computer was still connected so I connected to it via Remote Desktop.  The keyboard works normally there.  It has always worked in Windows XP so I was surprised when it didn't work in Windows 7.
    I've been searching but haven't found anyone with this same issue.  Any help or suggestions would be appreciated.  Thanks.
    Steve Lockridge
    iMac 21.5 inch, mid-2010
    OS X 10.7.5 (Lion)
    3.2 GHz Intel Core i3
    12 GB RAM
    Apple Wireless Keyboard

    1. Did you use Bootcamp Assistant?
    2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
    3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
    4. What year is the Retina MBP?

Maybe you are looking for

  • Can I use the black ink cartridge only, & quit replacing the color cartridge when it's empty?

    I have an HP Officejet 6210 all in one printer that takes color ink (#95) and black ink (#94).   I only want to print in black and white.   The color cartridges are more expensive and since I don't want to use them, I don't want to replace it.  Can I

  • ITunes won't load when I click, not running in "task manager"

    I have a Dell Inspiron 1545. I run on Windows 7. iTunes was operating normally for me until recently... just a few days ago, I discovered that iTunes wouldn't load when I clicked on the icon on my desktop. I've tried clicking on it from the start men

  • InDesign CS6 DPS click and Drag feature?

    Hi I was wondering if in inDesign CS6 it was possible to make a click and drag application. So when the application is playing on an ipad you can click and drag images around the screen freely?

  • Can't import audio in AE 7.0

    After Effects Freezes up when I try to import an .mp3 file (I've tried multiple) ASlso I noticed that when I try to import audio, it tries to import it as a footage item, and there's no option to change it to just audio. Thanks all

  • No refund, but got emails to confirm them

    i recently refunded a couple of items that i had accidentally purchased and i have not gotten my money back. i got an email for each item i refunded to confirm that the refund had been successful, but i have had no money credited to me. please help!!