Audio set up crash

I/m just new to captivate and I use vista OS with a logitech USB headset but when I try record I get the following error. I don't have problems with other e-learning apps for audio recording though.
I have tried reinstalling the drivers and reinstall cap 4 and I have disabled all start up services. Any one any other ideas? Note on the audio test Cap 4 does not detect an input voice though the headset option is listed in the audio devices. In all non-cap scenarion input microphone works fine(?)
Happy to hear of any siggestions people might have - not a good start for me.

Hi there
And is your Vista of the 64 bit variety? If so, there are known issues (with no known solutions) on Vista 64 bit.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Adobe flash pro cc audio glitch and crashing.

I'm not sure if I'm doing something wrong or if this is a glitch with flash pro cc but I'm lip syncing a cartoon and have the audio set to stream so I can do so frame by frame but 9 times out of 10 when I click a frame and try listen to the audio from that point the audio just restarts from the frame I clicked, it's impossible to lip sync when it keeps restarting, any ideas what's wrong or if I'm doing anything wrong?
Some days there's that problem and other days if I press play on audio it moves two frames and freezes with no sound over the two frames then if you click pause and play again it will go another two frames and freeze again, hopefully it's just a setting I have wrong or something if anyone knows.
and it's crashing at least every 10 minutes when I'm inserting a blank keyframe too?
any help would be much appreciated?

Hi. I have the same problem using an HTC Incredible Android smartphone. The video/audio not in sync. Slight advance or delay. Not matching. I have the phone set to record as mp4, but when I use the file it says 3gp, so I transcode it to mp4. I have filmed a lot with my smartphone and now I have all this footage for over 6 months that may have this problem so I seriously need to know how to fix this or I have a ton of bad footage showing me in frame talking and it's not going to be right for YouTube videos of selfie-vlogging. So, I need to know the best, most fool-proof, most efficient, time-saving way to process and make it workable without taking too much time. Please share the very best methods which work 100% of the time. Thanks, JR
Message was edited by: XXJR2013XX

FCP 7.0.3 Easy Setup audio setting issues

I have created two custom Easy Setups.
SD:     DVCPro50 PAL with audio set @ 48.000 kHz, 16-bit, 16 chan
HD:     DVCProHD 1080i 25fps with audio set @ 48.000kHz, 24-bit, 16 chan
I open FCP, load the SD easy setup. I then click on Audio/Video settings.
Select "Audio/Video Settings" and view "Capture Presets Summary"
     - Audio format is listed as 48.000 kHz 16-bit 16-chan
Select"Edit" and "Capture Preset Editor" comes up.
     - UnderQuicktime Audio Settings:
          - Device: AJA Kona 3
          - Format: 48.000 kHz 16-bit 16-chan
If I then select the HD Easy Setup, and then "Audio/Video Settings"
Select"Edit" and "Capture Preset Editor" comes up.
     - UnderQuicktime Audio Settings:
          - Device: AJA Kona 3
          - Format: 48.000 kHz 16-bit 16-chan (THIS SHOULD BE 24-bit)
Select the "A\V Device" tab:
The audio device has defaulted to the 16 bit setting as well.
It appears that FCP or AJA is keeping the audio bitrate from the previous Easy Setup.
Even if we close FCP completely, and reopen into a new project, load the HD Easy Setup, the bit rate still shows as 16.
I have tried deleting the following:
apple.finalcutpro.plist
Final Cut User Data Folder
Thanks,
Mike

The camera definitely recorded in SP, that icon was visible on the viewfinder...
What settings should i be using in FCP to capture the video? From attempted research i found most comments suggesting to use a basic Firewire settings. i have used this in PAL format but the results are poor.
One thing I am confused about is the 32khz or 48khz settings. Which should i be using? I have an older version of FCE 4 where there are many settings for both 32khz and 48khz for DV FireWire but in FCP7 there are only options for 48khz.
Any advice would be welcomed at the moment.
I am also willing to upload clips of what I have to demonstrate visually the poor quality video I am capturing from the Canon

How does Core Audio set sample rate?

When I play a particular movie in QuickTime, the audio and video are out of sync. The movie plays fine on other computers.
This Mac Pro (OS 10.6.8) is used exclusively for Pro Tools and Final Cut Pro. The audio hardware is a Pro Tools HD Native card:
Native card --> Pro Tools Digital I/O boxes --> Lavry D/A converters --> monitors
The sample rate of the Digital I/O boxes is set by an external master clock, a Lavry Gold A/D converter.
I opened the DigiDesign Core Audio Manager and it says:
Connected @ 44.1K, 32 In/32 Out, Buffer Size 512
Yet the movie is at 48K (I know because I created it in Final Cut Pro), and the external clock is set at 48K. So, I don't know where the 41K in the Digidesign Core Audio Manager came from. This is why I am guessing the problem is sample rate.
Please help me understand what sets the sample rate.
Does the application using Core Audio set it?
If so, how is this made consistent with the sample rate set for the hardware by the external master clock?
Do I have to be sure I always change the external clock setting to be consistent with the movie being played?
BTW, I have not had a sync problem when I play video in Final Cut Pro..........it is always in sync. So, I have never worried about how Core Audio works. The sync problem is only with QuickTime.

Well, here is more information:
- I reinstalled QuickTime 7 and did many other things (trashed preferences,etc)
- I set the audio hardware (Pro Tools/HD Native card) to 48k
- I checked the Digi CoreAudio Manager and it said "Connected at 44.1K", even though the hardware was set to 48K
- I played the problem videos, and all are now in sync
- I check the Digi CoreAudio Manager and it still says 44.1K
- I checked the hardware and it is now set to 44.1K
I know that the videos are 48K, because I created them in Final Cut Pro X.
Does this mean that QuickTime 7 always converts videos to 44.1K, regardless of their sample rate?

Which Audio Setting for MPEG share for use on PC or burning to DVD???

I just "shared" a movie (a slide and video show with soundtrack edited on Premier Elements 8) to "Use for playback on this PC or burning to DVD" (created an MPEG). The audio export didn't work though. I used the NTSC DVD Standard preset that gives the 192 kbps, 48 kHz, Dolby Digital audio setting. Is this the setting I should use, or is there another audio setting that would work? There is just silence on the end product. Thanks for any help.

Now, are you burning to a DVD-data, or to a DVD-Video?
If the latter, then you can either Burn to Disc from PrE, or can Burn to Folder, and then use Roxio, Nero, or the great, free burning utility, ImgBurn to do the physical Burn.
Some time back, WMP had the DVD playability disabled for all burned DVD-Videos. Not sure if MS has added that back in. To the best of my knowledge, WMP has no burning capabilities in it, but could be wrong with the newest versions.
Hope someone else has ideas, and a better knowledge of most recent versions of WMP.
Good luck,
Hunt

When I sign into iCloud on iPhone the setting App Crashes

I sign into iCloud in setting on my iPhone. As soon as that happens, the setting App crashes. The same thing happens when I try to go to my mobile me email settings. The app Just crashes for no reason. How can native iPhone apps made by apple, crash when performing basic functions??? Is apple fixing this issue? I am not the only one complaining about this!

I figured it out, I had to delete all of my mail accounts from the iPhone and reinput them manually. But before that, I went into my iCloud setting and made sure everything worked and all my settings were on that I wanted on, then I added my other email accounts back on after.
I think it had something to do with the MobileMe account still having a presence within the settings and they conflicted with each other.
Hope that helps.

"ad hoc" audio setting?

I've lost the "ad hoc" audio setting, very important in the old version. Now I can't find it: incredible! Can you help me?

I'm talking about iMovie.

Audio setting option appears on New look Vsion

Has anyone else noticed this, if you disconnect your Broadband line from your New Look Vision box an Audio Setting box appears in Settings to set the S/PDIF output to Dolby 5:1 or Stereo. It promptly disappears when you re-connect your line.

When you click the first continue button, hold down the option key while clicking. It will then go to the manual setup where you can choose the type of account.
It is trying to use Exchange because that's what it thinks the email server is, based on what you entered as your email address.

MacBook Audio/Midi setup crashes in Midi

Hello all,
I have a MacBook C2D and a Korg Microkontrol connected via USB. The MacBook sees the MicroKontrol, but only as midi in and out instead of 5 midi ports it should have. When I click on the Microkontrol icon, Audio Midi setup crashes.
I would like to use the 5 ports - any ideas? I run Ableton Live and it sees all 5 ports and uses them.
thanks,
dustspec

Thanks for that Bob - The article was very helpful but I am still crashing. I'll have another look at the logs and see if I can find the problem.
My MOTU Ultralite is coming up greyed out in the midi devices section so maybe that is part of it?
dustspec

Speech Audio Setting Effects Timing

I'm having a timing issue when using the speech setting in
the audio settings.
If I use the "mp3" setting for the audio setting in the
publish dialogue, my narration (which is set to stream - not event,
so synch should stay tight), timing is just as I designed it.
However, if I set the audio setting to "speech" (in order to bring
the .swf file size down), the timing goes way astray. Nothing else
changes (the audio files are still set to stream, not event), and
yet the audio loses its critical timing.
Anyone else run into this problem, and more importantly, is
there a fix?

I think you've stumbled over a bug, or at least a use case that nobody in the Captivate design team considered when they were working out how Effects should be applied and timed (how to time something when you don't know how long it will be displayed for).
Essentially what the Effects need is the equivalent of the setting on other objects to Display for Rest of Slide. We need a way to Apply Effect for Duration of Object, regardless of what that duration might be.
You should log a Bug/Enhancement request for this.

Creative Cloud Set-Up crashes

Creative Cloud Set-Up crashes, what can I do?

The operating system is Windows7 32Bit.
The error message is:
Creatvie Cloud Set-Up failed
details shows :
Name der fehlerhaften Anwendung: CreativeCloudSet-Up.exe, Version: 2.8.0.447, Zeitstempel: 0x542b1c6e
Name des fehlerhaften Moduls: AdobePIM.dll, Version: 2.8.1.451, Zeitstempel: 0x543e90ac
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00010de5
ID des fehlerhaften Prozesses: 0x1910
Von: Jeff A Wright
Gesendet: Dienstag, 16. Dezember 2014 22:16
An: Lehrenfeld, Renate (Schlafhorst, Germany)
Betreff: Creative Cloud Set-Up crashes
Creative Cloud Set-Up crashes
created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright> in Creative Cloud Download & Install - View the full discussion<https://forums.adobe.com/message/7020965#7020965>

Captivate audio setting

Hi!
Can someone give me some guidance as to what settings I
should use for the following in order to have good audio quality in
recording without having the sound file size be too large :
Captivate audio setting:
Encoding Bitrate?
Encoding Frequency?
Encoding Speed?
I have no audio experience and am planning my recording via a
microphone. Many thanks!

Hello DesignerVA2007
Welcome the community
I do not know if any world agrees, but I publicom with exit
of of Bitrate in Near Cd Bitrate (96 kbps) and in Encoding
Frequency I put to 22.050 KHz.
My opinion is the next one will go away to turn road Internet
it will take when it very much took care with the size not to
become an exaggerated archive weighed for the user, for a good
training make different tests of exit until it finds a manageable
bo of publishing in the web without big much, now it will be going
to be turned in CD-Rom oh to be careful only with space limit of
the cd :)
goodbye

Won't recapture with new audio setting

when i initially captured some of my clips in FCP 4, i made the mistake of using the audio setting "mono mix".
since then, i've upgraded to FCP 5. i've also finished the project. now, i'd like to go back and recapture the clips, setting the audio to the proper setting of 2 separate mono tracks, the way it should have been in the first place.
i should note that "mono mix" did not result in one mixed down track; it captured two tracks of audio in a stereo pair, listed in the browser as "1V, 2A" with "1 stereo" but i suspect it mixed them in a weird way because they sound quite low and muddy.
in any case, i've been trying to recapture with a new audio setting. however, nothing seems to work. i've tried making all the clips offline, changing their settings with "modify", then recapturing with the audio toggled to 2 mono tracks... it still comes in as "1 stereo" pair. i've tried the other way, setting the log & capture settings to 2 mono, unchecking the "use current clips settings" box... it comes in "1 stereo". i've tried trashing preferences and redoing the above. i've tried putting the clips in a different project.
any suggestions? thanks.

apparently when you capture in "mono mix" it captures 2 tracks, but makes them identical mixes. so you lose all the phasing and mixing from the field and wind up with two dullish tracks. to unlink them wouldn't change this.
however, i think i figured out a way through a post on creative cow -- i exported a batch list of the offending clips and opened this in Excel. then i went in and changed the audio track column manually, to "2 Mono", then imported the batch list back into FCP. then recaptured using these new clip settings.
seems to work! (knock on wood).

Have you experienced this audio set-up: Focal Twin 6 Be

Have you experienced this audio set-up for a Mac (no receiver/amp): (pair of) Focal Twin 6 Be & Musical Fidelity V-DAC II

ff

Overlapping audio clips cause crashes

I have been stumped for days as to why my iMovie 6 project will not export to quicktime, camera, iDVD....nothing but garageband. Finally I decided to try exporting piece by piece to "full quality" dv files (dont be fooled by the name-these are compressed). I isolated the one clip which was causing iMovie to crash and it turned out there was an overlap in the main audio traack. I think that this had been created by doing a "cross-dissolve" transition. deleting one of the two overlapping track segments fixed the export problem.
now I can proceed with my impossibly sluggish project. I am going to try exporting to camera, then re-importing to see if it becomes a little snappier to work with.
Cheers
Dimitri

Good sleuthing! Thanks for that feedback.
Finally I decided to try exporting piece by piece to "full quality" dv files
(dont be fooled by the name-these are compressed).
Actually, the "full quality" export is exactly the same format has your project. There is no additional compression or loss of quality. The TYPE of Full Quality movie you get depends on the type of project it is. Each type of iMovie HD project exports to a Full Quality movie of its own type.
If yours is a "DV" type iMovie project, then your Full Quality movie won't look great played in QuickTime until its High Quality playback setting is turned on. Unless it is, you're not seeing all the quality that's there. QuickTime Pro is required to control all the playback settings of that type of movie. Absent that, if you have QuickTime 7 turn on the QuickTime Player preference General > "Use high quality video setting when available". The movie still will be a different aspect ratio, but it will look a lot better.
Note this is a playback setting only, which does NOT affect the quality of the movie itself.
It's called "Full Quality" not because it looks great, but because it retains all the quality of the original video. You can use a Full Quality movie to move video from one project to another with no loss of quality.
Karl

Audio set up crash

Similar Messages

Maybe you are looking for