Audio setting problem

When i opened enhancement its not working in my Lumia 520..its shows empty..can anyone
pls say hw to activate it..
Solved!
Go to Solution.

That is normal on the Lumia 520, it does not currently have an equaliser so you cannot activate it.
If you search the forum you'll see this has been discussed several times before.

Similar Messages

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

How does Core Audio set sample rate?

When I play a particular movie in QuickTime, the audio and video are out of sync. The movie plays fine on other computers.
This Mac Pro (OS 10.6.8) is used exclusively for Pro Tools and Final Cut Pro. The audio hardware is a Pro Tools HD Native card:
Native card --> Pro Tools Digital I/O boxes --> Lavry D/A converters --> monitors
The sample rate of the Digital I/O boxes is set by an external master clock, a Lavry Gold A/D converter.
I opened the DigiDesign Core Audio Manager and it says:
Connected @ 44.1K, 32 In/32 Out, Buffer Size 512
Yet the movie is at 48K (I know because I created it in Final Cut Pro), and the external clock is set at 48K. So, I don't know where the 41K in the Digidesign Core Audio Manager came from. This is why I am guessing the problem is sample rate.
Please help me understand what sets the sample rate.
Does the application using Core Audio set it?
If so, how is this made consistent with the sample rate set for the hardware by the external master clock?
Do I have to be sure I always change the external clock setting to be consistent with the movie being played?
BTW, I have not had a sync problem when I play video in Final Cut Pro..........it is always in sync. So, I have never worried about how Core Audio works. The sync problem is only with QuickTime.

Well, here is more information:
- I reinstalled QuickTime 7 and did many other things (trashed preferences,etc)
- I set the audio hardware (Pro Tools/HD Native card) to 48k
- I checked the Digi CoreAudio Manager and it said "Connected at 44.1K", even though the hardware was set to 48K
- I played the problem videos, and all are now in sync
- I check the Digi CoreAudio Manager and it still says 44.1K
- I checked the hardware and it is now set to 44.1K
I know that the videos are 48K, because I created them in Final Cut Pro X.
Does this mean that QuickTime 7 always converts videos to 44.1K, regardless of their sample rate?

Major "BUG" in Imovie 9 - Audio Sync Problem on Export !

Well I'm a hard-core Apple user from day one, but unfortunately today I'm not to proud about the latest version of Imovie 9.
It seems there has been a "MAJOR audio sync problem on export" in Imovie 9, since July 2009. Apple knows about this bug for a long time now, but didn't release any bugfix yet!
Here's what it's all about:
It seems if you use the (custom /manual) speed-adjustments and not the preset slider speeds, you will experience (after exporting your movie) annoying bursts of audio from clips that had been set to mude. The strange thing is that you will only experience this audio-bug after exporting, you will NOT experience it in the project playback mode!
Here's what you can do:
Find ALL the clips in your Project that are Speed Adjusted.
Instead of using a "Custom Speed" percentage, use any of the "Preset Speeds"
Preset Speeds on the Slider = 12.5%, 25%, 50%, 100%, 200%, 400%, 800%
Then, export your project as usual.
No more sync issues.
Really hope That Apple will come up with a real BUGFIX soon.
It's a shame that a major bug in a otherwise GREAT PRODUCT, hasen't been fixed yet!
What's wrong with Apple?...this is not one of their finest hours.
Still A BIG fan from Imovie HD,...I'll chance to Imovie 9 when the bugs are finaly fixed!

This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

Audio sync problem after scrubbing

I'm trying to piece together some clips from a TV series called Legend of the Seeker. I'm using Premiere CS4 4.0.1, Vista Ultimate 64-bit.
Placing the hour-long video in the Source Editor allows me to play the video fine from beginning to end, but if I start scrubbing through the file, the audio unsyncs itself immediately.
Here's a screenshot of the video in GSpot:
http://img14.imageshack.us/my.php?image=premieresync.jpg
Setting IN and OUT points and then dragging a very small clip into the timeline has the same result.
Any ideas would be very appreciated.

You are actually pretty lucky to just have Audio sync problems, though I do not know why scrubbing would make any difference. With both Xvid and DivX one more often gets no Audio, or no Video.
Agree 100% on the 3rd party conversion, prior to Import into PrPro.
Hunt

Space Designer Save Setting Problems

Space Designer Save Setting Problems
On the right side of the space designer you have "dry" and "rev" settings.
On reopening the plug-in the dry setting switches back to zero, although I saved it at a different setting...
Everytime, every project...

Does it do this on audio/software instrument channels and aux channels?
In general, when you load SD on an aux channel, Logic assumes it's going to be an FX return and so "helps you out" by setting the dry level to zero for you...
On other channel types it should work as expected...

CS4 audio sync problems

Hi all,
sorry if this question is old hat - I've searched the forums and can't seem to get a clear answer (most refer to CS3 and before) so thought I'd ask anew.
My preview in Premiere CS4 is fine, as is the preview in Encore CS4. The video was captured from four tapes (HD as mpeg and SD as Matrox AVI) in Premiere. The final DVD (10 minutes) consists of 21 clips. All but one are OK - this one has the voices well out of sync with the video, even though other clips taken from the same tape are fine.
I also had a major problem recently with an MP4 from youtube, which I guess is the same issue - everything else was fine, but this one clip was well out.
I'm guessing by now this is an old problem. What's the solution, please?
Thanks
Paul.

Newbie to Adobe here ...
Okay, so after spending over 14 hours trying to fix the audio sync problem I fixed mine. After editing my project I selected Sequence > Sequence Settings > Playback Settings > under Realtime Playback make sure the "Desktop Video Display During Playback" box is selected. Next, in "External Device" change the setting from "None" to your next option. Mine reads DV: 29.97 720 X 480i. Next, Under "Export" section in that same window select the in "External Device" select the DV option again. Also, you might want to "Disable video output when in background" ...select that box at the bottom of the screen.
Now, try recording the video to the tape ....my audio now sync's as normal. I hope it works for you.\
One more thing ... you can keep the "Desktop Audio" button selected.

Audio repetition problems

Anyone help with some audio repitition problems?
I am importing some .mov files taken with a Canon 5D in Premiere Elements 10. They are all fine when viewed in quicktime on my mac.
When imported into premier elements about half way through each clip the audio suddenly reverts back to the start of the clip. I have found no way to get the missing audio back (but I know its there from the quicktime viewing).
Is this an import problem? Any ideas on if I need to change a audio preferences setting?
Many thanks for any help.

There is absolutely no reason you should be having this issue, considering these specs, rm. The only bottleneck may be your external hard drive -- but I edit from my external to my iMac with no problems. Is your USB plugged into a dedicated port on your CPU or is it sharing a port (ie., plugged into the multiple jack or the side of your keyboard)?
But try shooting some sample footage and using Premiere Elements' Video Importer to download the footage from the camera to see if it makes a difference.
Also try putting the footage and your project file on your Mac's hard drive and working with it and see if still bogs down. If it doesn't, you know it's the external drive that's the problem.

Audio sync problem downloading VHS-C

I've downloaded a straight VHS tape (with no audio sync problems) into final cut pro once I had changed the Camera setting to 32Khz and the capture and sequeence presets to 32khz as well (it was all aout of sync when the settings were 48Khz).
The problem now, which is driving me MAD, is I have 13 hours of VHS-C tapes, which I have put into a VHS cassette converter to download and the audio is out of sync. The capture presets are the same as above (i.e. 32KHZ) . Why is this? I downloaded them initially at 48Khz (settings on the camera 48Khz and FCP at 48Khz in capture and sequence settings), but this was also out of sync.
Why is it different from one VHS tape to a VHS-C tape?
I hope there is a God out there that can help with this one?
Thanks!

Eagleray:
I capture through a ADVC-100.
I use to find the same problem playing VHS tapes with a standard VHS player from time to time and never solved it. The out of sync audio appears when capturing some specific tapes from specific sources:
- All my home tapes recorded in my old VHS recorder shows a audio problem; not specifically out of sync, but some audio "cracks" from time to time, like an electronic noise. No way to find a capture setings that works.
- Some customers VHS tapes that showed the out of sync (no noises) and again, no combination of digitalizer settings made it works. Had to resync the audio editing and stretching in an external audio editor or cutting shorts parts and syncing them with video. The our of sync appears in small captured portions, like 10 min or so.
- Never found a sync or audio problem capturing from VHC-C (the small VHS tapes) playing them with the tape adapter in the player.
I google long hours about this problems and all that I learned is that some old VHS recorders had not a "synchro" signal in the tape.
As I told you, I don't use any pro VHS deck, just my consumer "state of the art" VHS home recorder.
I hope there is a God out there that can help with this one?
I don't think HE visit these forums.

Audio Synch Problem Exporting From imovie 6

I have a created a large imovie project in imovie 6 using pictures and imported video. The project uses a lot of extracted audio voice overs on top of the photos.
While trying to export the video to quicktime or idvd, the audio gets out of synch at various points. I have tried exporting it many times using a variety of different options, and the audio remains out of synch, sometimes in different places with each export. Lastly, I have extracted the audio from the video clips for some of the more problematic portions of the project, but that has not proven successful.
The odd thing is that the movie plays perfectly while in imovie.
Any suggestions as to how to correct this issue?

Hi
Tedious situation.
To avoid this I'm kind of strict in Audio in two ways
A
• Material used if video is in same frame per minute - else I use JES_Deinterlacer to convert all to one standard. I use PAL = 25fps - one of my Cameras records ONLY in 30fps - (some people records in 24fps - to get a movie feel - I never)
So keeping the fps from Camera to (in my cases) DVD - gives a supperior result
B
• I'm strict in the kind of Audio formats I use - ONLY .aiff (or from miniDV tape Cameras) AND THEN 16-bit 48kHz or from Audio-CD (still .aiff as on normal CDs) and here 44.1kHz
If Camera is set to record in LP-mode or 12-bit Audio - Then I use an external Audio Editor to get this right
If from iTunes - I never use this directly - BUT - collect needed audio into a New PlayList - BURN THIS as a Standard Audio-CD (NO .mp3 - but .aiff here too) and then use the files on this CD in my movie project's in iMovie HD6 or FinalCut any varsion (or if forced to - iMovie'11)
Else read this
Audio Sync problems
• 12.bit - should be 16.-bit (from miniDV tape - set Camera right)
Avoid recording in LP-mode on miniDV tape. This tape must be play-backed by same Camera. When Camera dies
so does the video material in worst case.
• .mp3, .avi etc strange file formats - should be converted to .aiff 48kHz 16-bit
• in iMovie (up to HD6) - do - Extract Audio - it most often helps
• from iTunes - collect into a PlayList then Export out as an Audio-CD (not .mp3) and use the files on this (.aiff 44.1kHz)
• There seems to be a problem with slow-down resp speed-up. Has to be in specific steps as 25% 50% 150% 200%
else problems will arise
• Audio problems when transitions is in use - especially iMovie HD/HD6
a. Select video clips
b. Extract Audio (Advance menu/Extract Audio)
c. Now apply transition
d. eventually fine-tune end and start of extracted audio clips
Yours Bengt W

Audio Recording Problem - distorted

Hey all,
I got an audio recording problem here...
When I try to record audio onto my project, the sounds is very poor and distorted. Plus, there is a pretty ugly delay. But when I use garageband, the sound is great and how it should be. So this makes me think that Logic has some sort of problem with my driver (Firebox) or somethin'.
Here's my Setup
-imac G5
-Logic Pro 7.2 (Bought just a few days ago)
-Presonus Firebox (audio interface)
-Condensor Mic
Cheers!

Hi,
It is possible that your FireBox is not the audio card set up in Logic, and that you are accidentally recording the built-in mic.
If Garageband is seeing your FireBox corrctly, then it is the setup in Logic, and nothing else, that you should be looking at.
Check your audio hardware and drivers.
Cheers

"Audio configuration problem" on one machine, not the other

I have a laptop and a desktop both with Vista Home Premium SP1. I have ITunes and Quicktime on both. I can run ITunes on the desktop without getting the "audio config problem" message, but on the laptop (Toshiba Satellite A215-S5837) I have tried the fix (uninstall and re-install QT) with no luck. At first I thought the problem was fixed, but after turning the machine off and back on, the problem is still there.
Any help?
Thank you,
Dave

Unfortunately, the noir household Vista box is in a different hemisphere from my current location (it's in North Carolina), and I can't doublecheck the way that the Audio control panels are set up on Vista.
... but in XP, the first thing I would check on with a recalcitrant "audio configuration" error would be if the correct default device was showing up in the "Sound playback" area of the "Audio" tab of the "Sounds and audio devices" control panel.
Can you find such a location in your Vista control panel on the PC getting the "audio configuration" error?

After Effects CC audio mapping problems

Whenever I start After Effects it seems like it takes over control of my system audio output settings.
For instance if I am listening to a song on iTunes and then start After Effects, I will only hear iTunes when AE is active from then on. Audio preview and scrubbing in After Effects works well, and all other audio works as they should but only when using After Effects. If I switch back to iTunes it goes silent. This goes for all other audio on my computer.
To get the audio back I need to go into system preferences and swich back and fourth in my settings. But if I then go into After Effects again the problems are back. It feels like After Effects hijacks my system audio setting when it is started. Is there a way to prevent this from happening?
I am running After Effects CC 12.2.1.5 on OSX Mavericks.

Hey there, I'm having the exact same problem (Mavericks 10.9.1, AE 12.1).
I use an H/K AVR 165 with 5.1 as my default audio device (HDMI). Are you using HDMI as well? Because every other connection works (cinemadisplay speakers, optical), only when I have HDMI as my default the remapping occurs.
Waring: don't try to pick After Effects (12) or Premiere (7) as default in the sound-options in osx preferences (not the MIDI device, the aactual sound output in the preferences), I tried this yesterday and at first I thought it worked (I picked Premiere, I was just testing and curious) but as soon as I started Premiere, the whole system crashed and i needed several safe boots to get my Mac working again (it froze right after the login).

Speech Audio Setting Effects Timing

I'm having a timing issue when using the speech setting in
the audio settings.
If I use the "mp3" setting for the audio setting in the
publish dialogue, my narration (which is set to stream - not event,
so synch should stay tight), timing is just as I designed it.
However, if I set the audio setting to "speech" (in order to bring
the .swf file size down), the timing goes way astray. Nothing else
changes (the audio files are still set to stream, not event), and
yet the audio loses its critical timing.
Anyone else run into this problem, and more importantly, is
there a fix?

I think you've stumbled over a bug, or at least a use case that nobody in the Captivate design team considered when they were working out how Effects should be applied and timed (how to time something when you don't know how long it will be displayed for).
Essentially what the Effects need is the equivalent of the setting on other objects to Display for Rest of Slide. We need a way to Apply Effect for Duration of Object, regardless of what that duration might be.
You should log a Bug/Enhancement request for this.

Z68A-GD80 G3 rear audio port problem

Just built his system a couple of weeks ago. My first build. When I first started the system, I was using the integrated graphics. I had my speakers plugged into the green audio jack on the MB, and it worked fine. Used it like this for a couple of days while transferring programs, photos, etc. I was never able to get the HDMI port working to set up both monitors, so I removed the graphic card from my old computer (GE Force 210), installed it in the new computer and installed the NVIDIA drivers for it. This got both monitors working, but then I found the sound was not working. I tried connecting the speakers to the surround sound ports and they worked, but at a very low volume. I finally connected the speakers to the front speaker port. This works but the sound quality is not very good. I get random? static noises.
I had it this way for a few days while I tried to troubleshoot the problem. It seemed like the problem started after installing the graphic card and drivers, so I removed them and tried it again. Still the rear speaker port did not work. Also, at this time I tried to get the dual monitor setup working again. I had found that the IGD multi-monitor setting was disabled, and assumed that was why I could not get both monitors working the first time around. After enabling this setting, still could not get both monitors working. No HDMI. I am really not too concerned about this, as I plan to get a better graphic card, but thought that it might be related to the audio port problem.
I believe there is a newer version of BIOS, but I am not sure if that is something that I want to tackle. Does anyone have any ideas of what could cause this? Thanks.
Monty

Not real sure of this since I haven't been personally involved in it, but the HDMI problem could be related to a cable issue? HDMI 1.4 versus older types? Monitor v1.4 compliant, etc.?
A battery removed CMOS clear & reset may be of help. It's worth a try. If the sound was clear & worked normal before, I doubt a UEFI/BIOS update would be of benefit. Something hardware related, drivers, or the way the OS is responding are my guesses for the sound problem & static.
A corruption in Windows is always a possibility. Doing a fresh install of the OS may help. Maybe before that extreme, using a utility like driver sweeper to get a fresh start with the audio drivers. Presume the speaker system is a self powered unit?

Audio setting problem

Similar Messages

Maybe you are looking for