Audio Sound and Video Sound separate Please Help

Hello,
I'm having problems with lowing down the volume of an audio
sound (mp3
sound attach) without affecting a video (streaming) sound
volume.
It seems that flash assumes that the Sound volume controls
all sounds in
stage.
Can anyone help?
Thanks

Please don't reply.
The problem was that I never refenced a especific target for
each instance
of Class Sound
var myVideoSound:Sound = new Sound ( myNetStream );
var myAudioSound:Sound = new Sound ( mcAudioSound );
"SteveStall" <> wrote in message
news:e80bl2$3af$[email protected]..
> Hello,
>
>
>
> I'm having problems with lowing down the volume of an
audio sound (mp3
> sound attach) without affecting a video (streaming)
sound volume.
>
> It seems that flash assumes that the Sound volume
controls all sounds
> in stage.
>
>
>
> Can anyone help?
>
>
>
> Thanks
>
>
>
>

Similar Messages

After Effects CS6 renders audio and video separately. Please help!

Trying to render a finished video so that I can upload it to Youtube, but having extreme rendering difficulties. The only way my audio and video are combined in one file is when I export the project as a lossless AVI. Best quality for sure, but the size is MUCH too massive. Any other format I try always separates the audio and video. I have no idea why. Any help or suggestions are greatly appreciated. Thanks!

Sure thing, here you go. If there is anything anyone else needs to see please let me know.

My MacBook won't turn on at all. magnetic light is on ,battery light on but no sound and screen is black. please help

can't turn my MacBook on I've got a black screen, no sound, battery light on back is on and so is led magnetic light. I have taken battery out and reset and nothing. please help any suggestions would b greatly appreciated

Try resetting the SMC. This page has the instructions - you have to scroll down about a thrd of the way through the page:
http://support.apple.com/kb/HT3964

Using Photo and Video on iTunes: Please Help!

Hi, just bought the iPod video. Managed to transfer pictures to it, but cannot see them on iTunes. I can on the iPod, but cannot on computer through iTunes. Is this possible to do? If not, how do you delete pictures you do not want to include for example?
About videos: am I correct thinking I can add my own only if I upgrade to Quick Time Pro? Apparently is a really bad software and doesn't really work.
Please help me if you can I have tried the help functions and read for ages, but cannot find answers. Thank you

There are two places to change automatic sync. The first one is in iTunes, once you have opened the program, go to Edit>preferences>Syncing tab, and check the box that says, "Disable automatic syncing for all iPhones and iPods". The second place is after you have connected the iPhone, in the middle of the Summary page, there are three checkboxes, and if memory serves, the first one is Automatic syncing.
In reading your post, maybe when you did the sync, you lost some information? Your contact information should have been saved to your contact manager, depending on which OS you use as to what it would be. Music, etc. would be in your iTunes library. Am I reading you correctly?
Hope this helps you and/or answers your question.
You have to change both to disable automatic syncing.
Message was edited by: ChrisJ4203

I really need emergency iphone help- please- it has gone into restoration mode and wont come out unless i click restore- if i do will i loose all my photos and videos etc? please help!!!

i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
what should i do anny coments or ideas please let me know!

The first step in the upgrade process is a backup.
Did iTunes not create a new backup when you first connected it?
You really should be syncing your device and copying pictures off of it on a regular basis.
Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
At this point, you only option is to restore.
Also, in the future, ensure your laptop is plugged into external power before starting upgrades.

Audio skipping and programs quitting unexpectedly, please help

Hi all, I have a Power PC G5 running on OSX 10.3.9. I came into my room this morning to my fan running at an absurd speed and the computer was frozen. I restarted the computer, but the rest of the day, my audio has been skipping constantly (on itunes and also when played through Firefox) regardless of how many programs I have open. I have never had any issues with this before. I'm also having problems with programs freezing today and with programs quitting unexpectedly.
What caused my fan to go nuts? The tower is sitting in a pretty dusty area, so it is possible that there is dust around the tower. I have no experience opening or cleaning a computer, so if that is what I should do, could you please instruct me on the best way to do that.
I have about 40gb free with 110gb utilized on my Macintosh HD. The activity monitor shows that I only have 130mb Free of system memory (when I'm only running itunes, activity monitor, and firefox). The activity monitor also jumps from having abou 85% of the CPU idle when it is working fine down to below %40 percent when the audio is skipping. What is causing these jumps?
Thank you for your help.
Max

Let's start with the basics.
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
 Cheers! DALE

How stop ambient sound when video sound starts?

I play ambient background music in my movie. I've written
Actionscript to attach an mp3 and control the overall sound volume.
The code to control the overall sound is:
_global.allSounds = new Sound ();
_global.allSounds.setVolume(50); for example
However, in my movie there are also video clips (w/sound)
that I have embedded using the FLVPlayback component and one of the
designer skins. The problem? I don't know how to stop the ambient
music when the user clicks the "Play" button on the skin. Both the
ambient sound and video sound play at the same time creating a
cacophony. And if the user happens to click the "mute" button on
the skin, my _global.allSounds.setVolume() commands have no effect.
How do I integrate the way sound is controlled by
Actionscript vs. the way it is controlled by video components?
Thanks.

The obvious answer would be: remove the Beep VI that's probably in there. Please show us your code.

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Post this in the iPod Touch forum.
https://discussions.apple.com/community/ipod/ipod_touch
B-rock

I recorded a video when my phone was on silent mode. There is no sound on the video. Is there any way I can get the sound on the video?? Please help!

I recorded a video when my phone was on silent mode. There is no sound on the video when I play it. Is there any way I can get the sound on the video?? Please help!

I have tried turning up the volume and it still doesnt work, I think I have tried everything possible and still no good!

My key sounds and lock sounds no longer working, have tried everything!! Please help?

I have only had my iphone 4s for two months. The key sounds and lock sounds not working, happened after plugging it in for charging. It's all switched on in settings. Now it only vibrates when a message comes, or new mail etc, even though I have tones set it doesn't play them. I have done a full restore and hasn't worked either. I have also noticed the amount of power has disspeared (number) now too. What should I do? Thank you!

Thanks, power icon all sorted. But I still can't get the sounds back. I tried that reset at the beginning and it hasn't worked. Tried it again, still the same. What should I try next? Remember I've already tried a system restore. Nothing is working! Don't know what to do next?

Equium-A100-147 - broken sound and video

Hi everyone,
I have the Equium A100-147, Its been working fine for last couple of year.
But in the last few weeks has get problem in sound and video (broken sound and video).
The sound is breaking and sometimes uable to listen + video breaking and so much delay due to its get so slow with so much sound distorsion etc..
This remains after new installation (format HDD) of Wind XP unable to fix even installed new drivers.
The Device Manager shows all drivers including audio and video working ok, d'nt know what's problem please help me.
Thanks.

Hi
Something like that can happen during high HDD activity this means that the reading/writing process could affect the sound/video playback
But usually this should not take long time
At the other hand this can happen because of higher temperature
High temperature can affect the CPU and GPU performance
I think you have used this notebook for couple of month without any troubles in my opinion you should check if cooling modules and fans are clogged and could remove the dust and debris from cooling modules use compressed air spray this helps p get rid of dust
Maybe then the notebook will run much better

URGENT- DOING MEMORIAL VIDEO sound and video are off when sent to iDVD

I watch the video in iMovie and the sound and video are in sync. When I send to iDVD, the two are no longer in sync. I have made changes to the iMovie project since my last DVD burn. With the initial burn, there were no sound issues.
I've tried all of the following:
1. closing and reopening iMovie and iDVD
2. resending from iMovie to iDVD
3. readding the clip and removing the original clip from the iMovie project
4. restarting my computer
The only things I have not done are the following:
1. redownloading the original video clip from my camcorder
2. recreating the project
3. trying a different project to see if that one has the same audio/video issue (this will be my next step)
#2 above is literally so intense as I have a lot of editing on this. To make it clear to you, I have video footage of a memorial.... and after the memorial I chose little 20-30 second clips here and there. I don't have audio with those clips -- just iTunes music overlay.... so, those I don't need to worry about sound coinciding.... just the 30 minute clip that is the actual memorial service.
This is time sensitive.... it is a memorial video and I don't have time to redo the thing from the beginning, especially considering how long it took me to find those 20-30 second clips of the post-memorial.
Please help!

Yes... I had seen that.... and, yep, have the latest software.... and even rebooted my machine thinking that maybe it hadn't been restarted since the update (can't remember how long ago the update was).
I did a test run with a mobile size (it takes over an hour when I share with iDVD, which has been annoying with all my attempts to "fixing") file sharing with media browser and still the sound was not matched.
I started another project alltogether in iMovie and it does not have the sound issue when sent to iDVD....
I can copy and paste the more difficult editing I did between the "bad original copy" and my "do-over"... but, it seems to not copy exact length of each clip (it decreased it by a second each clip on the ones I copied over but that is weird since it did copy over the slowed % I had on the original) ..... see the more complex editing I have has the sound silenced and I have music overlay on that....
I have many more to go... and can't copy text directly from one project to another... in fact, there is a lot you can't just copy over.... I have to redo the music, special effects etc. This is not going to be a walk in the park if I can't find a way to make my "bad original copy" work.
Still looking for more suggestions (than to start all over), but will have to start over if I spend too much time making the one I have work.... then it becomes more sensical to just start over. I have quite a bit of time in the original, but if I can copy and paste the clips, that takes a majority of the work out.... but, if any of my copy and pastes somehow "corrupt" the sound sync on the portion that isn't silenced and music overlaid, then, there is a lot of work having to recreate all my edits from scratch.

Loss of sound and video playback on ENVY X2

Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...

Hi Brumage,
I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
What operating system are you running? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

[Python pygame] Graphic equalizer - keeping sound and video in sync

Hi!
I'm writing a graphic equalizer in python and I want to use pygame for the video and audio output.
The video display of the moving bars works great, now that I have a correct way to read samples and decode them.
The problem now is: they're way out of sync with the audio playing in the background!
At the moment my code, that draws the bars basically looks like this:
# loop as long as we can get slice of the audio file for the fft
for n_frame in range(0, len(framebuffer), fftframesz):
clock.tick_busy_loop(t_loop)
# t_loop was defined as fftframesz over total_frame_count
# which means in words: t_loop is the amount of FFTs per second - or the cycles of THIS loop
# grab the frames and perform the fft here
...numpy.fft.fft...
# set the new bar heights and draw them
for bar in bars:
bar.update()
# if playback has not started yet, make it so
if not pygame.mixer.get_busy():
musicfile.play()
The way I'm thinking, this should be enough to keep sound and video in sync. Because we know the time that one cycle should take at most,
we can set the clock to tick_busy_loop this time. This way we make sure that the video is not faster than the sound.
But to me it seems that is is the other way round, i.e. that the video is slower than the sound. I already did some timing, but to no avail.
Is there perhaps a more easy, more elegant way to make sure that image and audio are in sync?
Any help is greatly appreciated!
Last edited by n0stradamus (2012-10-01 18:36:53)

Thanks for your ideas. I assume you mean I should go with a $1200.00 final cut pro software. NOT.
Sure the video will be on myspace and youtube but wether they are noticed or not is not as important as self satisfaction. I can easily split scenes into equal time zones as I said. Then drag them into clips and back all using the same camcorder. Multiple cameras and angles would be nice but this can be done on a low budget and still look good. I guess my original questions were not answered. Is there a way to determine the length of a transition and shorten the clip by that amount. Or the length of a still shot and do the same. Or perhaps they have been answered and the answer is NO WAY, and I am just not hearing it.
I suppose reimporting a video would be great if I could use two timelines like in audio and then blank out what I don't want in the first. But I just don't think this is possible, or is it. I've been reading iMovie HD6 The Manual that should have been in the box. It's a help but doesn't take you from the beginning of a project to the final project. Exporting to imovie or idvd is not an issue. BTW I got the clips in sync as I said by leaving blank spots and placing effects over them. I could insert the proper length video in those spots but that can look silly without transitions. But then again so can transitions. This stuff is very fun and interesting and a great learning experience. If I stop now as you suggest then I am not pushing myself to the limit. But thanks for your reply.

Sound and video are choppy since installing Flash Player 11.3

I'm having a problem here! Since I updated Adobe Flash Player 11.3, the audio and video are all choppy when I play Adobe Flash game apps in Facebook! Even when I disabled hardware acceleration, the sound and video are STILL choppy! Even I watch a YouTube video and the sound and video are a bit choppy! There's DEFINITELY some sound issues in Flash Player 11.3! I'm using Firefox 13 in Windows XP SP3. I'm wondering if you have any answers for the sound issues in FP 11.3.

I went through an annoying password reset process to post on here, haha, I was experiencing this issue and managed to resolve it for a flash animation I was making that was going to be sent out; thus fixing it for myself wouldn't change things for others. I know this is old, but if anyone is in this position, I hope it helps.
I was using Swish Max for my scenario.
Under the Export Settings, I found that by default it was using SWF Version: SWF8 - when it had the option to go up to SWF10. I changed it to 10, and set the hardware acceleration to Level 1 - Direct.
I exported, and it still didn't work. The music was choppy as heck and terribly inconsistent with speed. I even created a preloader, which appeared to work but didn't resolve my issue.
FINALLY, I kept it at version 10, and found that it had an option that said "Preload Content: Disabled." I set that to "At Preload Frame" and though I had a loading animation setup to do the preloading, I still placed a preloadcontent keyframe at frame 1. Then I set Hardware acceleration to Level 2-GPU and exported.
IT WORKED. The terrible, seemingly non-fixable audio cracking lag was gone and it worked flawlessly.
Hope this helps someone, I originally found this when I was trying to find a fix for the issue.

Audio Sound and Video Sound separate Please Help

Similar Messages

Maybe you are looking for