Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

Welcome to the Apple discussions.
First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

Similar Messages

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

My sound is not working after downloading windows 10

My sound is not working after downloading windows 10 please can you help me?

right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

[SOLVED] Sound (snd_hda_intel) not working after resume from suspend

Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
Running the following brings back the sound, but that is obviously a hack:
fuser -k /dev/snd/*
rmmod snd_hda_intel
modprobe snd_hda_intel
/etc/rc.d/alsa start
I have on my /etc/modprobe/50-sound.conf:
options snd-hda-intel model=laptop
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
Here's the exact hardware specification:
# lspci -nnv|grep Audio
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Any idea where to look for this?
Last edited by yhager (2009-08-21 16:54:00)

[SOLVED]
I downgraded to kernel 2.6.29 and the problem is gone.
Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

Alerts sounds are not working after upgrading to iOS 7.1.2

Hi,
I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

I got this issue resolved.
It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
It has been fixed by cleaning the charger slot by toothbrush! with some
drops of a cleaner.
Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

Multicam source sequence - audio offset does not work when syncing via audio

Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
Unlesss I'm missing something?

I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

Audio Science ASI5111 Sound Card not working with Aud. 3 Multi-track

I am using an Audio Science ASI 5111 Sound Card. I also used Audi
tion 3.0.1 on Windows 7.
The program suddenly freezes when using the ASI driver (not Audition driver) in Multi-track mode.
At times I get the R6025 error

Audio Science is aware of the issue. It has been solved by going back to an older driver. 3.12.07

Sound card not working anymo

Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
[Computer One]
Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
"OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
[Computer Two]
I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
I really have no idea what to make of this, any help is appreciated

Hello. i've been working on this for the past 5 hours, but i've taken a breath and now i'm going to post here to see if any one can help me out. Im working with 2 computers, heres one:
[Computer One]
Yesterday, i first noticed that when i plugged in my microphone (a new one i bought) to the sound card i have (Audigy 2 ZS Platinum), it crashes my computer.
Today, i tried a newer headset, a USB one, and plugged it in. (these headsets are logitech). The microphone works good (while plugged into the card, but then i have like maybe 2.5% volume (very very, very low) in the headphones. I checked my system volume, i changed around EVERY thing to see if i could get the phones to work, but no sound from my voice chat server (Teamspeak) would play at any hearable level. (i know it worked because they yelled and i could hear them, a little).
So after that all does not work, i plug in my old trusty headset (to the front dri've bay i got with my card) and then i start getting ERRORS and stuff when i open teamspeak, heres the 2 i get:
"OpenDevice Specified device identifier is out of range", then I hit OK and it gives me: "waveInGetDevCaps Specified device indentifier is out of range".
I then uninstall my drivers for the sound card, and download these: SBAX_WBUP2_LB_2_09_006
When I try to install them, it says something like: please make sure your sound card is installed correctly, or something of the nature.
[Computer Two]
I install my old Sound Blaster Li've 5. card on my second computer, and i download the drivers for it, and it says the same thing when installing drivers: "make sure its installed correctly," like my Audigy 2 ZS Plat. Thats when it hit me, there has to be something i'm doing wrong here, how it could give me the same error on 2 machines?
I really have no idea what to make of this, any help is appreciated

Sound Card not working (resolved)

I've got a new system, and the integrated sound card on it isn't working, so I swiped the PCI sound card from my old computer and inserted it. And it's not working. I've pretty much tried every method on the troubleshooting section of ALSA's page on the wiki, without any luck. And yes, this includes unmuting and setting the volume of the sound channels.
Last edited by Falcata (2008-02-08 04:07:53)

I already knew that I had two cards. I added in the second one because the integrated chip wasn't working. Anyways, here's the results of lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 04)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04)
00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
04:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
04:02.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Last edited by Falcata (2008-02-07 22:55:42)

Pavilion dv5020ca sound will not work after updating xp to vista home premium

HP Pavilion Dv5020ca windows vista home premium
After upgrading from xp to vista the drivers for my sound card will not install and the error message i recieved was
cannot find media any help would be apperciated
This question was solved.
View Solution.

Hi:
See if installing the XP audio driver works...
Download and run this driver. If it automatically installs the audio, great. If not...close out of any error windows.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&dlc=en&lc=en&...
Go to the device manager and click on the multimedia audio controller needing drivers.
Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
The select Have Disk and browse to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver installs.
Then reboot.

T410 - Sound card stopped working after Lenovo System Update

hi all!
yesterday I performed a system update trough the ThinkVantage System Update 3, I chose a complete update (even the BIOS).
After the update, the sound card is not working anymore: everything in the control panel looks fine, volume is up and all's connected, but no sound is coming out, with the exception of the skype system sound when starting/quitting the application...
No system restore is possible (it looks disabled by our IT dept), updated the drivers via windows update, but no help.
Any clue?
Thanks in advance!
Riccardo
Solved!
Go to Solution.

Remove the audio-driver via Controlpanel - Add/Remove Software
Download the audio driver from Lenovo
Install the driver manually
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Cirrus Logic sound card not working - Just a quick question (iMac 27-inch)

Hi, so as many have experienced, my sound card is not registering on my new iMac, on the Windows Vista side. I get sound out of the Mac side, just nothing from Windows.
I was wondering, would a USB sound card or sound pod solve the problem? I am not amazing with computers... But would buying one of those be a possibility?
I was looking at something like this...
http://www.emicrophones.com/p-1230-andrea-pure-audio-usb-sa-full-duplex-usb-soun d-pod.aspx
If anyone who knows what they're talking about could give me some input on this, it would be greatly appreciated. I do a lot of video editing on the Windows side, so having no sound would be an extreme burden.

Hi - I had this problem when I installed WIndows Vista (32 bit) on my i5 iMac. I believe I resolved the problems by finding the drivers on the OSX install disk. What I am struggling with is updating the video drivers - but that is another story...
Steve

Sound effects not working after upgrade

After upgrading to Yosemite, my system sound effects are no longer working. Instead of hearing my selected Basso sound, my entire screen flashes. Other sounds, such as the audio track of a video, still work fine. If I use the "afplay" command I can hear a system sound. I also get sounds for incoming and outgoing mail. But clicking one of the system alert sounds in the "Sounds" preference pane does nothing audible, and in other places where I used to get a Basso sound, my screen flashes instead. I'm aware of the Accessibility option that gives the screen flash in lieu of an audible alert, but that is turned off, and I have tried turning it on and back off again, to no avail. My "Alert volume" is all the way up in the "Sounds" preference pane, and I've slid that back and forth too.
Can anyone suggest a way to reset whatever got confused in the upgrade, and get my alert sounds back?
I'm on a 13" mid-2009 MacBook Pro, if that matters.
Thanks!

I had same exact problem - Reset PRAM and not works fine. I followed instructions here, and step 5 fixed it: http://www.iphonetopics.com/no-sound-after-upgrading-to-os-x-yosemite/

Satellite Pro U400-15I - Sound Wheel not working after Windows 7 install

The sound wheel on my Satellite Pro U400-15l does nothing after the Windows 7 clean install from XP pro.
I used the recommended Software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - just not under the control of the wheel! Also the Toshiba Power control is not there but this is not a problem.
Any suggestions welcome.
Bob Sheppard

Hi Syntax,
there is no option to add the volume control to the taskbar in the control panel.
The sound driver is 'Conexant High Definition Smart Audio 221'
Interestingly, when I click on the speaker icon on the taskbar and select the mixer option I get 3 sliders called 'Device','Applications' and 'Sound Volume Indicator of Toshiba Control'. If I move this slider with my mouse I get the indicator I am looking for ( The Toshiba indicator I had under XP). However, this slider only works as a 'minimum' for the other sliders.
Thanks for your help but I still would like that volume indicator back!
Bob Sheppard

Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

Similar Messages

Maybe you are looking for