Audio sounds horrible after installing iTunes vers 10.5. How do I restore the audio quality?

How do I restore audio quality after installing iTunes version 10.5? The audio is high-pitched and metallic.

I wish i knew, no feedback or help forthcoming from apple yet

Similar Messages

  • After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    I hope it doesn't effect how I down load my itunes to my ipod and iphone.
    No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

  • Sound Issues after installing iTunes 7.7

    I installed itunes 7.7 on my Powerbook g4 this morning and lost sound. When I open preferences, it says I have no internal output device installed? What's the fix?
    <Edited by Moderator>

    I ran disk utility from my Leopard DVD, repaired the disk. The sound worked upon restarting.

  • After installing itunes 11.01.12 air-play doesnt work. the button is gone. already did everything on the checklist, everything is updated, like the receiver and apple tv3, but itunes can probably not see them?

    after upgrading to iTunes 11.01.12 the air-play button disapeared. the apple-TV3 and the receiver can communicate, but in my computer there is no button to play on any other speaker/unit. it seems that iTunes can find them. i did everything on the checklist, like check that all units are connected to the same wifi and have the latest firmware.

    after upgrading to iTunes 11.01.12 the air-play button disapeared. the apple-TV3 and the receiver can communicate, but in my computer there is no button to play on any other speaker/unit. it seems that iTunes can find them. i did everything on the checklist, like check that all units are connected to the same wifi and have the latest firmware.

  • Windows Xp bad sound quality after installing itunes 10.5

    After installing itunes 10.5 to be able to get the ios5 update my itunes plays every file with really bad, distorted quality. I try other players even Quicktime works fine. What could be happening?

    Try to download, and install the latest Realtek HD Audio driver.
    Here is the download link:
    http://www.realtek.com.tw/downloads/
    Select the second options (High Definition Audio Codecs (Software))
    And when you install this, i think everything will be good.

  • I am not able to add video files to my itunes after installing itunes 10.7

    I am not able to add video files to my itunes after installing itunes 10.7.0.21

    I Have been using, Ipad for only around a month or so (Ipad 2), and it was only yesterday that i tried to use the Itunes. I first downloaded the latest itunes (10.7.0.21), and took backup of all my Ipad data.
    After this, I wanted to add some video to my ipad, as it was essential to add the same to My itunes first, I roceeded to do just that. I went through this command {File - Add File to Library}, and then went on to select the Video file. There's just a flicker, and then nothing happens at all - the itune screen remains, and there is no error message too. Whereas, I can easily add Audio Files.
    After this, I even downaload the latest Quick time (7.7.2), as I had read somewhere that the same is necessary. When I tried to open the Video file in Quick time, it did not open. After that I downloaded the codec DivX and DivX player. Though the Video plays in DivX, it refuses to open in Itune and does not play properly in Quicktime (slider moves, but sound and video is not there).
    Frankly, I am utterly confused.
    Regards, Shekhar

  • No cd drive after installing itunes

    Hi,after installing itunes to my packard bell notebook i noticed that i had no cd drive showing in 'my computer'when trying to start my cd writer it showed 'no recorder'.i've had to uninstall itunes and download a update from roxio to get my cd writer back again.please can anyone help me with this problem.also is it possible to sync my ipod nano with windows media player without installing itunes.
    Regards,Tony

    No you can't use WMP to sync your iPod.
    You could take a look at Yamipod which allows you to manage your iPod without iTunes, but why not try and get iTunes working.
    http://www.yamipod.com/main/modules/home/
    There is a help on trouble shooting CD problems here:
    http://docs.info.apple.com/article.html?artnum=302974
    It sounds as though you want the link near the bottom on inability to use CDs.
    There is also a microsoft link on CD problems that you might find useful:
    http://support.microsoft.com/kb/314060/

  • Computer can't find DVD/CD-ROM drives after installing iTunes

    After installing iTunes, my computer no longer can detect my DVD-ROM and CD-RW drives. They've disappeared from the "My Computer" window.
    I ran "System Restore" and the disc drives showed up, but now they're undetected once again after I re-installed iTunes. I've restarted, I've uninstalled and then reinstalled iTunes, I've run the built-in diagnostic self-checks on the drives, I downloaded updated drivers, I uninstalled and reinstalled drivers, spent 1 hour on the phone with Apple support, and finally spent 2 hours on the phone with Dell Support. Nothing. Please help--I want to be able to use my iPod with Windows.
    Dell Dimension E510   Windows XP   Windos XP Media Center Edition 2005
    Dell Dimension E510   Windows XP  
    Dell Dimension E510   Windows XP  

    Hey there. May I interject? Anyone mind?
    For the most part, what's occurring is one of two things. Either...
    A) an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
    or
    B) a virus (or trojan) burrows its way into your file structure, and creates an element of itself disguised as a .SYS file. We've seen this happen before with viral elements disguising themselves as audio or video card driver files, in the efforts of masking themselves from lower-class anti-virus programs (or un-updated ones). In this case, they take on the name of a driver file that the optical drives are "familiar" with, and so, with the intention of being "fast, friendly, and efficient", the optical drives are tapped to utilize this new "driver" file... and it gets referenced in the registry as such.
    However, when your anti-virus actually snaps to it, and removes the virus / trojan, and you go off on a virus-killing mission, galavanting through the registry and cleaning the little buggers out in Safe Mode and everything... you might remove the viral elements... but... the reference to them might still remain. The device manager is still looking for that "driver file", and will cause the optical drives to lock up in a Code 39 or Code 41 because of it.
    Either way, the thing to do to reclaim your optical drives is located in your registry here:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
    You'll want to have that open, and a mini-window of the following:
    START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
    Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
    At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
    Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
    This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal
    I don't know if this will help, I think it should.
    Good Luck. Post back if you have a problem.
    Rachyl

  • "Holiday" Section in Radio Streaming Disappears after Installing iTunes 9

    Yup, as the topic suggests, after installing iTunes 9 on my Macbook 13' just recently, I realised that my favourite radio stream, 'Holiday' in iTunes has mysteriously disappeared. Is there anyone who has experienced a similar incident as I have? Does anyone know of any way for me to place this Holiday section back?
    Thanks in advance.

    Is this the station you seek?
    http://www.live365.com/stations/winterscapes
    Remember, all the stations shown in iTunes' Radio section are just feeds from other streaming audio sites. Apple does not host or create any of these feeds and the offered stations change frequently - especially as part of an iTunes upgrade. Many of the iTunes offerings are actually Live365 stations.
    If you get the station to start in iTunes from that link, that creates a 'Music' entry in your iTunes library that you can reuse. It will eventually stop working and you'll need to revisit the Live365 site to get a 'fresh' version of the station.
    If the link opens and plays through a web based player window you'll have to edit your playback preferences through the Live365.com site to use an external MP3 player which will then redirect it iTunes. Definitely more of a hassle, but it will work.

  • Awful Playback after installing iTunes 7

    I can see from the Gapless Playback forum that some are having real trouble after installing iTunes 7. I haven't had that problem (yet) but I have noticed that if I start another application, such as a game, that has sound, then the iTunes playback breaks down and the playback is wildly distorted.
    Anyone else seem this?
    Any clues Apple?

    I shamelessly stole this from another thread - maybe it'll help you.
    The Fix:
    Close iTunes 7
    Upgrade your sound card drivers (just to eliminate that as an issue)
    Upgrade to latest Microsoft direct X version:
    http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A -9B6652CD92A3&displaylang=en
    Start
    Run
    Type: dxdiag
    Click "sound 1" or similarly named tab
    Slide bar to "basic acceleration" (mine was at full, and basic is two clicks to the left)
    Exit
    Restart iTunes 7, and startup music

  • After installing itunes 10.5 itunes wont open it says i have an error , i need help so i can update my ipod , HELP!!

    after instaling itunes 10.5 i cant open itunes , my pc says its an error . . what do i do  ?

    In order to download iTunes 10.7, which requires OS X 10.6.8, you have to buy OS X 10.6. It's available from the online Apple store, in the US by calling 800-MY-APPLE, or online here.  After OS X 10.6 installation, run Software Update until there are no more updates available, at which point you'll be at OS X 10.6.8 and can install iTunes 10.7.

  • How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

    How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7.  HP computer intel Dual Core.  Thanks for any help!

    Hey idw3,
    Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Regards,
    David

  • After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes

    After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX

    Have you revieved this support document?
    TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

  • Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

    Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

    Any one or a combo may help
    Give your iPad a reset. Hold down the sleep and home  keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
    Try a different USB cord
    Try a different USB port
    Try rebooting your computer
    Try closing/opening iTunes.
    If you go through that and it doesn't work, try going into the control panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again

  • IPhone is no more visibile in My Computer after installing iTunes 8

    Hi all, after installing iTunes 8, iPhone isn't visible anymore in my Computer section in Windows. Previously, when I connected it, it was recognized as a photocamera and, from my Computer, i could access to it to see the photos that are stored on the iPhone.
    Now, instead, iPhone isn't displayed anymore: except for this, it works correctly; iTunes 8 recognizes it and synchronizes it.
    Notice: after the iTunes upgrade, when I've connected the iPhone for the first time, Windows says that he has found a new hardware and installed a new driver for an Apple Mobile Device USB.
    Has someone else experienced my problem? Thanks in advance!

    im having the exact opposite problem....my 3g is recognized inmy computer as a camera..but isnt recognized in itunes?
    i have no pics downloaded from emails (as i researched this before)
    the other night had same problem, had to restore phone, and re-install itunes..then no problem...but tonite trying to add new music and same thing again.
    disabled iphone under imaging devices, and its only listed under usb controllers...computer recognizes it every time
    there has to be a better way than restoring/reinstalling everytime?..has to be some little catch?
    HELP!
    FYI, i phone not being used as phone, being used as ipod, and only using wifi..has no sim installed.

Maybe you are looking for

  • Database can not be open!

    I want to create a sdandby database for current database. According to the processes the Data guard Concepts and Administration stated, I finished all the steps except configuring the standby redolog(I forgot this step).When I issued the command: "dt

  • Locating JavaBean

    Hi, I have writen a servlet that sends back a List of SummaryRec structure via ServletSession. What did I do wrong here? The Jsp can't locate the SummaryRec.class. <%@ page contentType="text/html;charset=ISO-8859-1" language="java" import="java.util.

  • Formatting BEx report through Macros

    Hi Experts, We have a BEx report in BW 3.5 version. We have tried all sorts of formating at BEx level but are not able match the requirement. However we are able to match the requirement through Macros. I wanted to know whether we can incorporate the

  • Procedure to create to new R/3 Adapter BO...

    Hi, We want to create new R/3 Adapter BO for CRM to exchange data with R/3. Can anyone tell me the procedure on how to achieve this. Regards, Phani.

  • Set VM parameters from an applet

    Hi all, When I run an applet I need to start the VM with this parameter: -Djava.rmi.server.hostname=localhost How can I set this parameter from an applet to correctly start the VM?!?!? Thanks in advance!!