Audio sounds like "Alvin & the Chipmunks"

I have Toshiba Satellite L445D-S5976.  I've tweaked and tried repair on the audio, but it says nothing is wrong, or can't detect problems, yet everything still sounds like High Speed sounds.
Anyone that could help, it would be greatly appreciated.

Satellite L445D-S5976
Maybe this one?
Satellite L455D-S5976
Can't hurt to reinstall the driver.
   Realtek Audio Driver for Windows 7 (32/64)
-Jerry

Similar Messages

  • Playback sounds like Alvin & the Chipmonks

    And I don't even have any of his great works in my library!!
    Everything is playing at just a little bit too fast a speed. what do I need to do? What can I change?

    Satellite L445D-S5976
    Maybe this one?
    Satellite L455D-S5976
    Can't hurt to reinstall the driver.
       Realtek Audio Driver for Windows 7 (32/64)
    -Jerry

  • When I record video on my iphone 4 the audio sounds like it is muffled and is not as loud as it should be?

    when I record video on my iphone 4 the playback of the audio sounds like it is muffled and is not as loud as it should be? I have had the phone for 2 years and the last time I had used it to record a video was in July of this year. The sound came out crisp and clear. Now when ever I play back videos the audio is muffled and at a lower volume than it should sound like. I have the volume set all the way up when I record and my hands are not covering the microphone and/or near to affect the audio playback.

    It worked!!!!! Thank you. I didn't know there was a microphone at the top. I knew the hole was there but I didn't know what it was for. Thank you so much. \m/ ROCK ON!!

  • My Webcam is not recording correctly.  When recording directly to youtube, the audio sounds like a robot.  It was not doing that when I first got my new MacBook Air last month.  What do I do to fix it?

    My built-in Webcam is not recording correctly.  When recording directly to youtube (upload), the audio sounds like a robot.  It was not doing that when I first got my new MacBook Air last month.  What do I do to fix it?
    I have tested it over several days with different internet connections...and have done it with another notebook computer on the same connection and it the video uploaded and recorded fine.  I can also use the video webcam with Google Hangouts and it records and works fine.  So I know the problem is not internet connection...and apparantly not even the webcam or mic. 

    Try using Settings > General > Reset > Reset All Settings.

  • Distort to sound like on the phone

    I need to make some of my audio sound like a voice mail recording and also like it is coming through a phone line. I created something just messing with some filters, but was wanting to use some expertise that is in this forum. Thanks for any suggestions!
    Erin

    I've played around with a few presets for this kind of thing. Honestly, it's often better to just cut off high and low frequencies to your own liking.

  • Audio sounds like a chipmunk

    Once in awhile while recording audio and a demo at the same time, the audio will speed up and sound like a chipmunk upon playback. I have been using both Windows 7 and Windows XP and both seem to have the same issue. It mostly occurs when clicking from one function of a website or clicking within a software program while demoing. Any ideas as to what the cause might be?

    Hi,
    Could you please tell the version of your Captivate? any additonal details regarding recording mode, settings, devices etc?
    Please try-
    -- to use a different external device to record again, I believe you used same device on both XP and 7 machines?
    -- record just the Audio for a few slides -- Audio -- Record to Slides/Project
    -- Do a test record for a different application as well, just to confirm, it has nothing to do with website.
    Thanks!
    Anjaneai

  • Alvin the Chipmunk

    Two things; When I payback my voice, it sounds speeded up like Alvin and the Chipmunks.    When I open Audition, my tools are greyed out.  Is it something in "Preferences" that needs to be changed?  Any help is appreciated.

    1.  Playback at the wrong speed is usually caused when there's a mis-match in sample rate between your session settings and the source audio file you're trying to use.  An analogy would be trying to play a 7.5 ips audio tape at 15 ips.  The solution is easy...either set up a session at a sample rate that matches your audio (you get the set up options when you click New/Session or (if, for example, it's only one bad track out of a whole session) then convert the track to match the rest of the session.  The command for this is under Edit/Convert Sample Typle.
    2.  Greyed out tools and options are usually just context-related.  You can't get effects if you don't have a track loaded for example--or some tools and effects can't work in real time and only "un grey" when you're in the mode for destructive editing.  Perhaps you should provide details of exactly what you're not seeing.

  • Why audio sounds different in the Mountain Lion over 10.6

    Hi
    I just upgraded my system OS 10.6.8 to the latest 10.8.4, and I found that audio on the 10.8.4 sounds different.
    I did some tests and I can say that audio when listening on the 10.8.4 has less bass content and the hi-mids are more agressive.
    I running the audio studio on my Mac Pro and this was a big dissapointment for me.
    Also I rendered audio file from Logic Pro 9 on the both system and they are the same, but when you listening on the 10.6.8 it sounds correct while on 10.8.4 sounds different. I have the same audio drivers from RME Fireface 800 on both systems. In tests I used identical Logic arrangement file on both systems.
    I just don't like the sound on the new system at all. It is worse than it was on the 10.6.8.
    I switched to the Snow Leopard again and I regret that I puchased your latest OS. Why it is done? Apple?

    This may be a topic for either of these other Apple forums to discuss: Other Pro Audio,  Logic Pro

  • IMovie 10 - audio sounds like it's underwater

    Just upgraded to iMovie 10 from 2011 version (iMovie 10 is not in the product list yet, so I'm posting here in hopes of getting some help). I like most of the new iMovie, but having a terrible time with audio after export. When I go to SHARE > TO DISK or ITUNES, the output file sounds like it's underwater or in t a tin can maybe . Hopfully it's a simple fix that I haven't stumbled on yet, but I'm wondering if anyone else is having this issue and how to fix it. The sound is correct when played in iMovie 10. Thanks, Kevin
    My CPU specs if that's helpful:
    - OSX 10.9
    - 2.8 GHz intel Core i7
    - 8 GB 1067 MHz DDR3

    I've just discovered this issue, too.  Using m4v file created using handbrake from a DV AVI file.  Audio sounds fine if video is played in VLC, but sound awful in iMovie sounding like there's a strange echo type issue.
    cheers
    Bruce

  • Satellite P775 - Recorded audio sounds like it's underwater

    Based on similar posts it sounds like a driver issue. I don't want to install the wrong driver, naturally. Thanks.

    Satellite P775-S7215
    Your downloads are here. Bookmark that page.
    Try reinstalling this driver.
       Realtek Audio Driver
    -Jerry

  • Audio sounds like broken record

    When I open the project, some audio clips will be fine for the beginning, but at some point will have one second repeated over and over again for the remainder of the clip. When played back, it sounds like a broken record. The actual files are fine, when I check the clips on my hard drive they're normal. But when I open the project, they are corrupted. And it happens to different clips each time I open the project. Even when I import the same file again, it will be corrupted in the same spot. Any ideas?

    Try updating your audio driver.

  • Import imovie audio - sounds like donald duck...

    Hello,
    I imported an imovie soundtrack that I made recently (from my camcorder). The audio track sounds high pitched, donald duck like. what am I doing wrong ?
    Also, I want to process the imovie track to remove some echo that was present in the room during recording. What is the easiest method to reduce/remove this - if possible?
    Thanks - Max
    PowerBook G4 12 inch DVI   Mac OS X (10.3.7)   iLIFE 05

    I imported an imovie soundtrack that I made recently
    (from my camcorder). The audio track sounds high
    pitched, donald duck like. what am I doing wrong ?
    The pitch and tempo issue sounds like a sample rate problem, but I thought iMovie audio was recorded at 48K which would make it play lower and slow in GB. For background on this:
    http://www.thehangtime.com/gb/gbfaq2.html#toofast
    Also, I want to process the imovie track to remove
    some echo that was present in the room during
    recording. What is the easiest method to
    reduce/remove this - if possible?
    You can play with the Gate effect to cut out software sounds, but that would only be during the silent passages.
    --HangTime [Will Compute for Food] B-|>

  • Imported audio: sounds like cartoon mice 48KHz vs. 44.1 KHz vs. .mp3

    Does anyone know if the following can be fixed:
    I inserted some new slides and imported new .mp3 audio clips into CP4.  When played slide by slide the audio sounds as I would expect.  When published, however, the audio on the new slides play at about double speed to the others.  The v/o artiste now sounds like a cartoon mouse.
    So what's different?
    I used a different recorder.  I recorded at 48KHz and rendered at the same (in Reaper), before converting to .mp3.  Yes, I know I should have used 44.1 but the file was going to be converted outside of Captivate in any case to .mp3 (and I forgot).
    In the audio Manager I can see that the 'old' files that play OK were imported as .wav. Captivate can convert these.  The .mp3 files appear as 48KHz sample rate, even though I coverted to .mp3.
    I have a feeling I may need to re-record the clips to 44.1.  Or is there are a way of converting 48KHz files to sound OK at 44.1 KHz?  Any ideas?

    Hi,
    I am not sure if yo are experiencing this issue in Adobe Captivate 5 version or older.
    If you see this issue in Captivate 5, then this issue is handled in an upgrade patch available -
    Please read more details and download the patch from here -
    http://blogs.adobe.com/captivate/2010/08/patch-for-adobe-captivate-5-to-resolve-upgrade-re lated-issues.html
    This should solve your issue if you are on Captivate 5.
    Regards,
    Mukul

  • When a game or survey opens a new window in firefox it makes annoying sounds like from the game,mario brothers.Is there a way to stop this?

    When firefox opens a new window for games or surveys,it makes annoying sounds that sound like mario brothers,Is there a way to stop this?
    == This happened ==
    Not sure how often
    == Just today as far as i know may 21st

    I have the same problem that started about an hour ago. Firefox started sounding like pac man. I uninstalled and reinstalled 3.6.3 to no avail. I guess I use IE until firefox fixes it.

  • Headphone audio sounds like it's coming out of a hole?

    Two days ago, I downloaded a radio app to my 2nd gen iPod touch. Sounded fine for a while, then suddenly faded. I could hear the music just fine, but the voices were so quiet I could barely hear them. I switched over to regular music and it did the same thing. I fiddled around with my headphones, thinking they were dying, and got it to work by pressing the jack into my ipod hard, putting pressure on it. I figured it was just old headphones and went and bought another pair.
    But it's still doing it. Brand new headphones and they only work when I put a crushing pressure onto the jack. What's going on here?

    I can't be sure, but it sounds like you have a bad contact in your headphone port. I would take it to an Apple Store to get a new one or call AppleCare to have it replaced.

Maybe you are looking for

  • MCTS Self-Paced Training Kit (Exam 70-536)

    I have been going through this book code examples and a stumble across this errorThis project come from the CD code simple sold with the book. the path= \Desktop\Code\Chapter01\Lesson2\Exercise3\Partial\CS\ViewFile\Program.cs 26 21 ViewFileusing Syst

  • CS5: error when trying to update Camera Raw 6.7

    When I try to update camera raw 6.7 I get a message "error downloading please quit and try again later.  I tried a number of times, but still get same message.  Help!!

  • G5 cd's won't play in car

    I can burn audio files fine in itunes (or any other app) on my g4 (less than 1 ghz processor)..but when I try to burn audio cd's on my g5 (using memorex printable cd-r media) it will play fine on my mac but not in the car (unless I skip over the firs

  • Invalidate Session

    Hi All, In my application user can change his/her user id. If he/she changes his/her user id, I want to invalidate user session and want logout after flashing a messages that he/she need to login again. How could I do ? Thanks in advance. Ranjan

  • How can i deposit a  XMLSchema into XDB Repository

    Hi! I've created some folders in the XML DB repository with the package: dbms_xdb.createFolder And than i read copy the XMLSCHEMA to the Folder which was been created. But how can i do this? And what is the XDB repository? And what is webDAV? Thanks