Audio starts playing about 1/2 a second after set cursor

Sorry if this was answered elsewhere as I wasn't able to find my exact problem after searching.  I'm using AA3 and Win7.  The issue is this: wherever I place the cursor on the waveform, I'll hit play & the cursor moves, but I won't hear audio until about 1/2 a second after it starts playing. So to compensate, I'm having to move the cursor further back in order to hear edits, versus being able to instantly hear audio right where I begin playback (like when I had Cool Edit).  I can offer more info if necessary.  Thanks

Some information about your soundcard and what drivers you are using would help. It sounds as if it could either be a buffer problem or that Windows has grabbed back your soundcard when Audition stopped. Make sure that in Audio Hardware Setup the box for Release ASIO Driver in Background is NOT ticked. Also a good idea to turn off Windows Sounds.

Similar Messages

  • Possible water damaged ipod shuffle, turns on and plays music, but have 3 seconds after turning it on to use buttons then they all lock up

    possible water damaged ipod shuffle, turns on and plays music, but have 3 seconds after turning it on to use buttons then they all lock up

    I think that you need to get a new one. I got mine at http://www.prizerebel.com/index.php?r=1552886

  • A slide show with audio created in PSE 9 plays fine in edit.  When brought to Premier Elements for dvd burn, the audio no longer plays.  It appears in the edit, but no audio is played.  This happens consistently.  What setting might be wrong?

    A slide show with audio created in PSE 9 plays fine in edit.  When brought to Premier Elements for dvd burn, the audio no longer plays.  It appears in the edit, but no audio is played.  This happens consistently.  What setting might be wrong?

    H-SPhoto
    That Photoshop Elements 9.0.3 Update has generally been discouraged by the Photoshop Elements gurus. But, I am not going to factor that into this at this point.
    This is what I would ask you to look at in the Elements Organizer 9 accessed from the Photoshop Elements 9 or Premiere Elements 9.
    a. Create your slideshow in the Elements Organizer 9/Create/Slideshow/Slideshow Editor. Then use the Output option of Edit with Premiere Elements.
    From your description, you are probably using the Output Option of Burn to Disc DVD which will take your slideshow directly in the Disc Menu section of Premiere Elements 9. The preferred transfer of the Elements Organizer 9 slideshow to Premiere Elements 9 Editor is by the non wmv route "Edit with Premiere Elements" not the wmv route of Burn to Disc DVD.
    Let us explore if any of the above is involved in your issue and then we will decide what next if necessary.
    Thanks.
    ATR

  • My nano starts playing a selection then turns off after one minute

    My nano starts playing a selection then turns off after one minute

    Problem solved for now.  Cleanded the jack port with a q-tip and pushed the cable in harder.  Seems to be working.  Thanks to all others who posted these past suggestions.

  • Audio start playing unexpectedly

    Hi all, this is another strange issue i encountered.
    I inserted a video in one of my courses. During the preview
    stage (and after i publish to .swf to test locally), everything
    played smoothly. But when I uploaded it to the LMS, the audio from
    the video clip started playing on the second slide for about 10
    secs then it stopped. I couldn't figured out what's wrong
    can anyone help?
    thanks
    JT

    Hi Andrew, the video is on slide 6. The audio from the video
    starts playing on slide 2 for about 10secs then stop.
    How do I set it to not preload? i can't seem to find this
    option
    thanks
    JT

  • Audio start playing unexpectedly when loaded in LMS

    Hi all, this is another strange issue i encountered.
    I inserted a video in one of my courses. During the preview
    stage (and after i publish to .swf to test locally), everything
    played smoothly. But when I uploaded it to the LMS, the audio from
    the video clip started playing on the second slide for about 10
    secs then it stopped. I couldn't figured out what's wrong
    can anyone help?
    thanks
    JT

    Hi Andrew, the video is on slide 6. The audio from the video
    starts playing on slide 2 for about 10secs then stop.
    How do I set it to not preload? i can't seem to find this
    option
    thanks
    JT

  • In the middle of a clip, the audio starts playing from another part.... Help?

    So, I'm a bit of a technological noob, so I will describe this the best I can.  I have a clip (mp4) that runs about 1 hour 30 min long.  About 30 minutes into the clip, the audio from the beginning of the clip randomly starts playing, yet the video continues as it should, just the audio randomly swapped itself somehow?
    I have not cut or edited the clip in any way, I simply imported it in, and put it on the timeline and no matter what I tried (restarting, clearing cache, reimporting, etc) nothing seems to fix the problem.  The weirder part is, if I watch the raw file using something like Windows Media Player, the clip is just fine, no problems at all.  So something must be going wrong when it's imported into Adobe Premiere.
    Has anyone had this issue or know what may be causing this? I'm at a loss and it's keeping me from continuing a series I'm working on that I need to release. 
    As I said before, I'm a bit noobish, and this is my first time posting, so please feel free to respond with any additional info you need me to supply, and try to explain things in a noob friendly way, as I may not understand super technical jargon.
    Edit: A little bit of info to help possibly... I'm using Windows 7 and Adobe Premiere Pro CS6

    Hmmm okay.  I've been using PP for 2 years now with the same type of "non-camera media" and never had a problem til now.  But since then I've edited hours and hours of similar footage with no problem, so I may  just suck it up and use something like Windows Movie Maker to edit the one clip that is messing up.  Thanks for the help, and if anyone else has other suggestions, please feel free to post them

  • The next screen's audio starts playing when the current screens audio has finished

    So I've added audio to a few screens and on the first couple it works fine. I have added a mute button and that's all, I just want the audio to play to the end then stop on each screen. It does that perfectly on the first few screens and then at a certain point, when the audio for that screen has finished, it plays the audio for the next screen, and the next, and so on even though I haven't moved on. I can't work out why it's doing this! Sure someone can explain what I've done wrong. Using Captivate 8.0.1...

    I adjusted them on one screen and it      worked - you've solved my problem again -  Thank you!
    Is there a way I can make my audio files load up like this automatically?

  • Recently my movies and videos take forever to load and when they start playing it's for a second or two at a time. Have to hit the play icon over and over, did not use to be this way they work great on my desktop and iPod

    Recently I have been experiencing my downloaded videos and online vids taking a long time to load and when they do, they will only play for a few seconds at best and you have to hit the play icon over and over. Never had this problem before with the 20 plus vids I have any suggestions would be appreciated

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Youtube videos freeze, audio keeps playing. As long as I keep moving my cursor, it play ok. What's wrong?

    This seems to happen on all Youtube video's I play. I don't know about other videos because I seldom view any others. When the video freeze happens the download bar is always ahead of the play bar so I don't think download is the problem. However, when the freeze happens, the download bar stops moving. When the play bar catches up to the download bar, the audio stops also. If I move my cursor, the video and audio start playing again. As long as I keep my cursor moving, the video plays fine. I am using Firefox 18.0.1. Computer is an HP dv6-1350us with dual processors. OS is Windows 7. I also use Chrome at times and the freeze doesn't happen on Chrome.

    hello vearlbible, maybe it's an issue with the protected mode in the flash plugin - please go trough the troubleshooting steps provided in the following help document by adobe: http://forums.adobe.com/thread/1018071
    or as an alternative you could try [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) & see if this solves the issue.

  • Orphan Menu Start Playing Timeline First Chapter

    Hi All,
    My Problem is i cant figure out where i am doing wrong.
    I have single timeline in my dvd project I import menu
    from the Encore Library did not set any action (mean the menu
    is orphan)when ever i preview from here it start playing timeline
    from the first chapter after 2 seconds.
    I tried several menues from the library but having same
    problem. when i check the project it shows error "orpahn menu"
    which is correct as i did not do any routing to any menu.
    (I am doing it with the help of Total Training Video step by step)
    Did anyone else have the similar problem.
    Thanks in advance.

    Mujeeb,
    Lets forget about Preview for a moment. Well get back to it, but not until youve done what follows. I want to make sure that I know what you have, what youve done and what you want with your DVD.
    Tell me if I am correct:
    1.) You have a DV-AVI file that you Imported (either as a Timeline, or created a Timeline from it). It was done/Imported first. This will automatically place it as Play First in the Flowchart.
    2.) You have a Menu that you Imported as Menu from either the Library or from elsewhere on your system. It has one Button. It now appears in the orphanage in the Flowchart.
    Right now, in the Flowchart Panel, you have the Disc icon (DVD Project, or whatever new name you gave it) with a black line going to the Timeline. You also have your Menu in the orphanage. Is this correct?
    You want this Menu to Play First, and then after a point in time to go automatically to your Timeline, or if the user pushes that one Button to go immediately to that Timeline. Is this correct?
    If so, hover your mouse cursor over the Disc icon. It will turn into the Pickwhip (little curleque icon). Drag this down to your Menu in the orphanage. It will replace your Timeline as Play First. There will be a little box below your Menu and it will say Button 1 (unless you changed its name). From this little box below your menu (remember, we are still in the Flowchart Panel), when you hover the mouse cursor over it, youll get the Pickwhip again. Drag it to your Timeline.
    Now, in your Flowchart, dbl-click on your Menu. Open the Properties Tab and look down to Duration (third line down). Set it to the length of time* that you want the Menu to be visible (unless the user hits the button). Uncheck Hold Forever. Loop Point should be set to None.
    Your Flowchart should now have the Disc icon with a black line to your Menu. There should be one blue line from the Menu Button 1 to the Timeline. This is what you want.
    Now, Preview the Project. I usually do this from the File>Preview on the Menu Bar at the top of the workspace. Alt-Ctrl-Spacebar will also do it. Your Preview should show the Menu, which will automatically go to the Timeline after the length of time you specified in the Properties Panel, unless you hit this Button before that time. Does this work?
    * Duration is Hours:Minutes:Seconds:Frames
    Hope I have been clear and that I am correct. If not, please tell me where I went off.
    Good luck,
    Hunt

  • ITunes just starts playing randomly.

    Hi, first time this happened.  Recently iTunes just starts playing by itself randomly even hours after I stop playing it.  Sometimes I am doing something else and sometimes the computer is just sitting there idle and it starts playing.  iTunes is always already open in the background.  This anomaly coincides with another glitch that I have been having lately, where I have a lot of trouble connecting blue tooth for my bose mini sound link II.  It eventually always does connect but sometime I have to connect and reconnect again and again sometimes for five or more minutes.
    Any thoughts?

    I think I may have fixed the problem. After trying loads of other ideas (new user account, trashing plists, etc., none of which had any effect) I disconnected all of my USB cables and hubs and reconnected just the essentials. I also unplugged and re-plugged the audio-out cable to my amp/speakers. After this I relaunched iTunes and haven't had a recurrence yet (going on 6 hours.) My fingers are figuratively crossed.

  • My apple mobile device stops a few seconds after i start it up and my ipod touch cant connect becuz of this!!?

    I have an Windows 7 desktop computer and when I try to connect my Ipod touch (4th generation ) to itunes it says apple mobile device is not started soo i go to services and start it up but a few seconds after i start it it stops i have tried everything.. reinstalling the new itunes deleting bonjour quick time everything that i found on goggle that might fix it soo and everything it said on the trouble shooting tips but it still wont work! I need help!
    Pls help me, My ipod touch is version 4.3.3 and itunes 10.4. I have tried to connect it with another pc or laptop and it works good and sync but I need it work on the main computer where all my files and stuff is at.

    When I turn on my ipod or I plug it in the apple logo appears for a few seconds and then the screen flashes white, soon after the "use itunes to restore" message appears but when I plug it in to my laptop the device isn't recognised on itunes

  • I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

    I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

    Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
    you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
    plus u may have to use double buffering techniques to make sure it starts up right away......
    thelegendaryghost

  • Itunes 10.5.2 is running so slowly - it takes over 1 second for a track to start and whenever i move to a different position in the song using seek, it takes over 1 second for the audio to start playing

    Anyone having problems with iTunes 10.5.2?
    I'm having long times to start a track and then over 1 second to start playing again whenever I skip to another part of the track.

    Refer this article to reset Winsock to it's default.  Your PCTools may have inserted LSP.
    http://support.apple.com/kb/TS4123?viewlocale=en_US
    After reset and restarting windows, you may get a prompt to remap LSP, click no.

Maybe you are looking for