Audio stays in when I make a video edit?

iMovie HD 6.03. When I make an edit- crop or split at playhead, the video is removed but the original audio stays (thus being totally out of sync). Weird? Also When I play a clip while it is still in the clips pane there is no audio?
As always, thanks to the community!

Hi
See my answer in iMovie HD 6 forum.
Yours Bengt W

Similar Messages

  • I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • When I make a video with my iPad, is it sent to the Cloud? Thanks for your help!

    When I make a video with my iPad, is it automatically sent to the Cloud? Thanks for your help!

    Welcome to the Apple Community.
    No, it's not automatically sent to iCloud.
    What do you mean by 'make a video', what are you trying to do.

  • When I make a video with the camera ipad mini seen but not heard I can do ?

    when I make a video with the camera ipad mini seen but not heard I can do ?

    Yeah, of course you can. All you do is, open PhotoBooth, record your video and then, once you have stopped the video recording just drag the movie out of the bottom of PhotoBooth onto the desktop. It is in .mov format so you can then add it to iMovie for further editing or just upload it to youTube as it is.
    Easy as pie!

  • HT201406 when i make a video then is screen show different colour and they didn't make a video good? i m using a iphone 5.

    when i make a video then is screen show different colour and they didn't make a video good? i m using a iphone 5. plz give me good advise... I buy this mobile two month ago...

    Cannot recall the full line-up of Effects in Pr 6.5, but you should have the fixed Effect>Motion>Scale, which will allow you to resize the Clip. You might need to use Motion>Position in addition. Basically, you will doing a PiP (Picture in Picture), with no Clip below, just the black showing.
    Good luck,
    Hunt

  • Can you tell me how to make my iphone 4 is heard when I make a video??

    can you tell me how to make my iphone is heard when I make a video??

    If you are expecting to hear some sort of alerting sound from the phone, the only alert is a rather quiet beep when the recording starts. There really isn't anything else.
    If you are attempting to capture sounds along with the recording, it should do so automatically, but only sounds it can pick up. Louder noises in close proximity may block out sounds from farther away.Also, make sure your fingers are not blocking the microphone port.

  • Audio is choppy when I play a video in fullscreen in itunes

    I have recently uploaded a bunch of videos to itunes in mpeg4 format. THey play fine until I make them go fullscreen. THen the audio and video gets all choppy. Any suggestions?

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • How can I get the sound to be of a better quality when I make a video on my iPhone?

    I make videos of myself playing the piano. When I play it back I find the quality of the sound on the video is not the best. I edit the video on my MacBook Pro. How can I get a better quality sound on my videos when I do them on my iPhone and edit them on my MacBook Pro?

    the iphone is not a good sound recorder so if you whannting to record your self playing you need to consider were the mic is on the phone and how fare it is a way from the piano but if i was you i would record the video and get a mic in the senter of the piano and record both of thoes and the in the mac software sycranize them both to gever to get the best.
    i am very good at recording and i am a live sound enginner so if you would like my help with it i can. up to you tho 
    i have very good knowledge in EQ and compreshon and stuff like that so i can make it sound good for ya

  • When i make a video i can not hear my self at all it sound like wind and the speaker phone they cant hear me but I can hear them do you know how to fix this apple

    Can you fix this apple let me know at [email protected]

    Hello Californiapink,
    It sounds like the ooVoo app on your iPhone is not playing audio.  I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My Photobooth freezes when i make a video!

    Hey!
    after i downloaded lion i realized that my photo booth gets stuck the first minute and then it works!
    Any suggestions beside formats

    try a reset, you won't lose any data. hold down the home/power button together until you see the apple logo and then release.  Wait for the phone to boot back up see if that helps.

  • Imported AIFF audio sounds bad when placed in sequence (HD Editing)

    I've recently switched from DV-NTSC editing to HD (set-up for HDV 1080i60 in FCP). At first I had problems getting Final Cut to capture the video, but read a thread that suggested to trash my Final Cut preferences folder. I did, and it corrected my capture problem, but now I have a new problem. When I import .aif (or AIFF however you want to call it) it sounds fine when I play it in the FCP viewer, but when I drag it into the timeline it sounds choppy, a bit slow, distorted, and it's peaking bad. I made sure my QT conversion to AIFF is 44.1 kHz 16 bit Sterio, but doesn't make any difference. I've messed with levels, the audio playback settings, and a few other things that haven't helped. I've spent hours on discussion threads, and finally gave up to ask you experts out there. I would appreciate any advice!
    PowerBook G4 Mac OS X (10.4.8) Final Cut Pro 5.0.4, QT 7.1.3

    Even at 48kHz, 16 bit Stereo...same issue. To me, Final Cut shouldn't really be that finicky with whether the AIFF is mono, sterio, or even the bit rate for that matter. The big question to me is, why didn't Final Cut care when my default setting was NTSC DVPRO, but now it cares when my default setting is HDV 1080i60? I see that my 1080i video (audio) is at 48 kHz, 16 bit sterio (which plays fine in the sequence) but the imported audio (same format) does not. I'm stumped.

  • CYMK slider color not staying put when trying to color match editable text

    Hello-
    I'm having trouble with Acropbat Pro and color matching. I tried the magnifying glass for the editable text box I created, but the color is slightly off. I used command 3 to open up the CYMK slider. I adjusted the slider to the color I do want (the CYMK color in the document made in Illustrator), hit "ok", but the color reverts to something else!!! I recheck  the text color and sure enough the CYMK slider bar changed to something a little different. Why is this????
    Ex: I click on text in the editable box, then another color option, adjust the CYMK slider to 0, 58, 28, 0 and then click ok to exit out of the color choices box. The text then changes to different color again!!! I click back on the color and somehow the CYMK slider is 3,56,28,0???? Why is this??? I'm so frustrated I can't figure out how to match this document and make it stay!!!
    Thanks!!!
    Lisa V

    Here is an example on an editable text art document:
    Baseball Party Invitation Editable Text Invitation by printmagic
    This is what I mean. I am bringing in an art document and creating a personalized name area. I am trying to match the text to a color on the document but the magnifying glass is off. And when I go into "other color" I am given a number of color picker options including a slider. I am given a CYMK slider if I click command 3 on the grayscale slider. I change the CYMK color slider to what I want but the document switches it.

  • DVD Studio Pro 4 freezing when I click on video tab in palette

    I have a recent problem with DVD Studio Pro 4. When I open the application it appears to be okay, but when I click on the video tab in the palette the application freezes. All other tabs open okay: Templates, Styles, Shapes, Audio, Stills, but when I click on video the whole thing freezes.
    This has only recently happened and I have used this software plenty in the past.
    I would appreciate if anyone could help or let me know if you need more details.
    Cheers

    I renamed the current pref file, com.apple.dvdstudiopro.plist, and restarted the application. This seems to have corrected the problem. A new version of the file was created when the application was restarted. Hopefully this will be a long lasting fix.
    Thanks very much for your help.

  • Why am I not getting the audio when I send a video from Premier Pro to encor to make a DVD?

    I created a video with only one audio track.  It plays perfectly in Premier Pro
    Then I send it to encor to make a DVD.  When I play the video in the monitor in encor, there is not sound, audio track
    What am I doing wrong.  I have done this successfully many times before

    To further add to the equation if I go to System Preferences and switch my output from my MOTU Firewire to the internal speakers of my Mac Pro I can hear the clip I just dragged and couldn't hear before in the Timeline AND when I then switch back to the MOTU I can now hear that same clip I just dragged in the Timeline.  But if I drag a new clip from Events to Timeline then I cannot hear it again until I go through this same song and dance.
    Help?
    Weird... It appears that there is a problem with the audio not being routed to the right output.
    I don't have a MOTU interface, but could it be that there is an updated driver for it?
    Also, I'd try to let OnyX run its cleaning and maintenance routines.
    If all else fails, at least you can shorten the workaround: you don't need to go to system preferences to change the output for sound. Just option-click on the volume icon in the menu bar and select the desired choice.

  • I can't get my cursor to completely leave the screen, so when I'm watching videos on some services the video control menu stays at the bottom of the screen. How do I make it disappear so I don't have to see the progress bar and stop/start buttons?

    When I watch certain video services like amazon or Netflix and enter full screen, when I move the cursor a video menu pops up on the bottom of the screen and won't disappear until the cursor goes offscreen. But my cursor won't go fully off screen. Just the tip remains visible so the video menu doesn't leave.

    What happens if you simply click the trackpad in the movie area before the cursor disappears?  Does that cause the video menu to disappear?

Maybe you are looking for