Audio stereo signal split into 3 or 4 stereo audio signals (in one single clip)?

Hi,
facing massice transcoding issues when exporting a project I had to analyse the involved video/audioclips...
and found out that for some of the video clips the audio signals have been split into even 3 or 4 complementary stereo channels.
Note: Each channel contains just a part of the original signal. This is obviously due to cutting action ...
What can I do? I have no clue!
My question:
How to get one single stereo audio signal (2 channels) out of this mess?
Thanx big time,
Oliver

Assuming we're talking about shorter takes and not a longer, spanned clip, I don't think what you want can be done in PP. Nesting will always bring the audio over as one track.
You may have to skim the clip sequence in the Program Monitor and copy/paste the portions you want to use into a second sequence for output. This will preserve the audio.

Similar Messages

Group Two Adjacent Clips Into One Single Clip?

It seems like there ought to be an easy way to do this, but I can't seem to find it.
I'd like to take two (AV) clips that are adjacent on the time line, and group/merge/copy (not sure what term to use) them together into one single clip. That so that I can then apply a single continuous movement, rotation, opacity changes, and so forth to the resulting single clip.
If any of you are familiar with The audio-editing program called Digital Performer, what I'm looking for would be the AV analogy with Performer's "Merge Soundbites" operation.
Anybody know how to do that?
Thanks folks!

Yes, nesting is the answer. select the clips you want to nest go to Sequence / Nest items / give it a name and there you'll got your nested sequence as a separate file in the browser.
What a coincidence! I just nested a series of stills in order to be able to animate their size over time.

Selected "Edit in Audition," audio track was split into two files. Preference change?[image included]

I have no idea what kind of shortcut key or preference I changed.
When I select any video on any premiere timeline to "edit in audition" i end up with the audio getting split into two wav files instead of one, as the red rectangular shows. Instead of the single audio track to edit in which you can see in the blue rectangular.
***The blue rectangular I got when I dropped a video directly into audition.
Update: did some testing around in premiere, this issue only happens with clips that are on a timeline, but if I "edit in audition" from "project" (main folder with all material), I can edit it properly.

Its one file with two different dispalys.
You can pull the bottom one down by dragging it down or hit the very little triangle on the right side.

1820m Stereo inputs split into mono inputs?

Hi,
I want to split the stereo inputs of my 1820m into mono inputs so I can record multi-tracks on Cubase. Is this possible?
Thanks in advance.

When you set up a strip in PatchMix, it is seen from inside Cubase as a stereo ASIO channel regardless of whether you use both inputs. Pan one hard to the left, the other hard to the right, and then work out your VST connections in Cubase, and route (say) the one you panned hard left to a mono Cubase channel's input, and the one you panned hard right to a second mono channel etc., then you can record each input signal onto different tracks.

Item split (into 2 lines) in billing document from one delivery (VF01)

Hi,
I need to split one item of one delivery into 2 items of billing (via VF01). Example:
- I have a delivery 80941805 that has only one line with item material XXX and quantity 1000
- I wish to create a billing document (from the delivery above) with 2 lines with the item XXX. First line with quantity 600, second line with quantity 400 (both the same material XXX). This is necessary due to different taxes in each line, one with taxes, other without taxes (different tax codes).
It´s possible via some standard function or user-exit ?
Best regards,
Leandro Mengue

Hi,
***This is under development !!! Only for tests purposes!!! ***
Actually I working on a example routine where I split the itens in two lines (each line) with the half of original quantity each one.
include LV60AB01:
ENHANCEMENT-POINT XVBUK_XVBUP_XVBFA_AUFBAUEN_01 SPOTS ES_SAPLV60A.
ENHANCEMENT 281 ZFATURAFIM.
data: wx_lips like alips occurs 0 with header line.
append lines of alips to wx_lips.
loop at wx_lips.
wx_lips-J_1BCFOP(1) = '7'.
wx_lips-sortfeld+5(1) = '1'.
modify wx_lips.
endloop.
append lines of wx_lips to alips.
loop at alips.
alips-lfimg = alips-lfimg / 2.
alips-lgmng = alips-lgmng / 2.
alips-ntgew = alips-ntgew / 2.
alips-brgew = alips-brgew / 2.
alips-volum = alips-volum / 2.
modify alips.
endloop.
ENDENHANCEMENT.
Include LV60AA22: (to be possible process the same line item two times)...
ENHANCEMENT-POINT FAKTURA_LIEFERBEZOGEN_01 SPOTS ES_SAPLV60A.
ENHANCEMENT 282 ZFATURAFIM.
   read table xvbup with key vbeln = lips-vbeln
                          posnr = lips-posnr.
   xvbup-fksta = 'A'.
   modify xvbup index sy-tabix.
ENDENHANCEMENT.
Contributions and comments will be apreciated !!!
Best regards,
Leandro Mengue

Split Stereo Channel Output into Left & Right

Is there a way to split the output of stereo channel strip (in this case, consisting of an EXS24 sampler, with some samples panned hard left) into two mono channels strips, auxes, or outputs (left and right)? For example, in Pro Tools you can select "Track > Split into Mono" to split a stereo track into two mono tracks, and control each resulting track independently. I'm talking about signal path, not splitting a saved AIFF or sound file. Is there a way to do this within Logic?

Route the output to a bus, then create two new aux channels and assign their inputs to that bus. At that point, you'll be getting the full stereo output routed to each of your two new channels. To split left and right, click-hold on the mono/stereo button at the bottom of the aux channels, and select "left" on one and "right" on the other.
That should do it!
James
[email protected]

Split audio tracks come back in as still stereo??

Zoom recorded audio track. Two interleaved tracks. One side voice, the other side guitar. The track comes in as a stereo track. I export out the track as 'split'. The exported result is two separate mono files. One file is voice, the other file is guitar. So far, so good.
I bring the two separate mono tracks BACK into Logic ... and EACH ONE is still a stereo track with the voice and guitar on left and right respectively.
I'm trying to figure out why Logic is doing this ... and what click I am missing that is causing it.
All ears,
Ben

If the Logic 'mono' files are in the same folder - when I bring them into Logic, Logic somehow turns them back into stereo (no matter which I bring in, left or right). If I take the Logic created mono files and re-export them with Quicktime 7, then they come into Logic as separate 'mono' files.
If I separate the two mono files into different folders, then bring them in one at a time, they come in as separate 'mono' files. When they are in the same folder, no such luck, they come in as two 'stereo' files, even though they SAY 'mono'.
So Logic has some kind of unusual protocol where it somehow reads a split mono file as the original unsplit stereo file (if both files come from the same folder).
Is there a way to alter this protocol??? I'm getting the 'logic' of why Logic does this.
Ben

I recently purchased an Onkyo stereo receiver with a wireless USB adapter, UWF-1, and want to stream audio from my MacBook Pro through my stereo system. The receiver tells me it is connected to my wireless LAN, but I cannot get music to play?

New to the community here, thanks for your patience. I recently purchased an Onkyo TX-8050 Network Stereo Receiver with the UWF-1 USB adapter with the intent to stream audio from my MacBook Pro to the stereo. I have gone through the setup instructions for the adapter and the receiver gives me a message saying that it is connected to the password protected network, but that is as far as I can get.
I have gone into iTunes and clicked on the "Open Stream" option, but I just get a pop up box labeled "URL" that is empty. I have Home Sharing turned on and File Sharing turned on, but I am not seeing the receiver in my Finder window or as a iTunes device.
I would appreciate any and all advice and assistance.
Thanks so much.
Dan

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

What's the best way to connect the audio out of my Mac to my stereo receiver?

I want to listen to my mp3 collection through my home theatre stero receiver.
I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
I even hear these flaws when I listen to headphones through the headphone out of my mbox.
Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
I got this one from monster thinking it should work. No dice.
So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
Why might I be getting these clipping distoritons?
any advice would be fantastic

It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
http://www.apple.com/itunes/airplay/
I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
http://www.apple.com/airportexpress/
You can even find refurbished ones on Apples website for about $79.

How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Hi guys,
Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues.... :-)
Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-) ......
Query : How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
Thanks

There are various ways to do this in Audition 3. here's one.
Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

Why does my iPhone 5 automatically launch iTunes Player when I plug it into my car stereo?

Whenever I plug my iPhone 5 into my car stereo using my Apple USB, the iTunes Player automatically launches and starts playing music from my library. I'd really like to know how to stop this from happening as it's annoying as heck! When it happens, I have to open the player, select "now playing", pause it, swipe the player closed. I'm fully updated to 7.1 also. Thank you for any help you can offer!

Surely there's a relatively easy fix for this but no Apple Rep wants to enlighten me Yet
Come on guys .. this really drives me crazy a minimum of 5 times a day.
What's the fix ?!?

I can't play my audio cd burned with iTunes on my stereo

Hi,
I've tried a few times now to burn an audio cd with songs purchased with iTunes, to play in my car or in my stereo, but even if I choose the "Audio CD" format, the cd won't play.
Am i doing anything wrong?
Thanks.

Mtlangel,
One other thing. Certain brands can also affect your burning. The brand that is supposed to be the best is Verbatim, but others on here recommend Sony, Maxell, and a few people say Memorex are good.
Here is a question I asked on different brands of DVD's and CD's awhile ago and the response I got. Just click on the link or paste in your browser if that doesn't work.
http://discussions.apple.com/thread.jspa?threadID=792378&tstart=0
I got two great link with information that will help you also.
S.

Why does my iphone think its plugged into my car stereo all the time now that i got ios5?

my phone dosnt play music or sound through the speakers when its not connected to anything, even many times when i wanna just listen to music via headphones it dosnt put sound out and acts like its plugged into my car stereo ie the volume bar goes away. why is this happening?

thrift Your security is important to us. We want to make sure that we take the necessary measures to prevent your my verizon account being comprimised. The secret question is used if your computer is not recognized. The next time you log in, look for the option 'remember this device/computer'. This way you will not be asked for the secret question as long as the computer is the same and password is correct. We hope ths helps.
Sheritah_vzw
Follow us on Twitter
@VZWSupport

Is there a way to select multiple audio tracks and make all of them stereo pair at the same time?

I selected multiple tracks, pressed "option L" but was not able to make multiple clips stereo pair at the same time.

If I remember correctly it is not possible modify a group of selected clips on the timeline with the Stereo Pair command - unless all the selected clips have exactly the same properties - such as being linked to video clips, etc. So you have to manually go through and select the dual mono tracks you want to pair individually or in smaller groups to be able to apply the Stereo Pair command.
If you select a bunch (a couple) of clips, and go to the menu Modify, you will see if Stereo Pair is grayed out or not. If it is grayed out, then you can't apply it to those clips as a group, but you probably will be able to apply it if you make smaller selections of clips.
MtD

Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

Woodwyn wrote:
is it possible to Join Two Mono Tracks to Stereo
only by exporting the two tracks
or Change the Panning of a Stereo track
you can pan a stereo track in every version of GB with the pan knob
or split a stereo track into two mono files?
indirectly:
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)
want to change the panning of a stereo track to either make it wider, or merge the two channels
that's different. no, you'd have to split the track into two mono files as described above.
even reverse L&R.
same answer

Audio stereo signal split into 3 or 4 stereo audio signals (in one single clip)?

Similar Messages

Maybe you are looking for