Audio stops playing after a few seconds when importing a HD clip

I have CS4 running on Enterprise version of Windows 7 64 bit on the following hardware:
Processor:  Intel i7-970 Hex core Gulftown
Motherboard: Asus P6X58 Premium
RAM: 24GB Kingston DDR3 1065
Video card: Nvidia Geforce9800GT
Four hard drives, system disk is stand alone and the other three are split in groups of RAID0
When I import a HD clip from file (EXCAM EX 720p60p) the audio will play in the source window or the timeline for a few seconds and then quit.  If I edit the clip in Soundbooth, from the timeline, the waveform quits at the point that the audio stopped in the timeline.
This behavior is very sporatic; sometimes it happens and sometimes it doesn't.  Closing the program and restarting sometimes solves a certain clips audio problem, sometimes it doesn't. Yesterday I worked all day without it happening but today it is happening every few clips.  Some I can fix by restarting Premiere, some I can't.
If I import the clip from Bridge to Soundbooth the audio waveform is just fine.
I have seen this problem discussed several years ago but never resolved in that discussion.  Any ideas?

Yes!  I imported the entire BPAV in a file on my scratch drive under the specific project folder.  From there I am using the media browser in CS4 to either preview the clip or import it into the project.  The audio drops out whether it is previewed or imported.  And as I have said, this behavior is not consistant.  I have yet to find a repeatable cure.
Also as I have said if I import the offending clip, from the same folder, into Soundbooth using Bridge the waveform is fine.  If I import the same clip into Soundbooth from the Premiere timeline the waveform goes flat where the audio stopped in Premiere.
Thanks for the quick replies.
I am readingthe article that was suggested soon.

Similar Messages

  • "AU audio file player" stops playing after a few seconds

    Hi there,
    i use "AU audio file player" in my concert set up.
    It worked fine til yet, but now it just stops playing after a few seconds.
    The track is 3 minutes, but it stops suddenly.
    I tried to reload the tracks and tried loading the "AU audio fle player" into a new session,
    but it still stops playing in any of the sets.
    Any idea?
    Thank you very much, S

    Hi Susanna,
    I did not find a way to trigger it from the keyboard...
    So I decided the following: I made a short cut for QuicKeys which opens the AUAudioFilePlayer and starts the loop I need. A quick solution which works with just hitting one key on the computer and the loop player starts. This works pretty well with QuicKeys but not with MS, the problem: sometimes when I choose by double clicking the AUAudioFilePlayer a black window shows up and only the name is readable, nothing else. I have to close it, reopen it and then- perhaps- the AU shows up and I can push the play button. Do you now that problem?
    R.

  • My music file did  not download correctly and stops playing after a few seconds.

    My music files did not download correctly from itunes and stop playing after a few seconds.

    Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library and then download again from your purchased history. If the problem persists, or that facility is not available in your region contact the iTunes Store support staff through the report a problem links in your account history.
    tt2

  • Burned CD is distorted and stops playing after a few seconds

    I burned a cd in the usual manner with itunes, but the cd is distorted and stops playing in the cd player. I have burned dozens of cds in the past with no problem. Is this caused by the recent update?

    Try a different brand of cd; I recently had this happen. It freaked me out at first, but after switching brands it never happened again.

  • Sound stops playing after a few seconds

    Hey all. I juz transferred a song to my iPod. The song plays for 16 seconds and then it juz automatically skips to the next song!! It's frustrating. The song played juz fine on iTunes and WMP though. Any solutions guys?

    I'm having the same problem many times over! I have about 250 songs on my IPod Nano and about 25-30 of them do this. They start to play and about 10-15 seconds into the song, they skip to the next one. A few of the songs even get almost to the end and then skip. Its VERY frustrating. I have reset, restored, and even re-formatted the IPod to no avail. It happens with songs purchased from ITunes as well as songs I've imported from CD's. The songs play just fine on the computer, just not on the IPod. If someone can help with this I would really appreciate it!!

  • Nano stops playing after a few seconds

    I tried everything and I did not do the new download. I thought it was a problem with the player, but it wasn't. I found a small piece of lint in the headphone jack. I couldn't believe it, so if any of you are having trouble with your Nano shutting down, check for lint.

    Thanks for sharing your solution!
    B-rock

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • My iPod shuffle stops playing after a few songs, then it won't start again.

    My iPod shuffle will stop playing after a few songs which is very frustrating while out walking.  I end up having to shut it off for about a minute or two and then turn it back on.  Sometimes it will start playing again, but it will start playing the same songs over again.  I can't go forward or go back.  When I try to skip a song, all I get is dead air.  I took it back to an Apple store and they replaced it free of charge; which I thought was great... that is until the new iPod started doing the exact same thing.  I've downloaded songs from the iTunes store as well as songs off of my personal CD's.  I've tried deleting all the songs and re-installing them... nothing seems to solve this problem.  I know it only costs $50; but if Apple can't get a $50 item to work; why in the world would I want to invest more money in an Apple product?  It's a good thing this was a gift.... I'm just not happy with this product and there doesn't seem to be a good explanation for this.

    I Just ran into the same issue:
    My iPod shuffle 4th gen would just stop playing, and I had to turn it off, wait 10 secs and the turn it back on.
    Then it would get stuck at the same place.
    I Even exchanged the iPod for a new one since I had just bought it.
    re-synced my playlist and same issue!
    did a restore as described above - same issue.
    Solution in my case:
    one of the songs in my playlist seems was "corrupt". Even trying to play the song in iTunes on the PC did not work, kept getting the message "This computer is not authorized ....", even though the computer is authorized.
    So somehow that song being on the shuffle crashes it.
    After I removed that song from the playlist and synced again, the problem was resolved!
    So try to play all the songs that you want to sync to your shuffle on your computer, maybe you have one song that was not downloaded properly or is otherwise corrupt.
    - Deleted the song from the local library
    - re-downloaded the song from iTunes store
    - now it was playing fine on the PC in iTunes
    - re-added it to the playlist, re-synced iPod shuffle
    all is working fine now, shuffle no longer freezes.
    hope that helps someone else....

  • I have upgraded iTunes now it stops working after a few seconds.Help?

    i have upgraded iTunes now it stops working after a few seconds.Help?

    Hi Andrew,
    If you have issues with iTunes unexpectedly quitting you may find the troubleshooting steps in this article useful -
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    If you are using Windows XP, you may want to use this article -
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • When recording a slideshow, why does audio stop recording after about 30 seconds even though slides and presentation continues?

    I'm doing everything the same and have made many successful slideshow recordings using Keynote, but since updating the Yosemite and then updating Keynote the audio just stops recording after about 30 seconds.
    The slides keep on changing and recording the video, but after 30 seconds the audio stops recording even though it seems to be registering the sound and the mic is not muted in Keynote.
    Is there some change or new setting I am not aware of that needs to be altered?
    Any advice would be helpful as I need to record a lot of presentations.
    OS X Yosemite version 10.10
    Keynote version 6.5
    MacBook Pro (Retina, 15-inch, Late 2013)
    2.6 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    Intel Iris Pro 1536 MB

    I can't imagine this will work as the the application is tied into a specific computer and user ID to prevent unauthorised use of single use applications. Copying over has not worked with previous versions of Keynote.
    It worked for me. I guess it could be because we bought our Macs together and have home sharing or something. Either way, I'm running Yosemite but with Keynote 6.2.2. and not updating again until Apple do something about this bug.

  • Audio stops playing after applying effect

    First of all, I'm a beginner, so any help is appreciated. I' ve strung a few clips together including a photo and some video. I imported a sound file to go with the clips. Everything worked fine until I applied an effect to the video clip (contrast and brightness). Now when I play back the movie, the audio stops playing soon after beginning the video clip. I've checked the volume of the audio and it's fine.... as soon as I undo the effect, it all plays fine again.
    Any suggestions?
    powerbook G4   Mac OS X (10.3.9)  

    Hi jdoo and welcome!
    Try extracting the audio from that video clip before
    adding the transition/effect.
    Thanks for your suggestion. I just discovered what the problem was. When I applied the effect I didn't notice that there was a progress bar and that it took quite a while for the effect to be totally applied. I was trying to play the movie back while processing was taking place and that interrupted the audio.
    powerbook G4 Mac OS X (10.3.9)

  • Button stops working after a few seconds

    I created a button in Adobe Captivate, which is used to jump
    to an URL. When I run the published swf, the button correctly loads
    the URL, but after a few seconds, the button does not load
    anything, even when the browser window of the URL that was loaded
    initially is closed. In other words, the button can be clicked but
    it does not do anything. This loss of functionality occurs after
    approximately 3 seconds of running the SWF.

    Hi again
    You said you have three buttons on the slide with two of them
    configured for "No action"? Why? What is their purpose if you are
    doing nothing when they are clicked?
    You also said the buttons aren't pausing. If the buttons
    aren't pausing the slide, it is probably simply playing and ending.
    Sounds like you are expecting the slide to pause, so I'm confused
    as to why you removed the pause action from the buttons.
    Cheers... Rick

  • Why does my ipod classic stop playing after a few songs?

    why does my ipod classic stop playing after just a few songs?

    is your battery charged?  How many songs do you have on the playlist (if you are playing a  playlist when it stops)?   I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

  • ITunes Match Music Stops playing after each song- Even when on Shuffle

    It doesn't matter if I'm on 3G or on WIFI the songs that are streaming through my iTunes Match account on my iPhone / iPad stop playing after a single song. Sometime it will take a few songs before it stops playing, but it ALWAYS stops. I have to constantly go onto my iOS device and press PLAY again to get the music to start again. It's not a data issue as I have a consistant 30MB down when i'm on WIFI and my 3G connection is always over 10MB down when the freezes occur.
    It's a pain in the rear having to press play every few songs as i'm paying for a service I expect to work, and clearly streaming a single song and then stopping is not working in my book.
    I'm running the latest versions of iOS and I've tried a complete system restore.
    I also notice that occasionally when a certain song comes on, it will cycle through and skip 20+30 songs extremely rapidly so I can see the song title on my iPhone but it doesn't play any of the songs inbetween. There are also of course many song's that won't even play at all.
    Any ideas?

    I am having the sames issues.  I was on the phone with Apple over the weekend.  I was told they would report it to their engineers.  It would seem this problem occurred  first in May and June and was resolved from what I have read this morning in past discussions, yet seems to be reoccurring again as of this weekend.

  • Touchscreen stops working after a few seconds on new iPad 2

    The touch screen would stop working completely a few seconds after turning on. The iPad is still running fine -- Home/Power/Volume buttons work perfectly. But not the touch screen. I can not control the iPad except turning it on/off or turning the volume up/down.
    Tried resetting the unit by holding Home and Power buttons. Still the same issue after rebooting.
    Tried restoring the iPad completely from iTunes. With a clean iOS the touch screen still doesn't work.
    Leaving the unit untouched for a few hours, then the touch screen would start working again.... for another few seconds. Then it stops working.
    This is a replacement iPad which Apple Store gave me, but I'm out of the country now and there is no Apple Store where I am. How can I get this fixed?

    1. i connect the device to usb power
    The Stor.e Wireless Adapter should be connected to mains power and the other end to the external HDD.
    Then you could use the app to access the content wirelessly.

Maybe you are looking for