Audio stops playing after applying effect

First of all, I'm a beginner, so any help is appreciated. I' ve strung a few clips together including a photo and some video. I imported a sound file to go with the clips. Everything worked fine until I applied an effect to the video clip (contrast and brightness). Now when I play back the movie, the audio stops playing soon after beginning the video clip. I've checked the volume of the audio and it's fine.... as soon as I undo the effect, it all plays fine again.
Any suggestions?
powerbook G4 Mac OS X (10.3.9)

Hi jdoo and welcome!
Try extracting the audio from that video clip before
adding the transition/effect.
Thanks for your suggestion. I just discovered what the problem was. When I applied the effect I didn't notice that there was a progress bar and that it took quite a while for the effect to be totally applied. I was trying to play the movie back while processing was taking place and that interrupted the audio.
powerbook G4 Mac OS X (10.3.9)

Similar Messages

Audio stops playing after a few seconds when importing a HD clip

I have CS4 running on Enterprise version of Windows 7 64 bit on the following hardware:
Processor: Intel i7-970 Hex core Gulftown
Motherboard: Asus P6X58 Premium
RAM: 24GB Kingston DDR3 1065
Video card: Nvidia Geforce9800GT
Four hard drives, system disk is stand alone and the other three are split in groups of RAID0
When I import a HD clip from file (EXCAM EX 720p60p) the audio will play in the source window or the timeline for a few seconds and then quit. If I edit the clip in Soundbooth, from the timeline, the waveform quits at the point that the audio stopped in the timeline.
This behavior is very sporatic; sometimes it happens and sometimes it doesn't. Closing the program and restarting sometimes solves a certain clips audio problem, sometimes it doesn't. Yesterday I worked all day without it happening but today it is happening every few clips. Some I can fix by restarting Premiere, some I can't.
If I import the clip from Bridge to Soundbooth the audio waveform is just fine.
I have seen this problem discussed several years ago but never resolved in that discussion. Any ideas?

Yes! I imported the entire BPAV in a file on my scratch drive under the specific project folder. From there I am using the media browser in CS4 to either preview the clip or import it into the project. The audio drops out whether it is previewed or imported. And as I have said, this behavior is not consistant. I have yet to find a repeatable cure.
Also as I have said if I import the offending clip, from the same folder, into Soundbooth using Bridge the waveform is fine. If I import the same clip into Soundbooth from the Premiere timeline the waveform goes flat where the audio stopped in Premiere.
Thanks for the quick replies.
I am readingthe article that was suggested soon.

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram. Can be any song, any time, same song will play if I select it again. Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

"AU audio file player" stops playing after a few seconds

Hi there,
i use "AU audio file player" in my concert set up.
It worked fine til yet, but now it just stops playing after a few seconds.
The track is 3 minutes, but it stops suddenly.
I tried to reload the tracks and tried loading the "AU audio fle player" into a new session,
but it still stops playing in any of the sets.
Any idea?
Thank you very much, S

Hi Susanna,
I did not find a way to trigger it from the keyboard...
So I decided the following: I made a short cut for QuicKeys which opens the AUAudioFilePlayer and starts the loop I need. A quick solution which works with just hitting one key on the computer and the loop player starts. This works pretty well with QuicKeys but not with MS, the problem: sometimes when I choose by double clicking the AUAudioFilePlayer a black window shows up and only the name is readable, nothing else. I have to close it, reopen it and then- perhaps- the AU shows up and I can push the play button. Do you now that problem?
R.

Stop playing after 1 minute

iPod shuffle about 2 months old. Since a view days stops playing after 55 seconds. No indication on the LEDs. If you press Pause/Play green LED blinks for 1 minute. It seems all other functions are there but no audio output. iPod is in room temperature, no moisture. Battery is fully loaded, latest iTunes installed. Just every time stops playing after 55 seconds. After switching OFF / ON you can play exactly were it interrupted for 55 seconds again.
Need help, thanks!
Windows XP

Try re downloading it from the Itunes store at no extra cost
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Audio wont play after importing from camcorder

I import video fine via the camcorder, the audio plays fine while importing but when I went to edit it, the audio track stops playing after about a mintue or two.
It shows up in the timeline, I have it checked to play, but for some reason it does not play, any ideas why this happens? I extracted a small clip of audio, and it still wont play. Any help is appreciated!

I'll double check at home the cam is there, I was messing with the settings at one point, new cam but don't think I changed any audio settings, just put it to stereo....

Movie Stopped Playing after about half an hour

Hi everyone!
I recently burnt an iDVD movie that I had made in iMovie and then played it on my DVD player. Everything was working fine and I had skipped a couple of chapters... after watching for around half an hour the video and audio stopped playing... I also tried it on another DVD player, it did the same thing but straight away. Could it have been something wrong with the burning or is it the DVD or the DVD players? The DVD I used was a TDK DVD-R.
Thanks

Hi Jia,
The media refers to your brand of discs. Try a different brand of discs. Verbatim is the most commonly recommended brand, although Sony, Panasonic and TDK have good success rates too, although sometimes even the highest recommended discs fail.
Also, don't use iDVD to burn a disc. Go to the file menu in iDVD and save it as a disc image. Then you can use Toast or the disc utility to burn the disc image at a slow speed - 1x or 2x. The slower the speed, the better the burn.

Youtube video stops playing after 11 seconds

Mac Pro / Mountain Lion 10.8.2 / Flash 11.4 - YouTube videos stop playing after 11 secs. Only just started happening last week - around time when I installed latest Lion upgrade but this may be a red herring. Tried uninstalling Flash and reinstalling with no change. Checked/emptied cache.

There are several topics with similar symptoms, but I don't think anybody has found an answer yet, as it only occurs on some few systems.
What I would try if I encountered the same problem:
try disable Hardware Acceleration (http://forums.adobe.com/thread/891337)
try update the graphics drivers (http://forums.adobe.com/thread/945765)

Hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

How can I make the iPhone podcast app automatically stop playing after one episode?

How can I make the iPhone podcast app automatically stop playing after one episode?

When playing a song, are the controls at the top of the screen there? (Genius, Shuffle, Loop?)
If not, tap the center of the page once to expose them
now keep tapping the circle on the left part of the exposed controls untill a one (1) appears...

TS1717 my music videos stop playing after 3 minutes

my music videos stop playing after 3 mins it happens to them all they worked fine before I upgraded to the new software

No there is no particular limit, especially one as short as 4 minutes in the Flash player or a Web page in general.
The video file may have been corrupted before or during upload to server.
Test the original video file on your local machine, does it play the entire length? is so, notice the file size.
Compare that size to the file size of the video on the server... if they are the same, you might want to re-upload anyway.
Your video file will also have a web address that specifies exactly where it is located on your server. Do a direct download and test the file to see if it is courrupt.
It will have an address something like this:
http://www.cidigitalmedia.com/chris_test/tombstone/video1.flv
So download your file directly from the server and play on your local machine to see if it's longer than 4 min.
Could it be that your Web host only allows certain size files (no videos over 4 min for example)?
Best wishes,
Adninjastrator

Some songs stop playing after minute 1

I recently purchased some songs from iTunes and the majority of them have this issue, they stop playing after minute 1 or 1:30.

Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
BTW the tracks that cut short, did you preview each of those for the full minute or minute 30? There's a bit of me that thinks the previews and the short downloads might be related to each other.
tt2

Smart Playlists Stop Playing After Each Track

After updating iTunes to version 10.0.1.22 my smart playlists stop playing after each track. All songs or Podcasts in my smart playlists are checked so they should be playing consecutively but they're not.
Any help would be appreciated.

Make sure the little boxes to the left of the song names are checked. If you need to check all the songs in a single view at once, hold the CTRL key and check any one of the boxes.

Need Help Getting a Flash File to stop playing after 15 seconds

I was sent 3 flash files at work, however they infinitely
look and many places require that these stop playing after 15
seconds. In addition to this, at the 15 second mark at the current
frame rate, the spot is only 85% complete. I figure I can increase
the fps but I can't get the spot to stop. The stop code is of
little use. Any help? Thank!

you can use setTimeout(yourfunction,15000) to call
yourfunction after 15000 milliseconds. in yourfunction your can use
yourMovieclip.stop().

Audio stops playing on page change

Audio stops playing on page change if horizontal sliding only is checked. But it works when it is unchecked (InDesign CC) I would like it works in both cases. Is it possible ? I know it was not possible a few months ago...
Have another question : audio controller doesn't update on page turn even if the audio file is linked to the first one. Any idea ?
Thanks for your help

Hi Alexmamba,
I can't see how you would insert the coding for this option. You'd need markers for the start and ending of any particular chapter.
Is this a book related to music? As a reader, I'm not sure I would want to listen to music the entire time I'm reading, unless there was an option to turn it off. It's like webpages that automatically play music when you visit the site. What the author of the site thinks is great music is usually distracting to the reader.
My intention is not to be rude, by the way. Just putting the comments out there for consideration.

Audio stops playing after applying effect

Similar Messages

Maybe you are looking for