Audio stops working in playing back a clip captured in Premiere Elements 9.0.1

I am capturing from a Mini DV camcorder using Premiere Elements 9.0.1 (I believe the latest update). I started this project a few days ago and was not having problems and then suddenly no sound on playback. I hear sound when capturing clips.  I am not capturing to timeline but when I go and pull up a clip to view/playback there is no sound.  I tried dragging it into timeline and just double clicking on the clip.  I can here the sound if I open in WMP.  When opened a clip today in Premeire  I had sound then next time nothing.

I have a Intel Duo Core 3.0 ghz pc with 4gb ram.  I have done many other video edits with much longer video then these clips.  These are some of my first Mini DV tapes I am converting/editing.  anyway, I can see the audio with a yellow line through it (meaning looks normal, not processing still).   When I drag the timeline cursor/bar I can hear the choppy audio segments as I drag it forward or backward.  I tried pulling up a clip in a new project and waiting several minutes before trying to listen to it, no sound.  Also, I pulled up an older project that I had worked on last and know I had no problems with the audio in that project.  Have the same exact problem.
Any ideas?

Similar Messages

  • MTS files jerky when played back in the Editor of Premiere Elements 12

    Hi ATR
    I know there is only you that helps us Adobe users with problems!!
    I have now got Photoshop 12 and premiere Elements 12 set up yey!! so now I want to start my editing
    So I go into Premiere Elements Editor and choose my files which are on my hard drive
    These are MTS files that have been taken with my Sony Cybershot DSCHX20V however when I try to play back the videos they are jerky so I am unable to edit them
    Now I know I asked this question before when I had the trial of 13 and you got it working for me but I cant find the answer
    There is no orange or green line so I am unable to render the videos
    In the project settings it says display format as 25fps Timecode
    Frame size 1920 hoizontal 1080 vertical
    Hope you can help
    Jilly

    Morning ATR
    The camera was set for AVCHD and so the videos that were taken are in the format AVCHD mts. I since changed it to mp4 format but the videos that I want ti edit are in mts format and like I mentioned they are jerky
    When I am in the organiser of Premier 12 and I can hear the playback so that is ok but its jerky as well as the editor. I've also noticed that playing back in the organizer, the playback is very pixelated?
    1. Forced Timeline Rendering
    i did exactly what you said ATR and changed the time stretch to 99% and that worked perfectly!! You're a genius!
    2. AVCHD.mts versus AVCHD.mp4
    I found an MP4 format video and added it to my timeline with the MTS files and that one play ok. The time stretch on that file is at 100% so do I have to keep changing this to 99% all the time or only when its choppy and jerky?
    Step 3 you asked me to do the below
    From an AVCHD.mts 1920 x 1080 @ 25 progressive frames per second) project, export to Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p25 and
    tell us if the playback is smooth.
    Then, from an AVCHD.mp4 1920 x 1080@ 25 progressive frames per second) project, export to Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p25.
    Then compare the smoothness of the playback of each.
    From looking at my project settings the timebase is showing 50.00 frames/second?
    You have said from a AVCHD.mts 1920 x 1080 @ 25 progressive frames per second) project? Do I need to change this now?
    Would you be able to tell me how to do a screenshot in windows 8 please? It would be so much easier but I am struggling to do it on the website itself
    Thanks ATR
    Jilly

  • How to stop the jerking of my video clips? on Premiere Element 10

    How do I stop the jerking of my video clips when I add  effetcs ..to do not zoom in or out etc..smoothly.
    Thank-you,
    Claudette

    Claudette,
    When you started your Project, from the New Project screen, you were given some choices. If you do not recall what you chose, you can go to Edit>Projects Settings>General, and see what you chose. I do not think that location has moved in PrE 10, but if it has, someone will correct me.
    Now, in very general circumstances, one should choose a Project Preset, that matches their Video Source Files 100%, or there can be issues.
    However, if one ONLY has Still Images, and there is no Video being used, things differ a bit. In that instance, one would ask themselves a question, "how will I deliver my Video, created from those Still Images?" That answer might be a DVD-Video, a BD (Blu-ray Disc), a streaming Video files on a Web site, or as a file, that one sends to others. With a Stills Only Project, one would most likely choose a Project, that matches their delivery. If there are several delivery schemes used, then I would recommend choosing the one that is the highest resolution, and handling the others with Export/Share.
    Now, within all Project Presets, there is a Frame Size, say 720 x 480 for an NTSC DV Project, designed to go to DVD-Video, or perhaps 1920 x 1080 for the production of a BD. Though PrE can Scale large Still Images to fit, it does not do the best job, and there is a major processing "hit," that can bring a computer to its knees. For those reasons, we recommend using a program, such as Photoshop, or Photoshop Elements, to do that Scaling, before one Imports the Still Images into the PrE Project. For SD (Standard Definition) DV, the "rule of thumb" is to Scale to 1000 x 750 pixels. For an HD Project, that same thinking would be 2000 x 1500 pixels. That gives one some "wiggle room." I will actually Scale to the exact pixel x pixel dimensions, unless I have a compelling reason to do otherwise - then, I will calculate the larger size, and Scale to exactly that.
    How will you deliver your Project?
    What are the specs. of the Project (using the method above)?
    What are the pixel x pixel dimensions of your images? If they are random, then concentrate on the larger ones, please.
    Good luck,
    Hunt

  • Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

    I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
    I hope someone can help me with this as I cannot work on any projects.
    thanks.

    Hi john,
    thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
    As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
    This is the info that appears on the screen
    I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
    Thanks for your help and patience.
    Arantza
    Date: Mon, 23 Apr 2012 09:12:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I have updated to 12.1. Still no sound.

    I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.

    bfun
    What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
    on the same computer when you are using a computer player independent of Premiere Elements?
    What are the properties of these clips that worked before but do not know with regard to sound
    For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
    Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
    Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
    Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
    We will be watching for your follow up.
    ATR

  • Audio stopped working on my S20

    Hello,
    I purchased a Slidebook last fall, and suddenly my audio stopped working. Yesterday, I was getting serious clipping when i played audio though my headphones. The internal speaker wouldn't work at all.
    Today, neither headphones nor speaker work. I should mention that I'm running Ubuntu, but this has never been a problem before yesterday. Does this sound like a hardware issue? Has anyone else had this problem?
    Thanks for your help.

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • My mac books audio stopped working, how can i fix it? New to Mac.

    My mac books audio stopped working, how can i fix it? New to Mac.

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:   "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Make sure that no box is checked under “Mute”.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".
    7.Launch iTunes and play a song through headphone and adjust the volume

  • Audio stops working right after login

    Hi everyone, I have a macbook pro 13inch mid 2009 running mac osx 10.7 lion. Few weeks ago the audio stopped working but after few moments and 2 reboots it started to work fine again. Now are 2 days that the problem came back. I tried to reboot multiple times, to reset the nvram and pram, to use headphones (they dont work either) and to kill the process coreaudiod. Still nothing! I know that it is not a hardware problem since the sounds stops working just right after I login (the sound at the start works and on the login screen the audio controllers still emit the sound), the only sound that seems work after the login is the sound of the trash folder when I empty it (weird isnt it?). I know that a osx reinstallation would probably solve the problem but I dont have time for that right now and I dont want to risk to lose some file. Does any of you have any solution?

    System Preferenes > Sound > Output > Internal Speakers
    Make sure that Mute is not enabled.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Best.

  • Audio stopped working on HTC Touch Pro 2

    I have an HTC Touch Pro 2 running Windows Mobile 6.5 on Verizon.  Recently, the audio stopped working -- both for the telephone and the MP3 components of the device.  I can't hear people when they speak to me over the phone and they can't hear me.  Playback audio for the MP3 player doesn't work with either head phones or speaker.  If I do a hard re-set, the audio returns, but eventually disappears.  When the audio isn't working, the icon for headphones displays -- as though I have headphones plugged in even when I don't.  The icon stops falsely displaying when I manage to restore the audio.
    Does anyone have any idea what the problem is?

    Hello RJLweb,
    I appreciate you providing us with such details. Have you tried to plug phone headphones into the device & do a battery pull? In most cases, this will help the device determine when the headphone is plugged in or not. Also, please verify that the bluetooth is turned off on the device, just in case the device is trying to auto-pair. If these two options doesn't work, then a factory reset would be the next plan of action. Hopefully you have all your information backed up before performing this step. Once you have tried these steps, please respond with your results for additional troubleshooting, if necessary.
    Hope this helps...

  • Beat Audio Stopped Working - HP Pavilion DV7 Notebook PC

    My audio stopped working and none of the recommended fixes seems to be working on my laptop.
    Any other ideas? Is this because of a driver update issue or ? I would like to keep my beats audio, but if not, doesn't seem like I can even get back to a default sound.
    Any advice or help is appreciated. I, like everyone else, uses thsi for watching DVDs, music, You Tube etc. Not to mention can't use for Skype calls anymore either. I know PCs don't last forever, but this is only 3 years old.
    Thanks in advance!

    Hi,
    Please try the following package (Windows 7):
         ftp://ftp.hp.com/pub/softpaq/sp57501-58000/sp57966.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion dv6 audio stops working upon inserting headphone

    I have a HP Pavilion dv6 Notebook PC with Windows 7 64-bit Service Pack 1 installed. Almost every time that I insert a headphone into either of the two headphone jacks the audio stops functioning and this issue continues even after I remove the headphone from the headphone jack. As a result when I want to play an audio on my laptop I get an error that there is a problem with the driver/sound device. I have the latest IDT High Definition Audio Codec driver installed, i.e. sp59542 ver. 6.10.6381.0. Occasionaly, disabling and enabling, or uninstalling and reinstalling the audio driver would resolve the issue but the problem would happen again upon connecting a headphone to my laptop. I have used two different headphones (differen brands) and the problem continues. From the searches I have done this seems to be a hardware issue and something related to the on/off switch in the headphone jack so I was wondering if HP is aware of this and whether any recall has been made. It looks like there are different symptoms associated with this hardware issue. Any help with fixing this problem would be greatly appreciated.

    Hi HP-User22,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv6 and audio stops working when inserting headphone. Here is a link to update the BIOS.
    I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
    Have you tried to run a hardware test? Here is a link to do a hardware test. This will test all hardware functions.
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • IPod audio stops working after a few minutes of watching a video Mp4.

    When watching full length movies on the iPod, my audio stops working at random. The only way to get it back is to stop the movie and advance it, then start it again.

    What video conversion software did you use? And did
    you install the latest IPOD updater?
    I read more of the discussions and going back to the old version took care of the problem.
    Thanks!

  • New ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

    new ipod nano stopped working while playing will not even turn tried to charge it still nothing HELP!!!

    Change the rice and dry for another couple of days. Then:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 if 64 GB one and $99 for the other 4Gs.. They do not fix yours.
    Apple - iPod Repair price              

  • Audio stopped working (Macbook Pro)

    The audio stopped working/I cannot adjust it at all. I googled and I've done a PRAM reset, I have no red light coming from the jack, and when I go to 'sound' via preferences it tells me that there are no output or input devices found. Help would be greatly appreciated!

    soyoungsoinsane wrote:
    I go to 'sound' via preferences it tells me that there are no output or input devices found.
    You have to take the MBP to the Apple store to have it checked out.
    If the computer is in warranty, it will be fixed free of charge.
    Sometimes resetting SMC resolves the issue.
    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • My audio stopped working suddenly (both w/ and w/o headphones) and a bluetooth error message keeps popping up?

    Abruptly today my audio stopped working and when I plug my headphones it doesn't work either. A popup comes up saying something like "A Bluetooth Error Occurred, we are having trouble connecting to your audio device blah blah blah" then the only button to press is "Stop using headset", so I click that and nothing happens. When I open the bluetooth thing on system preferences the only device is a speaker that is across the country from me and is not connected.
    Can someone pleaseeeeee help me?
    Finals are enough of a problem.

    About two months ago I had a problem where no sound came out of any left headphones (headphones where fine) and this lasted about a week. I was going to have it checked, but then it started working and been ok since. Maybe giving it time will fix it by itself, or maybe it's a more serious problem and needs to be checked out. Hard to tell. It's best to get it checked out if this problem continues but first try restarting the computer. Goodluck on finals, I got em too.

Maybe you are looking for