Audio streams un-muted when new participant enters room...

Hi - I have noticed that in a hosted room (ie. knocking queue enabled) that when a new participant is accepted to enter the room all existing audio streams that I have muted are automatically un-muted and I have to explicitly re-mute them from the owner's view. Is this the intended behavior and is there a way to prevent this from happening?
Thanks

Hi ,
Yes you were right. There was a nasty bug on our side, I ran the test cases today. Thanks for pointing it out to us. I have fixed it and it should be fine with the next drop of SDK.
If you are using player 9 source to link your application, then I can give you the fix and you can put it in your source. Otherwise, please wait till next drop and till then you can explicitly mute them.
Thanks again for bringing such issues. It helps us in smoothening our SDK.
Regards
Hironmay Basu

Similar Messages

Audio stream gets reset when it shouldn't

Hello
I've got 1 asset with 4 audio streams and 5 subtitle streams and according to the language choice made on the first page of the menu, the correct audio streams and subtitle streams get set. There are 10 different documentary DVDs, of these 5 are doing what they should and 5 not - the fifth language choice, Swahili, somehow resets to the first audio stream (english or original language) even though the correct subtitle stream still comes up. This when simulating and when burning the disc. When we check the info panel while simulating to see what values get passed thru the specific GPRMs, the correct values are there but as soon as one clicks on the Play button, you can see the value being incorrectly set back to the "english" audio stream. We've double checked all our settings, compared to the projects that work correctly, checked over and over to see why this could happen and there is no difference between the ones that work and the ones that don't...
Any ideas on why this might be so?
Corné

Hello
No, that was not it but I did manage to resolve the problem after literally checking every single line in every script and physically what is where. And we found that DSP does not like it if there are gaps between audio tracks. For example, one needs to stack audio tracks up beneath each other, as soon as there is one track on track 1 and then one on track 3, the audio will reset back to track 1 when clicking on a button that is set to track 3. Because we have so many languages but not all films had all the audio tracks, we wanted to keep a basic structure all the way thru so our scripts would be easy to change, therefore sometimes having empty tracks between others, but clearly this does not work.
Corné

Bluetooth Audio Streaming Bug on the new MBP with Retina Display?

Hi,
today i got my new MacBook Pro with Retina Display. I am using Monsters Clarity HD Model One as speakers for my computer and have the new Bluetooth-Module called "Streamcast". This Module is APT-X and AAC compatible and has a really great quality. Normally...
But with the new MBP i can only stream the Audio via SBT (AD2P) what is a much worse quality. On my old MacBook Pro 13" AAC and APT-X was working very well.
Is that already a known issue? What can i do in this case?
Thanks a lot,
Rene

so return it for another one if its within the 14 day return policy. If not, bring it in for repair.

Stream7 - bluetooth audio streaming goes off when i turn the display off!

I have a hp stream 7 that is connected via bluetooth to my loudspeakers.
Everything is fine until the display turns off or i press the power butten to turn off the display.
When i turn on the display(press power button) the sound starts and play normally.
I can't find any option to turn off this behaviour in w8.1. Can you help?

The microsoft music player that is on the tiles metro section of windows supports music playback when the connected standby is activated. Unfortunatly if you are looking to go any further than this you will need to change over all your power control settings to that of a laptop.
I instructed another user of it in this post here, http://h30434.www3.hp.com/t5/Windows-Tablets/Stream-7-Can-t-Turn-off-screen-without-putting-tablet-i...

Audio stream stops when I switch to another tab in Safari

I've got this radio station website which links to a live stream so you can hear the station online. It worked fine a couple of weeks ago, on my Powerbook G4 running 10.4.9. Then my Powerbook died.
Enter my new MacBook Pro, still running 10.4.9. I try to listen to the same station, but everytime I start the stream, then switch to another tab to browse the internet, the audio stream stops.
BTW, the audio stream behaves properly when I use Firefox. Is there a reason why Safari can't keep on playing the audio stream when it's not in the active tab? Or have I got a bad configuration?
Many thanks, as always.

Nah, forget it; I just remembered what really used to happen (which still happens):
I used to open a new Safari window (not a new tab), open the radio stream in that new window, then switch to my previous Safari window with all my tabs. Then it works.
For some reason, I don't have to do this (i.e. open two different windows as opposed to two tabs) in Firefox.
I really like and prefer Safari to most browsers, but I have to admit, it's rather flaky in a number of ways. This is one of them.

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

When new record instance trigger at Fire Enter Query event is throwing erro

HI
I have the following code on when new record instance which is set to fire at Enter Query Mode
IF :SYSTEM.BLOCK_STATUS <> 'QUERY' THEN
rec_num:=Get_Block_Property( 'MASTER', CURRENT_RECORD);
GO_ITEM('DETAIL.ITEM_NAME');
CLEAR_BLOCK(NO_VALIDATE);
GO_BLOCK('MASTER');
GO_RECORD(rec_num);
END IF;
But this is throwing error when I am querying record on master block.
It says 'Function not allowed.Please see a list of keys or functions'
Thanks in advance.

hi,
GO_ITEM( ) procedure is resctricted procedure.It can not be used in Enter Query mode to navigate to an item in a different block.
You can check wheter rest of the procedures are Enter Query Mode -Yes/No thourgh forms help window.
Message was edited by:
Manish.Sharma

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Does my new XBR65X900C support 5.1 audio streaming with Netflix?

Hello, Does the XBR65X900C support 5.1 audio streaming via the optical output or ARC via Netflix or Amazon in 4K? I've tried connections to my receiver via ARC and also via optical, and the TV: - In Netflix never shows "5.1" as an option- Only outputs two channel in Amazon On the receiver I've tried two of the three audio options:- "Auto 1" setting, which outputs compressed audio with no changes- "PCM" setting I didn't select "Auto 2" at first which seems to be the same, but sends compressed, multi-channel audio with no changes but I'm assuming it would have no effect given the wording implies it simply sends two channel audio compressed without encoding. I did subsequently try the "Auto 2" setting, but it had no impact on the issue. I did try the same receiver (Onkyo TX-NR1030) with an LG TV and it receives a 5.1 source from the same Amazon account. The manual suggests the TV does in fact support streaming audio in 5.1, but I cannot seem to activate this on the TV. Please advise,Matt

I have just bought the KD55X8500C on Saturday, only to find that the TV doesn't have 5.1 for Netflix. I am yet to try google play movies, but from what I am seeing, I'm not holding my breath. It's 2015 SONY!! How can a $3k TV be sold that can't do 5.1 sound on streaming services, and no where on your site or in merchandising material to you highlight that this is a limitation of the TV. I want a Sony rep to tell IF this going to be fixed, WHEN it is going to fixed, or if not, where do I get approval to return my TV for a full refund so I can go buy a SAMSUNG that I know can do this. Again wont hold my breath - in Australia the tech support phone line is only available from 8am to 6pm on weekdays!! So only unemployed people can get support!

Airplay audio streaming from Iphone to ATV crashes when changing randomly title?

Why does airplay audio streaming from Iphone 4S iOS 7.04 crashes when changing randomly title? The ATV is not connected to a TV, only to an AV Receiver. Anywhere the same problem?
Thx a lot
Nolame

Oops - I messed up the title-
This is with iOS 7.0.2 and Apple TV 6.0.

Why doesn't it begin a new paragraph when I press "enter?"

Supposedly, when in paragraph mode, you can begin a new paragraph by pressing "Enter" in Windows. But, when I press "enter" it commits and takes me out of paragraph editing mode. This is very frustrating. What is the remedy?

I only experience the problem when I'm trying to do paragraph text in Adobe CS4. I have a Lenovo laptop that has 2 enter buttons: one with the number keys and the second with the alphabet keys. For whatever reason, both enter keys "commit" the text when pressed. I did find out that if I press the FN key with the Enter Key, then it takes me to the next paragraph. But, that is a little "weird" since regular paragraph text doesn't work like that. Can this be changed in my settings?
Thanks,
Becki Miller

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

I'm trying to set up my new iPhone 5s from a backup of my previous iPhone, when trying to enter my Facebook login info in settings I keep getting the following error message : error signing in could not communicate with server, please help !

Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook.

Is there a way? When I type something in the search engine feature, is there a way that when I press enter to search, it comes up in a new tab, rather on the page I am using?

When I type something in the search engine feature, is there a way that when I press enter to search, it comes up in a new tab, rather on the page I am using?

Yes, and I presume you mean both the search engine results, and the pages opened from the results.
Without making any changes you could always use '''Alt+Enter''' once you typed something into the search bar, or the location bar so that it would appear in a new tab. From the search results page you could always use "'''Ctrl+click'''" or "'''Ctrl+Shift+click'''" to open link n a new tab
* Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://dmcritchie.mvps.org/firefox/keyboard.htm
* Keyboard shortcuts | How to | Firefox Help<br>https://support.mozilla.com/kb/Keyboard%20shortcuts
The configuration entries of interest:
* '''browser.search.openintab''' user set boolean '''true'''
* '''browser.tabs.openinnewtab''' user set boolean '''true'''
Documentation
* http://dmcritchie.mvps.org/firefox/tabs_config.htm
* http://kb.mozillazine.org/About:config_entries (I use keyword shortcut of :"aboutconfig:" )
* http://dmcritchie.mvps.org/firefox/tabs.htm
Google settings:
* [x] Open search results in a new browser window.
:By default Google opens links in its search results to the same new tab, but I believe that the configuration changes supplied also fix that because I no longer have to use the keyboard shortcuts to override.
Tools ("Alt+T") > Options > Tabs
* [x] Open new windows in a new tab instead

My audio streams through my Apple TV keep going on and off. This is new. How do I fix it?

My audio streams on Apple TV keep going off and on. Sometimes they stay off. This is new. How do I fix it?

Hi, geoff1949.
I found a couple of resources to help troubleshoot the issue you are experiencing.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/ts3623
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Cheers,
Jason H.

Audio streams un-muted when new participant enters room...

Similar Messages

Maybe you are looking for