Audio stuttering in generated MP4 file from Captivate 6
I'm using Captivate 6.0.1.240 on a Windows 7 machine. I opened a project that I created in Captivate 5.5 and published the project to an MP4 file. This project is straightforward: I captured video, imported audio into the captured file, and then edited the file so the video and audio match up.
The problem is that I get audio stuttering in the generated MP4 file. This problem doesn't occur when I preview the file within Captivate or when I generate an SWF file. I've implemented the potential solutions in this forum but so far nothing has worked. Since I'm viewing the MP4 file on my hard drive, bandwidth isn't an issue, either.
My project is for an online course for RoboHelp, so I would prefer to use Adobe technologies to create the course. However, I can't do that if Captivate won't generate working MP4 files. I would be happy to share the output file so you can see what's happening. If you need any other information to solve this problem, please let me know.
Hi, Anjaneai. The size of the generated MP4 file using the default settings is 115MB. However, as I said in my original message, I'm generating this file on my own hard drive so there aren't any bandwidth issues. I have noticed that the time it takes to generate the MP4 file takes significantly longer than the time Captivate originally estimates. For example, Captivate says the project file will take a little over 3 minutes to convert, but the actual time was a little less than one hour. I'm not sure if that's due to the fact that I was running Firefox and the associated Flash plugin at the same time.
The audio is a separate object on the timeline. I simply added the audio within the Properties tab.
I'm not sure what smaller resolution I should try. Please send a suggested setting (perhaps the lowest one?) and I'll regenerate it to see if that works.
Thanks,
Eric Butow
Similar Messages
-
I realize the camcorder is just available now but I assume the MP4 files are the same as in the R300 from last year. I just want to be sure that imovie 11 will be able to import andedit the MP4 files from the canon Vixia before I purchase the camera.I understand that imovie has trouble with some MP4 files and works fine with other ones. I don't want to transcode into another format and generate gigantic files of data. I also understand that the videos with AVCHD has better video but I prefer a easier workflow. I imagine one day Apple in it's infinate wisdom will eventually support AVCHD.
jerry kaplan wrote:
… I would love to see an article explaining these real world differences and suggestions on which to use. …
two options:
• not exhausting - go to
http://help.apple.com/imovie/cameras/en/index.html
these devices are tested by Apple 'bout functioning with iM
choose one = works. guaranteed.
• exhausting - learn about codecs, containers, bitrates .....
in short: AVCHD is a standard, details e.g. here at wiki
standard means: some settings are conform, some not. example: no 120fps in AVCHD.
note: there's vers1 and there's a new vers.2 .......
mp4 - just a container, or 'wrapper'.
means: like a box of chocolate, you could never know what's inside. example: 120fps in mp4.
but ........
AVCHD nor mp4 are 'codecs'.
here comes h.264 - could be in a AVCHD/mts, could be in a mp4.
iMovie: respects standards.
does NOT import non-standards-conform files/videos/datas.
encode a 1080video as 30p/h264 = would 'fit' into AVCHD
encode a 1080video as 60p/h264 = would 'fit' into AVCHD2 (=not supported by iM11), would 'fit' into mp4 (= iM11 supported) ...
mp4 is more ... 'open minded', more general; lacks therefor stuff like gps location data and other meta-tags.
the next iM13 should support AVCHD2, it's bigger brother FCPX does .....
last word:
iMovie is NO general 'cuts all movin' pictures'-app!
it is meant for consumer convenience with consumer devices.
=> supports the most 'popular' standards. not anything. -
Generate pdf file from 9i reports and save it in C:\oracle_reports\
i want to generate a file from oracle reports in PDF format and want to save it on already defined path.
c:\oracle_reports\
right now pdf generation of report is working fine but before generation of pdf report system prompt me or open a dialogue box to save my pdf file on drive. i dont want to see these dialogue box or prompt me to explicitly save it.
i want all the work done automatically.
regards
------------ source code--------------
PROCEDURE PRINT_PROC IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
pl_id ParamList;
report_path varchar2(100);
aud_sno varchar2(1000);
aud_type varchar2(500);
BEGIN
pl_id := Get_Parameter_List('report_data');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('report_data');
User parameters : Customize these to fit your report
report_path := :GLOBAL.Web_BASE_PATH||:GLOBAL.PATH_SCM||'REPORT\scm_rfq.rep';
-- Initialize your report parameters here
Add_Parameter(pl_id, 'p_cmp_code' , TEXT_PARAMETER, :global.company_code);
Add_Parameter(pl_id, 'p_rfq_sno' , TEXT_PARAMETER, :document_sno);
Add_Parameter(pl_id, 'P_PATH' , TEXT_PARAMETER, REPORT_PATH);
Standard parameters: Don't change
Add_Parameter(pl_id, 'PARAMFORM' , TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id, 'PAGESTREAM' , TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id, 'MAXIMIZE' , TEXT_PARAMETER, 'YES');
-- end standard parameters
repid := find_report_object('REPORT_OBJ');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_oas');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,report_path);
-- SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\ORCLSRV\UTL_MAIL\'||:doc_type||:receiver_sno||'.pdf');
v_rep := RUN_REPORT_OBJECT(repid,pl_id);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
END;If you use rwclient you could that easily, from a Form, it requires additional steps.
Look at this thread Re: save report -
Error while Generating WSDL File from SAP WSDLGenerator
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at WebServiceDescription.SelectOperation.ShowUDOsList(String sessionID)
at WebServiceDescription.SelectOperation..ctor(String sessionID)
at WebServiceDescription.WsdlServicesGenerator.ShowOptions()
at WebServiceDescription.Form1.btCreateWsdl_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
WsdlServicesGenerator
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Services/WsdlServicesGenerator/WsdlServicesGenerator.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Web.Services
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
axh7tjvl
Assembly Version: 1.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
o_2nbqv_
Assembly Version: 1.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I am facing problem While Generating WSDL File from WSDL Geerator which is provided by SAP Business One
If any body has resolved this. Please help Me...!
Thanks
MritunjayHi.
We've seen that error too few times.
We downloaded the sourcecode for the wdsl generator and discovered,
that in our case, it was because we had no user defined objects.
Its actually a bug as far as I can see, where the wdsl generator tries
to enumerate a empty recordset, and crashes.
Regards
Jørgen T. -
Error while Generating PDF file from Datagridview .
Hi every one,
I'm trying to generate pdf file from datagridview,while executing my code getting nullvalue exception..
Here is my code:
private void btnexportPDF_Click(object sender, EventArgs e)
//Creating iTextSharp Table from the DataTable data
PdfPTable pdfTable = new PdfPTable(dataGridView1.ColumnCount);
pdfTable.DefaultCell.Padding = 3;
pdfTable.WidthPercentage = 30;
pdfTable.HorizontalAlignment = Element.ALIGN_LEFT;
pdfTable.DefaultCell.BorderWidth = 1;
//Adding Header row
foreach (DataGridViewColumn column in dataGridView1.Columns)
PdfPCell cell = new PdfPCell(new Phrase(column.HeaderText));
cell.BackgroundColor = new iTextSharp.text.BaseColor(240, 240, 240);
pdfTable.AddCell(cell);
//Adding DataRow
foreach (DataGridViewRow row in dataGridView1.Rows)
foreach (DataGridViewCell cell in row.Cells)
pdfTable.AddCell(cell.Value.ToString());//nullvalue exception
//Exporting to PDF
string folderPath = "C:\\PDFs\\";
if (!Directory.Exists(folderPath))
Directory.CreateDirectory(folderPath);
using (FileStream stream = new FileStream(folderPath + "DataGridViewExport.pdf", FileMode.Create))
Document pdfDoc = new Document(PageSize.A2, 10f, 10f, 10f, 0f);
PdfWriter.GetInstance(pdfDoc, stream);
pdfDoc.Open();
pdfDoc.Add(pdfTable);
pdfDoc.Close();
stream.Close();
Thanks & Regards RAJENDRAN MHi Rajendran,
The second question is about the usage of iTextSharp library, which is not a MS product, please post in their forum for help:
http://support.itextpdf.com/forum
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Generating XML file from WORD file
hello
Everyboby.
I am trying to generate xml file from a word file.
but i am stucked with how to do it? any kind of help will be useful.
i think for doing this work i have to develop XSD file, because when i am creating the xml file, the hidden space within the word file is not catched.
please help me out.
waiting for reply
thanks
milindhello
after searching on the net i came to know that org.apache.poi.hwpf.* is used for reading word file and its contents. for converting it to xml i have to use org.exolab.castor.xml.*
now my problem is that POI is in its early beta version and there is no help or any sample examples for understanding the api.
so if you have any idea regarding it, please write to me.
waiting for your reply.
thanks
Milind -
How to generate XML file from a table without using UTL_FILE that too in local machine...
You downloaded the wrong XML Parser!
XSQL requires Java Parser. Well, there's a copy included with the XSQL package so you actually don't need to do another download.
You really don't need XSQL if you just want a XML file from DB, you just needed a XML SQL Utility. Download that and run the samples. -
Playing an mp4 file from my iPad on to a TV screen.
I am playing an mp4 file from my ipad 2 on to a TV screen. I would like to see the video on both the TV screen and my ipad. Currently the video can only be seen on the TV screen.
I am using an HDMI cable with an adapter to connect the ipad to the TV screen.
Thanks
DaveOK, I can get the video to play, but I have no ability to scroll thru the movie.
-
Can you insert mp4 files in Captivate 5?
Folks
I really need to use mp4 files in captivate 5 as the quality of these surpasses flv files. We do not have licences for Captivate 6 so can't use that. Any advice would help tremendously.
Roz FaulknerHello Roz,
Only way is to convert them as FLV and use them. Can you convert them to FLV using Adobe Media Encoder? That usually retains the quality, there are many presets as well that you can use.
Thanks,
Vish -
Hi I need this asap... "Java code to generate XML File from XML Schema"
Hi all....
I need this asap... "Java code to generate XML File from XML Schema i.e XML Schema Definition, XSD file".
Thankz in advance...
PS: I already posted in the afternoon... this is the second posting.take look at :
http://sourceforge.net/projects/jaxme/
this might help... -
Java code to generate XML File from XML Schema
Hi I need this asap... "Java code to generate XML File from XML Schema i.e XML Schema Definition, XSD file".
Thankz in advance...JAXB has been available as an early release download for some time. There are also XML Binding packages available from Borland (JBuilder) and Castor. These tools create Java classes from a source document, xml,dtd etc. You can use these classes to marshal-unmarshal XML documents.
Dave -
Generated pdf file from oracle reports show bad characters
Hello all,
Iam fighting with a problem with generated pdf file from oracle reports which show some bad characters. I was searching for some information but it didnt help...
I have Oracle Database 11g R2 (or 10g R2) on Oracle Linux or Windows, Oracle forms and reports 6i (i know that is very old and not supported with 11gr2 but we are in this scenario).
NLS parameters are set like this
server:
NLS_CHARACTERSET EE8MSWIN1250
NLS_TERRITORY AMERICA
NLS_LANGUAGE AMERICAN
client:
NLS_CHARACTERSET EE8MSWIN1250
NLS_TERRITORY SLOVAK
NLS_LANGUAGE SLOVAKIA
When I run Oracle Reports it show perfect in display and when I try to print them, they are all good with good characters, but when I try to generate pdf file, some characters like č,š,ľ are not displaying corectly... This happen only when try to generate to pdf...
I try to work with uifont.ali on client side but without any result. Fonts for reports were installed on client and server side... Can someone help me with this problem? Thank you very much for every advice.
MartinHi Sergiusz,
Thank you for your reply. I look at what you wrote and try to make some test...
1) For first I download FontForge, which can generate type1 font from true type. So I open FontForge and open my Arial.ttf font and use "Generate Fonts" to save my Arial.ttf font to pfb and pfm (whoch are need to set in uifont.ali). I have to change encoding, because my font has 2byte encoding so I reecondode the font from ISO10646-1 to ISO8859-2 and generate to pfb.
2) Then I navigate REPORTS_PATH from regedit to my *.pfm and *.pfb files.
3) I add these lines to end of my uifont.ali
[ PDF:Embed ]
Arial = "Arial.pfm Arial.pfb"
ArialNarrow = "ArialNarrow.pfm ArialNarrow.pfb"
4) Then I generate my report but nothing change... I check "Font used" in my pdf file, but there were not my fonts embedded I guess..
I also try PDF:Subset, but it doesnt change anything... I try PDF aliasing to see if my uifont is working - this work very well, but I dont need to change font...
Any other advice? Thank you so much to everyone!
Martin -
Generating delimited file from a report in reports 6i gives error rep-1814
Hi all,
We are using reports 6i.
We have a report from which we are trying to generate a delimited file.
We are encounterign the error REP-1814 The object vertically can never fit.
After looking into forums we came to know that there is something like DELIMITED_HDR should be set to NO..
Also we observe dthat this is done using th following command
set_report_object_property('exp039r', null,
' DELIMITER=tab' ||
'DELIMITED_HDR=no');
We tried doing that but, it is not working. Is there anything we should do to get it work.
Thanks and Regards,
HimaSee in Forms Forum
generating delimited file from a report in reports 6i gives error rep-1814 -
Settings when using mp4 files from Samsung GS3
Hi,
Does anyone know the settings I should select when creating a New PE10 Project and using mp4 files from a Samsung Galaxy S3 mobile phone?
ThanksMs Spielberg
If you are using video files from the Samsung Galaxy S3, from what I have read, it offers 1080p up to 30, that being 1920 x 1080 @ 30 progressive frames per second. Is that correct? If so, please consider.
The project preset should match the properties of your source media. In setting the Premiere Elements 10 Windows project preset (new project dialog), the choice of one of the FIip project presets range from frames sizes 640 x 480 to 1280 x 720. So, they would not be a match.
Consequently, I would ask you to consider the project preset if your source media from this Samsung Galaxy S3 are as I have read 1080p30.
NTSC (or PAL as the case may be)
DSLR
1080p
DSLR 1080p30 or DSLR 1080p30 @ 29.97
In Premiere Elements 10 after you set the project preset, then you import your media with Get Media.
a. If you can connect your phone to the computer, you could explore Get Media/Flip/AVCHD/Cameras, Phones or Removable Drive as I think SG is suggesting.
or
b. If your phone files are saved to a hard drive location, then Get Media/Files and Folders.
Are you also asking for export suggestions?
Thanks.
ATR -
Error in generating .cs file from wsdl
hi ,
I am trying to generate .cs file from wsdl using commond
wsdl
http://pni3w274:8080/tc5_services/WebServices/ModelEntity?wsdl /language:CS /out:rt.cs /protocol:SOAP
it give following errors
Error: Unable to import binding 'ModelEntitySoapBinding' from namespace 'http://
teamcenter.com/TCENT/webservices/2005-06/services/ModelEntity'.
- Unable to import operation 'getListOfClasses'.
- The datatype 'http://teamcenter.com/TCENT/webservices/2005-06/schemas/ModelE
ntity:GetListOfClassesInputParams' is missing.
my wsdl is
ModelEntityService.wsdl
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
targetNamespace="http://teamcenter.com/TCENT/webservices/2005-06/services/ModelEntity"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:wsi="http://ws-i.org/schemas/conformanceClaim/"
xmlns:imp0="http://teamcenter.com/TCENT/webservices/2005-06/schemas/ModelEntity"
xmlns:imp1="http://teamcenter.com/webservices/2005-06/schemas/WSFaults"
xmlns:tns="http://teamcenter.com/TCENT/webservices/2005-06/services/ModelEntity">
<wsdl:documentation>
The service provides Model Entity related operation.
</wsdl:documentation>
<wsdl:types>
<xs:schema>
<xs:import namespace="http://teamcenter.com/TCENT/webservices/2005-06/schemas/ModelEntity" schemaLocation="ModelEntity.xsd" />
<xs:import namespace="http://teamcenter.com/webservices/2005-06/schemas/WSFaults" schemaLocation="WSFaults.xsd" />
</xs:schema>
</wsdl:types>
<wsdl:message name="PresentationTierFault">
<wsdl:part name="ex0" element="imp1:RequestManangerFault" />
</wsdl:message>
<wsdl:message name="getListOfClassesRequest">
<wsdl:part name="in0" element="imp0:GetListOfClassesInputParams" />
</wsdl:message>
<wsdl:message name="getListOfClassesResponse">
<wsdl:part name="out" element="imp0:GetListOfClassesOutputParams" />
</wsdl:message>
<wsdl:message name="getCreateAttributesRequest">
<wsdl:part name="in0" element="imp0:GetCreateAttributesInputParams" />
</wsdl:message>
<wsdl:message name="getCreateAttributesResponse">
<wsdl:part name="out" element="imp0:GetCreateAttributesOutputParams" />
</wsdl:message>
<wsdl:message name="createModelEntityRequest">
<wsdl:part name="in0" element="imp0:CreateModelEntityInputParams" />
</wsdl:message>
<wsdl:message name="createModelEntityResponse">
<wsdl:part name="out" element="imp0:CreateModelEntityOutputParams" />
</wsdl:message>
<wsdl:message name="getValueSetForAttributeRequest">
<wsdl:part name="in0" element="imp0:GetValueSetForAttributeInputParams" />
</wsdl:message>
<wsdl:message name="getValueSetForAttributeResponse">
<wsdl:part name="out" element="imp0:GetValueSetForAttributeOutputParams" />
</wsdl:message>
<wsdl:portType name="ModelEntity">
<wsdl:operation name="getListOfClasses">
<wsdl:documentation>
Gets List Of all ModelEntity Classes.
</wsdl:documentation>
<wsdl:input message="tns:getListOfClassesRequest" name="getListOfClassesRequest" />
<wsdl:output message="tns:getListOfClassesResponse" name="getListOfClassesResponse" />
<wsdl:fault message="tns:PresentationTierFault" name="PresentationTierError" />
</wsdl:operation>
<wsdl:operation name="getCreateAttributes">
<wsdl:documentation>
Gets ModelEntity Create Attributes.
</wsdl:documentation>
<wsdl:input message="tns:getCreateAttributesRequest" name="getCreateAttributesRequest" />
<wsdl:output message="tns:getCreateAttributesResponse" name="getCreateAttributesResponse" />
<wsdl:fault message="tns:PresentationTierFault" name="PresentationTierError" />
</wsdl:operation>
<wsdl:operation name="createModelEntity">
<wsdl:documentation>
Creates Model Entity.
</wsdl:documentation>
<wsdl:input message="tns:createModelEntityRequest" name="createModelEntityRequest" />
<wsdl:output message="tns:createModelEntityResponse" name="createModelEntityResponse" />
<wsdl:fault message="tns:PresentationTierFault" name="PresentationTierError" />
</wsdl:operation>
<wsdl:operation name="getValueSetForAttribute">
<wsdl:documentation>
Gets Value Set For Attribute.
</wsdl:documentation>
<wsdl:input message="tns:getValueSetForAttributeRequest" name="getValueSetForAttributeRequest" />
<wsdl:output message="tns:getValueSetForAttributeResponse" name="getValueSetForAttributeResponse" />
<wsdl:fault message="tns:PresentationTierFault" name="PresentationTierError" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ModelEntitySoapBinding" type="tns:ModelEntity">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getListOfClasses">
<soap:operation style="document" soapAction="getListOfClasses" />
<wsdl:input><soap:body use="literal" /></wsdl:input>
<wsdl:output><soap:body use="literal" /></wsdl:output>
<wsdl:fault name="PresentationTierError"><soap:fault name="PresentationTierError" use="literal" /></wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getCreateAttributes">
<soap:operation style="document" soapAction="getCreateAttributes" />
<wsdl:input><soap:body use="literal" /></wsdl:input>
<wsdl:output><soap:body use="literal" /></wsdl:output>
<wsdl:fault name="PresentationTierError"><soap:fault name="PresentationTierError" use="literal" /></wsdl:fault>
</wsdl:operation>
<wsdl:operation name="createModelEntity">
<soap:operation style="document" soapAction="createModelEntity" />
<wsdl:input><soap:body use="literal" /></wsdl:input>
<wsdl:output><soap:body use="literal" /></wsdl:output>
<wsdl:fault name="PresentationTierError"><soap:fault name="PresentationTierError" use="literal" /></wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getValueSetForAttribute">
<soap:operation style="document" soapAction="getValueSetForAttribute" />
<wsdl:input><soap:body use="literal" /></wsdl:input>
<wsdl:output><soap:body use="literal" /></wsdl:output>
<wsdl:fault name="PresentationTierError"><soap:fault name="PresentationTierError" use="literal" /></wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="ModelEntityService">
<wsdl:port binding="tns:ModelEntitySoapBinding" name="ModelEntity">
<soap:address
location="http://localhost:80/PTierApp/WebServices/ModelEntity" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
and xsd is ModelEntity.xsd
<?xml version="1.0" encoding="UTF-8"?>
<!--
bcprt
This software and related documentation are proprietary to UGS Corp.
COPYRIGHT 2006 UGS CORP. ALL RIGHTS RESERVED
ecprt
-->
<xsd:schema targetNamespace="http://teamcenter.com/TCENT/webservices/2005-06/schemas/ModelEntity"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsc="http://teamcenter.com/TCENT/webservices/2005-06/schemas/Common"
xmlns:wlt="http://teamcenter.com/TCENT/webservices/2005-06/schemas/ModelEntity"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
<!-- ================================================================== -->
<!-- Package: ModelEntity -->
<!-- ================================================================== -->
<xsd:annotation>
<xsd:documentation>
The ModelEntity package defines elements and data types
for the parameters used by operations/messages of the ModelEntity Web Service.
</xsd:documentation>
</xsd:annotation>
<!-- ================================================================== -->
<!-- BEGIN: Get Model Entity List Of Classes: INPUT -->
<!-- ================================================================== -->
<xsd:element name="GetListOfClassesInputParams"
type="wlt:GetListOfClassesInputType"/>
<xsd:complexType name="GetListOfClassesInputType">
<xsd:sequence>
<xsd:element name="UserName" type="xsd:string"/>
<xsd:element name="Password" type="xsd:string"/>
<xsd:element name="Locale" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Get Model Entity List Of Classes : INPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN: Get Model Entity List Of Classes : OUTPUT -->
<!-- ================================================================== -->
<xsd:element name="GetListOfClassesOutputParams"
type="wlt:GetListOfClassesOutputType"/>
<xsd:complexType name="GetListOfClassesOutputType">
<xsd:sequence>
<xsd:element name="ClassList" type="wlt:ModelEntityValueDisplayedValuePair"
minOccurs="0" maxOccurs="unbounded" />
<xsd:element name="ReturnType" type="xsd:boolean"/>
<xsd:element name="ReturnMessage" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Get Model Entity Classes : OUTPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN: Get Model Entity Create Attributes: INPUT -->
<!-- ================================================================== -->
<xsd:element name="GetCreateAttributesInputParams"
type="wlt:GetCreateAttributesInputType"/>
<xsd:complexType name="GetCreateAttributesInputType">
<xsd:sequence>
<xsd:element name="UserName" type="xsd:string"/>
<xsd:element name="Password" type="xsd:string"/>
<xsd:element name="Locale" type="xsd:string" minOccurs="0"/>
<xsd:element name="ClassName" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Get Model Entity Create Attributes : INPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN: Get Model Entity Create Attributes : OUTPUT -->
<!-- ================================================================== -->
<xsd:element name="GetCreateAttributesOutputParams"
type="wlt:GetCreateAttributesOutputType"/>
<xsd:complexType name="GetCreateAttributesOutputType">
<xsd:sequence>
<xsd:element name="Attributes" type="wlt:ModelEntityCreateAttributes"
minOccurs="0" maxOccurs="unbounded" />
<xsd:element name="ReturnType" type="xsd:boolean"/>
<xsd:element name="ReturnMessage" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Get Model Entity Create Attributes : OUTPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN: Get Model Entity Value Set For Attribute: INPUT -->
<!-- ================================================================== -->
<xsd:element name="GetValueSetForAttributeInputParams"
type="wlt:GetValueSetForAttributeInputType"/>
<xsd:complexType name="GetValueSetForAttributeInputType">
<xsd:sequence>
<xsd:element name="UserName" type="xsd:string"/>
<xsd:element name="Password" type="xsd:string"/>
<xsd:element name="Locale" type="xsd:string" minOccurs="0"/>
<xsd:element name="Attribute" type="xsd:string"/>
<!-- optional criteria -->
<xsd:element name="Criteria" type="wlt:ModelEntityNameValuePair"
minOccurs="0" maxOccurs="unbounded" />
<!-- optional class name -->
<xsd:element name="ClassName" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Get Model Entity Value Set For Attribute : INPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN: Get Model Entity Value Set For Attribute : OUTPUT -->
<!-- ================================================================== -->
<xsd:element name="GetValueSetForAttributeOutputParams"
type="wlt:GetValueSetForAttributeOutputType"/>
<xsd:complexType name="GetValueSetForAttributeOutputType">
<xsd:sequence>
<xsd:element name="StaticValues" type="wlt:ModelEntityValueDisplayedValuePair"
minOccurs="0" maxOccurs="unbounded" />
<xsd:element name="ReturnType" type="xsd:boolean"/>
<xsd:element name="ReturnMessage" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Get Model Entity Value Set For Attribute : OUTPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN: Create Model Entity : INPUT -->
<!-- ================================================================== -->
<xsd:element name="CreateModelEntityInputParams"
type="wlt:CreateModelEntityInputType"/>
<xsd:complexType name="CreateModelEntityInputType">
<xsd:sequence>
<xsd:element name="UserName" type="xsd:string"/>
<xsd:element name="Password" type="xsd:string"/>
<xsd:element name="Locale" type="xsd:string" minOccurs="0"/>
<xsd:element name="ClassName" type="xsd:string"/>
<xsd:element name="Attributes" type="wlt:ModelEntityNameValuePair"
maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Create Model Entity : INPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN : Create Model Entity : OUTPUT -->
<!-- ================================================================== -->
<xsd:element name="CreateModelEntityOutputParams"
type="wlt:CreateModelEntityOutputType"/>
<xsd:complexType name="CreateModelEntityOutputType">
<xsd:sequence>
<xsd:element name="ObjectHandle" type="xsd:string"/>
<xsd:element name="ReturnType" type="xsd:boolean"/>
<xsd:element name="ReturnMessage" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Create Model Entity : OUTPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN : Create Model Entity Attributes : OUTPUT -->
<!-- ================================================================== -->
<xsd:complexType name="ModelEntityCreateAttributes">
<xsd:sequence>
<xsd:element name="DisplayedName" type="xsd:string"/>
<xsd:element name="Name" type="xsd:string"/>
<xsd:element name="StaticValues" type="wlt:ModelEntityValueDisplayedValuePair"
minOccurs="0" maxOccurs="unbounded" />
<xsd:element name="IsRequired" type="xsd:boolean"/>
<xsd:element name="HasValueSet" type="xsd:boolean"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Create Model Entity Attributes : OUTPUT -->
<!-- ================================================================== -->
<!-- ================================================================== -->
<!-- BEGIN : Model Entity Pairs : INPUT/OUTPUT -->
<!-- ================================================================== -->
<xsd:complexType name="ModelEntityNameValuePair">
<xsd:sequence>
<xsd:element name="Name" type="xsd:string"/>
<xsd:element name="Value" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ModelEntityValueDisplayedValuePair">
<xsd:sequence>
<xsd:element name="Value" type="xsd:string"/>
<xsd:element name="DisplayedValue" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<!-- ================================================================== -->
<!-- END : Model Entity Pairs : INPUT/OUTPUT -->
<!-- ================================================================== -->
</xsd:schema>check metalink note
Adpatch Fails With Error : adogjf() Unable to copy Registry.Dat.
Note:282153.1
also check (Adogjf() Unable To Copy Registry.Dat).
Note:382695.1 about the correct on the $806_ORACLE_HOME/forms60/java where it should be 755
make sure that you soruce the env fiel before adpatch and that ORACLE_HOME is poinitng to the correct oracle_home
fadi
Maybe you are looking for
-
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm hav
-
How to get the number of files currently open?
hi, does any one know how to get the number of files currently open in windows OS? e.g. lets say .txt files... any comment will be really appreciated. thanks
-
Regarding settings in standrad report "s_alr_87012277"
Dear Guru's, Presently we are using new version 6.0, in that i am facing a problem in the report "s_alr_87012277",This is for G/L account balances. when they are 2 values for one g/l account with separate business area,their total should be calcula
-
Acrobat 9 Pro Extanded tacking system
Hi all, It ry to make a flow by sending and collecting forms using the track form facility. The 1st step "sending" is OK but despite I send back a filled form using a 2nd email address and the message is properly received back in MS Exchange sending
-
In the following, pressing the Tab key does absolutely nothing. What happend to it? How can I get at it? (I'm writing a code editor - gotta have the Tab key.) import java.awt.event.KeyEvent; import java.awt.event.KeyListener; import javax.swing.JFram