Audio suddenly drop off when Airplaying video into Apple TV

I´m trying to stream the content from my MacBook Air into my TV via my Apple TV using Airplay. Both audio and video work fine the first seconds on the TV then, suddenly, the sound drops off.
All the sw is updated, the problem began after the latest Apple TV update.
Does anybody have any ideas on how to solve this ?? (The solutions exposed in other threads doesn´t solve my problem)
Thank you in advance

+I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
+If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
A used Mini will usually lack the Apple warranty.
Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software.

Similar Messages

  • G460 Suddenly Shut OFF when forwarding video or doing some tasks

    Hy, I have problem with my Lenovo G460.
    When I played video, any kind of video, it's just running normal.
    But, when I forward it just a little bit, it shut off without warning or anything.
    I've tried to open the bottom cover and try running it.
    The VGA fan seems OK to me, it run like usual.
    I Don't know what happen.
    My only clue is that, the charger has 4 kind of sound.
    1. When plug in to the electricity,
    2. When plug in to the electricity and plugged into the Laptop,
    3, When plug in to the electricity and plugged into the Laptop when the laptop is ON,
    4. The sound that coming after it suddenly shut OFF.
    Is it the charger, or the laptop charge core???

    hi,
    can you check if there's any mini dump file in folder c:/windows/minidump. if there's any, please, copy it to desktop, upload it somewhere (rapidshare.com) and post the link back.

  • Can I keep audio on iPad when airplaying video to Apple TV?

    Instead of using long earphone cables to my TV, I would like to keep sound to my iPad when I AirPlay a movie to my TV set through Apple TV. Is it possible?

    Hi,
    Thanks for your assistance, but I spent quite some time researching this before posting, and the post you link to (which I've already read) doesn't actually answer my question, that person is asking about his wireless speakers receiving individual sound channels through airplay. Other discussions, which I've also looked at, seem inconclusive.
    I was really posting in the hopes of finding anyone who had personal experience of trying to play a fullscreen, 5.1 surround video file using airplay mirroring from their mac to their Apple TV, and if they received 5.1 sound.
    Thanks again for your help though.

  • Cant use wifi after updating to ios6 on iphone 4. Wifi signals drops off when watching videos. Wifi works on other devices

    Cant watch videos through wifi since updating to ios6 on iphone 4. Wifi works on other devices. Currently using BT wireless router. I believe this is a common issue but cant rectify

    Cant watch videos through wifi since updating to ios6 on iphone 4. Wifi works on other devices. Currently using BT wireless router. I believe this is a common issue but cant rectify

  • Sound drops off when using hdmi outport to connect computer to an AV reciever

    Satellite M640,I5 2410 processor, windows 7HP. After about three minutes the sound drops off when connected to the av reciever through the hdmi outport. If I touch the trackpad the computer reconnects for another three minutes and  then disconnects. If I touch the the trackpad about every two minutes the computer stays connected indefinetly. This problem does not occur if I use the computer to play an audio CD. Any fix suggestions.

    Hi peter,
    try to repair your permission by open application folder > utilities > disk utility > repair permission.
    It should fixed the unexpectedly quit for several applications.
    And try to get latest info from Griffin sites, maybe this one will help too:
    http://www.griffintechnology.com/support/article.php?artnum=314
    ps: why not try macbook built in microphone?
    Good Luck.

  • Apple Raid dropping off when doing most data renders

    Apple Raid, fully occupied, 3 TB is dropping off when doing renders. Unit is connected via fiber to Mac intel running FCP 7, OS 10.6. Problem has been going on a for a while. Drive will sometimes drop off, when no renders are occurring. Also, drive performance is slower. Although drives are striped all the way accross, front performance meters, do not operate together. Any thoughts as to what is not working?

    When the disconnect happens, what does your system log report?  Have you logged into Raid Admin and checked the device logs?  What do they report?

  • When I use my 5 year old MBP on battery it suddenly shuts off when the battery life reaches 88%.  Anyone know why and how to fix it?

    when I use my 5 year old MBP on battery it suddenly shuts off when the battery life reaches 88%.  Anyone know why and how to fix it?

    Model Information:
      Manufacturer:          Sony
      Device Name:          ASMB012
      Pack Lot Code:          1
      PCB Lot Code:          0
      Firmware Version:          110
      Hardware Revision:          500
      Cell Revision:          303
      Charge Information:
      Charge Remaining (mAh):          4108
      Fully Charged:          Yes
      Charging:          No
      Full Charge Capacity (mAh):          4200
      Health Information:
      Cycle Count:          40
      Condition:          Service Battery
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12361

  • Importing home videos into Apple TV

    I am trying to import my home videos into Apple TV. I have created a video consisting of many clips which are edited together into a coherent whole. This has been saved as an iMovie event. When I try to export this event through Quicktime, all I see are individual clips for import. Where do I find the whole editing video?
    Norman

    Try using the Share > iTunes... menu item in iMovie, then sync the movie to Apple TV from iTunes. This is the easiest way of getting an iMovie project onto Apple TV. Is this what you've been doing?

  • How can I convert DVD- video into Apple's format so that it can be played and streamed from my Mac?

    How can I convert DVD- video into Apple's format so that I can play the content on my Mac and also stream it to my Apple TV? A few years ago, I transferred all of my home videos onto DVD but now would really like to put these onto my Mac and stream them through Apple TV to watch on the "big screen". Any advice would be most welcome!! Thanks

    MPEG Streamclip.
    Apple do not have their "own" format. You need to convert your DVDs to H.264 though.

  • Missing audio track when importing video into Premiere Pro CS3

    When I import my M2TS video into the editor there is no audio when viewed in the source.  There is also no audio track when I drag a clip down to the timeline.  Any fix for this?

    I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
    I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
    I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

  • When downloading video into FCP my two audio tracks are locked together.

    When downloading HD video into FCP my two audio tracks are locked together. Channel one will not separate from channel two. Not good. One channel is my miked talent, the other abient. Any suggestions? I cannot find the problem. Sequence settings? Preference settings?
    Help!

    gary Boland wrote:
    When downloading HD video into FCP
    I think you mean "importing", not downloading.
    Downloading is when you copy a file from an Internet server to your computer.
    Channel one will not separate from channel two.
    Any suggestions?
    Select the two tracks and choose Modify > Stereo Pair
    Or you can just use the keyboard shortcut option-L

  • Audio Suddenly Drops Out

    I have produced a video using FCE 4 that is approximately 34 minutes in length. Pretty standard football highlights video with 10 separate chapters. The projects ends with a number of photos set to music (approx the last 4 minutes of the video).
    The final product plays just fine in FCE, in the .mov file, and after exporting to iDVD. I have burned 3 disks so far in iDVD and about 31 minutes in (after several photos) the music track cuts out. I have done several projects like this before and never experienced a sudden drop out of the music. I am using the new iLife 11 which I believe iDVD is the same as '09.
    Can someone tell me what I am doing wrong here? I read that it may have to do with Chapters which makes little sense because the .mov file and iDVD versions play fine.
    Any help would be appreciated!

    OK, here is what I have done and I am still experiencing the same exact issue:
    1. Created 35 minute video using FCE 4. Couple hundred pieces of video sewn together in the first 9 chapters and about 240 photos (shown at 2 second intervals) in the last chapter of the video
    2. Created both a mixed down and non-mixed down version
    3. Exported using Quicktime Movie
    4. The .mov versions of both movies play all the way through with no issues. Entire video, audio, and music all in tact and play seamlessly
    5. Created DVD's using iDVD.
    6. About 104 picture into the last chapter, or at the 31:08 mark the pictures continue to the end and the audio (music) mutes. This happens exactly at the same time on both the mixed down and non mixed down versions.
    7. I went back to test the original FCE file and it is good all the way through, I also tested the .mov versions and both (mixed down and non mixed down versions) are good, I also tested the iDVD file and both versions play all the way through on my iMac.
    8. DVD's both lose the audio at the same time.
    Aaaaarggggghhhhh! Thanks in advance for any helpful solutions.

  • NO SOUND WHEN MOVING VIDEOS INTO iMOVIE!! something about Mpeg muxed?!?!

    I recorded my videos with my sony cybershot camera - no problems. I can rip them onto my Macbook Pro and watch them in quicktime and hear the sound just fine - no problems. But, when I pull the videos into iMovie HD to edit and try to watch the play back, I see video but no sound!! I looked in the help tab and it said that if my videos are Mpeg 1 "muxed" (or something like that) then I won't be able to hear any sound. Well how do I convert my videos to something that will allow me to hear the sound when I'm editing them in iMovie HD???
    Any help would be greatly appreciated!!!!!!!
    Thanks!
    Macbook Pro   Mac OS X (10.4.8)  

    Welcome to discussions, designerman.
    iMovie can't import MPEG1 or MPEG 2 files, and that's waht you are trying to do.
    Read this:
    Can not hear audio in iMovie when I import an MPEG clip
    http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
    :)Sue

  • Why is my audio 2 frames off of my video?

    when capture video and playback the audio is exactly 2 frames behind.  why is this?  is it an equipment issue or is it an upload/setting issue?  i'm not using the built in mic but an add on shotgun mic that plugs into camera directly.  it's fixable but tediously so.

    Usually it's a mis-match between camera audio rate and the FCE Sequence.
    For example:  If the camera shot 12 bit or 32 kHz audio and the default FCE Sequence 16 bit or 48kHz is used, unless it's changed to match, sync issues arise.
    If you provide specific info on these items we may be able to assist with the trouble.
    Al

  • Error when putting video into iDVD

    I've tried the numerous ways to put my iMovie video into iDVD, but all of them come up with the same error message:
    Unsupported filetype: broken reference movie in:
    I would appreciate any help because I am on a deadline.
    Thank you,
    wychehaesel

    More background would be helpful about what you've tried - generally you'll have greater success importing into iDVD (drag/drop, File/Import, or using iDVD Preferences) rather than exporting. What happens when you preview your iMovie? Have you moved or modified Any assets or iMovie files after finishing your movie editing?
    John

Maybe you are looking for

  • Is there anyway to have an application use the output for Alerts/Sound Effects?

    I am trying to set some applications to use the output designated for the System Alerts and Sound Effects, while other applications continue to use the regular Output?  I am using the Audio MIDI Utility with Aggregate/Multiple Outputs.

  • Why Doesn't the Acrobat File Toolbar Have a "Save As" Button?

    One of the most frequently used functions in Acrobat is located under the File menu where you can select "Save As" to select from a number of different file formats and then save the file in a specified folder.  The File Toolbar includes a "Save" ico

  • Calendar on iOS 7

    Is there a way to view an entire day at once on my calendar in iOS 7 without toggling up and down? What about viewing a week at a time without toggling between individual days? The new calendar is SO laborious, I will give up my iphone rather than bu

  • Headphones no longer work after ios8 update to Iphone 5

    My plug in head phones no longer work after updating to IOS8.  I thought it was the head phones and bought new ones - they don't work either.  I updated my iPad and both head phones work.  Phone is IPhone 5 - not due for an upgrade until December.  A

  • Open documents from LabVIEW

    I want to open documents from one aplication made up with LabVIEW. The documents can be Word, Pdf, Excel and so on. Coes anybody know how do this? Thanks