Audio Suite error CS5

1.- Flash CS5 delete audio files when I save in CS4.
2.- I can not import audio. mp3 (and check the audio properties).
3.- The audio is out of sync even though it has stream property.
And uninstalled and then reinstalled and the problem persists, should, it's codecs, updates??? (I have them all). This happens to me at least 4 machines with Windows Vista. Normally I work in AS2 and the public in Player 8. But the same thing happens when I publish in Player 10.
CS5 to CS4 fails to audio issues.

Presumably you mean after export to PDF or SWF. I don't know about SWF, but I'd bet you could build a button in Acrobat that would trigger a script to play a random audio file.

Similar Messages

PAX PCI XFI PAX Audio Suite DVD 2011 V1.05

PAX PCI XFI PAX Audio Suite DVD 20 V.05
? Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland.
PAX related logos and software and drivers are own by PAX ?
- Please don't remod my work with out permission you can contact me at Hardwareheaven.com
Celebrating
6 years of PAX drivers.
- XP/Vista/Win7 ? 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
PAX PCI XFI Audio PAX Suite DVD 20 V.05
CD is based from the Official Creative Titanium Cd
?Tweaked Edition?
Supported cards:
Sound Blaster X-Fi XtremeGamer Fatalty? Professional Series
Sound Blaster X-Fi Platinum Fatalty Champion Series
Sound Blaster X-Fi XtremeMusic
Sound Blaster X-Fi XtremeGamer
Sound Blaster X-Fi Platinum
Sound Blaster X-Fi Fatalty
Sound Blaster X-Fi Elite Pro
Sound Blaster X-Fi
Soundblaster X-Fi OEM Cards: Dell, HP and Gateway
Setup should work with any XFI Card now!
UHAA FULL Support now.
Supported OS:
Fully working Suite for XP, Vista, Win7
32 and 64Bit
Based on:
SBXF_PCDRV_LB_2_8_005_5
+ Updated Tweak As of 4.22.
Base on V4.5 driver set
Software Components:
Creative Console Launcher
Creative Software AutoUpdate
Creative Audio Console
Creative 3DMIDI Player
Creative Diagnostics
THX Console
Creative SoundFont Bank Manager
Creative AutoMode Switcher
Creative Sound Blaster Properties
Creative Sound Blaster Properties x64 Edition
Creative Karaoke Player
Creative Smart Recorder
Creative Vienna SoundFont Studio
Creative Volume Panel
WaveStudio 7
Creative Media Toolbox
Creative Auto Tag Cleaner
On Screen Display
Sound Blaster Plugin x64 Edition for Microsoft Media Center
Creative ALchemy (X-Fi Edition)
APOIM
Get PowerDVD
SoundFont Banks
Media Samples
Online Manual
Music Creation Guide
MIDI Guide
Audio Drivers
- Creative Speaker Connection Wizard won't work on win 7 anyway.
- Creative Product Registration don't need it.
Creative Entertainment Center You can installed by via installer.
CMS You can installed by via installer.
CMS_PCAPP_LB_3_30_2 You can installed by via installer.
CMS5 You can installed by via installr.
DVDAudio32BitOnly You can installed by via installer.
Custom Setup only Support you can choice which installer stuff you want into installed look threw the list carefully
Important :
Before installing, remove all traces of any previous x-fi drivers and all x-fi driver related software, using add/remove programs within the control panel and following that, by removing the driver within "Device Manager". To clean up any excess files left on your system, you should use a 3rd party program to do this job (unless you've a good understanding of the registry) A recommended program to do this is Driver Sweeper - which is freeware, and available from http://www.guru3d.com/category/driversweeper/ or paid version at hardwareheaven.com driver cleaner.net
To install the software suite and driver :
Providing you've followed the steps above, restart your computer and run Setup.exe. Follow through the prompts until the installation has completed.
Please used register cleaner like tune up Advanced SystemCare iobit.com or crapcleaner
Please make sure you installed lastest direct x included in the suite of June 200 if you haven't done so.
What is Pax?
Formally known as Youpax, Pax was founded by Robert McClelland 6 years ago, who is continuing to provide an alternati've tweaked driver to the Official driver released by Creative.
Why should I install this Pax alternati've?
Pax is aimed at improving sound quality and to give a more deeper bass sound, while retaining the clarity of the overall output audio. Most users continue to use Pax drivers once moving over and never look back!
Not going reupload just few errors in readme but drivers are fine. Enjoy This set for drivers base on all os v4.5 drivers that way you don't have used single set.
For support, feedback and latest driver updates, please visit : http://www.hardwareheaven.com/pax-drivers/
http://www.technewshw.com/forum/index.php
http://forums.guru3d.com/
http://www.paxyoursoundout.com/
PAX? 2005-20
http://dl.technewshw.com/drivers/PAX...2020%20V.05.7z

Hi [url=". . . . . user/viewprofilepage/user-id/2876">robertmc8[/url]?. It's the first time I'm writing to you. I have a PC with dual boot winXP and win7 x64.
It's an nforce4 ultra system with 2GB ram.
My soundcard is an x-fi elite pro.
The problem is that I have crackles and pops in windows 7 only.
I know this is an issue with nforce4 boards and Pci x-fis.
The only solution is to put my soundcard in audio creation mode and bit-matched playback.
In entertainment and game mode I can't do anything.
Is there any way to solve this problem with your or any other drivers in the future?
Thank you...

PAX PCIe XFI PAX Audio Suite DVD 2010 V2.00

PAX PCIe XFI PAX Audio Suite DVD 200 V2.00
? Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland.
PAX related logos and software and drivers are own by PAX ?
- Please don't remod my work with out permission you can contact me at Hardwareheaven.com
Celebrating
5 years of PAX drivers.
- XP/Vista/Win7 ? 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
PAX PCIe XFI Audio PAX Suite DVD 200 V2.00
CD is based from the Official Creative Titanium Cd
?Tweaked Edition?
Supported cards:
Sound Blaster X-Fi Titanium Fatalty? Champion Series
Sound Blaster X-Fi Titanium Fatalty Professional Series
Sound Blaster X-Fi Titanium Professional Audio
Sound Blaster X-Fi Titanium
Supported OS:
Fully working Suite for XP, Vista, Win7
32 and 64Bit
Based on:
Creative Sound Blaster X-Fi Titanium Driver 2.7.0007
+ Updated Tweak
+ Console Launcher V2.6.48 Beta
+ Fix X64 Components
+ AutoMode .0.05
+ Added New Name PAX AUDIO
+ DVDAudio32BitOnly
+ Creative Entertainment Center
+ CMS
+ CMS5
+ CMS_PCAPP_LB_3_30_2
+ Directx June Edtion 200
+ DTS_PCAPP_LB__03_08
+ DDL_PCAPP_LB_3_00_06
+ Fix the errors in the setup using June edtion setup.
Software Components:
Creative Console Launcher
Creative Software AutoUpdate
Creative Audio Console
Creative 3DMIDI Player
Creative Diagnostics
THX Console
Creative SoundFont Bank Manager
Creative AutoMode Switcher
Creative Sound Blaster Properties
Creative Sound Blaster Properties x64 Edition
Creative Karaoke Player
Creative Smart Recorder
Creative Vienna SoundFont Studio
Creative Volume Panel
WaveStudio 7
Creative Media Toolbox
Creative Auto Tag Cleaner
On Screen Display
Sound Blaster Plugin x64 Edition for Microsoft Media Center
Creative ALchemy (X-Fi Edition)
APOIM
Get PowerDVD
SoundFont Banks
Media Samples
Online Manual
Music Creation Guide
MIDI Guide
Audio Drivers
Creative Entertainment Center You can installed by via installer.
CMS You can installed by via installer.
CMS_PCAPP_LB_3_30_2 You can installed by via installer.
CMS5 You can installed by via installr.
DVDAudio32BitOnly You can installed by via installer.
Custom Setup only Support you can choice which installer stuff you want into installed look threw the list carefully
Important :
Before installing, remove all traces of any previous x-fi drivers and all x-fi driver related software, using add/remove programs within the control panel and following that, by removing the driver within "Device Manager". To clean up any excess files left on your system, you should use a 3rd party program to do this job (unless you've a good understanding of the registry) A recommended program to do this is Driver Sweeper - which is freeware, and available from http://www.guru3d.com/category/driversweeper/ or paid version at hardwareheaven.com driver cleaner.net
To install the software suite and driver :
Providing you've followed the steps above, restart your computer and run Setup.exe. Follow through the prompts until the installation has completed.
Please used register cleaner like tune up Advanced SystemCare iobit.com or crapcleaner
Please make sure you installed lastest direct x included in the suite of June 200 if you haven't done so.
What is Pax?
Formally known as Youpax, Pax was founded by Robert McClelland 5 years ago, who is continuing to provide an alternati've tweaked driver to the Official driver released by Creative.
Why should I install this Pax alternati've?
Pax is aimed at improving sound quality and to give a more deeper bass sound, while retaining the clarity of the overall output audio. Most users continue to use Pax drivers once moving over and never look back!
PAX? 2005-200
http://dl.technewshw.com/drivers/PAX...200%20V2.00.7z
Setup should work now with no error again let me know I don't own PCI E card thanks

/Re: PAX PCIe XFI PAX Audio Suite DVD 200 V2.00?do you mean the v.00 with june edition?(http://forums.creative.com/t5/Sound-...00/td-p/559003) or are you talking about directx?(i already have latest directx installed with dxwebsetup)
oh and an rebuild with the new official would be really nice:smileyvery-happy:.
btw the issue with install is, at 4 or 5 % it starts to loop back at the installer and it wants me to change the programs i want to install, if i do that it keeps doing that, if i click cancel installation continues but i get all kind of errors different points
update:I first tried your v.00 aswell but it also failed partly thought i did have sound after install, then I installed daniel k his driver iso cd and it installs just fine.(so its prob issue on your end)

I want to upgrade to CS6 Production Premium suite from CS5.5. Can I use CS6 upgrade made for CS5, or do I have to use upgrade that specifically states for CS5.5.

I want to upgrade to CS6 Production Premium suite from CS5.5. Can I use CS6 upgrade made for CS5, or do I have to use upgrade that specifically states for CS5.5.
I am referring to the DVD installation Disks not Cloud. Disk last release, I believe in 2012.
Thank you.

at the link i posted i see an upgrade for cs5 and cs5.5.
you can contact adobe support if you don't see that.
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

HpPavilion dv6 notebook PC.beats audio High definition audio CODEC error(52)

Hi can anyone help me please?
I have a audio problem so you will need to talk loud! lol. Volume on mute.
HP Pavilion dv6 notebook PC.
B3K20PA#ABG
windows 7
stwrt64.sys version 6.10.6418.0
High Definition audio CODEC error (52)
Thanks
This question was solved.
View Solution.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56429.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load - it will automatically load an audio driver, but just let it complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

The "alsa audio output error: cannot write: Broken pipe" problem

[Solved]
(No place for this word in the Subject field, so I put it here.)
Hi Arch community!
I noticed I have this problem and not sure when in started. Several months ago I bought and installed new videocard "GeForce GT 630". Right after installation I lost sound in the system. Having internal sound card (in mainboard) and SB Audigy2 (PCI), I searched for solution and found I had to disable "snd_hda_intel" module to restore sound to work through PCI sound card. Did it.
echo "blacklist snd_hda_intel" >> /etc/modprobe.d/no-nvidia-sound.conf
After that sound was working as it should. And I noticed recently that during playing of any sound file the sound interrupts. If run VLC from CLI I get "alsa audio output error: cannot write: Broken pipe" message. And my system hasn't been upgraded since I don't know when. I still ran Firefox 26. So googled again and found it's a bug in a kernel or somewhere else.
==========================================
https://bugs.freedesktop.org/show_bug.cgi?id=69942 :
2013-10-01 01:39:40 UTC
I ran a system update last night, and this issue appears to have been corrected.
==========================================
And so I thought upgrade would fix my problem since mainstream bug is fixed. After upgrade sound interrupts again, maybe even more often.
Do you guys have this issue and does anyone have a solution?
Last edited by Mr. Alex (2014-06-26 18:55:59)

Not particularly wise to blacklist the module, since it probably is also used by the integrated sound card. With vid and pid you could just disable the nvidia card alone using parameter enable=0. Unless you do not mind having both disabled.
Where do I need to input "enable=0"? When I was searching for solution to make my Creative card work with new nVidia card I installed, the only way I found was blacklisting the module.
dmesg says:
[ 20.448086] nvidia 0000:02:00.0: irq 42 for MSI/MSI-X
[ 21.112331] NVRM: Your system is not currently configured to drive a VGA console
[ 21.112340] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 21.112345] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 21.112349] NVRM: drivers including, but not limited to, vesafb, may result in
[ 21.112352] NVRM: corruption and stability problems, and is not supported.
Then:
lsmod | grep 'snd'
snd_ca0106 36242 0
snd_ac97_codec 114896 1 snd_ca0106
ac97_bus 1270 1 snd_ac97_codec
snd_rawmidi 20278 1 snd_ca0106
snd_seq_device 5244 1 snd_rawmidi
snd_pcm 83207 2 snd_ac97_codec,snd_ca0106
snd_timer 19294 1 snd_pcm
snd 60780 6 snd_ac97_codec,snd_timer,snd_pcm,snd_rawmidi,snd_seq_device,snd_ca0106
soundcore 5551 1 snd
I guess my card is "snd_ca0106". If yes,
# systool -v -m snd_ca0106
Module = "snd_ca0106"
Attributes:
coresize = "36242"
initsize = "0"
initstate = "live"
refcnt = "0"
taint = ""
uevent = <store method only>
Parameters:
enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
subsystem = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
Sections:
.bss = "0xffffffffa0814780"
.data = "0xffffffffa0813300"
.exit.text = "0xffffffffa0811a1e"
.gnu.linkonce.this_module= "0xffffffffa0814500"
.init.text = "0xffffffffa0817000"
.note.gnu.build-id = "0xffffffffa0811a30"
.rodata = "0xffffffffa0811a80"
.rodata.str1.1 = "0xffffffffa08123dc"
.rodata.str1.8 = "0xffffffffa0812130"
.strtab = "0xffffffffa0818c10"
.symtab = "0xffffffffa0817020"
.text = "0xffffffffa080d000"
__mcount_loc = "0xffffffffa0812f98"
__param = "0xffffffffa0812f18"
__verbose = "0xffffffffa0814460"
Where would I look for "max_buffer_size" parameter?

Where I can download the plug-in for my new camera Nikon D610 (NEF) for my Adobe Creative Suits 5 (CS5).

Where I can download the plug-in for my new camera Nikon D610 (NEF) for my Adobe Creative Suits 5 (CS5).

That is a new camera for CS5 you will need to download Adobe 8.6 DNG converter avn create DNG files for your NEF files and use CS5 ACR with the DNG files

HELLO, I HAVE THE SNOW OF LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ... THANK YOU

HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!

Have a look here:
http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
(Like any website owner, I may (or may not) derive compensation from my website)

DONT PREVIEW FILES IN AUDIO SUITE

This will cause this lovely app to crash - just though I'd warn people trying to use audio suite with logic 7.2.1 -

fair enough, didn't assume you were complaining.. since this has been a long standing and much discussed issue, and since emagic always said that it was all due to a lack of cooperation with digidesign to implement all TDM features properly.. I guess I figured it was about time digi got pestered about it..

IDVD audio encoding error

I currently have 10 different quicktime files that i've created by exporting 10 different iMovie projects.
I've created an iDvd project and dragged all 10 .dv files in. Everything works well in the preview. the total project is 3.6 out of the 4GB available.
the entire project is on an 250 GB external harddrive attached to a mac laptop (so having available space is not the problem, i have over 130 gigs free)
i press burn, and the encoding begins. everything's running smoothly for two hours, all the videos are encoded. once it reaches "Audio encoding" i come across an error. it recommends me to "Delete Encoded Assets" and try again.
Which i have, and it's still not working.
Something about the Track.
i've created dvd's before with this exact same hardware. I even just created one now, using just one of the quicktime files. For some reason, this big project just won't happen and i'm on the edge of reason here.
I'd appreciate any help.
Mac OS X (10.4.1)

Is there any audio associated with the video?
iDVD 5: Audio encoding error when burning a DVD
http://docs.info.apple.com/article.html?artnum=301876
iDVD: Troubleshooting issues with burning discs
http://docs.info.apple.com/article.html?artnum=302925
Sue

Idt high definition audio CODEC error (39)

HP Pavilion dv4 Notebook PC - operating on Windows Vista Home Premium (32 bit)
HP support assistant reads:
IDT High Definition Audio CODEC - Error (39) - Driver stwrt64.sys - version 6.10.6047.5
Recently uninstalled and reinstalled itunes and now when i open it says "itunes has detected a problem with your audio configuration" and wont play songs

Thanks billaboard for your response.
Unfortunately, I gave up waiting for an answer and just re-set the laptop back to factory specs.... then spent the next 8 hours re-installing programs & updating windows & the HP programs to the current versions.
I won't be using an NCH product again.
In terms of who I should be asking, I would point out:
I used the inbuilt HP Support Assistant on my laptop, to diagnose why my sound wasn't working. It identified the drivers that were at issue.
I uninstalled all NCH programs
I downloaded the correct HP Audio drivers & reinstalled them. They advised it was a successful install. 8 times.
Each time I rebooted, I would run the HP Support Assistant again and it would then identify that the HP drivers were not working.
The HP Support Assistant link, for further help, led me here. If this isn't the correct place to ask for help.... a site labelled "HP Support Forum", then where the hell is ?
Thankyou again for your response. If I have further issues with other programs, I will follow your advise and re-install the offending program, before un-installing.

Nokia 701 Nokia Suite error

Windows 7 Premium x64. Install Nokia Suite 3.2.100. It installs with no errors. Connect 701 via USB cable, more drivers install with no errors. When I tell it to check for updates I et the following message;
"Somethings gone wrong. It seems that some program files of Nokia Suite are missing. To fix this, please uninstall nokia suite and download the latest version of the application ..."
I've done this mulitple times and receive the same message.
Solved!
Go to Solution.
Attachments:
Nokia Suite error.docx ‏2520 KB

Hello,
Error has been fixed and Nokia Suite 3.4 contains the fix. You can download and install latest beta version of Nokia Suite from here ...
To download the installer, you need to log-in with the SAME credentials that you use on this Forum..
Best regards,
Marina
Nokia Suite team
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

Will there be a new Technical Communication Suite when CS5 will be released next month ?

Dear Forum,
will there be a new Technical Communication Suite when CS5 will be released next month (April 2010) ?
We are close ordering the Technical Communication Suite 2 - will there be a grace period to get the
new version without getting charged again ?
Greetz from Europe,
Speedtriple

I'm wondering about that too.
I've been stuck before when I bought TCS, then tried to upgrade just Captivate when v4 was released, and couldn't do it. Took months to get my money back for the CS4 download.
Seems that anyone who buys a suite gets penalized for it. Surely it's in Adobe's best interest to upgrade users who invested in the more expensive product?

Audio Codec error box when I try to view a clip in Edit Box

Just started trying to use Pr E 7. Vista
I get the media from an external hard drive, drag it to the timeline box. When I try to 'play' it, I get an
"Adobe Default Windows Sound Device" box that says:
Device: IDT High Definition Audio CODEC
Error Code: FFA-8-000D (80040154)
Info:
Playback failed
The audio system does not seem to respond.
Maybe card does not support full duplex mode.
The funny thing is the clip that I'm trying to play doesn't have any audio in it.
Any ideas would be appreciated.

You are most welcome.
So very much depends on the exact process used to encode the AV (Audio & Video) file. There are many encoding processes, that will create elemental streams, i.e. Audio-only, or Video-only files. However, many schemes, and many programs, that will create a muxed (multiplexed, or combined Audio & Video) files, and though there is no Audio signal, a silent Audio Track will be written. You can even do this yourself from Share/Export. If you choose a common format, like DV-AVI, you will have the option to Export Video, and Export Audio, and also have Multiplexing choices. If you remove all Audio from the Timeline, but choose both Video & Audio, and set Multiplexing to DV, you should end up with a muxed DV-AVI file, that will have a 48KHz 16-bit PCM/WAV Audio track embedded, but it will be silent. G-Spot will tell you the specs. of that Audio stream, even though there is no signal in it. When you go to Import, or play that file, the NLE, or player will need to "handle" the Audio too, though there is no signal.
Now, going back to the digitizing process, one can often set Audio to None, or Multiplexing to None. This will depend on the software, and/or hardware used, but one might be able to output an elemental stream, with Video-only. Some programs and hardware are pretty much "hard-wired" to do only an Multiplexed AV file, regardless of the lack of a stream for either of those.
When doing any Multiplexed AV files, it is prudent to check both streams, even if the source material is lacking one stream. You want the specs. to match, with say even a silent Audio stream set to 48KHz 16-bit PCM/WAV (the general specs. for DV/DVD files). If one accidentally allows the software, or hardware, to write an "off-spec." file, say MPEG Audio at 22KHz 12-bit, problems can arise, even though there is no Audio stream. There will be one, at those specs. for the silent Audio in the resultant file.
On the surface, and at first thought, this is not intuitive. Hey, we have silent footage! What's that Audio stream doing there? Well, it's because the file is a Multiplexed AV file, and was probably set up that way by the capture/digitizing/output program, and it did not know that you would not have an Audio signal.
Hope that this helps,
Hunt

Audio Suite error CS5

Similar Messages

Maybe you are looking for