Audio surround channel missing - Please advise?
Hi,
I am using DVDSP3 to compile a DVD-V with 5.1, AC3, Apack encoded Dolby Digital Surround sound. The problem is when I playback the session all audio channels playback correctley except the rear left surround, which doesn't playback at all.
I have tried to pin point the problem with the following: -
1. It works fine in Pro Tools where the piece was compiled. I have re-imported the discrete surround stems bounced from Pro Tools back into Pro Tools and all is well. (Audio track can be seen and audio is present)
2. I have encoded the stems with A.Pack and decoded them in A.Pack to see if there was a problem there and that works fine also.
As soon as I bring it into DVDSP, during playback, during simulation and during export DVD image (TS_Video and TS_Audio files) the Rear Surround channel is just not there.
I have tried various combinations of build and format settings in desperation,, in case it was a glitch but with no success.
There are no menus on the DVD, all I have done is configured it to start straight away on playback.
Please can anyone help offer any advise, I need to get this sorted quick and am running out of ideas!
Thanks in anticipation.
Hi Kassey.
Do you mean rear surround as in 6.1 configuration? A.Pack does not provide for inclusion of a rear surround channel. But Compressor 2 and Compressor 3 do include this functionality. Compressor 3 comes with latest FCP Studio2. Unfortunately there is no upgrade path for DVD SP as a standalone application, only as a part of full Studio upgrade.
Message was edited by: aspalex
Similar Messages
-
Up until recently, when I would download a pdf file, it would automatically open, and recently, for some reason, it stopped opening automatically and just downloaded to my desktop where I wanted it. I found instructions on Mozilla if files downloaded but not displayed, that included displaying my profile folder and then deleting it. I trashed it (different from deleting?) and now if I try to open Firefox, I get the message that Firefox can't open/load because profile is missing. Please advise how I can get the profile folder back in.
thanksCreate a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
After a PC crash I managed to restore my iTunes Library only partially.
My music is all there. But my ratings and playlists are missing.
Please advise how I can fix this.
On my IPod Classic a still have all the music and the playlists. Is it possible to use this? Synchronise from i-Pod to iTunes??Hi, I have a similar problem on my iMac with unusable internal drive: https://discussions.apple.com/thread/3031967
Dirtylobster wrote:
4. Install win7 in your brand new virtual environment but after first step in the installation where it will reboot after unpacking the files - TURN OFF YOUR VIRTUAL MACHINE. You got 10 seconds to do that.
Failure to do so will mess up the install and you must start over.
I'm not sure if I should take a chance... Could you please explain step 4 a bit more detailed? Do I have to click on "reboot" (where?) and then within 10 seconds turn off the virtual machine? HOW would I do that? THANKS!
EDIT: Did you read the following too?
http://forums.macrumors.com/showthread.php?p=10601274
What do you think of this alternative...? Thanks again.
Message was edited by: coxorange -
Hello. the App store app is missing on my IPAD> I cant find it under the 'search' function either... Please advise. Thank you.
Go to the General -> Restrictions settings and see if the App Store has been disabled there.
If not, try resetting the Home Screen: General -> Reset -> Reset Home Screen Layout
Regards. -
I have a 2nd iPhone, the same problem of missing Data in Notes Apps again. Please advise.
Did you purchase the music through the iTunes Store?
The apps you have purchased can be downloaded for free from the App Store.
http://support.apple.com/kb/HT2519 -
My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.
What are the settings for clearing history when Firefox closes?
Make sure that you do not clear the Browsing Cache as that will remove the thumbnails that are stored in it. -
HP PAVILON DV4 1428dx company installed OS is vista...Upgrade to windows 7 -32bits
I have been having troubles like BSOD, NETIO.sys and computer crashes evey 5minutes.
it is now stable without any problems and only the sound driver refuses to install.
Please advise how to update driver for W7 as it is not available on the HP site.Hi:
Did you try the Vista driver? Normally they work fine for W7.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69143-1&cc=us&dlc=en&lc=en&...=
Another thing you can try is to be connected to the internet. Click on the audio controller in the device manager. Click on the Driver tab. Click on Update Driver and select the automatic search.
Sometimes W7 will pull down a driver from the Windows Update site.
If the above 2 suggestions don't work, try this driver which seems to be the same as the Vista one, but for Windows 7.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-793...
Paul -
my iphone4 disconnecting calls after 3 rings and show these calls as "missed calls" while the person who calls me still hear a dial ring. this started to happend after i upgraded to ios 7.0.4 please advise
this is really frustrating since i cant pick up calls with only 3 rings and i always miss them
i tried to restore like 3-4 times, didnt help
even tried to set the iphone as a "new iphone" on itunes and it didnt helpGenerally, when going out of the country and using a foreign SIM, carrier files can be changed. Go to Settings>General>About>and look at Carrier? What does it say? You may have to perform a restore. You can try a restore from a backup, that would reinstall the iOS, and would provide the latest AT&T carrier file as well. See if this will fix the problem.
-
When I updated the new version IOS5 and used icloud, some of the apps are missing, how can i find those apps (but i was not using my account to download some apps before). Please advise.
They are free to iOS 7 users who have activated their NEW device on Sept 1 2013 or after. They are NOT automatically free with iOS 7.
AirDrop is only compatible with iPad 4th gen and iPad mini. iPad 3rd gen and below do contain the necessary hardware for AirDrop. Also, AirDrop is only compatible between iOS devices. You cannot AirDrop between iOS device and Mac OS. -
My iphone 4 photo/message auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. This function was working perfectly since day 1.
Please advise how to unlock it.Swipe upwards from the bottom of the screen to open Control Center. You will then find the orientation lock in the top row, last icon on the right. White is on, black is off. Tap and turn it off. If you see the lock symbol, then orientation lock is on, and that is what is keeping it in the portrait mode.
-
Audio Left Channel is absent in app-specific instance
Hi, All:
I was just advised that this topic belongs here in the MSDN forums, so moved the topic from the Community. I am not sure that this particular forum is the correct one. If not, please advise where to put this question.
Here is my original question:
I have created an application (in Delphi) which uses audio output, but recently discovered that the left channel is missing. There is nothing in my program that would do this.
To further test this application, I did the following:
1. Used the Windows PlaySound command to output a simple WAV file. I moved this line to the top most part of the program before anything else was created or intialized.
2. This wav plays immediately on launching the program, but as with the rest of the program (which using SAPI, text2speech), the left audio channel is absent.
3. If I move the program (profviewer.exe) to another location than where the application is installed, the left channel returns.
4. If I change the name of the program to e.g. "test.exe" the left channel returns.
5. On my Win7 systems, if I changed the name from "profviewer.exe" to "test.exe" then ran the application to the initial password dialog then cancelled, then rechanged the name from "test.exe" back to "profviewer.exe"
I discovered that this audio channel anomaly was corrected.
6. On my Win8.1 system, changing the name of the app as in #5 did not fix the audio channel problem.
My guess is that there is some application specific registry setting that controls this. Could you tell me where to look for this so I can fix those systems with Win8.1? Or failing that is there some other work around that I could apply to get the
left channel audio back?
Thank you,
Chuck BelangerHi, Matthew:
Here is the output of Meters.exe from a user with Win8.1 and who has no left audio channel in the program (Profviewer.exe). Hope this helps to fix this head scratching issue.
Chuck
-- Playback devices --
Realtek Digital Output (Realtek High Definition Audio)
Peak: 0
Mute: 0
Volume range: 0% to 100% (-96 dB to 0 dB in steps of 1.5 dB)
Master: 100% (0 dB)
Channel 1 of 2: 100% (0 dB)
Channel 2 of 2: 100% (0 dB)
Speakers (Realtek High Definition Audio)
Peak: 0.89008
Mute: 0
Volume range: 0% to 100% (-65.25 dB to 0 dB in steps of 0.03125 dB)
Master: 100% (0 dB)
Channel 1 of 2: 100% (0 dB)
Channel 2 of 2: 100% (0 dB)
Active session #1
Peak value: 0.35822
Icon path:
Display name:
Grouping parameter: {e82cafd7-7990-453b-945d-3ab7524368ea}
Process ID: 17284 (single-process)
Session identifier: {0.0.0.00000000}.{6b1b2275-77cc-4056-ad76-4c9fcc30e373}|\Device\HarddiskVolume5\Program Files (x86)\NMT\NMT Treeview Version 3.0\NMT Treeview Professional\ProfViewer.exe%b{00000000-0000-0000-0000-000000000000}
Session instance identifier: {0.0.0.00000000}.{6b1b2275-77cc-4056-ad76-4c9fcc30e373}|\Device\HarddiskVolume5\Program Files (x86)\NMT\NMT Treeview Version 3.0\NMT Treeview Professional\ProfViewer.exe%b{00000000-0000-0000-0000-000000000000}|1%b17284
System sounds session: no
HWND: 0x000E2560 Scan Text
HWND: 0x000D02A4 NMT TreeView - Professional Version->Client: test 1 test 1| Session: 2/14/2015 8:38:27 AM| Mode: CLIENTS
HWND: 0x001E111A
Master volume: 1 (0 dB FS)
Not muted
Channel #1 volume: 0 (-1.#INF dB FS)
Channel #2 volume: 1 (0 dB FS)
Audials Sound Capturing (Audials Sound Capturing)
Peak: 0
Mute: 0
Volume range: 0% to 100% (-96 dB to 0 dB in steps of 1.5 dB)
Master: 100% (0 dB)
Channel 1 of 2: 100% (0 dB)
Channel 2 of 2: 100% (0 dB)
-- Recording devices --
Microphone (Realtek High Definition Audio)
Peak: 0
Mute: 0
Volume range: 0% to 100% (-17.25 dB to 30 dB in steps of 0.03125 dB)
Master: 100% (30 dB)
Channel 1 of 2: 100% (30 dB)
Channel 2 of 2: 100% (30 dB) -
Dolby Advanced Audio Interface software missing HP Pavilion Ultrabook 14-b003sa
I updated my HP Pavilion Ultrabook 14-boo3sa to windows 8.1 a couple months ago and since then the dolby advanced audio interface software is missing. The speakers are working and sound fine but I just want the option of the equaliser again. I have looked at the drivers available online and the most upto date driver for audio for this laptop is an IDT audio driver from 2012 for windows 8. Is there a more upto date driver that has the interface software? or is it just a case that the software has been removed on the update due to compatability issues? It sounds like dolby advanced audio is still active there is just no interface available as before I updated to windows 8.1. Please help. Thank you.
Hi Lhawley91,
I understand you are having issues with the Dolby Advanced Audio Interface software missing HP Pavilion Ultrabook 14-b003sa. This package contains the driver that enables the IDT High-Definition (HD) Audio for Windows 8.1.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112631-1&cc=us&dlc=en&lc=en...
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.
Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise. -
I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
Please advise what should I do to fix this.First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
New Media Encoder Error: video and/or audio filters are missing...
My colleague reported this error popup window while using Adobe Media Encoder CC (up-to-date):
"video and/or audio filters are missing and the rendered output may not match the original"
I've been seeing similar errors the past few days. I can't remember if the wording was the same in the errors I saw, but the circumstances were the same.
I've never seen this popup error before the most recent CC update.
Some background info:
I queued up multiple Premiere Pro pproj files as usual from within Premiere
without rebooting or deleting any cache or temp files or anything, I start the queue
I have no special plugins installed in Premiere. Vanilla CC install.
Windows 7, 64-bit
This error doesn't tell me what audio/video filter(s) are missing. The output files, once I dismiss this warning, are perfect.
The major problem: It stops the queue dead in it's tracks. Sure, it might seem handy to stop and give you a warning, but when it's a false report and there's nothing wrong, it's killing us, because we queue up multiple files for encoding overnight, and we're not here to get the popups.
What is likely causing this? Is it a bug that this is appearing so frequently? Has anyone else experienced this besides my colleague and I?
Thanks!Update for anyone experiencing this issue:
We are still investigating the cause of the issue and would really like your help tracking it down. If you run in to it I would be happy to jump on the phone with you and preferably do a screenshare as well. If you want to run some tests for me, this is what may help us track it down:
0. Please make sure you are updated to the latest version of Premiere Pro and AME, which at this time are Premiere Pro 7.2.1 and AME 7.2.
1. Simplify the project. Create a copy of the project and eliminate anything in the project that isn't related to the sequence(s) you are exporting. Then run the encode again. If it still occurs, move to the next step. If it doesn't occur any more, repeat step one and only remove half of the unused items (sorry, this is giong to be a manual process). Rinse, repeat.
2. Open your sequence in Premiere and press Cmd/Ctrl + A to select all clips in your sequence. Right click and select Remove All Effects. Export again. No repro? Go to step 4. If it still repros, go to step 4.
3. Make all the media offline. Export again. No repro? Go to step 4. Repro? Go to step 5.
4. Send me a message with as much detail as possible. Even better would be if you could provide me a copy of your project file.
Your help in tracking this issue down is greatly appreciated. Thank you.
Maybe you are looking for
-
Searching a pdf document in order to find text parts formatted with a specific font
I have a document that I output as a pdf. Between the first and last version of this document, I've made some changes, one of those being replacing a font by another one. Alas, in the final pdf document, under "document properties", "fonts tab", I ca
-
Making pie chart in numbers for ipad
Hello I am just getting started with numbers on my ipad. I have 4 columns of data, the first is an ID number column and the other three are checkboxes. I would like to make a pie chart that show's the percentage of rows that have each of the three
-
User deletion in SRM 4.0
Hi Guys Can anyone suggest me how to delete large number of Users from the SRM system,i.e with Postion, BP, an SU01 data should be removed. As I dont have option for deletion of users from USERS_GEN trxn in SRM 4.0. Please help by suggesting me with
-
Ok, I'm sure this is a simple syntax error - can any of you see what I am missing? CREATE or REPLACE VIEW v_booksearch AS SELECT b.title, b.isbn_no, b.price, b.photo, a.au_lname, a.au_fname, c.type, d.quantity, FROM tbl_books_isbn b, tbl_author a, tb
-
Mi iphone 3g no reconoce mi apple ID
No se que hacer, no quiere abrir mi apple id y ya lo active y todo