Audio sync drift issues within Premiere Pro CS6, even with 48kHz project & source material?

Evening guys and Merry Christmas to those who follow the tradition. I'm currently doing a few last minute tweaks to a live dance show that I recently shot. The show featured music that was recorded in camera (via additional mic) from the speaker setup within the theatre. This was always intended as a guide track as the original music would then be synced in the edit to give a cleaner sound to the audio during the dance sequences. I have the original CD that the music was played from on the night, however when the files are imported into Premiere Pro (or even Audition), they sync for the first 10 seconds or so and then gradually drift out of sync as the track goes on.
My project is set to 48.000 audio, which was what the original footage was shot at, as well as the audio tracks being imported as 48.000 too. Now on paper there should not be any issues with this sync drift occuring right? I've even tried with 44.100 audio files and naturally they drift out of sync.
At a loss here really as I'm not sure where i'm going wrong. Can anyone shed any light on this situation please?
Thanks!

What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Similar Messages

Video Playback Issue in Premiere Pro CS6

I am editing a video with 2 video tracks on top of each other. When I scrub through the timeline or jusy hit play in the timeline the top layer of video scales to about 50% and plays on top of the layer below it. But it didn't do that 2 days ago. Any ideas on what could cause that? I have attached a screen capture of what it looks like while playing back. Any info would be greatly appreciated.
::Premiere Pro CS6 (v 6.0.5) and a Macbook Pro running OSX 10.9 on a SSD, and 8GB RAM::

They are both 1280x720 but they were shot on 2 different cameras. The thing that is killing me is that I have done this exact same camera setup and editing before without this issue. And it only scales the top layer video down while scrubbing or playing back (spacebar). When the playhead is still it pops back to normal.

Is Adobe Premiere Pro CS6 compatible with Yosemite?

I'm considering buying a copy of premiere pro cs6 as I prefer a copy that I can use forever without a subscription to CC and also be able to use without an internet connection as I am mostly without internet. I just recently updated my iMac to Yosemite. I'm curious if I can install a new copy of Premiere Pro cs6 onto Yosemite? Also, if not does Adobe plan to update Premiere Pro CS6 and keep it compatible with Apple's new OS releases? Or will they only be focusing on the CC apps?

It is unlikely that CS6 will get any updates. I beliee that has been answered/ advised by Adobe
Someone else may answer from experience if CS6 plays nicely with Yosemite

Right sequence and export settings in Premiere Pro CS6, video with still images

I am trying to run a video on my website (self hosted). This video, made with Premiere Pro CS6, consists of still images with different video effects.
This video is only 50 seconds, but when I transform this in the ogg, webm and mp4 format, I obtain file with large size and the quality is not good.
Could you please guide me to find out the right sequence and export settings in Premiere Pro CS6 to obtain a video for the best possible quality on the web?
A precise description of the settings would be awesome.
Thank you
Silvia

Make the export setting the resolution you want to use on the web.
Make the sequence settings accordantly to these export settings

AVI audio not heard in VLC & Premiere Pro CS6

Hi!
I have an avi and Premiere Pro doesn't allow me to import it. The avi's audio is G.723 ADPCM codec and Premiere and VLC don't get it - the audio can't be heard. The only program in which I can hear the audio is Media Player Classic.
When I converted the AVI to mp4 the video worked fine and imported to Premiere but the audio wasn't even part of the file. When I imported the mp4 file to Audition it didn't show me the audio file.
How can I fix it?
Thanks

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Adobe Premiere Pro CS6 crashes with not finding a capable play module on a windows desktop with a AMD Radeon R9 200 series board.

I installed Premiere Pro CS 6.0 on a brand new system.
Win 8.1,
i7 3.4 GHz on an Asus Sabertooth
16 Gig memory
AMD Radeon R9 290 Graphics Board with the latest drivers and Bios.
On starting Premiere I get the (as I noticed quite frequent appearing) error message that Premiere cannot find a capable play module and the suggestion to update my video drivers.
I tried everything I found in this forum or on the web:
Installed the latest drivers
Run the program as an administrator
Updated the Graphics board Bios
Updated Premiere CS6
Started Gpusniffer in CMD-mode to find out what board it found and added that to the cuda_supported_cards.txt in the Premiere directory.
All to no avail. The app will simply not start.
The Gpusniffers report states:
Loadlibrary “n” failed
Loadlibrary “n” failed
--- OpenGL Info ---
Vendor: ATI Technologies Inc.
Renderer: AMD Radeon R9 200 series
OpenGL Version: 4.4.13084 Compatability Profile Context 14.301.1001.0
GLSL Version 4.40
Monitors: 1
Monitor 0 properties –
Size: <0, 0, 1920 1080>
Mex texture size: 16384
Support non-power of two: 1
Shaders 444 :1
Shaders 422: 1
Shaders 420: 1
--- GPU Information Info –
Did not find any devices that support GPU computation.
As I invested a lot in the CS6 Master Collection I am not considering an update tot the CC version, also because the same problem occurs in that version too.
I would be much obliged if someone has an answer that truly will work. This problem costed me the best part of two days’ work and fouled up my workflow considerably.

==========
I tried to go into display settings and disable the Intel card. (this caused low resolution which is unexceptable)
==========
This makes me think it's using that graphics "card" ( probably built into mobo ? ...called 'onboard graphics ? )
This stuff gets tricky and sometimes the only way to make windows 'recognize' the pci graphics card is to actually take it out and boot, and then put it back in...
Then you get mssg " windows detected new hardware" and you install the drivers...
usually bios gives you choice of using onboard graphics or not ( but this too is wanky sometimes...sorry to say ...)
I recently ( this past year ) had a similar sort of situation but have a desktop, where its easy for me to take off side panel and pull the pci-e graphics card and boot, and get that horrible low res default screen...turn off, install card, reboot etc...
but anyway, it sounds to me like you're notebook is using that mobile graphics driver stuff and not the radeon. Somehow you've got to make it switch to that graphics card is maybe your solution.
sorry I dont have notebook but maybe someone else here does and can help more...
good luck.
ps..its always a weird fact of life...when things aren't working 'right' something has to get done fast....
edit:
I dont know how much you know about windows stuff, but after you disable that intel thing and get your low res screen.. you DID try to update the driver for that card using 'my computer / device manager ' right ??

Is Premiere Pro CS6 compatible with Windows 8? Adobe let me download a 7Z type file but I cant do anything with it.

I am trying install Premier Pro CS6 on Windows 8 so I can extract Adobe Encore. This is a little ridiculous. What do I do with this 7Z type file? I have tried downloading a 2nd party installer app but no luck.

adobe 7z files are paired (file 1 of 2 and file 2 of 2) with matching exe files. both should be placed in the same directory and the exe clicked (or double clicked).

Timecode video effect issue in Premiere Pro CS6?

Appears to be similar in description to the issue folks were having back in 5.5. Here's the details...
• New install, making the jump from FCP, first open of this PPCS6 install.
• Source footage brought in as DVCproHD 720p @ 60 fps. Imported into new bin and then onto timeline in sequence 1... works beautifully.
• New transparent video clip on track above footage, stretched to full production length. Applied video effect > timecode to transparent clip.
• I see the positioning crosshairs and darkened translucent box and the field indicator... but no rolling numbers, even after rendering.
Just need to make a TC burn of the footage and I've spent half a day trying to get the burn to work.
Any ideas?

Peter,
Thanks for your response, however, no avail, same issue. However, I think I may have found what this issue's root cause is... being a designer, I've far too many fonts installed (managed via Linotypes manager) with a conflict here and there, and I've had to use my customer's "helvetica" and other fonts on occasion. I activated a new account on my computer (nice and clean fonts & settings) fired up the same document in Premiere and BOOM rolling timecode appears. So with that solution in hand, my thought is somewhere I've damaged/lost the font in my base account that Premiere uses to generate timecode. I wish it was a setting I could change in the timecode video effect to choose what font is used... maybe you could pass that on to product development? Or do you know specifically what font it uses for the TC video effect?
Anyway, thanks for your reply... now I'm off to go see if I can fix the font issue in my base user account.
clint

Audio levels in exported video [Premiere Pro CS6]

The audio level is just what I want in the actual track. However, when I export the video the exported audio is too loud. So I went back and lowered the clip by 3dB...the volume level of exported video still didn't change--it sounds like people are shouting.
This is a new problem...is there a setting in the export dialog box I have accidentally changed?
Thanks in advance.

I have found this to be a problem in CC at one of the places I work.
Export at 16bit perfect levels with a tone ident...bring it back it into the project and now -3db.
I tried exporting 32bit float and it comes out 3db higher!
Only method I have found is to export audio separately to a 32bit file then in a new final video sequence, replace the audio timeline with this file and adjust levels. The new export seems to come out at the right levels
May have something to do with a bug in the pan law but you can't adjust settings like in Audition.
Many bugs in this program causing me nightmares....
....Can't save track preset effects and have to copy complicated track EQ and compression settings by hand
....Track effect settings adjustments that revert as soon as you click away or hit play
....Very slow with crashes and freezes in sequences with nested sequences.
Leave plenty of time for your final exports...you will need it

Asio Driver issue in Premiere Pro CC conflicting with all other media players on PC

Whenever I have Premiere or audition or After effects opened---- should I want to play a media clip on J River Media center, or Windows Media Player, the Asio driver is locked by the Adobe products, so the other media players do not have access to it. This may be a new windows 8.1 phenomenon, as i never had this before with 64 bit Windows 7.
I have had some success running the other media players on the lousey windows sound drivers, but they don't sound nearly as good as the Asio driver does, with its near zero latency.
My sound card is a Lynx aes 16, and the Win 8.1 PC pushes the digital audio out to my Berkely DAC , then to separate mono bloc amps, into Magnepan speakers as the reference audio system for my music and video editing....or for entertainment listening :-)
Does anyone have a solution that will force the Adobe CC software to release the Asio driver when I try to use J River Media center, or some other media player?

I had this problem this evening 090813 after upgrading my Adobe Cloud Desktop.
I open Pro CC and had the Dolby Audio Decode Licensing Restriction for (File name.......... ) Error
Previous CC progs loaded and worked with problem.
I uninstalled Pro CC - Restarted the computer - Re-installed Pro CC.
Now working with no problem.
Hope this helps.
John

Can I open and edit a Premiere Pro CS6 file with Premiere Pro CC 2014?

Can I bring a CS6 file to CC 2014 in Premiere? I know I can't move backwards, but can I move forward without any problems? Thank you!!

Hello Amanda and yairb999,
if you've identified what you think is a bug, submit a report through the form at
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform. (Feature Request/Bug Report Form >>> I quote: Welcome to the Feature Request and Bug Report Submission Form. Use this form to request new features or suggest modifications to existing features.). These reports submitted through that form go directly to the product team. Sometimes they get back in touch with you to verify the bug or try to find a solution to your problem.
Hans-Günter

Opening Premiere Pro CS6 Files with Premiere Pro CS 4

I am wondering how it may be possible to open PP CS 6 files with CS 4. There was an earlier listing to modify some code to change Version "25" to Version "24" for v5.5. What would the number be for Version 4, if that is the
solution, or is there another method. Thanks.

I think its a no show.
CS4 is way different from CS6. For starters CS4 is 32 bits.

FAQ: What are the best resources for Premiere Pro CS6?

Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
Premiere Pro CS6 troubleshooting articles
Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
Premiere Pro CS6 tutorials
Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

Premiere Pro CS6 and MXF Compatibility.

We have recently had a problem with audio dropping out during export using Premiere Pro CS6. This particular project file used a combination of footage from a Canon XH-A1 and a Canon XF305. It was created in CS5 (Not CS5.5) and was recently converted to a CS6 Project file. When we would export the sequence the video would have missing audio in several places.
We think it may be a compatibility issue with the MXF conatiner used by the XF305. I have seen other people mention issues they have encountered using a similar set up. Is this something that may be a an issue for us if we move forward using CS6 and the XF305 on all of our projects?
The problem was resolved by taking all the footage offline in CS6, deleting the render files, moving the cache folder and bringing everything back online.
We just want to make sure that everything is compatible like it should be and if not what kind of patches we could expect in the future? It would be preferable not to have to transcode our footage prior to importing into Premiere Pro.

I had this once too, and I "fixed" it by deleting the XMP files.
Ulf

Using Premiere Pro CS6, currently not able to capture video.

Using Premiere Pro CS6 along with Canopus ADVC100 as my capture device through a firewire port, but in the capture window, it only shows black. I've tried all different settings. I've always been able to capture in the past. I had the AOL Tech Gurus check my computer and all ports and everything is working properly. I've even switched out the firewire cable, as well as used a different ADVC100 and different firewire ports, though it still is not working. I did see video for a few seconds without sound, but it went away. When I do power up the ADVC, it immediately starts up Premiere Pro CS6, so my computer is recognizing the ADVC100. I'm wondering if something within my computer is conflicting with the capture.
- Arlen

Thanks cvid01 for jumping in -
Where would I see the ADVC100 as the Capture Device aside from the drop down window in Device Control where I can choose it to be the Device Control?
It's always worked with the Device Control Device showing "None". And the ADVC100 has always worked in the past with Premiere Pro CS6 for all my Captures.
Also, my Premiere Pro CS6 starts up once I power up the ADVC100. Though I have even closed the Premiere Pro CS6 after it opened up, and restarted the program.
Just wondering if the program itself has some sort of bug now in the capture window? Is there a Premiere Pro CS6 fix that will solve the issue?
Here is what my capture window shows:

Audio sync drift issues within Premiere Pro CS6, even with 48kHz project & source material?

Similar Messages

Maybe you are looking for