Audio sync is off by the end of recordings

Hello,
I have some recordings in .AVI format that were made earlier this year. The files were made using a Black Magic capture card, and their Media Express recording program.  These recordings are approximatly 2-3 hours in length.
I have discovered that although the audio is synchronized at the beginning of the recordings, it is off by as much as 1-2 seconds by the end of the recording.
Is there a way in Premiere Elements 8 to correct the audio so that it is properly synced over the entire recording?
Thank you!

Welcome to the forum.
Unfortunately, you have posted to the Tips & Tricks sub-forum, which is a repository for tips on how to do things in PrE. Our MOD, Steve, will probably move this out to the main forum, so that more users can see and respond.
Now, regarding the AVI's, that term is just a wrapper, and it's what's inside that really matters. This ARTICLE will give you some background.
It is likely that the BM CODEC is causing the sync drift. Dynamic OOS correction is a bit harder, than static OOS, but this ARTICLE will step you though the process.
Good luck,
Hunt

Similar Messages

  • Captivate 5: Audio is cut-off at the end of the published file

    Hi,
    I'm using Captivate 5. I published my projects to Flash 10 (SWF/HTM) format and the audio is always cut-off at the end. For example, if my last slide has this audio "Thank you for time and have a good day.", what you will hear is only "Thank you for your ti" or "Thank you for your time and have". This only happens on the published file. The audio is not cut-off when you preview the project.
    Here are additional observations:
    -> If I published with playback controls, the audio is cut-off the first time i view the output; however, the second time I view the output or if I drag the playhead, the audio is no longer cut-off. The timing of the elements (mouse, highlights, audio, etc.) is also way better when I view it the second time versus the first time.
    -> If I published without playback controls, the audio is always cut-off no matter how many times I view the flash file.
    -> I have tested publishing to Flash with different # of slides (10 slides, 50 slides, 100 slides) and the result is the same. So I don't think it has something to do with the number of slides.
    > Note also that the last slide has enough audio to match the slide's length. So I don't know why it's cut-off.
    Thank you in advance for your assistance.
    Regards,
    Rose

    Hi MagicBBB,
    A patch to address this issue is available. Check for updates from the application through Help >> Updates.
    Also have a look at the release notes here. http://kb2.adobe.com/cps/881/cpsid_88142.html
    Please try out the patch and let me know.
    Thanks,
    Ashwin Bharghav B
    Adobe Captivate Team

  • I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09.

    I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09 with all the availbable updates.

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Ipod shuffle switch off at the end of a playlist?

    Hi,
    I would like my ipod shuffle to automatically switch off at the end of a playlist (or after a certain time).
    Does anyone know if there is a solution to this? A firmware update or hack that solves this?
    Regards,
    - mg00se

    It's a simple player.  That's the way it works.
    If you can explain why (the situation when) you need your shuffle to play just one audio file, and then stop, maybe I (or someone else) can come up with a workaround to achieve what you need.

  • My itunes is cutting off at the end of some of my songs?

    My itues is cutting off at the end of some songs?  It did not do this before...Also, it will play in my dock or receiver but not in any cars?

    Hi David,
    Thanks for the response. I did look at the song that got cut off and it's a .m4a file. However, I also have normal audio that comes from an external Zoom recorder in .wav format that is getting cut off in the same way. The strange thing is I've never had a problem with this before a couple weeks ago. I've used this same song before and my external audio is always in .wav format

  • I got a text saying that if I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my accoun

    I got a text saying that I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my service from being cut off?

    As it was pointed out making prior arrangements could of helped extend the time you need to get your account back in order..
    But if you have to have the phone and its the only thing you have to make calls, I would try other means ( Family, Friends, or other )  to get the rest of the balance payed and you can pay at a Corporate store using the stores Kiosk machine.!   You can pay with Cash, Credit or I think with a  check  but using a check I'd ask the Local store how the policy is on that..
    Hope that Helps.!  Good luck..

  • TS1424 When downloading an album from itunes one song did not download properly and is cut off at the end, how to fix?

    Downloaded John Mayer album bur one song is cut off at the end, how to fix??

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that song from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link.

  • TS1424 songs are not complete get cut off at the end

    I downloaded this album but some of the songs are not complete they get cut off at the end what can i do?

    If you are in a country where re-downloading is possible (iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085), delete the track and download again (Downloading [using iOS or computer] past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519).  See tips on downloading in https://discussions.apple.com/message/19097773
    If you cannot download a second time, contact iTunes Store support staff through the report a problem links in your account history or,
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • A downloaded song cuts off at the end - how can i get the full song

    I recently downloaded a new song, but the song cuts off at the end.  How can I get the full song?

    Try update your iTunes to the latest 10.6.3 version and see if it rectifies the issue.

  • HT4914 Some songs are cut off before the end of the song..anyone know why??

    I Find that random songs on my iPod are cut off before the end of the song - don't know why

    Delete it, click here, and follow the instructions.
    (100979)

  • Audio problem: large avi file / audio out of sync getting worse towards the end

    Hi,
    We have an 11 hours avi file (about 500GB) that plays fine in Windows Media Player and is in sync.
    When we import it into Premiere Pro CS6 audio and video tracks are of the same length. At the beginning of the video sound is fine and in sync as well. But at the end of the video the audio is out of sync by a couple of frames (but still the same length). We tried different things and the only thing that worked was setting the audio buffer size to maximum. Now the audio is in sync at the beginning, middle and end of video. But of course editing is impossible like this (if you hit pause the audio needs some time to stop).
    Any help or suggestions are welcome.
    Cheers

    AVI is a wrapper... what is inside YOUR wrapper?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Also, When your project sequence is correct, you will not see a red line over your timeline at first import, before you do anything to the video
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video
    The NEW ITEM process will ensure that your sequence matches your video file
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn about the NEW ITEM process
    Now that you have your video DETAILS available, check to see if you have a video file with a Variable FRAME Rate
    IF YES, you will most likely need to find a program to convert to a CONSTANT Frame Rate to edit in Premiere Elements

  • Audio cutting off at the end of audio clips w no change in waveform?

    Audio cuts off right at the end of some of my clips... I can still see the waveforms that have the full audio on them, but no audio plays for those last two or three seconds! My audio level is the same throughout the clip, so its not like its fading out or anything. This has been happeneing for a few weeks now, in multiple seperate projects.

    Hi David,
    Thanks for the response. I did look at the song that got cut off and it's a .m4a file. However, I also have normal audio that comes from an external Zoom recorder in .wav format that is getting cut off in the same way. The strange thing is I've never had a problem with this before a couple weeks ago. I've used this same song before and my external audio is always in .wav format

  • Songs cut off at the end

    Hi,
    My Ipod nano has started cutting off the last 30 seconds or so of songs. Any suggestions on how to fix this?
    Thanks!
    Nano 1GB   Windows XP  

    It's done in iTunes when the iPod is hooked up.
    From the iTunes menu, choose Preferences (Windows: From the Edit menu, choose Preferences), then click the Audio button at the top of the window.
    To hear songs fade in and out, select Crossfade Playback.
    To decrease or increase the amount of time it takes for the current song to fade out at the end and the new song to fade in, drag the "seconds" slider left or right.
    Although one older article says that iPod does not support crossfade playback, when I first got my 2nd gen nano it was having the problem with the next song starting before the first one was done. I decreased the crossfade slider to zero and re-synced songs to my iPod and everything was fixed.
    I'm not sure if this is your issue but it won't hurt to try.

  • Video and audio sync is off

    I have a video that was captured using the Hauppauge Win-TV 950Q and the Win TV software package. The file plays just fine in WinTV or using the Windows Media Player, but the timing of the audio and video seem to slip if I import it into Premiere Elements. I am using version 10, so I don't know if this is something that was fixed in a newer version. Over the course of an hour, the audio goes from off by about a second at the beginning to being something on the order of eight seconds behind at the end of an hour. Anyone know how to fix this?
    Thanks
    -Bob

    thanks for looking! If I knew the answers to all your questions, I probably would know what's wrong and how to fix it. I am not looking to do anything exciting here, just trying to archive a program to a playable DVD. Well - I have it playable, it's just not watchable unless you can deal with badly synced audio.
    Loaded up mediainfo and it says the frame rate is 29.97, but a variable bit rate for video and constant audio.
    I will look into handbrake.
    Oh - and Win 7 OS...
    It's probably more than necessary - but here's the text output:
    General
    ID                                       : 0 (0x0)
    Complete name                            : C:\Users\Public\Videos\S-Video_20141020_1928.ts
    Format                                   : MPEG-TS
    File size                                : 3.00 GiB
    Duration                                 : 55mn 32s
    Overall bit rate mode                    : Variable
    Overall bit rate                         : 7 740 Kbps
    Video
    ID                                       : 1001 (0x3E9)
    Menu ID                                  : 1 (0x1)
    Format                                   : MPEG Video
    Format version                           : Version 2
    Format profile                           : Main@Main
    Format settings, BVOP                    : Yes
    Format settings, Matrix                  : Default
    Format settings, GOP                     : M=3, N=12
    Codec ID                                 : 2
    Duration                                 : 55mn 32s
    Bit rate mode                            : Variable
    Bit rate                                 : 7 163 Kbps
    Maximum bit rate                         : 8 500 Kbps
    Width                                    : 720 pixels
    Height                                   : 480 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 29.970 fps
    Standard                                 : NTSC
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Interlaced
    Scan order                               : Top Field First
    Compression mode                         : Lossy
    Bits/(Pixel*Frame)                       : 0.692
    Time code of first frame                 : 02:17:15:16
    Time code source                         : Group of pictures header
    Stream size                              : 2.78 GiB (93%)
    Audio
    ID                                       : 1002 (0x3EA)
    Menu ID                                  : 1 (0x1)
    Format                                   : MPEG Audio
    Format version                           : Version 1
    Format profile                           : Layer 2
    Codec ID                                 : 4
    Duration                                 : 55mn 32s
    Bit rate mode                            : Constant
    Bit rate                                 : 192 Kbps
    Channel(s)                               : 2 channels
    Sampling rate                            : 48.0 KHz
    Compression mode                         : Lossy
    Delay relative to video                  : -297ms
    Stream size                              : 76.3 MiB (2%)
    Menu
    ID                                       : 1000 (0x3E8)
    Menu ID                                  : 1 (0x1)
    Duration                                 : 55mn 32s
    List                                     : 1001 (0x3E9) (MPEG Video) / 1002 (0x3EA) (MPEG Audio) / 1003 (0x3EB) ()

  • Video Files being Cut Off at the End in CC

    So I've been using Premiere Pro for awhile now, and recently upgraded to CC. I record a number of different things that I post onto YouTube - vlogs, video gameplay, and web-based tutorials. My vlogs are still file, and my video gameplay recordings also seem fine, but I'm having an issue with my web-based tutorials now.
    For both the video game and tutorials I use a program called Fraps to capture my screen + audio commentary. Fraps generates AVI files, and I have it set to chop the recording into 4GB sections (basically every time a file hits around 4GB, it saves it and starts a new file). For some reason the final recording in my tutorials is missing the last 10 - 20 seconds when I bring it into Premiere Pro CC. This is not happening to my gaming footage, and when I play the tutorial footage outside of Premiere Pro, the missing footage is there.
    I can't imagine the problem being Fraps because:
    Before upgrading to CC I never had this issue
    The AVI files from Fraps are fine when played outside of Premiere Pro CC
    Has anyone else experience this and is there any known solution/work around (other than just recording an additional 20-30 second buffer at the end of all my tutorials to compensate)?

    I have just encountered this problem myself and found it to be a problem with recording from Fraps at 30 FPS, i tried at first recording the file playing in WMP with Fraps again at 30 FPS and imported a 30 second clip in to end up with only 4 seconds once in premiere. I then tried recording the video's end in WMP at 60 FPS and it seems fine, it is not clipping the duration down at all and so all i need to do is just edit the gaps in between. So i guess for now just record everything at 60 FPS which i assume you largely do anyway for game videos but even your non-game stuff, record it at 60 FPS until whatever the problem is, is solved. If you have any clips need to fix in the mean time, just do as i did and watch them in a video player in full screen and record with the Fraps input sound turned off, then edit the clip in. hope it helps!
    Edit : One thing i did try, which might be worth you having a go of just to see if it is the same for you is, try putting one of your problem files into windows live movie maker, i did this and the duration was fine, but the audio was cut exactly where Premier was cutting the whole clip. So it is possible it is not directly a Premiere problem.

Maybe you are looking for

  • Cover flow missing

    I have installed itunes on my laptop but there is no cover flow option, none at all, just the old style version of viewing, I have downloaded latest version

  • Issue regarding transaction f-28

    Hi : When I am going to do maunally post incoming payment,and I had input the amount  and account,and everything looks good and it had been balance,and I am trying to post but the system said account determination not defined for trans.ZDI in chart o

  • Alternative for session variable in OBIEE Translation

    Hi all, I am working on translating OBIEE reports to various languages. I am using specific xmls for particular language which has entries for translated text. Now in few of the reports I have case statements/BINs defined in column formula. This 'col

  • Change Ship to Party on outbound delivery

    Hi Our customer has a specific requirement changing the ship to party on outbound delivery when it is created (VL01N). The requirement is trading partner order the goods for example 100 qty. When the goods are ready for delivery he will inform to del

  • Hi, how can i choose road category (toll road/highway/country road) in maps application?

    hi, I want to use my IPAD2 4G+wifi for navigation purposes in Europe. How can I choose the roads to avoid tolls or highways in the standard maps application available on the IPAD?