Audio Sync Issue With FLME 3.1 and BMIP Card

Hello Folks....First off..Happy Holidays to all.  Secondly...have Black Magic Intensity Pro Card (PCI-e) installed on i7, 3.33GHZ, 24 Gig Ram, Raid Controller  2x 600GIG Drives, Win7 64bit etc etc.
Noticed today on a live show...we had an audio sync issue of half to full second.  This was being pushed via FLME 3.1 and audio was married to the BMIP audio inputs.
Video input was Component and audio as analog.
Any thoughts why this would happen?
Bandwidth was more than acceptable (pushing 700kbps over a T1)
Appreciate any insight.
Thanks,
KC

Hi!
I am having the same issue with the HD Extreme card. Did any of you find a solution to the problem?
Best regards
Jan

Similar Messages

  • Playback pauses and audio sync issues with live video stream

    I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player.  It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams.  It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
    The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
    I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux.  I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
    To see the stream with the Akamai player, go to:  http://live.kulabyte.com
    To see the stream with the OSMF/Strobe player, go to:  http://live.kulabyte.com/osmf
    I do not have JW set up for public viewing yet, but the two above show the distinct difference.
    We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
    If someone has ideas on debugging I can PM the actual video assets to you.
    Thanks,
    Tim

    Hi Tim,
    You need to add this setting:
    dynamicStreamBufferTime=8
    The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
    I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
    Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
    https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
    Looking forward to your confirmation that this solved your issue.
    -Andrian

  • Severe audio sync issues with DVR and RAI(Italian) channel.

    Having severe audio sync issues with the Motorola QIP6416-2 while
    watching RAI(Italian) channel. The audio is about 2 seconds behind
    the video. This is the only channel it seems to happen with.
    I just switched from Cablevision about a week ago and never had a
    sync issue with their DVR with the same RAI channel or any channel.
    I've tried changing hdmi cables with no success and I also went to
    component video cables but the problem remains. Resetting the
    box helps but within 15 minutes the sync issues return. Also,
    a channel change and back helps briefly,
    The only new piece of equipment in the mix is the Motorola DVR,
    nothing else has changed.  The DVR is connected directly to my
    tv.
    Any help is greatly appreciated.
    Mike

    Being a foreign channel, there may be something screwy with the framerate (PAL conversion?). I don't personally subscribe to any foreign languages channels and I doubt too many on this forum do either, so you may have trouble finding someone to replicate the problem on their end here.

  • Canon cameras have audio sync issue with FCP?

    My mini dv deck died on me so,
    I am using a small palm size Canon mini dv firewire camera to transfer about 50 tapes.
    I am having a weird audio sync issue.
    Sometimes the capture footage plays down in sync - I pause>scroll>play - and it's suddenly out of sync. This keeps happening. Sometimes it plays in sync. Other times it does not.
    Because it's hit and miss- I'm not sure I can even re-sync.
    I imagine it could be the media drive (internal)- but I have other video files on this drive that play fine.
    I don't often use firewire capture.
    Is audio sync a common firewire issue?
    Will the quality suffer if I capture through composite/analog audio outputs?
    I can patch it through my
    decklink card.

    Audio sync is an issue with Firewire, just not all the time. Usually it is fine, but a lot of Avid people don't like Firewire for this reason.
    Most often it is a 5 frame sync issue. Slip your audio 5 frames forward and see if that solves the problem.
    As well, take a look in your Browser after you capture a clip and see if the Aud Rate is either 48,000.5 Hz or 47,999 Hz. I have seen the clips come in as both of these. Once you slip the footage, export the audio only, then reimport and attach the audio to the clip in the timeline. Should take care of it.
    Post back if these don't work.

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • I have been having syncing issues with icloud notes, contacts, and now icloud email. Does anyone have suggestions?

    Just recently, I have been unable to receive icloud email on my iphone and new ipad3. Although, I am a loyal apple consumer, I feel a bit let down. I am a PhD student and used my ipad/icloud email for downloading  and reading PDF journal  articles. My goal is to eventally buy a MacBook Pro and eliminate some of the syncing issues with icloud by storing my documents on the hard drive. I hope this will give me some relief from all the trouble I have had with icloud. Please share your suggestions.

    Right now, there is an iCloud blackout.  Most people are having issues syncing Notes, Calenders, and Contacts between devices, emails aren't being sent, and Find My iPhone isn't working.

  • Premiere Pro audio sync issues with 48khz audio on video file and 44.1khz audio on external audio

    So, I recorded video and audio on my Canon 5D Mark II at 1080p, 23.976 fps, and 48khz, 16-bit Stereo audio. And I used a Zoom H4 to record an mp3 audio file at 44.1khz Compressed. When trying to sync the audio in Premiere Pro CC, the audio slowly loses sync over time. I already tried to convert the 44.1khz mp3 file to 48khz in Adobe Audition. But that didn't fix the problem. Any ideas?

    There's always time-stretch changes to the audio file with "keep pitch unchanged" checked, I suppose. Mind you, I've heard of people doing it but haven't done it myself. There's other possible options I'm sure. There's been quite a few threads here on time-sync issues over time.

  • Audio sync issues with apple tv

    Hi All,
    I am having some issues with audio syncing properly on my apple tv.  I have my movies stored on an external hard drive - movies go through itunes through to my apple tv (as it should be) via home sharing.  Anyways, some of the movies seem to be out of sync when I watch them on my tv, but when I play them through itunes on my computer they are just fine.  I've tried taking the movie out of itunes and even renaming it before i bring it back in - but that doesn't solve the issue.  Any ideas?  Any help would be greatly appreciated.  Thanks!
    Stacey

    I just encountered this issue also. All my digital movies and dvd rips stream fine through itunes and into my apple tv. However I just imported a movie I made in imovie. The movie plays fine in quicktime or directly in itunes. When I play the movie on my apple tv streaming it from the same itunes account, the audio is out of sync.
    Any help is really apprecieated!
    D

  • Audio sync issues with variable frame rates as well as .ts files

    I'm using Premiere Pro CS6 and CC, in Windows 8.
    I bought an AverMedia Live Gamer HD card to capture 1080p footage with, and the the videos it produces work perfectly during playback. No sync issues whatsoever. I'm saving them as MP4 at 30fps.
    The problem is when I import them into Premiere Pro, the audio loses sync at certain points. After a bit of digging, I've discovered that the videos have a variable frame rate, which Premiere Pro does not support. I don't know why, considering competing products that are significantly cheaper can handle them with a problem, but oh well. The capture card can also save videos in .TS format, which produces a constant frame rate, however when I import them into Premire Pro the sync is immediately off by a second or more. I assume this is for an entirely different reason. Again, they play back normally without a problem. Upon emailing AverMedia, I was told this was Adobe's problem and there was nothing they could do about it.
    What I'm wondering is if there is any sort of realistic solution to this as of now. Is there any way that Premiere can work properly with files that have a variable frame rate? If not, is this being worked on?
    Or maybe there's a way to get the .TS files back in sync, that way the variable frame rate issue doesn't matter anyway.
    Converting the files is not a long term solution. I'm working with hours and hours of HD video, and it would take way too much time to do this.
    Manually resyncing the audio is also not a solution. Again, this would just be way too much wasted time with each project.
    The only solution I see as of now is to switch to Sony Vegas until this problem is resolved in Premiere, if it ever is. I'm really hoping there is some other way, so if anyone has an idea as to how to fix this, I'd really appreciate it.
    Thank you.
    tl/dr:
    Is there any way to get around Premiere Pro not working with variable framerates? My .TS files are also out of sync, is there any way to fix that? Without converting or manually resyncing.

    >If not, is this being worked on?
    Discussed many times before... never a "yes" answer to your question... tell Adobe what YOU want at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    If enough people make a request, Adobe MAY add the feature (I don't work for Adobe, so no guarantee of anything)

  • Final Cut 7 audio sync issue with external audio

    Ok, I've seached around a lot and still haven't found the solution for this common issue, which is sync between video and audio wich were recorded in two different devices.
    My video is from a conference (a lady speaking all the time) ProRess 29.97 and my audio is wav recorded at 44.1 Khz. I have already converted my external audio to a fine AIFF 48 Khz, and I have already re-imported it with the correct 29.97 easy setup, as it shows on this video www.youtube.com/watch?v=Nt-nfelM8KA. That helped a lot but audio still goes out on sync when playback goes further (not that much, but it shows).
    On Premiere Pro, that wav file a correctly in sync, and I have had this issue before with FCP and now it has come back! help!
    Anyone found a real solution for this issue?

    Why not just use Premier? FCP is going to slowly die out anyways....
    Anyhow, a work around... using the speed change tool (sss) adjust the audio to be the same length of the video so it is in sync... Press command-J, make note of the percentage you sped up your audio. Now open your audio in STP, select all of your audio go to Process>Timestretch and adjust the audio and apply the same percentage.
    Listen to your audio. STP's time stretch is excellent because it adjusts the speed without changing the pitch.
    Save as, re-import your audio.

  • Audio Syncing Issue with iMovie 10.0.1

    As was the case with iMovie 9, there is an issue with the audio syncing properly to the video when uploaded to YouTube. I am wondering if anyone knows of the workaround for the same issue with iMovie 10 (Mavericks)?
    Thanks!

    The bar codes are generated from an online service and are downloaded as vector art in the form of EPS files.I am opening the file in Illustrator after downloading the EPS file. I am not scaling it in any way, it just opens in Illustrator "wrong". "Placing" the file creates the same distorted effect. The EPS file looks fine if I view it in Preview or open it in Photoshop, but I need to use it as vector art.

  • Sync issues with Windows I tunes and ipd touch

    HI
    I am having some issues with transferring music to my ipod touch, the music is clearly displayed in I tunes, and I use the correct way to move the folder into the Ipod icon.......sometimes it works absolutely fine, and then I try another album and it just wont  transfer.
    I was wondering if there were any issues about which you connect first iTunes or Ipod first ?  that might make a difference..however which ever way I do it my Ipod is always recognized by I tunes straight away.
    could there be issue with the non official apple cable I am using.?.i don't see why as it will copy across other albums absolutely fine and charges up my idpod quickly
    I have also checked in the folders to see if there are any strange goings on with music tracks that might stop them from transferring across... but all of them are named correctly and in the MP3 format
    the albums that will not transfer do not appear to me to be in any way different to the albums that will transfer.
    any advice would be appreciated as it is quite frustrating not to be able to copy all the albums that I want to over to my Ipod touch
    Thanks
    Stu

    The message indicated the iPhone is synced with another library.  Syncing with this computer/library will wipe the contents from the device.
    Have you recently changed computers? Is this the same computer the device is always synced with? 

  • Audio sync issues with H.264 / MP4

    Hi,
    If I render out a guide video as a .mp4 it doesn't play quite in sync with the audio in Audition (CS6 with ASIO). It looks to be a few frames out. I'll try rendering a video with a 2-pop and work out how precisely many, but has anyone else experienced this? Should I be using a different codec?
    There's various ways to reproduce this, but this is the simplest:
    - Render a MP4 in PPro (Profile 4.1; 6Mbps/8Mbps Max) with audio
    - Import .mp4 into Audition
    - Place audio an video onto tracks
    - Video playback is out!
    Sam

    I filed a bug report and got this fix back from the audition team:
    First, in Audition go into Preferences > Media & Disk Cache and put a check next to "Enable DLMS format support"
    Then, open the MP4 file you created, only make sure to change the "Enable:" dropdown at the bottom of the Open dialog from "All Supported Media" to "MPEG Movie"
    And let me know if you see the problem.
    By default, Audition CS6 used Quicktime to import mp4 video files where Premiere used its own Dynamic Link Media Server (DLMS) importer.  Audition CS6 can use DLMS, but due to a slightly slower startup time, we did not enable it by default.  Enabling this and forcing the import through the DLMS MPEG importer, rather than the Quicktime importer, SHOULD display the video properly.
    In effect, we determined this was a problem in Quicktime before and there was little we could do.  Fortunately, with our next release we enable DLMS by default and will not require Quicktime support.

  • Audio Sync Issues with Long Clip

    I am about to start editing a multi-cam concert shot on 5 DVX100 cameras without Jam sync TC.
    In the past i have had issues with sync when digitizing long clips. is this still the case with FCP? Can i safely digitize 45-60min clips?
    I am using a Pro-sumer Panasonic MiniDV Deck for capture. (it is on FCP's 'suppported devices' list)
    on the avid i would digitize full tapes to make the Grouping (Multi-clipping) much faster. I want to avoid capturing a bunch of small clips on FCP and then sync them individually.
    any info is greatly appreciated.
    best
    Mustafa
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  
    Dual G4 Tower, 500g ATA internal, bunch o' Firwire 400 Drives; PowerBook Titanium 1GigProc/1GRam   Mac OS X (10.4.7)  

    DEAD ON THE MONEY. And yes, you can do it with the HVX. This is a really cool thing. There is a gotcha-- the dvx and hvx have an internal battery that allows for the retention of things like timecode when the camera is off. You gotta be sure that battery is charged. And the way you charge it is to attach the ac adaptor and plug it into the wall with the camera off for an hour or two.
    Once all the cameras are running with freerun code, you can swap batteries etc and the code just keeps going.
    Another thing- when you set up your camera pile, you've got to stand a couple of feet in front of the pile when you hit the remote so that the signal gets to all the cameras.

  • Audio sync issues with adobe flash media live encoder stream

    Using Adobe Flash Media Live Encoder to produce a 24/7 streaming network through Brightcove platform.  No matter what I do or how I configure audio and video, there is ALWAYS an audio sync problem that developes.  HELP??

    Moving this discussion to the Flash Media Live Encoder forum.

Maybe you are looking for