Audio Sync Issues Final Cut Express 3.0

I'm running an older version of FCE 3.0 I am having sync issues (audio slower than the video) when importing from my camera (small Panasonic handycam).
Does anyone have a solution?
thanks

Sync problems are often caused by using the wrong Easy Setup.
Cameras can shoot audio in either 12bit or 16bit mode.
The standard Easy Setup of "DV - PAL" (or NTSC) is for 16bit audio.
If you shoot 12bit audio your easy setup must contain "32kHz".

Similar Messages

How to add audio track to Final Cut Express

Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

Video out of sync in Final Cut Express... but in sync everywhere else!

'm working on making one video that is composed of two camera angles of the same thing. So, I have two video tracks in Final Cut Express, one for the side view, and one for the main view. Both videos are Quicktime Movies (.mov extension).
Here are the file details:
Main Cam: duration - 1hr 26min 46sec // file size - 5.74gb
Side Cam: duration - 1hr 29min 18sec // file size - 5.63gb
[the side cam video is a little longer because I started filming with that camera a little bit before the main cam and stopped the filming a little earlier]
Now, here's the problem. Both videos are in my Final Cut Express project. The Main Cam video runs fine. But the Side Cam video's video is out of sync with the audio by a lot (somewhere between 2 and 6 full seconds). Normally I would think that something had happened during the filming, but here's the odd thing: the Side Cam video plays perfectly in sync out of Final Cut Express.
If I open it in Quicktime, or even in iMovie, the audio and video are perfectly in sync for the entirely of the video. But when I import it into FCE and watch it there, whether it's in the timeline, in the viewer, rendered, or unrendered (I've tried them all), it's horribly out of sync.
So, the video plays fine and in sync everwhere except for in the Final Cut Express program. The Main Cam video, which has a very similar duration and file size and which is the same file type, plays perfectly even in FCE. The only problem is the Side Cam, and I can't figure out why this is, or how to fix it.
Another thing: these videos were not captured from a camera into Final Cut. I already have the video files on the computer, and as I've said, the audio is fine there. To get them into FCE, I use file -> import.
Also, if anyone has suggestions on how to fix this, could you provide directions of some sort? I'm fairly new to Final Cut.
Any advice would be greatly, greatly appreciated.
Thank you so much in advance!

Hi(Bonjour)!
Does both camcorders was set to 16-48 khz audio?
One way to synch audio that drifting from video (or from anoter audio lenght) is to set precisely 2 markers (one near the beginning, another near the end) in the correct lenght video track. Try to find spots where you can hear and see a common reference. The result of the workaround will put a corrected audios between those points only.
Now note the duration between those 2 markers in video track.
*Unlink the video/audio clip with the wrong duration.*
Select the drifting audio and put the 2 markers at the intended reference points.
The duration should be less or more than the video.
Use the blade tool to cut the wrong lenght audio at markers.
The tips is to set a new duration for this portion with the set speed command.
With this +new duration+, align the in point of audio with the first video marker. The out point of audio should be aligned with the second video marker.
Now the audio should match the video lenght and should be in synch.
Michel Boissonneault

Audio transitions in Final Cut Express--Not Allowing

I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

Audio problems in Final Cut Express

I have edited 4 sequences successfully within a project. Everything was working fine audio and video. All material is saved to my external scratch disk. I left the project to take a break (saving it first of course). When I came back the audio is not working. I have not changed any settings and have tried to obvious like checking the volume on the computer. I know the audio is still there because the levels are moving and correct. I just can't hear it. This is the second or third time this is happened?
At one point I needed to capture some material and following capture it seemed to work again. Then I lost it again. I thought I would try capturing more material to see if I would have the same luck but not this time.
I am fairly new to editing and to Final Cut Express. Any help would be greatly appreciated.
Thanks

http://www.fcpbook.com/Audio2.html

Field encoding issue/ FINAL CUT EXPRESS

Hello, I am editing a video for television broadcast. The requirements ask for "Field Encoding Order:Bottom or Upper field first. We do not accept progressive."
Does any one know how to do this for FINAL CUT EXPRESS? Or do I need compressor?

What is your source material?
What is your Easy Setup (actually, your Sequence Setting)? Control-click the Sequence name in the FCE Browser, then select Item Properties. What does it say for Compressor, Vid Rate, Frame Size & Field Dominance?
The request indicates they want interlaced material. Unless you know you shot progressive, you probably already have interlaced video.

Audio playback in Final Cut Express 4

Captured some clips and started a sequence all was fine. rebooted the software to get around an issue where it wouldnt let me drop any transitions in which is now fine. Now however im not getting any audio playback even though i can see the audio on the VUs. Now in system setting i Audio capture in the scratch disc section is not highlighted.. This is doing my head in cant find away around it. Please help..

Ignore the greyed out "Audio Capture".
It has always been like that and you can't alter it from the scratch disk you have set for the video.

Audio Problems with Final Cut Express

I exported a video to wmv format and when I play it back I have a problem with the audio at the end. At the end the sound seems to go into a loop and the the last words are repeated 3 times with a static sound. It plays fine on my MAC the problem only happens on a PC. The audio file was imported as a wma.

FCE does not export WMV without third party support. You should contact whoever produced the WMV export module.

Export edited audio track in Final Cut Express

Does anyone know how to export an edited audio track as a mp3 without it being a video file using FCE?

Use Export>QuickTime Movie and change the export function to audio only. Take that to iTunes and use it to convert to MP3.

Making a Live Music Video with Final Cut Express

I'm trying to make a music video for my band. We have filmed 1 of our performances using 3 video cameras. Is there a way I can sync on Final Cut Express 4 all the 3 videos with the music I have also recorded, so that I can see and choose out of the 3 what's the best at any given time?
Any help appreciated!
Many thanks,
Max

This is actually a feature of FCPro. FCE was not designed to do this, however there is a workaround.
First, place each video on its own video track. Then adjust the positioning of each video track relative to the audio so all the video tracks are in sync with it and, by extension, with each other.
Then you have to resize & move each video in the Canvas so you can see all 3 of them at the same time in the Canvas window. You can do this by opening each video in the Canvas, turn on Image+WireFrame and then resize & move each video as desired. This is much easier if you just use Piero's free QuarterPIP plugin instead of doing it manually.
Now you should be able to play the timeline and see all 3 videos in the Canvas, sync'd to the audio. From there you can pick & choose where to cut from one video to another. Just keep in mind that video on higher tracks will obscure video on lower tracks, so you will have to actually cut out portions of your video on tracks v2, v3 etc that you don't want to use. When you are finished, undo the QuarterPIP filter (or the manual resizings you originally did) and you should have your finished video.

Audio De-Sync during Capture in Final Cut Express

Hi, I use Final Cut Express HD and have recently come across an unusual problem. When capturing footage I find that around five minutes in or so the video freezes for a few moments. After the footage has been captured the audio now goes out of sync at the point the video froze, lasting for the remainder of the clip. I've tried different settings in the easy setup but the problem persists. I only got this new mac recently and the problem happened right after I installed it.
The only changes I have made to the set up was that I moved the folder that all of the footage/renders etc. to another part of the mac, which cFinal cut made me reassign in it's menus. Could this be the cause?
I do a lot of work in Final Cut and this is a large problem for me. Any help at all would be greatly appreciated.

If you have been altering the Easy Setups a lot you may have corrupted the preferences.
So trash them completely like this
Misc1 Trash Prefs
Then set the correct Easy Setup.
If you are not sure which to use let us know exactly what video format you are using.

Final Cut Express issues: Video and no audio

Ok.. sorry about before. I posted in someone elses message, for that I'm sorry.
My name is Justin Smith. I'm a freelance videographer out in Kansas. I have a brand new Macbook Pro. I'm shooting with a Dvx-100. I took my camera and tried to import video into Final Cut Express. When the short video clip was finished capturing, I tried putting it to the timeline, but only the video was added. So I have video, no audio and a bunch of questions. How do I get my orginal audio from the tape onto the timeline? Also, I have a question about importing audio from say Itunes. I can import the song fine, But when I lay the track down on the timeline, I'm getting a continuous beep noise. I read the FAQ and it told me I have to convert the track to AIFF? How do I do this?

As for importing audio from iTunes, yes, you must convert it to AIFF first. iTunes can do this unless you purchased the songs from the iTunes Music Store. If you did, they are protected AAC files and won't convert. There are ways to do it but since it most likely violates the copyright, no one on this forum can legally tell you how to do it.
If they are not protected, then go to iTunes preferences, select the Advanced icon at the top and click the Importing tab. Select AIFF encoder from the "Import Using" popup menu and make sure the settings are 48khz. Then select the song from the library and choose (from the menu bar) Advanced->Convert Selection To AIFF. A new music file in AIFF format will appear in your library.
Another way is to use Quicktime Pro (the paid version of Quicktime). Open the music file in Quicktime, choose Export and select AIFF, 48Khz, 16bit for the format. Again, this won't work if its an iTunes protected file.

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Final Cut Express won't capture audio with the video anymore, why?

I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

Final Cut Pro to Final Cut Express -- Format issues?

Hi,
I'm shooting a project on a Panasonic HVX-200A, and my cameraman is going to import the footage to his Final Cut Pro station. He's then going to transfer the FCP footage and data over to an external hard drive, which I am going to use to edit the film using Final Cut Express.
Will there be any formatting issues if I bring the data from Final Cut Pro to Final Cut Express?
Thanks!!
Sameer Ketkar

Clip files can be easily imported into FCE if they are QuickTime DV-NTSC/DV-PAL or Apple Intermediate Codec (720p30, 1080i50/60). If they are other formats/codecs they should be converted to DV or AIC before importing into FCE.
FCPro project files cannot be imported into FCExpress.
I'd suggest a trial run before committing the project to this workflow.

Audio Sync Issues Final Cut Express 3.0

Similar Messages

Maybe you are looking for