Audio sync issues with Flip video and PSE9?

If I upload directly from my Flip video camera to PSE9, the audio may start out as synchronized, but as the video progresses the audio becomes more and more out-of-sync.  If I use Quicktime to upload the video and export it as a Quicktime movie, the audio synchronization is fine in PSE9.  I have tried ALL the tech support suggestions, but no luck.  Does anhyone else have this problem?  I am running Windows 7.
Thanks,
Ron

Hi Tim,
You need to add this setting:
dynamicStreamBufferTime=8
The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
Looking forward to your confirmation that this solved your issue.
-Andrian

Similar Messages

  • Playback pauses and audio sync issues with live video stream

    I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player.  It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams.  It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
    The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
    I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux.  I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
    To see the stream with the Akamai player, go to:  http://live.kulabyte.com
    To see the stream with the OSMF/Strobe player, go to:  http://live.kulabyte.com/osmf
    I do not have JW set up for public viewing yet, but the two above show the distinct difference.
    We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
    If someone has ideas on debugging I can PM the actual video assets to you.
    Thanks,
    Tim

    Hi Tim,
    You need to add this setting:
    dynamicStreamBufferTime=8
    The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
    I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
    Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
    https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
    Looking forward to your confirmation that this solved your issue.
    -Andrian

  • Severe audio sync issues with DVR and RAI(Italian) channel.

    Having severe audio sync issues with the Motorola QIP6416-2 while
    watching RAI(Italian) channel. The audio is about 2 seconds behind
    the video. This is the only channel it seems to happen with.
    I just switched from Cablevision about a week ago and never had a
    sync issue with their DVR with the same RAI channel or any channel.
    I've tried changing hdmi cables with no success and I also went to
    component video cables but the problem remains. Resetting the
    box helps but within 15 minutes the sync issues return. Also,
    a channel change and back helps briefly,
    The only new piece of equipment in the mix is the Motorola DVR,
    nothing else has changed.  The DVR is connected directly to my
    tv.
    Any help is greatly appreciated.
    Mike

    Being a foreign channel, there may be something screwy with the framerate (PAL conversion?). I don't personally subscribe to any foreign languages channels and I doubt too many on this forum do either, so you may have trouble finding someone to replicate the problem on their end here.

  • Audio Sync Issue With FLME 3.1 and BMIP Card

    Hello Folks....First off..Happy Holidays to all.  Secondly...have Black Magic Intensity Pro Card (PCI-e) installed on i7, 3.33GHZ, 24 Gig Ram, Raid Controller  2x 600GIG Drives, Win7 64bit etc etc.
    Noticed today on a live show...we had an audio sync issue of half to full second.  This was being pushed via FLME 3.1 and audio was married to the BMIP audio inputs.
    Video input was Component and audio as analog.
    Any thoughts why this would happen?
    Bandwidth was more than acceptable (pushing 700kbps over a T1)
    Appreciate any insight.
    Thanks,
    KC

    Hi!
    I am having the same issue with the HD Extreme card. Did any of you find a solution to the problem?
    Best regards
    Jan

  • Canon cameras have audio sync issue with FCP?

    My mini dv deck died on me so,
    I am using a small palm size Canon mini dv firewire camera to transfer about 50 tapes.
    I am having a weird audio sync issue.
    Sometimes the capture footage plays down in sync - I pause>scroll>play - and it's suddenly out of sync. This keeps happening. Sometimes it plays in sync. Other times it does not.
    Because it's hit and miss- I'm not sure I can even re-sync.
    I imagine it could be the media drive (internal)- but I have other video files on this drive that play fine.
    I don't often use firewire capture.
    Is audio sync a common firewire issue?
    Will the quality suffer if I capture through composite/analog audio outputs?
    I can patch it through my
    decklink card.

    Audio sync is an issue with Firewire, just not all the time. Usually it is fine, but a lot of Avid people don't like Firewire for this reason.
    Most often it is a 5 frame sync issue. Slip your audio 5 frames forward and see if that solves the problem.
    As well, take a look in your Browser after you capture a clip and see if the Aud Rate is either 48,000.5 Hz or 47,999 Hz. I have seen the clips come in as both of these. Once you slip the footage, export the audio only, then reimport and attach the audio to the clip in the timeline. Should take care of it.
    Post back if these don't work.

  • Audio Syncing Issue with iMovie 10.0.1

    As was the case with iMovie 9, there is an issue with the audio syncing properly to the video when uploaded to YouTube. I am wondering if anyone knows of the workaround for the same issue with iMovie 10 (Mavericks)?
    Thanks!

    The bar codes are generated from an online service and are downloaded as vector art in the form of EPS files.I am opening the file in Illustrator after downloading the EPS file. I am not scaling it in any way, it just opens in Illustrator "wrong". "Placing" the file creates the same distorted effect. The EPS file looks fine if I view it in Preview or open it in Photoshop, but I need to use it as vector art.

  • Sync issues with HD Video...

    Hello!
    We've had some sync issues with several HD Videos. Recently, a shoot was done. Some shots were totally in sync and others were out of sync. Any idea what this could be from? Not sure if the shots came from different cameras or not.

    Hi,
    Yes, I apologize. The video editor wasn't giving me any details. I did see the 44.1/48khz issue online. So will this happen only if both are mixed in the same timeline?
    Thanks

  • Premiere Pro audio sync issues with 48khz audio on video file and 44.1khz audio on external audio

    So, I recorded video and audio on my Canon 5D Mark II at 1080p, 23.976 fps, and 48khz, 16-bit Stereo audio. And I used a Zoom H4 to record an mp3 audio file at 44.1khz Compressed. When trying to sync the audio in Premiere Pro CC, the audio slowly loses sync over time. I already tried to convert the 44.1khz mp3 file to 48khz in Adobe Audition. But that didn't fix the problem. Any ideas?

    There's always time-stretch changes to the audio file with "keep pitch unchanged" checked, I suppose. Mind you, I've heard of people doing it but haven't done it myself. There's other possible options I'm sure. There's been quite a few threads here on time-sync issues over time.

  • CS 6 audio sync issue with 24p P2 footage.

    Just upgraded to PP 6 from 5.5. With P2 720p24 footage that worked in 5.5 the audio does not hold sync in PP6. This includes playing the source or in a sequence. It is very far off appearing that the audio is playing at 29.97 and the video playing at 23.976. Footage shot at 29.97 stays in sync.
    Ideas?

    >footage that worked in 5.5
    1st, exactly what version of CS6?
    Current Mac is 6.0.2 and Windows 6.0.3
    2nd, there are know bugs with other codecs
    CS6 Bug AVCHD http://forums.adobe.com/thread/1004369?tstart=0
    -and http://forums.adobe.com/thread/1004369?start=0
    -and LOCK the media http://forums.adobe.com/thread/1077245
    CS6 Bug XDCAM http://forums.adobe.com/thread/1009064?tstart=0
    -and a codec http://www.calibratedsoftware.com/QXD.asp
    CS6 Issue/Bug MXF http://forums.adobe.com/thread/1074489
    You may want to file a bug report https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Audio sync issues with variable frame rates as well as .ts files

    I'm using Premiere Pro CS6 and CC, in Windows 8.
    I bought an AverMedia Live Gamer HD card to capture 1080p footage with, and the the videos it produces work perfectly during playback. No sync issues whatsoever. I'm saving them as MP4 at 30fps.
    The problem is when I import them into Premiere Pro, the audio loses sync at certain points. After a bit of digging, I've discovered that the videos have a variable frame rate, which Premiere Pro does not support. I don't know why, considering competing products that are significantly cheaper can handle them with a problem, but oh well. The capture card can also save videos in .TS format, which produces a constant frame rate, however when I import them into Premire Pro the sync is immediately off by a second or more. I assume this is for an entirely different reason. Again, they play back normally without a problem. Upon emailing AverMedia, I was told this was Adobe's problem and there was nothing they could do about it.
    What I'm wondering is if there is any sort of realistic solution to this as of now. Is there any way that Premiere can work properly with files that have a variable frame rate? If not, is this being worked on?
    Or maybe there's a way to get the .TS files back in sync, that way the variable frame rate issue doesn't matter anyway.
    Converting the files is not a long term solution. I'm working with hours and hours of HD video, and it would take way too much time to do this.
    Manually resyncing the audio is also not a solution. Again, this would just be way too much wasted time with each project.
    The only solution I see as of now is to switch to Sony Vegas until this problem is resolved in Premiere, if it ever is. I'm really hoping there is some other way, so if anyone has an idea as to how to fix this, I'd really appreciate it.
    Thank you.
    tl/dr:
    Is there any way to get around Premiere Pro not working with variable framerates? My .TS files are also out of sync, is there any way to fix that? Without converting or manually resyncing.

    >If not, is this being worked on?
    Discussed many times before... never a "yes" answer to your question... tell Adobe what YOU want at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    If enough people make a request, Adobe MAY add the feature (I don't work for Adobe, so no guarantee of anything)

  • Final Cut 7 audio sync issue with external audio

    Ok, I've seached around a lot and still haven't found the solution for this common issue, which is sync between video and audio wich were recorded in two different devices.
    My video is from a conference (a lady speaking all the time) ProRess 29.97 and my audio is wav recorded at 44.1 Khz. I have already converted my external audio to a fine AIFF 48 Khz, and I have already re-imported it with the correct 29.97 easy setup, as it shows on this video www.youtube.com/watch?v=Nt-nfelM8KA. That helped a lot but audio still goes out on sync when playback goes further (not that much, but it shows).
    On Premiere Pro, that wav file a correctly in sync, and I have had this issue before with FCP and now it has come back! help!
    Anyone found a real solution for this issue?

    Why not just use Premier? FCP is going to slowly die out anyways....
    Anyhow, a work around... using the speed change tool (sss) adjust the audio to be the same length of the video so it is in sync... Press command-J, make note of the percentage you sped up your audio. Now open your audio in STP, select all of your audio go to Process>Timestretch and adjust the audio and apply the same percentage.
    Listen to your audio. STP's time stretch is excellent because it adjusts the speed without changing the pitch.
    Save as, re-import your audio.

  • IPhone sync issues with 3gp videos:

    My girlfriend texts me a video from her iPhone 4 to my iPhone 4.  I downloaded it to my computer and put it in a file folder.  I try to sync my iPhone and iTunes crashes when it gets to the sync photos part every time.  I had this issue two weeks ago and after like 30 trys it synced.  Am I doing something wrong?  I just want to log videos in their own folders like I do pictures to stay organized.  Thanks.

    O.K this is rather hilarious because I am talking to myself here, but I actually found a solution that works.
    Check out this free program. http://www.qtsync.com
    It's free, so obviously I am not plugging something here. I loaded my 3gp files into here, and it has a function which will tell you the length of the audio relative to the video. As I suspected, all my video files were a few beats longer. It was literally this simple: change the value of the video length to match audio length. VOILA. Audio and video perfectly in sync for the entire movie.
    I was then able to use the software to export as .mp4 / .mov or whatever, ready for editing.
    This is a really simple and powerful tool, and I am guessing you could use it to correct a huge range of similar problems, as it doesn't require you to enter a framerate or anything, just simply match the length of audio + video.
    Ok. I am so happy right now I am going to start another thread just advertising this solution..because a lot of people have had the problem and this is the only thing I found that works consistently.

  • Audio sync issues with apple tv

    Hi All,
    I am having some issues with audio syncing properly on my apple tv.  I have my movies stored on an external hard drive - movies go through itunes through to my apple tv (as it should be) via home sharing.  Anyways, some of the movies seem to be out of sync when I watch them on my tv, but when I play them through itunes on my computer they are just fine.  I've tried taking the movie out of itunes and even renaming it before i bring it back in - but that doesn't solve the issue.  Any ideas?  Any help would be greatly appreciated.  Thanks!
    Stacey

    I just encountered this issue also. All my digital movies and dvd rips stream fine through itunes and into my apple tv. However I just imported a movie I made in imovie. The movie plays fine in quicktime or directly in itunes. When I play the movie on my apple tv streaming it from the same itunes account, the audio is out of sync.
    Any help is really apprecieated!
    D

  • Sony X85C - Bravia Sync Issue with Samsung Homecinema and WD Live Box

     Hello  I purchased the 2015 4k Sony TV X85c line, its the 55" with Model Nr: KD55X8507C (silver bezel). The latest Android TV version from mid July is installed and the TV is working fine - except for the interaction with my 2 other components:- a Western Digital Live streaming player box- a Samsung Homecinema HT-D6750W  I knew i could run into problems when mixing up brands, but the issue now is really bugging me: The Samsung homecinema is connected via the HDMI 4 ARC to the Sony TV. The Westen Digital is connected to the homecinema. All devices are HDMI CEC compatible, thus on the Sony I can see the other devices and even control them with the Sony remote - which "concept wise" is really neat, but something is failing.  It seems that the Sony trys constantly to switch between audio system (Samsung) and its own TV speakers when choosing how to deliver the sound. This somehow interfers with the menu dialogs of the Sony. As soon as I connect the Samsung Homecinema and go into the display menu to change image settings / modes it the menu will crash after some seconds (it just fades away). This does not happen when the homecinema is not connected, but then of course im missing the sound of my homecinema.  So there seems to be a certain interference and I assume it could be because of the constant audio switching between TV and audio system. I already tried to deactivate all HDMI-CEC features on the devices, but for the Sony TV's bravia sync its impossible to deactivate fully (the menu is just greyed and "on").  I'm getting some new and state of the art HDMI cables later this day, maybe this will bring a positive effect. Anyone experiences something similiar with the X85C range of products? Is there a way to handle it? ThanksAndre / xenom0rph  

    I "solved" the problem: Bravia Sync does not seem to be compatible with HDMI CEC / Anynet of the Samsung homecinema. I deactivated all HDMI CEC features on the samsung player and the WD TV Live box, and then the deactivation of bravia sync was possible on the TV. After that the issue with the menu crashes was gone. Now i try to get digital audio with optical to the samsung player. So i connected optical out from the Sony TV to the optical in of the player. There are different settings to be made in the sonys audio menu now which I'm still not sure what to do. It has different compression modes for the audio (auto 1, auto 2, pcm). PCM seems to work for most digital audio content, but i fear DTS is not supported by the Sony. I tried the XBMC Kodi Android App on the Sony TV and got digital audio on some movies, but not all of em....not sure if its an app or TV problem.  Oh well..for the moment i stay with the WD live streaming box which supports all audio formats and is connected via HDMI to the player, but its just a very slow cpu in there, so it would be cool to use the more powerful TV as streaming player.

  • Sync issue with Outlook: Notes and Contacts ok - Calendar stopped syncing

    Greetings,
    Syncing (via USB cable) between my iPhone 3GS (3.1.2) and Outlook 2003 SP3 (Cal, Contacts, and Notes) has never been an issue until my recent upgrade to iTunes 9.0.2.25. Since then, I noticed that my Calendar was no longer syncing either way. When I hit "Sync", iTunes would indicate that it's going through the motion of syncing calendar but no synchronization of the items take place. Contacts and Notes continue to sync fine. One off behavior is that when I connect my iPhone via USB, I get a pop-up window with "Apple iPhone" header
    indicating "Camera connected" with option to pick an app (ie. MS Word) to lauch for this action. Never seen this pop-up. I just cancel out of it.
    Few things I did to try to fix the issue, in vain:
    1. iTunes->Info->Advanced: forced a "Replace information on this iPhone" - no changes to my calendar
    2. iTunes->Edits->Preference->Devices->Reset Sync History - all calendar entries on iPhone are gone
    3. "Repair/Reinstall" iTunes by running the install executable
    I stopped by the Genius Bar for an appointment related to my battery issue and asked the fellow about my sync issue. He wasn't "aware" of the issue.
    Anyone has a suggestion for me to try? Thanks!!!

    I tried now several things to resync my data cause it realy s*cks without. I tried to install itunes 9.0.2.25, 9.0.1 and 9.0.0 but nothing helped so far. I also tried to set Outlook 2003 as standard program for mailing (one forum wrote that helps, too) and I tried to find out if something blocks the communication betwen Outlook 2003 and itunes. But nothing could help so far, still no sync.
    I find it interesting that when I connect my iphone to my PC an then switch in itunes to the device and the "info" pane where I can setup all my sync data with PIM programs that Outlook still remains there as default synced application. But the subfolder in contacts also the mail accounts that should be synced cannot be seen. The option to force itunes to overwrite the calendar, contacts, notes and mailaccount data on the iphone no matter what can be selected. But when i do the synchronisation all of these options are unmarked again.
    Atm I'm thinking of tracing the problem down with Filemon.
    Message was edited by: madmaxzwo

Maybe you are looking for