Audio sync when recording downloaded

Hi, when I download a recording from the connect server as a flash file, the audio tends to get out of sync. Typically our recordings are around 1 - 2 hours long, so it can be quite annoying
Any hints on ways to avoid this, or software we can use to resync the audio?
Thanks heaps
Jim
http://www.theaviationindex.com

I'd like to tag along on this thread, if I may.  Our organization has just signed up on a monthly program with Connect 8 and I am also having A/V sync issues on downloaded programs.  As with the issue described in the post from HavillandHornet, we are having problems holding sync in our downloaced .fv's of programs , which range in 15-30 minutes in length.
I understand that .flvs were, originally at least, not created to hold sync for long periods, although we get pretty good results when just playing back the recording off the Adobe server.  It's just the playback of the downloaded file that gives us trouble  I'm wondering if there is any way to set the download to record in a more sync-friendly format?    I'm certainly not having much luck in converting the .flv to an editable format, like .mov to make sync adjustments and cleaner trims.
We began using Connect 8 around the first week of May, and the upgrades your indicated may not yet be operable. What is the status on that? Will those fixes affect the sync integrity on the recorded download or just the online playback.
Any enlightenment, work arounds or general bright ideas would be very helpful.
garypickle55

Similar Messages

  • Loss of audio sync when importing Samsung Galaxy 2 (GT-I1900) video to Premier Elements 10

    I am loosing audio sync when I import video from a Samsung Galaxy 2 GT-I1900 phone even when using settings chosen by Premier Elements 10. 
    The file plays OK in Windows 7 media player.
    I have tried using both direct import from the phone and transferring the file separately without solving the problem.
    The Premier Elements is version 10.0(20110902.Mol11.B123.280463)
    Unlinking the audio and video makes no difference.
    VideoReDo reports the file as :
    File:                                     Name : C:\dcim from samsung\DCIM\Camera\20121121_114639.mp4
                                               Size : 0.886 GB
                                           Duration : 00:09:45.22
                                           Mux type : MP4
    Video:                                Encoding : H.264
                                      VideoStreamID : x201
                                         Frame rate : 29.91 fps
                                      Encoding size : 1280 x 720
                                       Aspect ratio : 16:9
                                    Header bit rate : 20.000 Mbps
                                         VBV buffer : 380 KBytes
                                            Profile : Baseline/4.0
                                        Progressive :  Progressive
                                             Chroma : 4:2:0
                                       Entropy mode : CABAC
                                           Bit rate : 11.626 Mbps
    Audio Stream: 1 (Primary)                Codec : AAC
                                             Format : ADTS
                                           Channels : 2.0
                                           Language : eng
                                                PID : x202
                                      PES Stream Id : xC0
                                      Sampling rate : 48000
    Letting VideoReDo simply rewrite the file resulted in loss of all but the first few seconds of audio. 
    Elements seems to have imported the file as NTSC-AVCHD-AVCHD LITE 720p 30fps
    The computer is running Windows 7 Professional  64 bit version  Service Pack 1 kernel 6.1.7601.17944 (reported by SIW)
    The computer motherboard is a Gigabyte Z68x-UD3H-B3 with an Intel Core i5-2500 CPU at 3.30GHz. Memory is 4GB.
    I note that others have had similar problems with non video recorder recordings.
    Can you suggest any file conversion of the original that will work – I have tried several with no improvement in the final result.
    And can anyone shed light on what is the basic cause of these problems?

    According to the Adobe installation information the trial version of Premiere Elements 11 is fully functional and the watermark is only present until a licence code is purchased.
    I have edited AVI footage from a camcorder using the program with no problems (and no loss of audio sync) and the watermark is also present with this.
    The odd placement of audio and video was caused by my not dragging the clip carefully enough.
    What is odd is that the clip plays completely normally using WIndows Media Player and VLC Media player so I would expect Premiere Elements to be able to handle it without problems.
    I think that there is some sort of bug in Premiere Elements' handling of mpe4 files (both in versions 10 and 11) rather than there being anything wrong with my computer.
    Is there some way of communicating this directly to the Adobe programers ?
    I enclose screenshots of the project settings:

  • My computer died and have new one.  I did not sync itunes on old computer before it died.  Will new purchases be synced when I download itunes onto new computer?

    my computer died and now have new one.  I did not sync itunes on old computer before it died.  Will new purchases be synced when I download itunes onto new computer?
    If not, what to do?

    Hello Nahuali
    The music will be there once you sign in with your Apple ID that used for purchases. Check out the article below to know the steps on how to make that happen.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Regards,
    -Norm G

  • Any way to boost audio input when recording?

    Hi; I have been recording speech interviews with Audio-Technica mics on a ProTools set-up and they've sounded great.
    I've recently tried recording using the mics in Garageband using a M-Audio Mobile Pre USB, but the audio levels are always too low unless the subject is an inch or two from the mic, which isn't the best way to get quality audio.
    Is there any way to boost the audio input when recording in GB or any other tricks people know of?
    thx, Charlie

    I'm actually having the same problem, except I'm recording straight into the computer (no interface).
    I tried using an MBox, but the computer won't even recognize it...(if anyone's got suggestions for why that is, I'll gladly take them...).
    My main question is the same as Charles's, however - how come the input level is so soft when recording using the "Built-In Input" (where I can use a mic, and have mobility) as opposed to the "Built-In Microphone"?

  • Warping of audio quality when recording Synths in GarageBand

    I have currently got back into using GarageBand and have noticed a strange error when recording a software synth sound.
    When simply playing back the sound through my midi keyboard the sound is fine, but as soon as I hit record and start playing the sound is broken up, and when I stop recording it returns to normal again.
    The sound is an ethereal type pad. It almost seems as if Garageband cant handle the sound complexity and is breaking it down but it seems unlikely giving the fact that the platform supports vst's like Absynth which feature plenty of such sounds.
    Has anyone else encountered the same problem, and if so, is there a way to correct it?

    Your actually using an AU not a VST inside GB. I also use Albino 3. What preset are you using. After you tweaked the Albino preset to your liking check albino signal level output to make sure your new tweaked preset is not overdriving its output. Back off on the master output of Albino if this is the case.
    Also check the audio meters on the track you have assigned Albino to in GB. Make sure those levels are ok.
    It could also be that you have tweaked a parameter in Albino to the extent that it is beyond the synths parameters to export that sound to GB without distortion, something which may not become apparent until you record it.

  • HDV imovie projects lose audio sync when burned in idvd

    I have 80 min. HDV projects from imovie sent to iDVD, after burning them onto dvd they play fine then lose audio sync after about 60 min. or so.....

    Painful in iDvd to do interviews when they happen to fall over the 60 minute mark, isn't it?
    If it's of any consolation, it's more reliable in Apple's FCS2 / FCP => DVDSP.
    Toast might be another option worth looking at....
    Good luck on this.

  • Why is the picture and sound out of sync when i download my videos  from iphone 4s

    Why is my picture and sound out of sync in my videos when I download them from my Iphone 4s?

    please share your advice. maybe no-one else replied because they didn't have an answer? by solving the problem yourself, and then sharing that information, you can help many other users overcome the same problem. welcome to the helpers club!

  • Lots of audio pops when recording from mixer

    I'm using FCP 5.1.4 on a mac laptop (don't know what type it is, but think it's somewhat recent). I'm recording a stage play's audio.
    Here's my audio flow:
    Mixer's 1/4" headphone jack -> 1/4" Stereo audio cable -> 1/8" stereo adapter at other end (have also tried 1/8" mono) -> Laptop's microphone port (no other input audio port available)
    I can get a good signal, but there's constant audio pops/clicks happening at a steady rate. I remember reading somewhere else that problems can arise when recording directly from a mixer due to the high signal strength coming from it. Any ideas why this is happening? How do I fix this?

    Phillip Roh wrote:
    What is a mic bus level output?
    Most better mixers have direct bus ins and outs. Just like plugging in a mic.
    Laptop doesn't have a line in port
    Get a different computer if you're expecting to enjoy doing audio capture.
    If i used the RCA or XLR output jacks, would the popping still occur?
    Irrelevant, it's all about signal type, resistance, milliamperes, millivolts and milliwatts. Not connectors. You can put an XLR on your power supply and it wouldn't change the voltage.
    I think my workplace may have a few USB audio things lying around. Like it has 2 XLR input ports, then connects to computer through USB. Do you know if they tend to need certain software, or if they're plug and play?< </div>
    Unknown from here. this is not a FCP question.
    bogiesan

  • Video and audio sync when viewing clips online

    When viewing clips, like on youtube, the graphics start playing, however there is no sound, only after a few seconds the graphics freeze and the sound that was missing starts playing and the graphics resume when they're in sync again.
    Also when I pause a video and click play the clip will not resume and I have to click the "time bar" and then it will play.
    My 13 MB Pro starts furiously blowing the cooling fan and consuming battery life when viewing clips on most video sites.
    How can I fix these things?
    This already happened before upgrading to Lion, btw.

    Are you capturing this thru the LS? and what is the format you are digitizing? DV? or uncompressed? Would be best I'd think if you don't capture audio and video as separate files too. That leads to problems especially with DV captures.
    How are you monitoring the audio and video? all from computer or? You could be in sync and not know it if you are using computer speakers for monitoring audio when watching video externally for example.
    If you monitor both from the computer and it is in sync, but not when you record to video, I'd suggest that you export a self contained movie of this material and import that for the print to the beta... I'll wager that will keep your sync. If this doesn't help, might want to post this in the AJA KONA forum at http://www.creativecow.net Might be something to do with your LS, not sure but do have the latest drivers installed on it...
    Jerry

  • How do I make my audio better when recording videos?

    what is the best way to enhance audio on videos I make with my iPhone 4?

          Thanks, Bobby
         All good advice.
         I went and checked out the link you provided, and started salivating immediately. But $200 is too much for me right now. Looked at the lav (what does that mean?) mic adjacent to it-- lovely, very portable, and almost affordable. I registered, and created a wish list. I think my wedding anniversary or something must be coming up soon...
           I was thinking about my barely-there audio today, and just for the fun of it checked my volume button. I NEVER turn it down. Never. But it was, by about half. Does this have any effect on recording, or just ringing? (Can you tell I'm almost totally techno-ignorant?)
           Something else occurred to me too. When I was shooting, twice so far (and I am cringing writing this), I was talking really low the whole time. Last night, cuz my hubby was asleep in the next room; this morning, because I didn't want to scare the birds I was videoing away...   uh.....   Well, DUH.
           Actually, I have already bought one of those little capsule mics, found it on Amazon. IT WON'T FIT ON MY PHONE WHILE THE CASE IS ON. And I am scared to death to take the case off! The thing's made out of glass, for cripes sake, and I am a CLUTZ.
           Thanks again!! I'll be coming up with plenty more stupid questions for quite a while, I'm sure

  • Intermittent audio buzz when recording with power adapter

    While running my 13" Unibody MacBook Pro on the power adapter, I get an regularly pulsing buzz that affects audio recorded in through my Griffin iMic. There's a sample of the buzzing I recorded at http://drp.ly/lmd8R - it starts halfway through it. The buzzing starts a few seconds after plugging in the power adapter and stops a few seconds after plugging it in. The power adapter is grounded and the cord is separated from the audio cords. Any help would be appreciated.

    Are the Mac and all of the connected devices plugged into the same grounded UPS or outlet strip?
    When I had a similar problem I ended up having a very serious electrical wiring problem in my house–a poor earth-neutral bond in my case. You may want to have a professional electrician check things out.
    Message was edited by: DaddyPaycheck

  • Audio levels when recording iPad video

    how do i contro audio input levelsl when i record video on my iPad?

    The best advice is to tell them their work is coming back non-compliant and you can't have that.  Let them figure out why and solve it.  (That's is part of their job, after all.)

  • Audio sync when exporting to Audition

    Let's see if I can explain this...
    If I direct link a sequence from PP to Audition and the bring in a rendered mp4 as a reference (both 48khz), and put the audio from the reference vide on a separate track. There is a slght offset (around 4-5 ms) causing an echo when I play the reference audio and the audio from the direct link operation at the same time. Get the same result if I bring in an omf and the reference movie into Logic Pro X.
    The reason for bringing in the reference video with sound is that I want to double check the sync.
    I have a musician and audio background so I might be a bit picky with sound....
    How do I remedy this without nudging the audio clips? I there something in the export of the reference video that I might have missed?
    I am running the latest version of all the Adobe applications and using a MacBook Pro early 2013 15" 16GB and GeForce GT 650M and OS X Yosemite 10.10.1.
    Audio Interface Saffire PRO 24 DSP
    Thank's
    J

    Additional information: The format of the clip I have used as a test is ProRes 442 48KHz 16-bit stereo

  • Audio breakup when recording

    Unusual set-up:
    Using "HAUPTWERK", external software providing pipe organ samples developed from modeled organs.
    Logic sends MIDI to the HAUPTWERK software through an "AU/VST Link" plug from Hauptwerk, and accepts audio through the same plugin.
    When the external program is set up properly, Music Typing will play clear sounds from the organ samples selected by "pulling stops" on the HAUPTWERK software.
    But when I hit the Record button, the sounds usually break up; seems to happen 9/10ths of the time.
    Observed on 16 GB memory flash storage MBP. Using a basic version of the Hauptwerk software that uses no more than 3 GB memory.
    (Anyone interested in organ software should visit http://hauptwerk.com.)

    Thanks much for the hint.
    Tried that - it was suggested in another topic, but might not have done the right thing.
    Audio buffer set to 1024. Buffer range set to "Large".
    Threads are "Automatic".
    Note that I get broken sound after hitting the Play button as well.
    Also, the breakup goes away after changing tracks several times.
    ---- Just noticed something strange:
    There are 3 software instrument tracks, all of which use organ-software sounds. For some reason the level meters only show up in the first track no matter which of the others I play on, but I get the right sounds for each track.

  • Audio Cuts when recording is enable. (Quality Manager)

    Hi
    I have deployed a recording QM solution (QM 8.5.2(SR2), CCX 8.5.1(SR4), CUCM 9.1) and I have a critical issue about the quality of the calls.
    I'm using a Network Recording using Built in Bridge phone feature.
    When a caller call to the agent and the recording is enable, the audio from agent to caller has a lot of cuts. Most than 50% time.
    When the call is no recorded works fine.
    Any idea?
    Thank you
    Best regards

    Fix it.
    It was g722 and iBLC codec. They were activated in service parameters. Just desactivated them and reset the phones.
    I hope it helps.
    Best Regards

Maybe you are looking for