Audio too low for PCs

Our exported iMovie to iDVD 5 has almost no volume on a PC.
So low can barely hear it.
Is there any way to increase the volume of the iMovie without messing up portions of the video/audio?
Just increase the total volume, not individual clips?
Message was edited by: René O'Deay

plays well on my mac, but not my sister's. volume too low on hers.
And hers won't play the DVD+RW, only the DVD-R.
And somehow she messed up the audio tracks, so they are no longer separated. Do not know how she did that.
Sister has been using my computer to edit this, as hers has OSX 10.3.9 Jaguar (?) and iMovie 3, and no superdrive like mine. (it's an older Powerbook G4, with less RAM and less )
She is dyslexic and has lots of problems doing things right, or learning new apps.
But she made this work, except the volume problem.
Message was edited by: René O'Deay

Similar Messages

Low Battery - Battery too low for Radio use - And Curve will not Charge - HELP!!!

Need help and lost without BB. My BB displays Low Battery. If I try and make a call I get Battery too low for Radio use. I have tried to charge the BB but nothing happens and still cannot make call or charge unit. Tried charging overnight with car charger and A/C adapter. Tried removing battery for one minute and reinstalling.
Any ideas????

Greetings, and welcome to the BlackBerry.com Support Forums.
When you are connected to the charger, do you see the lightning bold charging symbol displayed over or next to the battery indicator on the screen of the device? If so, then let it charge a while. A battery at less than 10% charge can take an hour or more to get just 10% higher, and then the charging will move faster.
If you are not seeing the charging indicator, then you could have a bad USB port.
If you connect it to your PC via the USB cable, does the BlackBerry appear to connect?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Too low for radio use at 50%

my blackberry 9360 with the newest update out when at 50% battery comes up saying too low for radio use then just suddenly goes from 50% to 0 in a matter of seconds as i watch it cant down faster than anything. i tried pulling battery out when fully charged with charger in but still not working how do i fix this?

Oh...sorry...I think I was not clear..."known good" and "new" are not necessarily the same thing. While rare, a new battery certainly can be defective. Plus, finding someone with an identical BB without these same problems, and trading batteries, is certainly a less expensive method for carrying out this test. Again, sorry about not being clear on that point...
Anyway, refer:
KB14320How to maximize free space and battery power on the BlackBerry smartphone
It is really quite impossible to predict the "normal" consumption rate for any individual user -- each person is unique, and will demand a different level of resource consumption from everyone else. To me, the key is to determine what is normal for your usage patterns...and then become concerned when things deviate from that.
It is also always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PCTFREE too low for a table

Hi,
Looking at the Server Statistics in Toad, I see that I have "PCTFREE too low for a table". How do I know which table?
Thanks,
Johanna

Don't know much about "Toad Statistics" but which version of database are you on?? and are you using LMT?? Run statspack for more accurate statistics and it will be helpfull to identify the root cause. Are you experiencing any performance problems??
Daljit Singh

SP2-0614:Server version too low for this feature

Hi,
In the preparation phase for Oracle 9i upgrade, (Step 3.7 - Oracle 9i-Unix upgrade Guide)
we ran @CHECKS.SQL under /oracle/stage/920_64/Disk1/SAP directory
received errors SP2-0614:Server version too low for this feature
ORA-01034:ORACLE not available
Source System: Oracle 8.1.7.4, Kernel 620, HP-UX 11.11 9000/800
I went though Oracle site for this issue and it says, that we need go for patch to resolve this issue. But I am not sure, if this is needed or not. Shall I can continue upgrade without this patch?
Please help me to resolve this issue.
Thanks in advance
Regards
Srinivas

what is parameter value for <compatible> in initSID.ora ?
it should be set to 8.1.7.4

Warning: PROCESSES may be too low for current load

Hello,
I have 64 bit centOS Server and have oracle 10g installed on it.
We have 8GB RAM and 64 bit Server but we were able to install oracle on 2GB SGA only.
From few days I am facing following error:
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=115, want 8 more but starting only 0 more
I have executed following commands:
ALTER SYSTEM SET max_shared_servers=200 SCOPE=MEMORY;
ALTER SYSTEM SET circuits=300 SCOPE=MEMORY;
But I am still getting the same error,and server average load goes too high and needs a oracle restart.
Please let me know in case any one has solution for this problem. Its urgent.
Thanks in Advance.

Sir ,
please see the output of the below query .
this error had found today early morning when rman backup get start .
SQL> show parameter process
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 10
log_archive_max_processes integer 2
processes integer 500
SQL> select count(*) from v$process;
COUNT(*)
93
SQL> select count(*) from v$session;
COUNT(*)
94
the error msg in the alert log file is
Warning: PROCESSES may be too low for current load
shared servers=1, want 1172 more but starting only 405 more
Edited by: user9353210 on Jan 4, 2011 9:30 PM

Blackberry curve 9320 batt too low for radio use

I have had this fone since june and have constantly had probs with the battery life.its now sayin battery is too low for radio use even when there is half a white bar.keeps cutting out during calls.I've constantly got to do a battery pull!any ideas??

Hello guys,
I found the solution! I have 2 9320 and both developed this problem after 5 or 6 months. Battery too low for radio use even if nearly fully charged. I tried everything what described here- battery pulls, soft reload, deleting apps, pulling battery out with charger connected- nothing worked- just dont waste more time. The solution is easy and its not software problem! Just open your phone- if you dont know how check on youtube so you don't damage your phone and simply clean battery connector in a place where it is touching the mainboard. My bb board was black in that place- came off easily and connectors on mainbord looked like new after. I used zippo lighter fluid and clean cloth. Since then no problem on both my blackberries- never switched radio off again with battery not beeing red. I think there was not enoug power flow through this connector causing me going crazy. Now my blackberries are amaizing again! Hope it helps!

Battery too low for Radio Use - Even on Full Charge

Off late I have been having an issue with my BB Curve 9320, even when battery is fully charged, at the time of checking SMS, BBM Messages or Whats App Messages, the phone show up with "Battery too low for Radio Use" And put off the wireless services off the phone. Once I exit the applications the phone turn back on an continues to work as normal, untill I launch BBM or whats app again.
I had given the phone to the Blackberry service centre for this problem, they kept it for a week and gave it back to me today saying the problem has been fixed, however am still getting the same problem.
My phone is still underwarranty, please suggest what needs to be done.
Thanks!

Hi and Welcome to the Community!
Given that you've already begun formal service for this issue, I recommend you continue with that. After all, they said it was fixed, but it's not...don't you want to challenge them on that fact?
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"Battery too low for radio use" - Curve 9320

Since early on my curve 9320 has given me a "battery too low for radio use" warning at very random moments often times when the battery is still halfway into the white area. Sometimes this can be reset manually in the setting by turning radio back on, however this does cut into calls, messages and other activities.
I have changed the battery recently thinking this was the cause of the issue, however this did not help. I am still getting the error...not to mention the short battery life of this device...this is very frustrating.
Is this a common problem and if so how is it solved? Any help is appreciated!
BV

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Salary too low for programmers

I think that salaries are too low. After deductions I get 1.500 Euro on my bank.
Okay, I'm a junior programmer. But programming is hard and one needs a lot of knowledge. I don't think that I earn enough money. If I count the learning which I do in my spare time, I work at least 45 hours a week (38,5 are normal in my Country).
What do you think? Is it enough (1.500 Euro)? Its a German salary.
1.500 Euro are about 1.750 Dollar.

38.5 hours per week in germany ?
No one works this little, except people working at large companies where the unions have a big influence. But with ANY job (even at large companies) that gets you as much as you earn (1500 euro after taxes is a lot!) you will end up doing overhours. That is just normal.
So it is your pre-tax income that matters and that can be taken as a basis. Lets suppose you earn 2500 euro per month before taxes. That seems reasonable if you have no college degree. If you have a college degree you should earn more, lets say 3000 euro per month. If you have a college degree and several years of experience and most important good references (like applications that you have written that are in production use today) then you will be making 4000 per month easily. If you are creative and willing to work up to 50 hours per week and have a lot of allround experience (at least 5 years), then you can make 5000 euro or more per month ... that is BEFORE taxes, you after-tax income depends on your family-situation and all that ...
Also these figures depend on whatever extra benefits you get from your employer ?
Do you have a pension insurance ? (You should have one, because the public pension system will not get you anything when you are old).
Do you get extra monthly salary for christmas or for vaction ?
Do you drive a company car privately ?
So your salary might be too low, but from the given informatino that is hard to judge. Most of all your ability to create profit for your company matters, that is even more important then the skills you have. Since your boss couldn't care less, what your skills are, as long as the profit is ok.
So give additional information, and then we should chat about the strategy for your "gehaltverhandlung" :9
regards, stepan

Help! Sometime, the voice is too low for the receiver

Hi, I've found the voice issue of my iPhone: Sometimes, I use my iPhone talking with others, the receivers complains the voice is too low(Especially, serious when it's low battery). I've restarted my iPhone but it doesn't work. It's back to normal after it's fully charged. Do you why? and how to fix it? Thx.
Frankie

The volume via the built-in phone/earphone is no problem. The issue may be the built-in mic, it seems to be too leak for receive the voice, so the others(the receiver) can't hear clearly.
Frankie

Vibrating intensity too low for BB Z10

Hi Team,
Any idea on how to increase vibrating intensity for BB Z10 ?
Currently the vibrating intensity is too low to feel and missing the calls.
OS: 10.0.10.90
Thanks,
Ravindra Dolas

I don't think there is a way to increase the intensity or the number of vibrations on the Z10; another failure by the developers of taking away existing functionality.

Speakerphone option is too low for practical use. Can this be corrected?

I have the iPhone 2G and the speakerphone really ***** (for lack of a better term). I'd like to use it more often but even on its loudest setting its barely audible. Can this be fixed without hacking? Is the 3G significantly louder? Thanks for any insight as I love the phone but may have to switch if this can't be resolved.

You will have to send feedback to Apple as this is a User to User forum.
http://www.apple.com/feedback/iphone.html
I agree that the volume is to low for practical use, and the physical aspects don't help. The speaker is one of the tiny holes in the bottom, so you need to aim the end of the iphone at your face to make the most of it.

Volume of Line-in Audio Too Low

This question could apply to any version of Garageband, but I'm using this one.
The problem is I have many different things connected through my line-in, such as an electronic drum kit, a microphone, an electric guitar, and a synthesizer. When I record in garageband, the volume is always too low. No matter how loud I drum, or strum, or sing, or play. Even with the overdrive its too soft.
I've adjusted everything. In system preferences I raised the line-in volume to the max. In garageband the track, and master track are on the max. On the instruments w/ volume control, I've already put those on maximum volume.
What else can I do?

Is it worth the $40?
That's not something anyone but you could answer. It should give you much more control over your gain settings, but value is in the eye of the beholder
Could I use all my instruments
at once
You couldn't record them to separate tracks, no. But anything you could plug into it could be "pre-mixed" and recorded to a single track (or using pan controls, mono instruments could be recorded to 2 tracks)
or use the features with garageband, like the
gain and stuff?
I'm not sure what features you're referring to.
And would it really increase the volume?
It should. Others in this forum use this exact mixer very successfully, though I do not have this one myself.

Visibility of the font in tabs, search window and tool bars is too low for me. (My vision is declining). Can I make these larger? Screen resolution is 1280X1024

I find the font size used in the tabs, headers, etc too small. Maybe I'm missing something, but I can't find a way to increase it. Also the icons for accessing Bookmarks and Home page is small and hard for me to deal with.
I do resize web pages, using Ctrl and +, that's not my problem.

This is related more to Operating System settings, ie Windows 7 in your case, as the interface is using your OS. You could change the OS settings , or even the screen resolution. A lower resolution will actually give you bigger text.
Changing one of the Firefox preferences also has that effect, I will turn on my other machine and look for the answer as to which one it is.

Audio too low for PCs

Similar Messages

Maybe you are looking for