Audio track 1 and 2 not lined up??? help!!

When you put clip in timeline they go on 2 audio tracks for some reason. well, i must have deleted something I shouldn't have because 1/4 way through movie the 2 audio tracks are not directly lined up with one another. for some reason the bottom track says +15. I tried to undo but you are openly allowed 10-15 or so 'undo's" and I must have made error long time ago and not noticed. Then I tried to lock the audio track 1 for my video clip and move the audio track 2 directly underneath it but it won't let me. Even when audio track 2 is unlocked I cannot move audio track 1 for same movie clip.
When I play my movie the dialogue is not synced anymore. Can I fix this?
suggestions?

Birmy wrote:
I have been told by a friend to re-do my entire movie from the point the audio track 1 and audio track 2 have become displaced. If anyone in the Apple community can help me I would appreciate it.
I find it hard to believe that when audio track 1 and audio track 2 become displaced there is not an easy way to line them up again. Since 80% of my movie has an audio track 2 clip that has a red icon with + 15 on it it seems to suggest that audio track 2 is 15 frames off of audio track 1. (Audio track 1 and Audio track 2 are from the same video clip)
So I have about 20% of my movie clips that have lined up Audio track 1 and Audio track 2 and then all of a sudden the audio track 1 and audio track 2 are not lined up. So I hear an echo to every actor who states dialogue because audio track 1 "says the line" and then of course audio track 2 which is not lined up "says the line" a few seconds later.
If anyone can answer this question you will save me about 10-15 hours of work. Thank you!
Your friend is, umm, to be kind, ignorant.
There is an easy way. Right click on the red icon and select slip into sync.
The most likely explanation is that you have deactivated the link function of the timeline. It is a small chain link icon in the right upper corner of the timeline button bar.
Since you are having so many problems associated with yoru project's audio, I strongly urge you to learn how to increment your project on a daily basis so you have an intact version history (no, I'm not going to explain that to you) and be absoltuey CERTAIN you understand how the auotsave vault works and how to recover your project if you need to.
bogiesan

Similar Messages

Multi track project shows audio track 1 & not 2 need help!!!!

hello everyone... Have a sequence in fcp 1 video track 2 audio tracks i right mouse click the sequence go to send to click on multi track project it sends to soundtrack pro but only track 1

This would frustrate me in the beginning and sometimes it will come back to me. I'll blame that on the Pro tools I have installed. Make sure that device is enabled in controll panel, hardware. Disable the ones you don't use. I don't think AA will recognize usb or firewire hardware if that is what you have. Needs to be a card. I use the M-Audio Delta L1010. 8 inputs. I use 8 direct outs from my mixing board into the 8 inputs on the card. Sounds very good for the price.
Good luck.
Donnie

Audio track edits not saved

I am using Captivate 4. I have a group of files where any edits I make to the audio track are not saved. The audio plays back fine in the audio editor. It just will not save the changes I make to the audio track (cut segments, add silent segments, etc.) I make a change, click OK in the audio editor, close the editor. When I reopen the editor the changes are not saved. I tried uninstalling and reintalling Captivate. I tried saving the file under a different name. Any ideas why this might be happening and if there is any workaround? thanks.

Hi there
You should ensure that Captivate has been updated to the most recent release. The developers released an update after the initial release. Additionally, you may need to follow what is outlined in this blog post. I had to do that on my PC.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Audio track will not record - picture is fine PE9

PE9 audio track will not record. Tried in several projects - audio gets through to computer - but the audio is not being recorded. Help please.

Hi ATR
Was transferring a client's DVD-R into my Adobe PE9 to do some editing requested by client.
The audio from the DVD was coming through clearly on my computer speakers but when I finished tranferring I stopped recording and discovered the video track was fine but there was no audio track.
Tried recording said DVD into some of my other files on PE9 but same thing.
Since posting my cry for help I uninstalled PE9 and reinstalled it.
This appears to have fixed the problem as I am now transferring client's DVD-R once again.
A quick check after a few minutes revealed the audio track is now being recorded with no problems!
Thanks for your interest.
Kind regards
David

Gettin audio track and instrument in time.

i have logic pro 7.2 but when i import an audio track and then try to create an audio instrument in the matrix edit i cannot seem to get the audio instrument in time with the audio track and they both hav the same bpm. so cannot anyone help me plz im sure its a simple thing 2 do

Presuming the tempos are a spot on match, then It's all about locking the first downbeat of the audio to the track, in this example ( a drum loop ) the orange anchor point is locked to the first kick drum of the audio in the sample editor, so no matter where I drop the audio, it'll always be in time.
If the start point is not as clearly defined, the just move the anchor around till it sounds right.

Is there a way to get an iPod touch to play one audio track and stop.

Is there a way to get an iPad to play one audio track and stop.
I work in education and particularly music. Teachers are looking to create a playlist of selected track but only want the selected track to play then stop.
This allows them to talk to the class during presentation and not worry about having to stop playback mid discussion.
I've been successful doing this from appleTVs homeshared to a library by unchecking songs in the playlist. But It would be useful to instructors who have there own media on their device.

Thanks for a cognative answer TXMark.
For what its worth to any readers that work in education and would like this play once and stop 'feature'
I had great success in homeshareing a iTunes library of teaching material and creating topic specific playlist and used apple remote app to control an appletv connected to that homeshared library. As TXMark suggests, uncheck the songs in iTunes and the media will not automatically play the tracks in sequence.
note: if you have video media that you would like to have in the playlist, be sure its listed as a music video in the options of get info of track. otherwise the apple tv will not see the media in the playlist and will put it in the movies section of the library.

Is there a way to get an iPad to play one audio track and stop.

Is there a way to get an iPad to play one audio track and stop.
I work in education and particularly music. Teachers are looking to create a playlist of selected track but only want the selected track to play then stop.
This allows them to talk to the class during presentation and not worry about having to stop playback mid discussion.
I've been successful doing this from appleTVs homeshared to a library by unchecking songs in the playlist. But It would be useful to instructors who have there own media on their device.

The only way to stop after a song is to create a playlist consisting of only that song.
For feature suggestions use http://www.apple.com/feedback/ipad.html

How to import 2 separate audio tracks and keep them separate?

I need advice about importing two separate simultaneous audio tracks and keeping them separate. I am importing footage from my Sony PDX-10 DV Cam.
In the field I had wireless microphones on two people, a man and woman. I interviewed them separately. The man was on channel 1 and the woman was on channel 2.
While shooting the man, for example, I could also hear the open mic of the woman who was maybe a block away talking to some friends. But her distracting sound was on CH 2 and in playback on the camera, if I dial down the volume of CH 2, I no longer hear the woman and I have a clean audio track, Ch 1, of the man who is being filmed.
I'm trying to import the interviews into iMovies with only the relevant track turned up and the distracting track turned down. When I listen to the audio from the camera on my headsets, I can get clean sound of just the person who is on camera. But the FIREWIRE seems to grab both tracks, even though in playback i'm listening only to the clean track.
Does anyone know how I can send just one audio track to IMovie? Any way to prevent the Firewire from importing both Ch 1 and Ch 2 at the same time?
I only want the sound that's relevant to the person who is on camera. And I know that in the camera, it's possible to listen to just the track from one channel. I'm hearing just one track through the headsets, because I can sucessfully dial down the other track. That's the way I want to import the footage to iMovie. But the FIrewire seems to grab all the sound it can find and carry over both CH 1 and CH 2, which means I'm left with a jumble of sound that is not useful.
And finally, if the firewire needs to grab both tracks, is there a way to assign them to two separate tracks in iMovie, so I can then simply turn one of the tracks off?
iMacG5 Mac OS X (10.3.9)
iMacG5 Mac OS X (10.3.9)
iMacG5 Mac OS X (10.3.9)

welcome finecut to the  boards of discssions ...
nope.
iM handles the two stereo-channels as "one track", and offers 3 tracks of stereo.. (the one inside the video, 2 additional tracks...)
I would... :
* export clip(s) share/Quicktime/Expert Settings/aiff..
* in a designated audio processor (Garageband, Audacity, ...) seperate the two channels, creating two "new" ones, stereo, where one channel is located in the stereo middle..
* import these two "stereo" files into iM, into Track2 and Track 3 ...
.. boom!done

Why does audio in clip end up as Audio 5 and not 1?

After importing a file and adding it to the timeline, the audio track is assigned Audio 5 and not Audio 1. In order to get it to Audio one, I have been deleting "all empty tracks". This results in Audio 5 track becoming Audio 1. What am I doing wrong? Is there a preference which I missed.
My workflow is as follows. Import clip, drag to Program Sequence window, which adds it to the timeline and thus Audio 5 becomes the clip's audio track.
MacPro (1,1), OS 10.6.3,

You can tell the channel-count of an Audio Track by looking in the upper-right of the Track's Header. There are three icons: a single "speaker" (mono/i-channel), two "speakers" (2-channel/stereo) and 5.1 for 6-channel 5.1.
If you do not have the correct channel-count Track, PrPro will create one, with the proper channel-count, automatically, when you drag such a Clip to the Timeline.
Good luck,
Hunt
PS - if you find that you use certain channel-count Assets often, you can set the appropriate number of those as the default. My default Sequence is 2 mono, 4 stereo and 1 5.1 w/ 5.1 Master. If I do not use all of those in that Sequence (do not use the 5.1 that much), I just Delete Unused Tracks. In the default arrangement, mono will be first, stereo next followed by 5.1. However, you can Add Tracks (and spot them to several locations), to get any order that you want. As my mono Tracks are often SFX, I might NOT create them in the New Sequence, but instead add them down at the bottom, keeping my stereo Tracks up at the top. Choices, choices, choices.

HT1349 my iphone was stolen at the airport, it was in the laggage. it is still sealed and not activated. please help

Dear Sirs,
my iphone was stolen at the airport, it was in the laggage. it is still sealed and not activated. please help how to find my iphone.
these are my iphone detail:
IMEI Numbers for Item 000010
Serial Numbers for Item 0010
F7*******5MV
<Edited By Host>

You are not addressing Apple. They would not be able to help you. This is a user to user forum. If the device had not been activated, there is no way to track it. Report the theft to the appropriate law enforcement agency.

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
iTunes: Grouping Tracks Into Albums

TS3297 i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

Permanent capture only 4 audio tracks but not 16?

everytime i capture ...the log n capture audio tracks will automatically make all 16 tracks on....i have to manually shift off rest 12 tracks...any solution to permanent capture only 4 audio tracks but not 16?

this is my picture showing...icant find the audio button...>.<....plz correct me if im wrong..
[URL=http://imageshack.us][IMG]http://img137.imageshack.us/img137/5505/picture1ye5.png[/IMG][/URL]

I down loaded an audio book and not all of it downloaded

I down loaded an audio book and not all of it downloaded, it gets just over an hour into the book and the timer keeps going but no sound

How to report an issue with Your iTunes Store purchase

ITunes showing error 29 and not updating iOS help me please

iphone 4s showing apple symbol so i tried to connect to itunes .iTunestrying to update but later showing error 29 and not updating iOS help me please.

Read this - it should help
http://support.apple.com/kb/TS5254?viewlocale=en_US

Audio track 1 and 2 not lined up??? help!!

Similar Messages

Maybe you are looking for