Audio Track.......X-Fade bug.......

Ok,
This bug has existed for a loooonnnnngggggggg time
When you set the "Drag" control (upper left in arrange window) to X-Fade........I sooo want this to work!............all **** breaks loose ...
sometimes it works.......but usually not....Any work arounds? There are weird graphic bugs (x-fade hangs....i can't even explain it...anyway, you know what I'm talkin' about)
SvK

When you playback the edit does it sound right?
X-Fade should not truncate or trim the regions like 'no overlap'. So the start position of the second region in the sequence of events will sometimes appear to be underneath the end of the 1st region.
So let's say you have a 5 minute region. Then you edit a 20 second piece in the middle of that other region. Sometimes you will only see the longer 5 minute region but you always see the fades in the middle where the edit piece is. If you click on the track you will see the edit piece but it's often difficult to select.
Is that what you are talking about?

Similar Messages

  • Missing Audio track controls (fader, solo, mute, sends, inserts etc...)

    After doing a "save as project" I ended up with 2 big problems. When I pull the song off the CDR and open it up on my computer the controls for some audio tracks are missing. I lose anything having to do with track control such as input, output, fade, solo, pan, inserts, buses, mute, record. The only thing i can see is the group assignment and automation pull down menus. The other problem i have is that i have to manually relink all the audio files. Why can't the session file find the audio files??? They are all in the audio files folder right next to the session file. Arg. i am running logic pro 7 and the computer that the "save project" was completed on is running logic 6 express 6.4.0.

    I'll take a stab at it.
    Sounds like your parameters are not viewed. In the arrange window menus - there should be a view menu and it allows you select what things to see for each track.
    Maybe view parameters or view channel strip only settings may help.
    Not sitting in front of Logic at the moment.
    May have something to do with goign from L6 to L7,but i'm only guessing on that one.
    hope this helps
    B
    G5 1.8/ 3GB Ram Logic Pro 7.1.1   Mac OS X (10.4.6)  

  • Bugged audio playback? When I start working with more than 1 audio track.

    Hi!
    I have been using premiere elements 12 for editing FullHD videos.
    Brand new for me just bought it like 2 weeks ago.
    Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
    This problem is headache and turns my simple editing into almost impossibilites.
    I have had this problem with all my projects. _ALL_
    Usually the problem seems to appear when I want to start working with several audio tracks.
    At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
    The audio starts to disapear randomly from all the audio tracks.
    It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
    I have tried to look help on forums and search all what I could find, but havent been able to solve this.
    Small fix has slightly helped:
    I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
    I simply cannot understand why the playback disapears, I fear it is a bug.
    I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
    To solve the matter I have changed my audio setting in PE12.
    Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
    I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
    I have deleted my C:\ appdata\roaming\adobe  premiere elements & premiere elements 12 folder preferences.. not helping..
    I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
    I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
    I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
    Please anyone? I am feeling hopeless here.
    Info on my computer:
    Operating system: Win7
    Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
    memory (RAM): 4GB
    system: 64bit
    <moved from downloading, installing, setting up forum by mod- kglad>
    Message was edited by: kglad

    First of all, thank you for replying my message!
    I will go and try to answer best I can.
    Source media properties:
    Progressive frame rate, I record this from a game.
    Recording program: dxtory
    codec: Lagarith Lossless codec
    Format: avi
    Frame width: 1920
    Frame height: 1080
    Data rate: 1990656kbps
    total bit rate 1992192kbps
    Frame rate 30/frames/seccond
    Audio of video properties:
    Codec: PCM
    Format: 16bit, stereo
    Bit rate: 1536kbps
    Channels: 2(stereo)
    Audio sample rate 48 kHz
    In addition to that I use wav files for music and narrate
    Music files sizes 20-50mb
    bit rate: ~1411kbps
    In total sizes of audio involved is usually something like 300mb
    What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
    I opened new project and this is what i got:
    Editing mode: HD 1080i
    Timebase: 25,00 frames/second
    Frame size: 1920 x1080
    Audio is 48000 Hz
    (I dont know how to change these, btw. Program don't seem to let me change editing mode.
    I also looked up my most recent project and found these settings:
    Editing Mode: DSLR
    Timebase: 30,00 frames/second
    Frame size: 1920 x1080
    ..and same audio settings
    Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
    Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
    Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
    My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
    In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
    Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
    No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
    I don't have any other audio problems with any other programs.
    I am more than happy to provide more information if needed. I hope this information helps.
    In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
    I have also looked up my firewall settings, anything involved adobe and premiere..
    In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
    I hope this helps, I would really like to solve this problem.
    Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

  • How do I apply a fade to the end of an audio track?

    I'm using Captivate 7, and have added one of the Gallery sounds to a slide in my software simulation. I want the track to fade at the end of slide, so I guess I need to apply an effect. All the help refers to "clicking the triangle next to the audio track name" to expand the track for editing, then goes on to talk about keyframes. I don't see a triangle next to the track name, or next to anything related to the track. I am in the Effects workspace. Also, on the EFFECTS tab, all the selections are grayed out.
    I also tried adding a fade by using the settings on the PROPERTIES tab, but it doesn't affect the playback.
    How do I apply a fade effect?

    Effects have no relation whatsoever with audio clips, I don't understand why you were looking there.
    You can edit audio, and to get into the editor there are several ways. If this is slide audio, the clip is visible on the timeline and right-click menu has an option Edit. Another way is to find the clip in the Library, and the right-click menu on its name has more options, not only Edit in Captivate, but you can also use another application which I would recommend. The audio editor in Captivate is pretty limited, I'm using Audition, but Audacity is free to use.
    For an easy way to have a fade out (you can time it, not the way of fading like in a real audio editor), you don't even need the audio editor in Captivate. Look in the Properties panel, part Audio and you'll have Fade in and Fade out.

  • In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

    In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
    os x, Mac OS X (10.6)

    I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum. 

  • Aperture - when you have saved a multi-media slideshow and you export it how do you make sure the audio track retains the volume drops that you programme in? I have video clips with audio, which when they play in the slideshow, I fade the audio (music)?

    Aperture - Sorry I'm new to this so this might be a bit long! I put together an aperture slideshow with a backing music track and some video interspersed with photos. When I exported it to put on you tube the audio backing track had not saved the fades that I had programmed when the video clips played. The video clips had audio on them that I set at one volume whilst fading the backing track. these fades didn't save on the exported version. Any suggestions please? Regards, Maxjackpete

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • MultiCam Monitor Bug - mouse clicking dont swap audio track

    "Audio Follows Video" ON
    and "on play" it switch to MC1/2/3
    but on pause switch only video track. And now i have video MC2 and audio MC3 for example. When use CTRL for new edit MC for video and audio are same. And all ok when switch with RMB. This bug only on MC Monitor mouse clicking.
    my englih bad and i make video
    http://www.youtube.com/watch?v=yrLL1MTgU00

    ok in laymens terms I create a multicam sequence using four video tracks and four audio tracks. Normally the start of the sequence would have all the video audio tracks in, however I have started by editing single clips in time line 1. After a min or so I then import all the multicam footage to time lines 2,3,4. So the the actual sequence starts with clips on a single timeline as oppossed to all 4 video and sound tracks filled.
    I multicam edit them in a new sequence and on final go to export but it fails. and it fails giving an "unknown error" message because the start of the multicam only has clips on one timeline.
    However if I go to the synced sequence (original sequence) copy all the single edits at the beginning, then go to the multicammed sequence and paste these clip straight over the same clips in the multicamed sequence it then exports ok with no errors. I have to do this with every multicam edit I do which is a pain.
    now the text above say if I repeat the same process in CS5 not CS5.5 there is no unknown error message and no need to fiddle about copying and pasting so why so in CS5.5?
    I know your gonna say simple just do your multicam in CS5 but my main bought plugins and effects are for CS5.5 including native Canon MXF support and AVCHD support so I need the CS5.5 really. its bugged and needs fixing.
    Better?
    Roddy

  • How to apply FADE to audio track

    Just moved to use Logic Pro 8 that I have the following queries:-
    1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
    2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
    3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track? B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
    Thank you for your advise.

    NNS wrote:
    1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
    You can use the fade tool, or for multiple regions, simply select the regions (you can rubberband them), and use the fade tool box in the upper left hand corner of the arrange page.
    NNS wrote:
    2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
    Look over the extensive list of key commands that are available within Logic. You can also assign alternate tools to left/right mouse buttons, or by modifier keys, so you can switch tools quickly, without the need for accessing the toolbox.
    NNS wrote:
    3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track?
    For mono output assignments, simply pan the mono track to the desired side of the output. i.e., track one, set to "Output 1-2", panned hard LEFT, will only appear on your audio interfaces output 1. Panned hard RIGHT, it'll appear only on output 2...
    NNS wrote:
    B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
    All audio interfaces with SPDIF inputs have those inputs hardwired. So it's just a matter of you reading the MOTU manual, and seeing what that is. It may be inputs 11-12, or 23-24, etc... Just set the stereo track in Logic to have that particular input, and you should be set.

  • Automate to sequence audio tracks bug.

    Hi.
    When you select clips that contain 4 audio tracks, to apply "automate to sequence", only track 1 is added to the timeline. Please, can you fix?
    Regards.

    I think it is important to resolve this because I used to put multiple clips on the timeline, with the overlay option "x" frames and apply audio transition.

  • Bug - Double click to add audio tracks

    Double clicking to add another audio track here results in a track that you can't record to.

    This entry on Patrick Wolf's blog tells you the code you need. Very simple to implement:
    http://www.inside-oracle-apex.com/2008/01/add-double-click-to-oracle-apex-shuttle.html

  • Move Audio everything Mutes - Solo Bug?

    Move audio everything mutes ..... is this the dreaded Solo bug from a few years back? In Logic X?
    Please tell me I'm wrong

    i havent switched to 916 and 917 becuz i read about the bugs... im on 915, and 10.6.8 operating system
    right now my set of bugs are:
    THE MUTE BUG: where if you accidentaly clicked the SCORE window and hit M, there will be select midi notes though out your ENTIRE project that will muted, this doesn't discriminate on which note, nor velocity.. It is truly random, but for the same instrument, each region will have the same type of muted notes. THERE IS NO UNDO. you literally have to sit for about 30mins, to an hour to sort this.
    THE SOLO BUG: This thread.
    "THE TAB TO TRANSIENTS" BUG: Logic just doesn't recognize a transient on some audio! Incredible... I can clearly see it. I have to take into protools to do "Tab to transients" there. Then bring it back!
    FADE FILE ISSUE: when I save as, or save copy of project. There is a -36 error, where either fades arent updated. Also, some audio tracks regions, simply play of an on... as the play head hovers passed them! at this point my session is RUINED. because it will happen on multiple tracks.
    4 bugs are OKAY I guess.... I didn't feel like adding more to this arsenal LOL... now I see some of you understand my gripe. I have reinstalled my entire OS, gotten a NEW hard drive on my mac pro, still same issue.
    Oh, and my favorite bug!!! When I work at 88.2, and Time+pitch a region, the HARMONIC CORRECTION fails! lol
    I am going to update to 917 and tell u if the bug is there.

  • Unable to perform multi audio tracks mixing with Audio Mixer

    How do you get a simple multi track mix with the Premier Pro 1.5 Audio Mixer?
    I got 2 audio clips, each sitting at the start of its own separate track (Audio 1 and Audio 2). I just want to mix them into the Master track.  Simple enough.
    So I go to the Audio Mixer. Position the CTI at the start of the tracks and hit the red RECORD button. The red spot starts blinking. Then I hit the START/STOP button expecting the tracks to start mixing into the Master track. Instead, I get this error message
         "PLAYER ERROR: You cannot record without enabling at least one track for recording."  
    I get the same problem if I try the mix onto a submix track.
    What am I missing? I combed through the Premiere Pro User Guide and J. Rosenberg's Premiere Pro Studio Techniques but to no avail.
    Thanks for any help.
    JB.

    Jacques, I havn't seen 1.5 for a while, so I need to stress that what I'm about to say is more of an educated guess linked to a rough memory.
    Each audio track in the mixer has a small chip (tickbox in 1.5??) that you click in order to enable that track for recording. In CS3 it's a little microphone.
    Having said that, I DON'T think that's going to give you what you want, as the intention of the recording functionality in PP is to record audio FROM AN EXTERNAL SOURCE (like a microphone) straight to an audio track, say, when doing a Voice Over for some video.
    You can't "mix down" to the master, as the master is not a track per se. It's just a "final" level control. The master will always be the sum of the active tracks, and THAT'S what will be rendered in the final output.
    You can still "live mix" your audio with the faders, it's just that those movements get recorded as keyframes on each of the tracks you modify (including, BTW, the Master).
    The advantage to this workflow is that every fader move you make is infinitley editable... a small error when riding the faders can easily be fixed by dragging keyframes.
    HTH.
    Matthew

  • When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

    When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

    In Logic:
    Preferences/Audio Set Recording Delay to 0 <zero>
    This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
    On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number.  It's actually a bug in Logic, as it should always display the waveform.

  • Global changes on an audio track or between in and out

    I've come over from Avid and on Avid I could set an in an out point on an audio track and then changes the values of volume and pan which would then be changed between the in and out points.  I'm editing an interview and the radio mic channel has flipped over to one side and I want it in the middle and cannot get it to stay there.    I know that I can "write" in the audio mixer and just hold it there for hours, but I'm assuming there is a simpler way.  I know about paste attributes but it's not clear what I'm copying and where I'm pasting those attributes.  It would be far simpler if I could just select the audio track, set it the way I want it and tell it not to change for the duration.  Any ideas?
    Thanks

    At the lower left of the timeline, there's a button that looks sort of like an upside down V. Click it- the clip overlays. You'll see red lines appear on your audio tracks. Grab the pen tool. Using it, you can click on the red rubber band lines to place key frames where you want. in your case, click once where you want your audio to begin fading out, then click again where you want the fade to end. On this last point, drag the keyframe all the way down, vertically.
    As mentioned earlier, you can do this in the viewer as well - using the pen tool.

  • Audio tracks move around by themselves after I render!

    I've been using keyframes to alter the volume of audio tracks. When I render the audio, I find that either the track itself I'm working on - or totally unrelated tracks - gets chopped up and in the wrong order, as if somebody had "cut and pasted" different parts of the clip and dumped them down in the wrong place!
    This is extremely irritating and has all the signs of a bug. Is that the case, or am I doing something wrong?
    Please help as I have a tight deadline and was not expecting something so crazy to happen via simple volume editing!
    Thanks.
    p.s. why can't I choose Final Cut Express on the product list?

    You really need to provide the info that Mr. Wolsky requested to get a good answer.
    Certainly the difference is sampling rate is a problem, but to advise you correctly more information is needed - to make sure you are using video with a codec and frame rate that is appropriate for FCE.
    If you are using video directly from a DSLR,, for example, in H.264 at 24fps, then you have additional problems that can cause the symptoms you are reporting.
    If it is to much info for you to type, then select a source clip in the browser and type Command+9, then take a screen shot of the item properties and post the screen shot here.
    Do the same with your sequence.
    MtD

  • When I try to map faders to the volume in audio tracks it only lets me map the "selected track"

    LogicX user. I'm trying to map my mpd32's faders up with four audio tracks to control their volume. For the first three tracks, I can map the faders accordingly, and in the Controller Assignments window, in the "channel strip" section on the right, they all say "fader bank (1-3)", which is correct. When I get to the fourth audio track, and I go through the same steps as I have to map the first three audio tracks, the channel strip section says "selected track: 1" instead of what I thought it would say: "fader bank 4". When I try and manually change that to "fader bank 4", I move the control that I want it to be mapped to, it and the text automatically switches back to saying "selected track 1". I made sure that none of the tracks that I was trying to map were selected before I did this. I'm not new to logic by any means but I seriously need to be able to control these all at the same time for a performance I'm trying to do soon. It is driving me ******* crazy.

    David Boroditsky wrote:
    The problem is that the mac chokes on having 2 identical mics attached at the same time.
    Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
    The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

Maybe you are looking for