Audio Tracks are not linked when imported

I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
Adam

There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

Similar Messages

Video & Audio Tracks are not connected

For some reason my video and audio tracks are no longer conneted. It used to be when I would click on the video track that the 2 audio tracks that match it would also be highlighted so I could move them together, trim them together, etc. but for some reason now all my video clips that I put on the timeline are seperate (1 video and 2 audio) so I have to highlight all 3 lines to have them stay together, and it will not let me trim or apply transitions to all 3 at the same time. Is there a setting for this?

Make sure the "Link" button is on-- it's the small chain at the top right of the timeline, next to snapping. Once turned on, though, your clips already on the timeline may still lack cohesion; if so, select a video clip and the audio clip(s) that you want to link, and go Modify>Link.

Audio tracks are not nesting

So all of a sudden, when I select the audio and video clips and right click > Nest....only the video tracks are being replaced by the nested sequence on the timeline while the audio clips stay intact on the timeline. When I look at the nested sequence all the audio clips have been copied there.

Ok, I'm officially upgrading this bug. Now, in Adobe Premiere Pro CC 2014, when I use the "Nest" command I get the same behavior as mentioned above. Except now when I drag the nest into a time line, it acts like the nest is not there and instead drags all the tracks in (6 tracks). Even if I try to drag a sequence into another sequence, it instead drags it in not as a nest, which is something I definitely do every day in CS6, but instead as all the separate tracks.
At this point, I'm starting to feel a bit like a beta tester on an unreleased product. Just a few more of these bugs and I'm going to have to go back to "last years model" CC until an update for 2014 is released.

Audio and sound not matching when importing

Hello - I've been importing footage from a miniDV from my Panasonic - the footage contains about 10 dance numbers. I had no problems, until I noticed that one of the dance numbers was a little 'off' in Final Cut. I checked the footage again, viewing it on the camera, and it was fine, so I imported again, and the dancing and the music was off even more, yet the video and audio tracks were lined up.
So then I tried importing into iMovie, and that worked just fine! So I had to make a full quality DV from that, and then re-import into FCP. How is it that it's fine on the the camera, but then goes 'off sync' when being imported into FCP, even though all of the other imported dances were fine? Any ideas/suggestions would be most helpful, thank you.

When you say off do you mean out of sync?
There's really a thousand things it could be and nearly impossible to tell with just a post. What version of FCP? What computer? What OS? What kind of drives are you using? What are you settings? How are you viewing? What capture settings did you use?
See lots of stuff. With DV, if it's out of sync changes are you have some kind of hardware issue going on as it doesn't take much computer power to edit DV.

Symbols used in VISIO diagram are not shown when imported to FrameMaker 8.0

I have FrameMaker 8.0 and when importing a visio diagram that includes a symbol, the symbol is not shown in the FrameMaker document correctly. It either is shown as a small box or as a question mark.
Is there a way to work around this issue?

> These symbols are availabe in FM when you insert equations.
Just because the symbols are available in FM in one font doesn't mean
they're available in FM in the font Visio used. This is why Art and
Sheila are asking you about fonts, specifically, whether the font used
in Visio is also available to Framemaker.
Beyond that, OLE is not a stable way to get graphics into Frame (or any
other app, really).
BTW, a German sharp s (ß) is not the same as a beta (β) (which probably
won't make it through NNTP and the forum). They look close, but they're
quite different.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Left audio track disabled in premiere when importing to Audition... Any way to enable?

I'd ask in the Audition forum but I cnanot post there for some reason.
Anyway, I sent a range of clips from my work area to Audition. Made some edits on some clips and realized that I left a track disabled in premiere when I sent them to Audition. is there any way to enable this track now in Audition or am I going to have to scrap whatever I did so far and start a new import with that track enabled?

Source Patching http://forums.adobe.com/thread/1442800?tstart=0
-and a FAQ https://forums.adobe.com/message/6725752

Midi and audio tracks are not synchronised properly?

no problem for a year and then after synchronizing my old Roland VS 880 in order to transfer audio tracks to a new project in my mac all new audio recordings run out of sync with the midi percussion tracks. They move along together but not quite in sync. It sounds as though the guitar parts have been badly played but believe me that is not the case.

Good question. I don't know. If the sampling frequency changed it did it on it's own because I have never even come across that before. I am going to look around logic to try and educate myself but so much time has been lost already I am at my wits end. We couldn't talk could we? Are you with skype?

Audio tracks are not importing into Premiere Pro CS3

I am importing video files but audio does not seem to come attached. I know that the files have audio since I've check iwth other media players. What may I be missing?

Most likely a CODEC that is not designed to be edited
Work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link... For question #1 use the FREE http://www.headbands.com/gspot/

Exported audio tracks are not starting from beginning of track

I have GB '08.
I export recorded podcasts (i actually make language learning CDs using an external mic) so each track ends up at between 20 sec or say 2 mins, to an Itunes playlist. I may play a track, and then click on another, by double clicking as is usual in itunes to start a new track, EXCEPT that it starts the new track at the place it was last time when it was played, even if it is its first time played in itunes, but was listened to some point whilst in garage band.
so the tracks dont start at the beginning of the track but rather where they were left off when last listened too. This happens also on my ipod with those tracks and i have to manually drag a track's progress bar back to the beginning to hear it from its start.
This is a disaster for my product. Is it a bug or is it a setting? Please help urgently.
Many thanks, Craig

Hi christoph, this is one of those headbangers.
the AAC and mpeg or exported as mp3 files both do it, which yes, is totally weird.
So, i can get the context menu, right clicking or cntl click, but what option is there to set it to new, as you suggest.
Thanks for your efforts
:)c
Hey, brother
I just got the solution in another forum. fascinating.
see the link http://forums.macrumors.com/showthread.php?p=7191871#post7191871
its about the "remember playback position" checked in the individual track options in track info.
Nice one.
Auf Wiedersehn.

Audio track edits not saved

I am using Captivate 4. I have a group of files where any edits I make to the audio track are not saved. The audio plays back fine in the audio editor. It just will not save the changes I make to the audio track (cut segments, add silent segments, etc.) I make a change, click OK in the audio editor, close the editor. When I reopen the editor the changes are not saved. I tried uninstalling and reintalling Captivate. I tried saving the file under a different name. Any ideas why this might be happening and if there is any workaround? thanks.

Hi there
You should ensure that Captivate has been updated to the most recent release. The developers released an update after the initial release. Additionally, you may need to follow what is outlined in this blog post. I had to do that on my PC.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

When downloading video into FCP my two audio tracks are locked together.

When downloading HD video into FCP my two audio tracks are locked together. Channel one will not separate from channel two. Not good. One channel is my miked talent, the other abient. Any suggestions? I cannot find the problem. Sequence settings? Preference settings?
Help!

gary Boland wrote:
When downloading HD video into FCP
I think you mean "importing", not downloading.
Downloading is when you copy a file from an Internet server to your computer.
Channel one will not separate from channel two.
Any suggestions?
Select the two tracks and choose Modify > Stereo Pair
Or you can just use the keyboard shortcut option-L

DMS icon disable when documents are not linked

Dear friends,
Our client is having a requirement that when documents are not linked with any of the item no. of Purchase Requisition, then the DMS icon should be disabled, so that user dont have to check each and every item level of PR. If document is linked with any of the item no., then it should not get disabled.
Kindly suggest how to explore this functionality in SAP DMS.
Regards,
Punam

Try doing a Save As on the linked doc and see if that helps. I presume there is no problem accessing the links from the same machine.

Audio Tracks are silent after Narration PE12

Audio Tracks are silent after Narration. Mixer is at 0.0dB on all channels. Audio plays fine when double clicked but is silent when played back on timeline. Narration is fine. Any ideas as to what's happening and how to correct this?

c.s.radiation
What you described is a known issue with Premiere Elements 12/12.1. I have not been able to reproduce the problem which has been encountered by
several. But....
Please read about the fix offered by Llamadude99. That specific fix as well as modifications of it have resolved this problem for several.
http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html
After reading the above link content, determine if it works for you, and then let us know the outcome.
Thank you.
ATR

Audio and video not linked by default?

Sometimes it seems that the audio and video tracks are linked and sometimes they are not, without me unlinking them. I have also noticed that sometimes it seems that I am unable to link tracks back together? Are there common reasons why my video and audio might behave this way?
Thanks.

Tom Wolsky wrote:
You can only link one track of video to up to 24 separate items of audio as long as they are not linked to any other video
AND as long as those audio clips are on seperate tracks.
Clips that are captured with Video and Audio are Linked by default.
You can determine if clips are linked in the timeline. They have an underlined clipname in the Timeline. Unlinked items are not underlined.
Linked Selection can only select linked clips. So if Linked Selection is ON (See luca's screengrab, earlier this thread), then clicking on an underlined audio clip, it's linked videoclip (and other linked audioclips) will be selected.
Now on how clips become unlinked. One example can be when you have a linked clip in the timeline (with 1 video and 2 audio layers) and then you cut somewehere in the middle of the audio portions of that clip, then you'll notice that the left part of the audioclips are still linked to the videoclip (all underlined clipnames), but the right part of the audio clips are unlinked from the video (not underlined. This is because the video can only have a link to 1 audio clip per audiotrack...
Hope this makes sence...
Rienk

Audio Tracks will not play

Hi there,
I'm using FCP 7 for a project that was originally edited in Final Cut 6 (I had to switch to 7 because BOTH my computers at home have crashed today which use FCP6, now I'm up at my office and have to use 7 - bad day, I know).
I'm trying to do some sound edits and only one audio track is playing (tracks 3 and 4) which are the source audio from the XDCAM Footage (note, these tracks have not been soloed - if that's a word). All my other tracks are not working. When played they produce no sound, but the audio meters to the right are moving. When played in quicktime, iTunes, or Finder they do indeed still work.
Audio Output has been set to Default, though I've also tried Built-in Audio Output. I'm using headphones, but it also does not play through the computer. I've also tried speakers. All other audio on the computer is fine - my volume is up.
Sometimes I can get tracks one and two to play after re-rendering.
RT is set to Unlimited, but it also doesn't work with Safe RT.
Any insight into this issue would be much appreciated!
Thanks

Go to Sequence Settings...then the AUDIO TAB. How many tracks of audio do you have? More than 2 and STEREO?
If you right-click on the track patch area on the timeline, you can assign these tracks to audio ouputs...are they set to anything other than 1 or 2?
Shane

Audio Tracks are not linked when imported

Similar Messages

Maybe you are looking for