Audio tracks are not nesting

So all of a sudden, when I select the audio and video clips and right click > Nest....only the video tracks are being replaced by the nested sequence on the timeline while the audio clips stay intact on the timeline. When I look at the nested sequence all the audio clips have been copied there.

Ok, I'm officially upgrading this bug. Now, in Adobe Premiere Pro CC 2014, when I use the "Nest" command I get the same behavior as mentioned above. Except now when I drag the nest into a time line, it acts like the nest is not there and instead drags all the tracks in (6 tracks). Even if I try to drag a sequence into another sequence, it instead drags it in not as a nest, which is something I definitely do every day in CS6, but instead as all the separate tracks.
At this point, I'm starting to feel a bit like a beta tester on an unreleased product. Just a few more of these bugs and I'm going to have to go back to "last years model" CC until an update for 2014 is released.

Similar Messages

Video & Audio Tracks are not connected

For some reason my video and audio tracks are no longer conneted. It used to be when I would click on the video track that the 2 audio tracks that match it would also be highlighted so I could move them together, trim them together, etc. but for some reason now all my video clips that I put on the timeline are seperate (1 video and 2 audio) so I have to highlight all 3 lines to have them stay together, and it will not let me trim or apply transitions to all 3 at the same time. Is there a setting for this?

Make sure the "Link" button is on-- it's the small chain at the top right of the timeline, next to snapping. Once turned on, though, your clips already on the timeline may still lack cohesion; if so, select a video clip and the audio clip(s) that you want to link, and go Modify>Link.

Audio Tracks are not linked when imported

I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
Adam

There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

Midi and audio tracks are not synchronised properly?

no problem for a year and then after synchronizing my old Roland VS 880 in order to transfer audio tracks to a new project in my mac all new audio recordings run out of sync with the midi percussion tracks. They move along together but not quite in sync. It sounds as though the guitar parts have been badly played but believe me that is not the case.

Good question. I don't know. If the sampling frequency changed it did it on it's own because I have never even come across that before. I am going to look around logic to try and educate myself but so much time has been lost already I am at my wits end. We couldn't talk could we? Are you with skype?

Audio tracks are not importing into Premiere Pro CS3

I am importing video files but audio does not seem to come attached. I know that the files have audio since I've check iwth other media players. What may I be missing?

Most likely a CODEC that is not designed to be edited
Work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link... For question #1 use the FREE http://www.headbands.com/gspot/

Exported audio tracks are not starting from beginning of track

I have GB '08.
I export recorded podcasts (i actually make language learning CDs using an external mic) so each track ends up at between 20 sec or say 2 mins, to an Itunes playlist. I may play a track, and then click on another, by double clicking as is usual in itunes to start a new track, EXCEPT that it starts the new track at the place it was last time when it was played, even if it is its first time played in itunes, but was listened to some point whilst in garage band.
so the tracks dont start at the beginning of the track but rather where they were left off when last listened too. This happens also on my ipod with those tracks and i have to manually drag a track's progress bar back to the beginning to hear it from its start.
This is a disaster for my product. Is it a bug or is it a setting? Please help urgently.
Many thanks, Craig

Hi christoph, this is one of those headbangers.
the AAC and mpeg or exported as mp3 files both do it, which yes, is totally weird.
So, i can get the context menu, right clicking or cntl click, but what option is there to set it to new, as you suggest.
Thanks for your efforts
:)c
Hey, brother
I just got the solution in another forum. fascinating.
see the link http://forums.macrumors.com/showthread.php?p=7191871#post7191871
its about the "remember playback position" checked in the individual track options in track info.
Nice one.
Auf Wiedersehn.

Audio track edits not saved

I am using Captivate 4. I have a group of files where any edits I make to the audio track are not saved. The audio plays back fine in the audio editor. It just will not save the changes I make to the audio track (cut segments, add silent segments, etc.) I make a change, click OK in the audio editor, close the editor. When I reopen the editor the changes are not saved. I tried uninstalling and reintalling Captivate. I tried saving the file under a different name. Any ideas why this might be happening and if there is any workaround? thanks.

Hi there
You should ensure that Captivate has been updated to the most recent release. The developers released an update after the initial release. Additionally, you may need to follow what is outlined in this blog post. I had to do that on my PC.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Audio Tracks will not play

Hi there,
I'm using FCP 7 for a project that was originally edited in Final Cut 6 (I had to switch to 7 because BOTH my computers at home have crashed today which use FCP6, now I'm up at my office and have to use 7 - bad day, I know).
I'm trying to do some sound edits and only one audio track is playing (tracks 3 and 4) which are the source audio from the XDCAM Footage (note, these tracks have not been soloed - if that's a word). All my other tracks are not working. When played they produce no sound, but the audio meters to the right are moving. When played in quicktime, iTunes, or Finder they do indeed still work.
Audio Output has been set to Default, though I've also tried Built-in Audio Output. I'm using headphones, but it also does not play through the computer. I've also tried speakers. All other audio on the computer is fine - my volume is up.
Sometimes I can get tracks one and two to play after re-rendering.
RT is set to Unlimited, but it also doesn't work with Safe RT.
Any insight into this issue would be much appreciated!
Thanks

Go to Sequence Settings...then the AUDIO TAB. How many tracks of audio do you have? More than 2 and STEREO?
If you right-click on the track patch area on the timeline, you can assign these tracks to audio ouputs...are they set to anything other than 1 or 2?
Shane

Audio Tracks are silent after Narration PE12

Audio Tracks are silent after Narration. Mixer is at 0.0dB on all channels. Audio plays fine when double clicked but is silent when played back on timeline. Narration is fine. Any ideas as to what's happening and how to correct this?

c.s.radiation
What you described is a known issue with Premiere Elements 12/12.1. I have not been able to reproduce the problem which has been encountered by
several. But....
Please read about the fix offered by Llamadude99. That specific fix as well as modifications of it have resolved this problem for several.
http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html
After reading the above link content, determine if it works for you, and then let us know the outcome.
Thank you.
ATR

"The source and output audio channels are not compatible or a conversion does not exist" - ?

I'm trying to export from Premiere Pro for a f4v file that matches all source settings except resizing the video. I've done this a million times but today, when I hit EXPORT, I'm getting an error message from Adobe Media Encoder that says "the source and output audio channels are not compatible or a conversion does not exist." I'm using wav, mov and mts files in my audio tracks and everything plays happily in the timeline. Any ideas?
Thanks for any help!

Sounds like you unsuccessfully trying to output a 5.1 Master to a stereo or mono file. Or something along those lines.

When downloading video into FCP my two audio tracks are locked together.

When downloading HD video into FCP my two audio tracks are locked together. Channel one will not separate from channel two. Not good. One channel is my miked talent, the other abient. Any suggestions? I cannot find the problem. Sequence settings? Preference settings?
Help!

gary Boland wrote:
When downloading HD video into FCP
I think you mean "importing", not downloading.
Downloading is when you copy a file from an Internet server to your computer.
Channel one will not separate from channel two.
Any suggestions?
Select the two tracks and choose Modify > Stereo Pair
Or you can just use the keyboard shortcut option-L

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I have!

The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!

First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
Patrick

My tracks are not listed in order

my tracks are not listed in the correct order in the library and on my ipod they r playing out of order.

I really don't mean to dodge your question and take this thread in another direction, but I still would like to point out, in case you might not have realized, that iTunes now has gapless playback. That said, it really caps the usefulness of the Join CD Tracks feature. I understand that there may still be good reasons for using this, like if you have an older iPod that doesn't support gapless playback or a non-Apple portable player, etc. Still, I think it's worth mentioning that in the future, as your equipment changes and you can take advantage of proper gapless playback, you may find it annoying that you can't unjoin the tracks in a precise manner.
Join CD Tracks Command Is Dimmed
Joining CD Tracks
Adding songs from CDs to your library
Interestingly, the iTunes 7.x-related documentation says nothing about having to select contiguous tracks in order to use the Join CD Tracks command. I don't use this feature anymore since iTunes and iPod have gapless playback, but if I find that the old rules still apply, I will submit a request to update the newer KB articles.

I just bought and downloaded an album. the album/tracks are NOT found in my music listing alongside every other track i have purchased! however, they are found and playable in the recently added playlist. plz help

i just bought and downloaded an album. the album/tracks are NOT found in my music library alongside every other track i have purchased! however, they are found and playable in the recently added playlist. in addition, when using the search queue in the upper right corner, the artist and album is listed when searched for, but when clicked on, nothung happens. i have downloaded hundreds of tracks with no issue (not a noob), but have no idea what has occurred...plz help

Have you checked whether the songs are in your iTunes library? If they are, then just drag them to your purchased playlist. If they aren't, try checking for available downloads.
If none of the previous work, then get in contact directly with iTunes store support to tell them about your problem.

HT201272 To whom it may concern, This morning I purchased an album, on listening to it three of the tracks are not playing correctly. I read on an apple discussion board that I should delete them and re-download them. This did not work as I was asked to p

To whom it may concern, This morning I purchased an album, on listening to it three of the tracks are not playing correctly. I read on an apple discussion board that I should delete them and re-download them. This did not work as I was asked to pay for them, and one of the tracks was an album only track.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Audio tracks are not nesting

Similar Messages

Maybe you are looking for