Audio Tracks can be Heard but not Seen

I am using Logic Studio 9 and in Logic Pro all the sudden I have had a problem with my audio tracks. When I record the tracks I can see the track audio waves being cut but once I hit stop the track visual go to a straight line with no feature. If I back up the play head and press play I can hear the audio of the track, but not see it. I can even bounce the track and use it in iTunes or WaveBurner, but still I cannot see the track visual info. This just recently started. ANY ANSWERS to this mystery would be greatly appreciated.
Thanks

http://discussions.apple.com/thread.jspa?threadID=2371889&tstart=0

Similar Messages

  • Flash movie in director heard but not seen... mostly not seen!

    Using flash i made a flash movie to use as an intro to my
    director project, I imported the flash movie into director and
    placed it on the stage. When i play the director file i can hear
    the audio from the flash movie but cannot see the flash movie,
    untill right near the end i have an image on a motion tween in the
    flash movie which i can see.
    Can anybody tell me why i cannot see the rest of the flash
    movie?

    Hi Ajrobson,
    I'm guessing you're using Flash 8 and haven't updated
    Director for Flash 8
    compatibility.
    Go to:
    http://www.adobe.com/support/director/downloads.html
    make sure you've downloaded and installed the 10.1 update.
    Then install the 10.1.1
    update. This will update your Flash support.
    regards
    Dean
    Director Lecturer / Consultant
    http://www.fbe.unsw.edu.au/learning/director
    http://www.multimediacreative.com.au

  • Button on video track via subtitles work but not for audio via story

    Hello,
    I have a video track with two different audio (two versions of music). I have created two buttons within a subtitle to have them directly on the video
    if i make a link to the menu, the button work correctly. But in fact i make a link to two different stories, each with the different audio track
    this way it does not work ..
    any idea ?
    DVSP3

    Hey Thierry Arnould,
    You could use scripts.
    Create 2 scripts each with the function "Set System Stream"
    and select the "audio streams" which you want to use.
    Then add as Startscript to the corresponding story.
    hope that helps
    G5   Mac OS X (10.4.7)  

  • TV Out Issue- No display of screen but only the audio sound can be heard

    I have alway being using my iPhone 4 to watch my video/ mirroring by connected to TV (Sony) through 30-pin digital AV adapter, but after the upgrade of software to version 6.1.3 (10B329). During TV out, showing no display at screen but only the audio sound can be heard at background. Appreciated if there could be a update to fix this issue.
    Thank you
    Regards,
    Devil38

    Thanks you. Problem is solved. The cable wasn't plugged in properly.
    In spite of video rendering smoothly, audio started coming only when I disconnected the cable and plugged it in hard.
    Perhaps I was pampering my phone too much
    -3310
    -N80
    -N8

  • Capture Audio which can be heard from speakers..

    Hi..
    I am currently facing a problem in capturing audio which can be heard from the speakers.. i.e. i want to capture audio generated by other applications. Till now I have been successful in capturing audio from microphone using JMF and Java Sound too.. But I fail to understand what capture device should I use to capture internal sound i.e. sound generated by other applications.. pls. help me out regarding this.. Can DirectSoundCapture (capture device) be used to capture such sounds or can it just capture sounds from microphone..? Pls. help me soon.. Thanks in advance :)

    hardware issue read more here
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more hits
    https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

  • HT204380 When I contact someone with FaceTime, they can see me but not hear me.  I can see and hear them.  What am I doing wrong?

    When I contact someone on FaceTime, they can see me but not hear me.  I can see and hear them.  No one has ever been able to hear me.  What am I doing wrong?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
     Cheers, Tom

  • I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone.

    I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone. Txt msg is disabled on iPad. I have no idea what to do. I called the support line that I Pay $9.99 a month for. They told me to delete my iTunes account. Will I lose all my pics on my ipad? I have no music download. I'm getting ****** at this whole thing. And it allllllll started with apples update to the ios7.... I HATED IT. Help.

    What your iPhone using friends label your phone number in their contacts is irrelevant. I don't know who you pay $9.99 a month to but it's not Apple. You can't disable text messaging on your iPad as it is not capable of SMS.
    Do you still have the iPhone? If so, log out of iMessage on the iPhone.
    Try this:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "Edit Products"
    Click on the "X" to the right of the product.
    Click "Unregister"
    Also, try changing the password on your iTunes account.

  • Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

    Missing Pictures.
    Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
    When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
    Have made back up, but unfortunately a little too late. What to do?
    MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • How do I delete an e.mail on my 5s that has a mime attachment,the e.mail can be read but not deleted.

    How do I delete an e.mail  on my 5s iphone that has a mime attachement? the e.mail can be read but not deleted. A message comes up saying that it cannot be moved! The e.mail was sent to me and I forwarded it. The e.mail is not in any other folder in the phone or on my mac. But it might be in my backup to the mac via itunes.

    This is for your protection, its not supposed to be easy.
    You should be keeping a record of all your passwords, security answers, etc.
    Rescue email address and how to reset Apple id sec. questions.
    http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
    If that doesn't work and you can verify the following info, call 1-800-APL-CARE.
    1. apple id username, that is not locked or disabled.
    2. serial number of an apple product registerd in your name
    3. Billing info associated with your account

  • I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

    I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
    Narmin

    I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
    In the title you state.
    From my interanet I can access srvr but not from my home.
    Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
    In the first post you state,
    I can access windows server from within interanet but don't know how to access it from internet.
    Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
    But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
    I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
    And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
    1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
    2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
    There are lots of references to port forwarding in the TC.. eg
    http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
    The things that generally go wrong are firewall on the computer that is accepting the port.
    The ISP doesn't allow connections on a particular port. (not likely in your case)
    The router is behind another router.. double NAT will kill any port forward.
    Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
    IP on the receiving device is not static and so changes.
    Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • I can access Google, but not Gmail.

    Hi guys. I've been having trouble with my internet connection for as long as I've had my Mac (one year). For the longest time, I've repeatedly had to click the icon for Airport and then turn it off and back on again to recover my connection to Google Gmail and Google docs. These are the first sites to disappear, later I have trouble accessing other sites, this is corrected by turing off and then on Airport. But that is very frustrating, and I often have to do it over and over again. Also, I'm puzzled by the fact that my Skype connection is rarely bothered when access to others sites drops.
    I've been reading as much as I can find and trying the airport utility. Clearly I am stupid because things went from bad to worse. Now I can access Google, but not Gmail. I can access most parts of Apple.com, but when I tried to purchase the upgrade to OS 10.6, I couldn't view the page images. I found the same problem on a few other sites. When I tried to access Linkedin, I could get to the login page, but no further.
    In each case, I get the usual message: Safari can’t open the page “https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false& continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fhl%3Den%26tab%3Dwm%26ui%3Dhtml %26zy%3Dl&bsv=1eic6yu9oa4y3&scc=1&ltmpl=default&ltmplcache=2&hl=en” because Safari can’t establish a secure connection to the server “www.google.com”.
    I've tried resetting Airport back to the factory settings. Now all I get is the blinking yellow light - I'm not sure what that means.
    I'm now connected via hardwire, but access is limited to very few sites, such as this one and Google. I can search google, but I can't access gmail. I can access everything on my windows computer through the same wired network.
    Message was edited by: WhidbeyTomas

    I am having this same problem, but it's not related to parental controls. I have to keep turning the airport on and off as well. Here (http://www.mac-help.com/forums/showthread.php?t=9802) is a post I made over at mac-help.. still waiting for a reply.
    What I've noticed is, the DNS is resolving correctly, but I cannot access certain sites. Regardless, I've tried Open DNS servers and still get the same result. It's not a specific browser. Certain sites go down in a few minutes after visiting them. Some go down faster than others. And others don't go down at all. Sites I've had problems with are Apple.com (to make this post I've had to turn the airport on and off continually), Gmail.com, Google.com, while Google.ca works fine.
    A solution would be great..

  • I've set up email on my iPad (talk mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this

    I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

    I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

  • I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    To diagnose problems with Thunderbird, try the following:
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • On a new mail message in Yosemite there is no Send button or icon.  Only a grayed out word that says "send.  I can receive mail but not send because nothing at top of email allows sending

    On a new mail message in Yosemite there is no Send button or icon.  Only a grayed out word that says "send.  I can receive mail but not send because nothing at top of email allows sending.  Please help.  This is true of two .me accounts I have.

    Hi,
    It may pay to send a Screen Shot of the Connection Doctor info.  (see the Window Menu)
    It would seem the IMAP or POP side is logged in bit the out going STMP server is not.
    8:27 pm      Monday; December 22, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for