Audio tracks have no record symbol

When I select an audio track to record, there is no r symbol.This has never happened before.

There are some issues with Audio Hijack app. After updated it, some problems related with Audio System Preferences have gone.
Kuso

Similar Messages

Audio track will not record - picture is fine PE9

PE9 audio track will not record. Tried in several projects - audio gets through to computer - but the audio is not being recorded. Help please.

Hi ATR
Was transferring a client's DVD-R into my Adobe PE9 to do some editing requested by client.
The audio from the DVD was coming through clearly on my computer speakers but when I finished tranferring I stopped recording and discovered the video track was fine but there was no audio track.
Tried recording said DVD into some of my other files on PE9 but same thing.
Since posting my cry for help I uninstalled PE9 and reinstalled it.
This appears to have fixed the problem as I am now transferring client's DVD-R once again.
A quick check after a few minutes revealed the audio track is now being recorded with no problems!
Thanks for your interest.
Kind regards
David

All audio tracks have same waveform in cs5

Dear Friends,
When i import 1080p AVI with 8 different audio tracks in Premier CS5 all my audio tracks have save waveform as that of track no 1. I mean all tracks looks the same though they are different as 5.1 and stereo.
Please help and advice. Thanking You.

I really have no idea what you are doing or what your signal routing looks like, nor do I know how experienced you are with audio software and signal routings in general. What I now think you mean is that you can't monitor your input properly, you cannot hear the signal of the mic? Is that right? Or how did you arrive to the conclusion that none of your plugins work on audio tracks? Have you actually put an audio file on your audio track?
If you want to hear your input +processed through Logics' plugins,+ you need to enable Software Monitoring - just add its button (with a 'muted speaker' icon) to the transport by rightclicking the transport and ticking *Software Monitoring* on the list. Button grey=off, button green with dot in it=on.
Of course the channel strip/track you receive the input on should also have an output selected, or you will never hear anything.

Logic pro 9,record ready has gone for audio tracks,can't record now.

I upgraded from Logic 8 to logic pro 9 back in october,everything was fine no probs.I have come back to record after a month away & now there is no record ready for audio tracks on any page,they're there for instruments & midi tracks.All else seems fine - just can't record! Also is there any way of getting help from apple,can't see anywhere to contact them without paying!! can anyone help with this?,tis the season of frustration....

You have to select an Input device in the Audio preferences. Since Logic 9 you can assign different devices for In- and Output. So make a selection there and everything will be fine.

All of the inserts in audio tracks have stopped working

I do get audio input, but the inserts do not work.
Does anyone know the fix for this?
Thanks,
Murray

I really have no idea what you are doing or what your signal routing looks like, nor do I know how experienced you are with audio software and signal routings in general. What I now think you mean is that you can't monitor your input properly, you cannot hear the signal of the mic? Is that right? Or how did you arrive to the conclusion that none of your plugins work on audio tracks? Have you actually put an audio file on your audio track?
If you want to hear your input +processed through Logics' plugins,+ you need to enable Software Monitoring - just add its button (with a 'muted speaker' icon) to the transport by rightclicking the transport and ticking *Software Monitoring* on the list. Button grey=off, button green with dot in it=on.
Of course the channel strip/track you receive the input on should also have an output selected, or you will never hear anything.

Making Blue Ray with 2 audio tracks-Have a small dillemma

I just made a 90 min program that consists of 12 short movies (each on their own timeline). Audio trk 1 is 5.1. Audio track 2 is stereo. So far so good. When I made the disk and selected play all. Its starts playing. I switch the audio from Audio trk 1 (5.1) to 2 (stereo). When the first movie is done it switches back to trk 1 (5.1) for the second movie. I do not want that to happen. I want the entire program to be shown in stereo. Any idea what I can do to fix this little issue? Thank you.

Yes, Encore has a similar kind of bug when by default the 5.1 track is played for any fresh stream that is loaded.
Could you post a screen shot of the flowchart to show the navigation?
Meanwhile if you want to start by default with the second audio track, you can specify this either in the disc properties or while linking the individual timeline.
If you specify in the disc properties, then the setting will be applicable to the entire project.
For setting in Disc Properties do this:
Go to the disc Properties Panel and change the Audio to the desired track.
For changing the audio while linking the timeline, do this:
Click on the end action drop down and Go to the specify link and choose the desired audio track:
-Ramesh.

Auto create audio tracks in cycle record Logic X without take folder

Is this at all possible?
For audio not midi and I don't wan't to replace the audio each time,I would like to cycle record Audio takes and have Logic create a new track every time it loops-Like it was back in the day I think on Logic 7-without packing into a take folder.
I know it might just take getting used to but I cannot stand take folders
Please let me know if this is possible!
Thanks in advance
J:-)

Logic does have multi channel record ability, you just record arm the multiple instrument or midi tracks you want, and it'll play/record what ever is armed.
On the record till end of cycle and then move to a new track, I hear you, but you can't do it, logic used to make a new track at the end of a cycle when recording, but nowadays it sticks everything in a stupid take folder and there's no way ( that I've found ) of turning it off. Take folders have their uses, but not for every application.
I can't believe that Apple have have built a loop recorder that'll let you build up multiple parts ( like you're suggesting ) into Mainstage yet they haven't built this into logic. Maybe they will in the future, who knows. I hope so.
So yeah Christian if you want to build up loops as a performance, it's all there in Mainstage. It's called loopback by the way
There's a demo of it here (under live performance)
http://www.apple.com/uk/logicstudio/whats-new/

Audio tracks hissing when record enable is engaged

Hi guys. I am having a big problem with hissing when record enable is engaged. I've discovered that when I click off software monitoring the hiss goes. But then I cant add effects like reverb for singers who want to record with reverb whilst they're recording. It shouldn't be the case, but any enlightenment and I would be grateful. Thanks.

There are some issues with Audio Hijack app. After updated it, some problems related with Audio System Preferences have gone.
Kuso

Slowing down an audio track like a record

Is there any way to edit a music track to graqdually slow it down like a vinyl record slowing down to a stop? Finding a sound effect like that is not as easy as I thought it would be.
Thanks!

Eh. Segmenting wouldn't be a very smooth sound. I did think of that. However, since this clip only needs to be something like 3 seconds, it's kinda impractical.
I was hping not have to get into a new program just for a brief effect, but I may have to.
I went over the freesound.org, where I thought, "Surely, there's an effect here", but srprisingly, there is not. But they did have a couple of solutions on their forum, so I'll probalbyl give them a try.
http://www.kvraudio.com/product/tapestop_by_tbt
http://www.kvraudio.com/product/tapebrake-by-wok
http://www.kvraudio.com/product/scratch-it-by-z3-audiolabs

Why I have to mute Audio Voice Recording Track always in order to subdue the voice recorded when I want to solo other tracks, audio or midi for listening.The other audio tracks don't sound without being muted. Please advise how to deal with this .Thanks

Why I have to mute the Audio Voice recording track ( the first voice track ) always in order to sudue its recorded sound while I want to listen to other
tracks ( either audio or midi tracks ) in solo ?The other audio tracks with voice recording do not have to be muted in order not to interfere with other
tracks turned on solo. Can someone kindly explain this phenomenon and any way to fix this ?
Thanks
Dan

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

Is it possible to lock an audio track in "record enabled" mode?

Here's how i write... i set up a drum loop to play for around 20 minutes, then I rec-enable one audio track to record vocals, and then finally, I skip around among hundreds of different midi tracks.
I just hit the down arrow button, and scroll through dozens and dozens of midi tracks. I quickly hit the keyboard to listen to the sounds. If i like a particular sound, i just want to hit record, and instantly record my vocals along with the midi performance.
Unfortunately, when i hit record, the vocal/audio track doesn't record. Right at the moment when i find an inspiring sound and hit record, the vocals just don't record.
I'm forced to scroll miles up the arrange window, to find
the vocal audio track. It's still blinking the red "rec" button, but this is misleading. It's not actually record enabled. I have to hold down shift, hit it once to turn it off, then hit it again to re-activate record function.
Only then can i record the midi AND vocals.
What I want and need is sooooooo simple to offer as a function, yet totally ruinous to my creative flow if it's not possible. (I used to do this easily on the far inferior
Cubase VST 5.1, OS 9)
Is there a way to record enable an audio track, so that,
until I specifically disable the record function, it's
ALWAYS ready to record the second I hit the record button?
Even after I've been hitting the down arrow to audition
various midi channels?
MacPro 3ghz, 8 gig RAM, 3 raptor drives Mac OS X (10.4.10) Logic 7.2.3, Kontakt 2 soft-sampler, RME 400

I tried to build screensets like you suggested. If I could
get this to work, I think it would be a great solution, but
I'm having serious problems.
I opened a separate mixer, with just the single vocal/audio
track showing.
Then I opened the main mixer, which has all the faders.
If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
track.
A big problem is, that when i click to record enable the
vocal track, the arrange window jumps all the way up to the
top, where the audio track is. THen i'm forced to travel
down, to re-find the midi track.
You mentioned in your post that the mixer needs to be
"unlinked". HOw is this done? Will it be possible for
me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

Logic pro 10 - recording a midi instrument as an audio track

In my Logic 10 song I have a midi instrument that I want to record as an audio track. I can find no way to get the signal from the output of the "harmonica" track to the input of the audio track, apart from recording it using the external speakers. It must be simple to do, but Apple help is no help. Can somebody please help?

Use "Bounce Track in Place".
http://help.apple.com/logicpro/mac/10/#lgcp8aa3b784

Recording on Multiple Audio Tracks

Hi,
For some strange reason I can not arm more than 1 audio track to be record enabled. I try to hold shift but it does not work. I am trying to do this within the arrange page.
I just want to record my syth on 1 track and output of the effect unit it is running through (100% wet) on the next track.
Can someone please help. I would like to be able to record enable about 8 audio tracks in a row and record all similtaniously.

The basic idea is that an input can only be recorded on one track at a time. It's not possible to have multiple tracks record the signal from the same input.
Let's say all of your audio tracks are set to mono. While it's possible to set them all to input 1, Logic won't let you go into record on more than one track.
Let's say all of your audio tracks are stereo. It's possible to set them all to input 1/2, but again, Logic won't let you go into record on more than one (stereo) track.
If your setup is like StaSh wrote, you can record multiple simultaneous inputs.

Maximum audio tracks per recording

How many audio tracks can be recorded together in one recording session?
I use a Macbook Pro 2012 Version
HDD 500GB 5400rpm
RAM 4GB

Yeah, you're not going to get anywhere close to that using your 5400 RPM system drive. I use a LaCie 7200 RPM drive over FireWire 800 with great results. If your machine supports it, consider getting a Thunderbolt drive. In any case, recording to the internal system drive its the least desireable option.
Also, the number of tracks that you can record at one time depends upon the capabilities of your interface. Playback is more dependent on your disk speed and bus bandwidth. In other words, if you have an 8-channel interface, the max number of tracks you can record in any single pass is 8. Typically, you'll be able to playback a lot more than that, even from your internal drive.
It's always good to experiment on your own when there's no pressure.

No audio output on record enabled audio track

Hi guys,
Not sure whether anyone else has encountered this issue with Logic X. When recording using an audio track once the record enable button is selected I am able to see input but the input doesnt go to any output so I am unable to monitor what I want to record. Once I record I am able to hear what I have recorded on playback. The issue has nothing to do with my audio interface as it does the same thing with the built in audio and output.
This problem doesnt exist when using audio instruments and it seem to have just started randomly.
Please help!
System spec
OSX 10.8.5
Procesor: 3.4 GHz intel Core i7
Memory 32 GB
Logic 10.03
Audio Interface: M-audio project Mix

I think this might help the discussion. I also have auto input monitoring selected. I can also hear the audio when I click the input monitoring button.

Audio tracks have no record symbol

Similar Messages

Maybe you are looking for