Audio tracks missing when doing automate to sequence.

Using PMW200 with 4 audio tracks. When dragging single file to timeline I get the 4 audio tracks. But when I do an automate to sequence, I only get 1 audio track, plus, the default audio transition is not going on.
I have all the tracks highlighted and have ticked apply audio and video transitions.
Any idea where I'm going wrong? Thanks
Mike Ward

Hi Kevin. I uploaded a clip onto you tube for you to try, but you tube mixed the audio tracks so it was useless.
Basically, drag any video clip with 4 audio tracks recorded from camera onto timeline in cs6, and all audio tracks appear on the timeline. But automate several similar tracks to timeline and only one audio track gets added. The other 3 do not appear. Is there a work around for this, rather than dragging all on one at a time.
Thanks

Similar Messages

Audio transitions missing when combining sequences - Premiere CC 8.1 Caravan

Audio effects not following when one sequence is pasted into another - Premiere CC 8.1 Caravan
When I finish sequences "A," "B," and "C," and I wish to make a new sequence (sequence "D") that has parts of sequence A, B, and C, I load any of the three sequences into the source monitor and then use the insert/overwrite to paste into sequence D. When playing A, B, or C in the source monitor, everything sounds fine. When I insert (or overlay) those segments into new sequence "D," audio transitions (such as exponential audio transitions to fade in/out music) are missing. So on sequence "D," any audio transitions from sequences A, B, or C do not follow.
I just confirmed that this problem does not exist in Premiere CS6. All audio transitions follow from one sequence that is pasted into another.
In CC, I re-created the problem by putting an exponential fade in and fade out on a clip of music on sequence A, and it works just fine. I then pasted that sequence into sequence D. At the point of the transition, the music does not fade in at the beginning, but just stays muted until after the fade-in transition, then pops in full. Then at the fade out, the audio does fade, but it is full of digital static.
I did this same test in CS6 (same machine) and everything works fine. All transitions and effects are perfect.
I just noted this the other day when creating a highlight sequence of a documentary we are producing. I noticed that sound bites were cutting in abruptly. This is a serious problem.
Can anyone else recreate this issue?

Hey KMueller - neat thinking.
Before reporting - I did try the drag / drop, then the import, then the media browser options and they all ended up the same.
Using your idea, I just straight forward made a copy / paste of the file in the folder it sits in, then dragged that over and hey presto - it came in with audio...
The icon representing the original file says video only still - but the icon representing the "copy" of the same file has a video & audio icon - and it plays ball on the timeline.
Thanks
Dave

When I automate to sequence I get no audio transitions.

I am working with clips from my Sony PMW-200. When I automate a bunch of clips to sequence the video transitions are there, but no audio transitions. I have been using Premiere Pro for years and this has never happened to me before.

When Premiere is acting weird: reboot computer then hold down shift+alt while opening Premiere.
See if that will help.

Audio track missing on timeline when I insert clip from source monitor

I have the following problem with PP CS6: my media contains two alternate mono tracks (one with the signal boosted as an insurance) and I have PP set up to treat them as two mono tracks, rather than one stereo track. Everything works fine when I drag media directly to the timeline from the project panel. But when I use the source monitor to select in and out points, and then insert the chosen clip into the timeline, only one of the two audio tracks appears on the timeline. Can anyone please explain how to make sure I get both tracks on the timeline via this route?
Thanks
DM

Hi Jim,
Thanks for replying. Unfortunately this doesn't apply to my case. I've set PP's default behaviour to import as dual mono in Edit\Preferences\Audio. This allows me to drag media from the project panel to the timeline and get two sediscrete mono channels. My problem is that when I go the source monitor route, any clip that I insert does not display two audio tracks on the timeline, just one. I have discovered I can switch the source channel from left to right, which to all intents and purposes fixes my problem, but I would like to maintain the option of getting both channels displayed separately on the timeline if possible.
Thanks
DM
Sent from my iPhone

How can I keep one of my audio tracks stationary when syncing multiple tracks?

I am trying to edit a video that has external audio from an H4N recorder and internal audio from 2 Canon DSLRs. The internal audio is just there to help my sync everything and will be muted during output. From the H4N I have one long, continuous recording, but from the cameras I have shorter clips, not all of which happened exactly after the previous one.
Here's the issue I'm having: when I sync the two video clips & the external audio early in the timeline, everything lines up (using the automatic synchronization based on waveform). However, when I am syncing clips later in the timeline, sometimes Premiere chooses to pull the external audio track FORWARD (thus bringing it out of alignment with the earlier video), rather than pushing the video tracks BACK (which is what I need).
Is there some way to tell Premiere which tracks should and should not be moved during sync? If I lock the track, then I cannot use the sync function on it at all. I basically need a way to specify that one track should be used as the "anchor" and that others should be moved forward or backward as needed, without moving the "anchor" track.

Cut up the 4n audio clip and synch it to its respective clips.

In GB, I need to insert an audio track. When I try, it obliterates part of the adjacent bridge (track). How can I insert an audio track in an audio timeline without stepping all over clean material? Is it possible to recover the "clean" track bridge?

Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"

Undo what?
Insert in a new track?
I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
Any suggestions you might have would be appreciated.

IMovie: Some parts of audio is missing when export?

When I play it inside iMovie, it works.
But then when it is export, either to iTunes, YouTube or MP4 format,
some parts of the audio is missing.
What should I do?

Looks like the 8.0.4 update to IPhoto may have broken its "share to iDVD" and Export functionality. There are a few Apple.com discussions on this topic.
I found that if I chose "Play each slide for a minimum of x seconds" and altered the duration of showing some slides, the audio would be missing when I exported the slideshow to iDVD.
However, using exactly the same music track from iTunes, if I chose the option to "Fit slideshow to music" then the audio worked perfectly when I exported to iDVD.
Dear Apple, can this please be fixed?

What is going on?! Audio track missing!

I have a bunch of videos that were originally taken on apple devices, uploaded and redownloaded from youtube as MP4's. Some of them work just fine, however some of them are doing something really weird. When i drag the file in, only the video track appears. There is no audio track, however I still hear the sound! Here is a video that shows what is happening. Any insight would be welcome!

Try source patching.

Audio tracks missing in the timeline viewer

Hello,
I am using Imovie 4.0.1 and have been working on a project for several months and now towards the homestretch, I have lost the ability to see the audio tracks that I added to the project. I am referring to the 2nd and 3rd tracks on the timeline viewer. This isn't a killer as I have completed all of my editing and am ready to export it to my camera (to then reimport, seperate audio, and then lock--to make sure audio and video matches up) The problem is that when I export to the camera, the audio comes and goes, and some of the video stutters at times. It seems that this all might be related. Has my imovie become corrupted? All of the projects that I have worked on in the past--that are still on this computer--exhibit the same thing i.e. I can't see the audio tracks and the editing arrows (and other items) have disappeared from underneath the viewing area.
I would appreciate any help.
jg

com.apple.imovie3.plist is what you should have found because you are using imovie 4.
And, a new .plist should have been made by imovie when you re-launched it-so that's OK.
Sounds like you have enough HD space...are you sure you are using the Timeline viewer and not the Clip viewer?
The Clip viewer looks like this:
And the Timeline viewer looks like this:
(But these are screen shots from imovie 5 so don't let that confuse you).
Sue

Audio tracks missing from footage

I was working on a project in the trial version using some footage I shot, and after I switched over to the full version, the audio tracks had completely disappeared. Moreover, much of the footage is listed as 'media offline' in the project itself, but when I reinsert the footage in a new project, it works just fine (except for the audio).
Please help!

Audio Tracks Disappear When Zooming on Timeline

It's very strange, but whenever I zoom in on a certain portion of a timeline I'm working on, audio tracks warp, change, duplicate, or disappear altogether. See below for a video:
Does anyone have any idea as to what this could be? Thanks in advance for all and any help!

It's actually a feature film I've been working on for quite a while – most likely several CC versions back, maybe even from CS6 – sorry I can't remember off the top of my head. Could that be what's causing it? Is there any fix? Or do projects that have been upgraded several time throughout CC update history always have this issue?
Thanks in advance for your help!

Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"

hi,
I'm on the https://helpx.adobe.com/creative-cloud/learn/start/premiere.html page trying to work through the Create a sequence or timeline and add audio tutorial
And cannot see the Video & Audio, as shown in the bottom right sub-window
I'm using a trial version of Premier pro CC downloaded yesterday. On my mac mini running 10.9.2
does anyone know how to fix this problem?
thanks
david
I am able to hear the audio.
Message was edited by: spottedsilvertabby

Hi,
Error 7 is when a router or the connection to the router is broken in some way.
Some devices have features such as Denial Of Service protection (DoS) that cut a particular Internet Port when it thinks too much data is coming (Presuming it is an attack.)
iChat 5 in Leopard is not capped by the System Preferences > Quicktime Streaming speed (which we used to suggest was set at 1.5Mbps)
It now sees your whole Connection speed and your Upload may be much faster than this.
Your Download is likely to be much faster. However iChat will tend to operate at the lower figure of your Upload.
DoS features are threshold based.
You may now be bumping in to this Threshold where you were not before.
SPI (Stateful packet Inspection) does a different job but has the same effect when it is overloaded by the speed of the data.
If you have either of these features, turn them Off (Disable them)
7:25 PM Friday; October 2, 2009

Sold-To Party and Reported missing when doing Help - Create Support Message

Sorry, I know this has been asked multiple times, but I'm missing something in the responses. The responses I am finding either don't seem to apply to my situation, or aren't detailed enough to explain what I'm supposed to be doing.
Solution Manager 7.0 EhP1 SAPKITL435.
If we try to do a "Help - Create Support Message" from within our production Solution Manager system, the "Reported by" field is correct, but the Sold-To Party is blank.
If we try to do a "Help - Create Support Message" from within our non-production Solution Manager system, both the "Reported by" and Sold-To Party fields are blank.
If we try to do a Help - Create Support Message" from another SAP system whose RFC is pointing to our non-production Solution Manager system, both the "Reported by" and Sold-To Party fields are blank.
I've looked at IB52, as well as the SPRO activities under "Partner Determination Procedure." I think a big part of my problem is that they just don'e make sense to me yet, because I can't figure out what I should be changing.
For example, IB52 looks to me like it only applies if you want to assign something to the same person all the time. Am I missing something there, or is that an answer to a different question?
I also can't figure out if I need to create something new in "Define Access Sequences," or modify something existing, and, if I modify, to what?
Does anyone know where I could find specific instructions for setting this up?

Hi Brenda,
Regargind this issue, please check if Sold-To party is maintained for
your system with IB52 in your solman system as the steps below:
SOLUTION MANAGER system
->IB52
->select the system on left hand side
->click on 'goto' on top menu
->Select 'partner'
->Now maintain Sold-To party
Also check below note:
1165357 Sold-to-Party is not assigned to Service Desk messa
As you said ou already assigned then i would request you to please check if you have assigned at the system level or not. Somtimes people define at top of the tree and also at system level. Please assign at system level and delete all other. Most of the times this is the issue Sold-to-party doesnt fill automatically.
For reported by field:
Please check the note: 824640: Customizing missing for Service Desk in Solution
read this note carefull and this will help you fixing the reported by issue.
Please, make sure you have applied the following corrections:
1439191 Incident Create: Message Reporter or Processor is not saved
1486132 Incident Create: Enhance search help of Reporter field
1497700 Work center: Message details not updated after refresh
After this if you still having issue you need to provide more details but i think this will fix the issue.
Thanks
Regards
Vikram

Stereo audio tracks missing - have mono track only

After recently downloading DV footage, I find that there is only a "mono" channel shown on the timeline. Several subsequent "test" takes and downloads continue to produce only the mono channel. Imported "aiff" files appear in timeline with stereo tracks, but material from my DV camera continues to only contain a single mono track. (All settings on camera have been checked and re-checked and appear OK)
Is there some setting in FCE HD that needs to be re-set? If so, where is it??
Any input/advice will be appreciated.

After recently downloading DV footage, I find that
there is only a "mono" channel shown on the timeline.
Several subsequent "test" takes and downloads
continue to produce only the mono channel. Imported
"aiff" files appear in timeline with stereo tracks,
but material from my DV camera continues to only
contain a single mono track. (All settings on
camera have been checked and re-checked and appear
OK)
Is there some setting in FCE HD that needs to be
re-set? If so, where is it??
Any input/advice will be appreciated.
"Mayday, Mayday" ! I've had my camcorder bench-checked for the stereo audio signals (it's operating fine), replaced the firewire cable between the camcorder and the iMac, and reloaded FCE HD. Test clips still show only a "mono" channel for audio - no stereo audio. Test clips made with a different camcorder produced the same results (mono channel only)
After downloading yet another test clip, the FCE HD software responds with the following message:
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape"
Is this why I am only seeing one (mono) audio channel ? Can anyone tell me what this means and how I should fix it ?

Audio is missing when I export longer mp4s from After Effects File via AME. Can you help?

I’m using After Effects to colour correct and add some titles to long .mov files. (typically 45 mins to 1.5 hours in length).
I am then rendering out to the Vimeo 720 25 preset (.mp4s with h.264) using AME.
The problem occurs when I try to render out larger compositions (anything over an hour).
I start to get audio issues, such as no audio, glitchy audio or audio that only starts after 40 minutes for example.
The shorter compositions work fine. And RAM previews always work fine.
(I’m using Creative Cloud on an iMac running Mountain Lion.)
Has anybody experienced this bug, or know a way to fix it?
Thanks

Hi,
I tried to reproduce this issue by adding a shape and a table in Publisher, export it as an index.htm file, copy and paste the HTML code which in the <head>
tag and <body> tag only.
It turns out that the original design is gone.
When digging into the HTML code, I found that the HTML code from Publisher might not be compatible with SharePoint page.
For example, a shape which is added in Publisher, the corresponding HTML code would be something like:
<span style='
width:228px;height:231px'><img alt="shape here" width=228 height=231
src="index_files/image296.png" v:shapes="_x0000_s1026"></span>
We can see that, the value “src” attribute of the <img> tag represents a relative path which can’t be found in the existing SharePoint site structure, it means
that the shape will not appear in SharePoint page.
In Publisher:
In SharePoint page:
As a common practice, I would suggest you create a new HTML file using Visual Studio or SharePoint Designer and examine the design in browser during the development,
it would be easier to compose a valid and browser-compatible HTML file.
Two articles below about tips on how to write good HTML for your reference:
http://learn.shayhowe.com/html-css/writing-your-best-code/
http://sixrevisions.com/web-standards/20-html-best-practices-you-should-follow/
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Audio tracks missing when doing automate to sequence.

Similar Messages

Maybe you are looking for