Audio Tracks on my iPhone stopped working post upgraded to iOS 5.

Audio Tracks on my iPhone stopped working post upgraded to iOS 5.
Quiet a lot of my tracks do not play on my iPhone 4 after I upgraded to iOS 5. The the seeker bar does not progress and it looks stuck.
Could someone please help.
Regards,
S!d

Hi !
I am currently having the same problem, since I upgraded my iPhone 4 to iOS 5, many tracks don't work. They were working before. Some are working but half isn't.
Tried to restore, remake playlist, delete every tracks et put them back. Same prob.
Please help !
Regards,
Rom

Similar Messages

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Location services is stopped working after upgrading to iOS 5

    Hi, Location services is not working after upgrading to iOS 5. How can i switch it on?

    Try resetting the iPod.  I had to do that to get my iPod to show via FindMyiPod.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • Iphone file browser stopped working after upgraded to IOS 5

    Hi,
    I have an iphone 3gs which I have recently upgraded to IOS 5. But to my horror after I have done that I can no longer browser my iphone's internal storage. Iphone connected to PC via USB, the file explorer no longer available. It can still sync with itune fine but there is noway I can access the storage locater in the phone via file explorer like I used to. Mind you I still have 3GB of space there.
    Is that a bug? Or I stuffed up the upgrade some where?
    Anyone else had this experience?
    Alex

    I know whats wrong now...
    My phone had been emptied after I last restored it, after I took a picture and insert the phone back to the PC. The file browser shows up again...
    That means if there is nothing in the phone, the file browser wouldn't be too bother to even show up. Weird one...

  • Keyboard shortcuts stopped working after upgrading to iOS 7

    Does anyone know how to make the keyboard shortcuts start working again in iOS 8? After I upgraded to I OS 8 on my iPad air, the keyboard shortcut stopped working. Is there anyone who knows how to make this work again? All the fixes online pertain to iOS 7 and earlier, and they're not applicable for iOS 8.
    Hope someone can help!
    Thanks!

    I lost all my keyboard shortcuts on my iPhone 5s after upgrading to iOS 8. They still showed up on my iPad Air (iOS 8) and iMac (10.9.5). There were, however, massive sync problems, sometimes they would only flow from one device to all the others, sometimes from one device to only one of the other two, sometimes not at all.
    I deleted all my shortcuts and started from scratch, deleting “~/Library/Application Support/Ubiquity”, ~/Library/Dictionaries” and “~/Library/Mobile Documents/com~apple~TextInput” from the iMac and KeyboardDomain from my iOS devices.
    Rebooted everything a dozen times.
    Toggled Documents & Data Sync off and on a dozen times too in all kinds of combination with rebooting and deleting the aforementioned files.
    Everything always starts working and syncing fine for a very short while, but sooner or later one of my devices stops receiving new shortcuts as I re-add them.
    I reboot that device and it catches up. I enter new shortcuts, and that device doesn’t get any new shortcuts. This time, a reboot doesn’t fix anything.
    After using my devices for a while, I notice shortcuts are entirely gone from both the iPhone and iPad, but not from the iMac.
    I even upgraded my iPhone 5s to a 6, and right off the bat it had issues with keyboard shortcut sync. I also setup my iPad as new, and same thing: right off the bat, sync issues with keyboard shortcuts.

  • Why has my licensing stopped working after upgrade to ios Yosemite

    after upgrade to IOS Yosemite, licensing for PSE has stopped working.  error code 150:30.  Any ideas what I should do

    Hello Jarcel,
    If you are not able to access the cellular network on your iPad, I recommend reviewing the steps in this article:
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPhone stopped working while updating to ios 6.

    It won't turn on and doesn't show up on iTunes when connected.
    It was fully charged. I tried holding the home and power button simultaneously for upt to 20seconds but nothing happened. HELP!!!

    So, my home button has been working fine for the past few days.
    Simply plugging it into the computer and doing a regular sync seemed to do the trick.
    Like the original poster, I upgraded to IOS6 over wifi and immediately started having problems with the home button being slow or not working at all.  I plugged my iPhone 4 into my Mac with the intent to either restore to a fresh IOS6, or fall back to IOS5 if that didn't work.  I let it sync one last time, but that took a while and I had to unplug and run off to work before doing any kind of restore.
    And somehow the home button has been fine ever since (knock on wood).
    So, if anybody is having the same problem, and you normally sync and upgrade over wifi, just try plugging it into your computer to see if it works for you.

  • Why has my music controls in the locked screen stopped working after upgrading to ios. 7.0.2?

    I cannot pause, advance track, etc with the in-control feature on ios 7. When my phone is locked and the music is playing, (ie. iTunes, podcasts or any other audio enabled app) the play controls do not work even when I access the in-control feature.  I remember this working after I updated. Now it's not. Anyone else had this issues or know a fix?

    I have the same issue. with iphone5 with iOS 7.0.2

  • Chrome stopped working after upgrading to IOS 6

    I updated my iPad 3 to IOS 6 and Google Chrome disappeared.  I downloaded the updated version and can select it for sync in iTunes,  the graphic shows the icon being placed on panel like any other app, but whe the sync is done, the icon is not there.  Uninstalling deosn't seem to help.  I even re-loaded the iPad with a fresh copy of IOS 6 and resynced.  Am I the only one having this problem?

    I have the exact same issue. I installed iOS 6 on my new iPad yesterday. When I open iTunes, it opens as blank white with black bar at top and rest white blank. My WiFi and everything else is working perfectly including Siri. I have tried rebooting the iPad. I have also downloaded a free app and installed it successfully from the App Store. I have tried re-setting the router and switched off and on the WiFi. The problem still persists. I have also searched the web for a way to re-install iTunes, but haven't found anything. Does anyone know of a solution? Please help as I would like to use iTunes.

  • Opening web pages in email has stopped working after upgrade of ios

    I cannot open web pages in email, or indeed even scroll them. only change recently as upgrade to ios 7. I can come out of mail and open in safari, but very annoying!!

    replicate the error and paste the error from defaultrace from server0\log.
    regards,
    snehal

  • I have an iPhone 4s.  After upgrading to iOS 6 (and 6.0.1) my sound occasionally just stops working and I have to power off/on to get it back working again.  Anyone else having this issue?

    My sounds occasionally stops working after upgrading to iOS 6.  Is anyone else having sound issues with iOS 6 or greater?

    I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back. 

  • Find my iphone stop working, why?

    Hi, guys
    I recently noticed that my app find my iphone stopped working and i could like to discover why?
    It was working with no problem until i tried to test for it. I've checked all the configurationand everything seems fine!
    I also test the app on a ipad friend to see if the problem was from de apple service but it worked. So i guess its something with my phone.
    can anyone help? My location is Portugal
    thanks

    ÜberMacHead wrote:
    Who is right? Is her iPhone now "hers" or can her boyfriend track it too?
    It's her phone, and no, her boyfriend cannot track it unless he knows her Apple ID & password.

  • My IPhone stopped working right after I did the most current update, yesterday.  The screen has a picture of the usb cord, pointing towards the ITunes logo. I cannot use the phone at all.  I have tried turning it off and on.ITunes won't recognize device

    Hi there,
    Can someone please help.  My IPhoneS stopped working right after I did the latest update which was yesterday.  Now, the phone does not work at all.  When turned on, the screen shows a picture of USB cable pointing to the ITunes logo.  I have tried just about everything, and cannot get it working. It's like it is frozon.  My ITunes does not recognize my device.  Cannot dial out either. I desperately need to get it working.  Can someone please help me. 
    Thanking you in advance for your help.  :-)

    The update did not do anything.
    AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
    The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
    Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.

  • Using a first gen iPad.  Video and audio from internet sites simply stopped working all of a sudden.  Any suggestions?  Thanks.

    Using a first gen iPad.  Video and audio from internet sites simply stopped working all of a sudden.  Any suggestions?  Thanks.

    1)access the router web ui
    2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
    3)do a power cycle
    4)check whether the router gets an internet ip add now ..

  • After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly.  Is there a fix/test.

    After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly. 
    What I get is a RED exclamation and "Not Delivered".  It happens even if i resend it over and over.
    I have made sure that the 3 devices all have the same settins in iMessage.
    I have made sure to try doing it from the same network and from the cell provider network.
    I have tried rebooting all three devices.
    The only way to get it to work on my iphone and iPad is to dissable it in Mavericks on my MacBook Pro.
    Is this a "feature" of the new OS?

    Hi,
    On the iOS devices remove the Apple ID.
    Set the device in to Airplane Mode (this breaks with the server)
    Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
    The Restart the Mac Version
    Accept the pops ups that state what the iPhone  is using.
    Do same on iPad.
    8:31 pm      Wednesday; April 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for

  • Asset Dep run

    HI Guru's, I migrated Asset as at 31.07.2008 using with AS91 Capitilazation date is  9.11.2006 Cost of the asset 17871.00 Accum. Dep   1299.42 upto 31.08.2008 Current Year dep: 1299.59 ord dep. 288.76  from 01.04.2008 to 31.07.2008 using with OASV po

  • Windows 8.1 clean install in GPT hard drive style without loosing the RECOVERY partition

    Always i try format my windows partition, i get the following error: Windows cannot be installed to this disk. The selected disk is of the GPT partition style. So i would like a clean install Windows 8.1 without chnage the hard drive style or loose m

  • My JSP can't find a class file

    Hi I am trying to view a JSP but I get ClassNotFoundException. I know that it means that it can't find the class but I can't understand why. my directory structure: Intranet->source ->jsp ->WEB-INF->classes->source-><class file here> first line of .j

  • Camera Raw 7.1 Patch

    I am trying to install the 7.1 patch but the error says that i need administrator privaledge. it is a school machine that i have installed the trial version to, but I been set up by the tech with full administrator privaledges.

  • Solaris upgradaion from 6 to 8

    Hi , can any one help me to proceed solaris 8 pre upgradation and post upgradation rules to be performed . Thankx for the help. konda