Audio tracks to Lightroom slideshows?

Got it handled when running locally, but is there any way to export audio file(s) with a slideshow from Lightroom to the web? Thank you.

No. Slideshows only export as PDF. If you're creating a Flash web gallery using Slideshow mode then try this:
http://blog.bluefire.tv/?p=38

Similar Messages

Multiple Audio Tracks in a slideshow

I would like to add multiple parallel audio tracks (e.g. language tracks) to my slideshow. Is this possible or do I need to resort to Premiere create first a slideshow and then add the tracks in encore.
Thanks

The slideshow editor will only allow a single audio track. if you want multiple audio tracks, use a timeline.

Is it possible to have a secondary runway without main track in a slideshow?

Is it possible to have a secondary runway without main track in a slideshow?

Do you mean, if it is possible to have only secondary audio tracks in a slideshow without a main audio track?
Yes, you can add multiple secondary audio tracks, without adding a main audio track.
Regards
Léonie
see: Adding Music and Audio to Slideshows
for how to add secondary audio tracks and adjust them.

Lightroom Slideshows and iTunes Music on Mac?

How do I use an iTunes Playlist on my Mac as audio for a Lightroom Slideshow? I have the latest Lightroom and iTunes versions.
Kevin

http://discussions.apple.com/thread.jspa?messageID=5350300&#5350300
See the above discussion. I believe (but to be honest, I am no expert. I am trying to figure out a different, but related question) that you can reformat your iPod to the FAT32 system on your PC, then go back to your Mac, use it as a hard drive, and transfer your songs to your PC that way. Once in the FAT32 format both PCs and Macs will read the iPod disk.

IPhoto slideshow to quicktime and audio tracks fadeout, undesirable.

I made a quicktime movie out of an iPhoto slideshow and the audio tracks fade out. Can this be prevented?

You probably will need a 3rd party application to convert the . mov QT file that iPhoto creates into a format for the iPod. Some are VisualHub, ViddyUp, and iSquint. You can find them at VersionTracker.com.
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Adding slideshow to audio track downloaded from Itunes

I can get to the part alright about adding the slidshow to the audio track but then I can't do anything. I can't save export nada. It is really fustrating as I got it to a point where I like the slideshow but then it just won't save the file. Not at all. I check the info and see the audio and video are there but I can't go any further.

The music downloaded from iTunes is protected and thus you can't export it to another form. You may be able to make a CD from a playlist that includes the tune and then re-inport it that way in unprotected form.

Replacing audio track - slideshow

I have managed to create an imovie project with a slideshow of still images, and an audio track.
I now want to re-use the same slideshow, but with different audio track.
I spent a lot of time setting up the slideshow, and would prefer not to have to repeat the whole process.
Is there any way I can re-use the existing slideshow, but replace the audio track?
Thanks.

If you still have the project in the Project Library and wish to preserve it, right-click (or Control-click) on it and select Duplicate Project from the pop-up menu, or select File > Duplicate Project from the main menu. A copy will be placed in the Library. It will have the same name as the original but with a number appended. The name can be changed - just click on it and it will be contained within a light blue background. Overtype the name to your preferred name.
In the duplicate project, you can now delete the original audio track (assuming it's a separate track below the video thumbnails in the timeline). Click on the audio track to highlight it, then press the Delete key on the keyboard.
John

Slideshows with Audio tracks

I am trying to add audio with my slide-show by adding a track from a cd.
Unfortunately however, I get the message:
"There is currently not enough audio in slide-show to fit the slides.
A minimum of 39 seconds is required."
The piece of music selected is 2.27MB.
I am successful however when using music from the My Music samples
file provided with my computer - 747KB.
I am run Windows XP
Your help will be appreciated.
Ron Knuckey

Slideshows with Audio tracks
Good evening Barb and thank you for your quick response.
I am delighted to tell you that I followed your advice and instructions and am now able to add Audio to my slide-shows.
It had become a frustrating problem until I received your help this a.m.
I am ever so grateful to you and next time I have a similar problem I shall call you first!
You have saved me a lot of wasted time and for that I thank you.
I have marked you in my Help folder as A1 and it is good to know that you are there if I need you!
Many thanks again.
Ron Knuckey

Adding multiple audio tracks to slideshow

Just wondering if it's possible to add more than 1 audio track to a single slide show.
If not, is there a way in which I can combine different audio tracks and make one file out of multiple songs?
That way I could at one track to my slide show, containing a couple of songs I would like to be heard along with the photos.
Thanks

First off, I am still using iMovie and iDVD version 4, so Apple may have changed stuff around from version 4 to version 6. But in general, I have the customize "drawer" open on the left of the screen. I then pick Media on the top and the pull down under that should be "Audio" (the other two choices being Photos and Movies).
I then have two windows below for iTunes. The top window shows all the playlists and the selection for "Library" which is for all songs. The bottom window shows the songs in the selection you picked above (everything if you selected Library or just the songs in a particular playlist).
The middle bar between the two windows has a little DOT you can grab and drag up or down see make either window larger, so if you don't see much of the top screen, grab it and make the top screen larger.
So first question is, do you see what I described above? And shown below?
Patrick

One song in audio track breaking up

I have an entire video complete. One song in particular that I have imported keeps giving me problems. It's breaking up (almost sounds like a cell phone). It's downloaded from iTunes. I put it in as an audio clip and shortened it. When I play the video, the first time, it does okay. After that, the first time the song starts, but then starts cutting out and eventually you hear nothing, then it will come back in. If you try it again, you may not hear anything, then it the audio will come back at a different point than last time. I've tried deleting the song from the audio track and bringing it back. Same problem. No other song has this problem. When I share the movie to iDVD, it does the same thing.
Any ideas?

Only one audio file can be used in a Lightroom slideshow.
You'll have to combine multiple songs into a single audio file (e.g. using Audition) then use the single audio file in the Lightroom slideshow.
For more flexibility, you can use commercial software such as ProShow Web, Gold or Producer which comes with a free Lightroom plugin
ProShow Gold - Create Fast and Fun Photo Slideshows
ProShow Web - Instant Photo and Video Slideshows from your Mac or PC
Plug-ins for ProShow

I have no sound on a Lightroom slideshow.

I have no sound on a Lightroom slideshow. Sometimes it works then the next time it doesn't. Even using the same track. I am using MP3 files. whats going on?

I'm having a similar issue. Using Lightroom ver. 5.7 In the slideshow module with the audio option checked, it allows me to select a mp3 file for background music - then says the file is an unsupported format. Result: no sound in preview or playback.
So is there a fix or what?

How can I export an audio track

I have made an audio track with three songs in GB and now I want to export it and use it as a track for a Keynote slideshow.
How can I export it as AAC or similar?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

Mute Audio Track of Embedded .avi File

Using iDVD, I created a slideshow with many pictures and .avi files. Because I'm using a background soundtrack, I would like to mute/delete the audio tracks of the .avi files embedded in the slideshow. Is this possible? If so, how?

hey there Mark,
you'd need to use iMovie. i prefer to build slide shows in iMovie6 as it's easier to use use for "more advanced editing". if you have iLife 08 you can dl iMovie 6 here: http://www.apple.com/support/downloads/imovieHD6.html.
good luck.

Can't trim beginning off audio track???

I am new to Aperture (3.0.2), so this is probably a simple question, but the problem is driving me crazy. Thanks in advance for any help!
I have a slideshow, and want to add audio. I can drag in a song (into the secondary audio track) from the audio browser, and it works fine. However, I want to trim off the first part ("boring intro") of the song. When I drag the slider at the start, it appears to work normally (like iMovie, for example), and I see the length of the song decreasing. However, when checking it is really trimming off the end of the song -- not the beginning! Is it possible to trim the beginning of the song off?

@Jeff: I have not tried this on the latest update to Aperture, but I had the exact same problems when trying out the Aperture 3 slideshows in an earlier version. It seems like a huge oversight to not include the ability to trim the beginning of a song but to include the ability to trim the end. Many songs start slowly and would often need to be trimmed.
I suggest that you submit feedback to Apple (select the "Aperture" menu item and then "Send Aperture Feedback...") on this issue, and I'll check my system tonight and submit feedback as well if I find that the issue hasn't been fixed in 3.0.2.

Why won't all my audio tracks export from iphoto to idvd

I've created a slide show in iphoto 5.0.4-- it has 144 pix and 3 audio tracks. works fine in iphoto. I've exported it as a QT file AND using send to idvd. Once i play it in idvd, only the first audio track plays, the rest of the slide show is silent. I have completley re done the entire show, re importing all the photos and audio, and still the same exact problem. HELP, I need this for a presentation this weekend!!!
Power mac G4 Mac OS X (10.4.3)

Hi Cyndi,
See this thread in iPhoto Forum: Topic: Slideshow to iDVD, photos ok but import only 1 song.
Power Mac G4 (QuickSilver) Mac OS X (10.4.3)

Audio tracks to Lightroom slideshows?

Similar Messages

Maybe you are looking for