Audio transitions adjust on both sides of cut

I am new to cloud. In my previous versions of Premiere Pro, CS5 and beyond, when I would adjust how far the audio transition (e.g. constant power) goes into a clip it would simply only apply to the side I clicked on. On the CC version it adjusts both sides of the transition. Is there a way to disable that/turn it off permanently (just for audio and/or video too), or a keyboard shortcut to use when I click and drag the transition?

Shift did it, I think I tried everything but that one before I inquired, lol, thanks!

Similar Messages

Audio Transitions not working properly in Final Cut Pro 5.1.4

I am noticing that I can't change the audio transitions on the timeline as I used to be able to do. Now I get a prompt to go to the Browser and select the audio transitions there which is not how I've done it previously. Before, I just clicked on the timeline audio clip, made a transition and then typed the duration of the transition in the Viewer. So, I'm wondering if I should trash the plist for FCP or do something else? The video transitions seem to work fine as they always have.
Thanks for any help!

Let me explain this better. When I click on an audio clip in the timeline I get this prompt:
No default transition to add. Please set a default transition in the Effects Tab in the Browser before performing this command.
I've never had to do this before, so I wonder if anyone knows why this suddenly is happening?
L.

Broke 1 clip into 3 continuous clips; add dissolves to both sides of cuts?

Hi there,
I've broken one clip into three continuous sections. I have to fade out at the end of each little section, and then fade up right away... I can easily add a dissolve at the end of each section (this dissolve ends at the clip end), but I can't then seem to add a dissolve back in, a frame later...
What am I doing wrong?
thanks, Malcolm

think I just figured it out. I simply moved the clip whose beginning and end I couldn't access (for the sake of adding a dissolve), up to a track above. That freed up both ends of the clip for dissolves.
cheers, malcolm

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Direct connections are always best, but if you insist:
Get a Griffin iTrip or replace your radio with one that has AUX inputs and/or Bluetooth.

Once iMovie project is burned with iDVD, picture on TV is cut off on both sides.

I made a movie slideshow using iMovie and used iDVD to burn it to disc. The movie plays fine, but when played on a TV, both sides of the picture are cut off. I inerted the disc into a computer and it plays fine there... I guess the problem is just TV format?

The following is just to illustrate Bengt's comment regarding TV-overscan:
Click to view full size
Click to view full size
OT

Audio transitions in Final Cut Express--Not Allowing

I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

Audio Transitions.. I'm experiencing "jump cuts" in audio

I am new to FCP.
How come my audio is not transitioning along with my video. I have no prob in iMovie and other consumer apps.
The video transitions smoothly but my audio JUMPS abruptly.
Thanks for your time. It's appreciated!

Well, did you apply a transition to the audio? This has to be done separately...transitions don't happen to audio AND video at the same time. Unlike iMovie, you need to add an AUDIO transition separate from video. Unless you see that transistion icon on your audio cut, it ain't there.
Shane

HT1040 I ordered prints.. received them with the people on both sides cut off.. how do I correct the problem?

I ordered prints from Apple. They came back with the people on both sides cut off. How do I correct the problem?

crop to the print size before ordering - for example you can not fit a 8x12 iomage onto a 8 x10 sheet of paper
LN

How do I split the audio to both sides?

I was given a video to edit and the audio is all on one side. Is there a way to duplicate the track and make the new track audible on the other side?

I had tried that once before on a similar issue knowing it should be a simple fix, and for some unknown reason at that time it wasn't working so I thought there was more to it. But it did work this time. Thanks.

How to create an audio transition

It may be my ears to blame, but I cannot hear any difference whatever, with any of the audio transitions. Further, I don't see any way to make adjustments in the adjustment panel either... or don't understand how to use it possibly.
To get serious fading I have to resort to the rubberband technique and end up setting 4 keyframs.
Am I just not understanding how to use the supplied audio transitions... should I hear some really noticable change if I use one, or not.
Maybe I need to make my own, but I could use a little help on that. I'd like to end up with a serious dip in volume as the cursor crosses from one clip to another.
Its a real time sync if you have a lot of clips, to have to set and adjust 4 keyframes at each junction.

Harry,
It sounds like you want the equivalent of an audio "dip to black"; in other words, you want the outgoing audio to ride from 100% volume down to 0% volume, and then the incoming audio to ride from 0% back to 100% volume. Unfortunately, there is no built-in audio transition that does this--they all function as crossfades with the volume from both audio clips being mixed during the entire duration of the transition.
Thankfully, there's a pretty easy and versatile solution, though it does involve a little setup legwork on your part. When in doubt, roll yer own
Drop an audio clip or a video clip with audio into a sequence, and go to the beginning of the clip.
With the clip selected, create a fade in using two volume keyframes, to the duration you desire. You already mentioned that you know how to rubberband the volume, and that's all you're doing here. You can either set this up in your sequence, or the effects control panel, whichever is easier for you. You can also Control+click the keyframes to turn them into Bezier keyframes, so that you can ease in and out of the keyframes, if you like.
In the effects control panel, under Audio Effects, right-click on the word "Volume", and select "Save Preset". In the dialog that appears, name your preset (i.e. Volume Fade In 1 second), select Anchor to In Point, and add a description if you like. When you hit OK, the preset will be saved in your effects bin under Presets, where you can categorize them later.
With this done, select the keyframes you created and delete them, or toggle the stop watch on and off to remove the keyframes. If you do the latter, you'll need to hit the keyframe button to remove the keyframe that is automatically keyframed.
Repeat steps 2 and 3 above but instead of creating a fade in, create a fade out using the same techniques. Save the preset again using the same procedure, but selected Anchor to Out Point, and change the name to reflect that it's a fade out.
You'll now have two custom fades in your Presets bin. You can select all of your clips that you want to apply the fades to and drag first one preset and then the other onto all of the selected clips. The reason you need to create two presets instead of one is because you probably want to maintain the duration of your fades, and the only way you can do this is to select the "Anchor to" options. If you created a fade in and fade out on one clip and selected Scale, the duration of the fades would be based on the duration of the clip; not likely what you want.
Hope that helps a bit...

3rd party dip to silence for audio transition?

I'm using the dip to black between video segments. I would need an analog dip to silence for audio. I'm aware of the workarounds like using the keyframes or shorten the track for one frame, apply constant power on both sides, and then lengthen the track again. The workarounds take too much time and on 150 segments they are both incredible big pain.
I need to be able to accomplish the needed result in less time and with less frustration and stress. I don't understand why Premiere CS6 still doesn't have a dip to silence for audio. I tried to find a 3rd party transtion, but haven't been successful, yet. Does anybody know something? Is it possible to program an own transition?
Thanks for any help.
Marcus

In line with Jim Curtis' suggestion, there is even an SDK Forum: http://forums.adobe.com/community/premiere/premierepro_current/sdk?view=overview
Good luck,
Hunt

[iPad Mini no Retina, iOS 7.0.4] Sound in only one side of earphone (no mic), but sound come from both sides when using FaceTime

Recently, I found with iPad Mini w/o Retina, iOS 7.0.4, the sound comes only from left side of my earphone when listening music, watching YouTube videos, even playing system sound. But the sound come from both sides when using FaceTime.
Earphone is not broken. Plug completely into the audio jack. This problem only shows up recently, worked fine weeks ago.
Anyone has the same problem? Or has some solution on this issue?

Settings>General>Accessibility>HEARING>Adjust the Left and Right Speaker with slider

Audio transitions on soundtrack

I am trying to apply a transition between 2 clips on the soundtrack. I can adjust duration without any problem, but I see no distinction between the alignment options of 'left clip, between clip, or right clip'. I am not certain this function is working as regardless of which one I choose, the little arrow that appears on the soundtrack to indicatie the presence of a transition is always in the 'center', without any distinction of 'left, between, or right'. Plus, when I finish adjusting duration and move to alignment, none of the 32 choices become highlighted, but remain shaded or grey.I thought if I chose 'between clips' that the fade of sound would occur at end of one clip and beginning of adjacent clip, but I onl.y notice fade on either the end, or the beginning, not both. Should transition alignment work with all sound clips? Any suggestions?.
Thanks...

There is essentially only one audio transition (although there are two versions of it) and that is the audio dissolve.
It is not a fade out from one clip and a fade into another. It is a transition in which one clip essentially blends into the other.
In order to adjust where this transition takes place between the two audio clips, you will likely need to trim about a second off the end of one clip and the beginning of another so that the transition will have "head" and "tail" material to create the transitional segment.

How can i add an audio transition?

Adding an audio transition, basic for an editor, is impossible with fcpx??
Or video, or video and audio or nothing???
I've an interview and i need a 2 frames audio transition to eliminate the distorsion on the cut, the famous "click"...the only way is to do a split cut and to move the audio handles?...i think it's crazy, when on FCP7 was only a right click!!!!
thanks to all!!!

Giuzilla wrote:
"Shift-F" i dont know i'll try to use it! But if work i think Apple have to put a interface command, not all can be only keyboard usable!
We wont to talk about the trim? The famous beautifull New trim interface??
No play around the cut to review the trim, and no possibility to trim going in play!
Match Frame (if it is what you think it is -- try it and let me know) is now called "Reveal in Event Browser" and is available in the "Clip Menu."
I think the shortcut for play-around the edit point is now shift-? (question mark). There are preferences to control the length but they are broken -- it's a known bug.
yeah, the precision editor while pretty seems a bit lacking in practical usage at this point.

Both side chatting with simple GUI ,,helps pls?

guys I'm Java application programmer i don't have well knowledge in network programing ,,my question ,,,from where should i start to design a simple GUI client*s* server chat program ,i mean some thing like simple yahoo messenger the program should include also adding contact and make that contact appears ON if he login or OFF if he sign out like red color for ON-line contact and and white color for off-line contact ...........
another thing that chat system should include shared folder all the contact can enter it and upload file or download file ...
please guys i run to you to help me i have 2 weeks only to do that thing please don't let me down i need your help ....TIPS,code,any thing full code :) ,,any thing will be really appreciated .
guys for more information the program includes only the chat of course its both sides chat between the clients and these is no conference room
or audio or video nothing ,,just text only nothing else except the folder shearing service and the colors of the contacts for login or not .
guys once more help me give me codes or any thing useful i count on you guys.
thx a lot in advance
RSPCPro
Edited by: RSPCPRO on Oct 3, 2008 6:25 PM

RSPCPRO wrote:
Dude , u r right ,,,but still its simple GUI issueI'm not sure why you are getting this impression. It's not a simple "GUI issue." Yes, you can simply create the GUI for this, but will it be functional? No. Furthermore, if it was so simple, why are you posting asking for help?
For an instant message chat program, in addition to GUI programming, you need to know how client / server systems work and you need to implement one. A server should be running on one system and the client(s) will connect to it. The server usually maintains the buddy list and passes the messages to/from different clients. This presents several problems that you will need to solve:
1. How will you develop a protocol between the client / server for communication?
2. How will you authenticate users?
3. How will you maintain the buddy list on the server (data structure, database, file)?
4. How will you pass messages from one client to another (simple string message, serialized data object, etc.)?
5. etc.
Now, I'm not saying this is "impossible" so please don't take it that way. I'm simply trying to help you realize that there are a lot of factors to consider when developing this type of application.
RSPCPRO wrote:
and for the "FTP?" ,,,its folder shearing as i said earlier every one of your friends can access it not FTP .....Talking about "folder sharing" is a whole other issue. What I meant by saying "FTP?" is, how do you plan on implementing "folder sharing" remotely? One option is FTP. How would you do it?
RSPCPRO wrote:
and one thing please don't assume any thing u don't knowIf you ask a very broad question and ask for code, I can only assume one thing.
RSPCPRO wrote:
be cooler with others and u will get what u want.I agree. You should take your own advice. I'm not the one looking for help, you are.
RSPCPRO wrote:
thx dude for ur advice and for the link have a good day.You're welcome, and good luck.

Audio transitions adjust on both sides of cut

Similar Messages

Maybe you are looking for