Audio transitions in Final Cut Express--Not Allowing

I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

Similar Messages

How to add audio track to Final Cut Express

Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

How do I export my video in 500x500 resolution? I know there's a feature in Final Cut Express that allows me to make custom dimensions when I export but I can't find the same in FCPX

How do I export my video in 500x500 resolution? I know there's a feature in Final Cut Express that allows me to make custom dimensions when I export but I can't find the same in FCPX.

Tom is right, BUT! ...the newest version of Compressor (41.) allows you to do just THAT! ...to export custom sizes.
It's easy. And... once you set it up, you can export DIRECTLY from FCPX, provided you've saved / added this scheme as a "destination" in the FCPX app.

Final Cut Express not able to run on new MBP

I purchased my 2.4 GHZ 2GB RAM MBP in late March. Today I installed my previously purchased Final Cut Express 2. When I launched the application, the following error message came up and did not allow me to run the program:
Configuration error
The software requires certain hardware or software which is missing.
- AGP graphics card
All of the MBPs in the Apple store had FCE loaded on them and I was pretty clear to the salesman that I would be using this software (FCE) on the MBP. Any help would be greatly appreciated. Thank you in advance.

How old is the FCE? FCE had to be rewritten to work on the Intel Macs. I had to update versions that ran on G4 macs because they would not run on G5 versions. If this is a newer version of FCE that runs on Intel Macs, then I do not have a suggestion for you.

Audio problems in Final Cut Express

I have edited 4 sequences successfully within a project. Everything was working fine audio and video. All material is saved to my external scratch disk. I left the project to take a break (saving it first of course). When I came back the audio is not working. I have not changed any settings and have tried to obvious like checking the volume on the computer. I know the audio is still there because the levels are moving and correct. I just can't hear it. This is the second or third time this is happened?
At one point I needed to capture some material and following capture it seemed to work again. Then I lost it again. I thought I would try capturing more material to see if I would have the same luck but not this time.
I am fairly new to editing and to Final Cut Express. Any help would be greatly appreciated.
Thanks

http://www.fcpbook.com/Audio2.html

Final Cut Express not opening, error says final FCE disks are missing.

Hi there,
Recently I got a WD Fire Wire 800 Hard drive for christmas so I could move all of my final cut projects over to the HD.
When I moved my final cut express documents including all of the folders it now says this error.
To preserve the integrity of the data used by final cut express, it is necessary to ensure the existence of the following paths;
- My HDD Chris is missing
Then it gives me the option to reset scratch disks, check again or quit.
So I'm not sure what I do.
Should I simply move back all the folders and documents that I moved to my hard drive (btw I tried this but it still gave the same error message). I have deleted final cut express 4.1 and re installed 4.0 to see if it works but it didn't and has the same error message.
Any tips would be helpful.
Chees, Chris.

Tom Wolsky wrote:
I can't even open FCE any more because I have moved everything onto the external hard drive including software 'everything'.
You moved the software? You can't do that. That's fatal. The software must be on the system drive as it requires system resources. Move the application called Final Cut Express back into the top level of the Applications folder. Do it move it, rename it, or put it inside a folder.
Do not assign the scratch disk to a folder anywhere. If you want the scratch disk to be on your external drive select the top level of the external drive. FCE will create the folders it needs in that location.
Hi,
When you say move the application final cut express into the application folder.
Do you mean move my folder of final cut express that I moved onto my HDD?
If so it's copying the 20GB folder as I speak. Hopefully fixes this frustrating problem..
Cheers, Chris.

Final cut express not opening

everytime i try to open final cut express, i get a message saying that the graphics card is missing. i thought all makes came with graphic cards. could my program be to out of date to use?

Deleting the preferences should not require you to re-register. Did you delete them correctly?
http://www.fcpbook.com/Misc1.html
After you trash the preferences launch the application not a project. Where exactly in the launch sequence does it fail?

Final Cut Express not recognizing P2

Running FCE on on my iMac, camera gets to desktop no problem. When I open log and transfer, FCE does not read the files. I am shooting on HPX370P, and installed the drivers from the disc but they are not staying in my applications folder. Help!!

Sorry, Final Cut Express does not support P2. Not DVCPRO HD nor AVCintra. Log and Transfer is for AVCHD formats only.
Shane

Final Cut Express not recognizing firewire

I recently deleted my hardrive on my '04 iBook, and reinstalled all my software. I have Final Cut Express version 2.0.2, and upon reinstalling it, and firing it up for the first time, with my XL2 on and attached via firewire, the "External A/V" window pops up, and says "Unable to locate the following devices..." referring to the firewire connection. Now that always pops up when nothing's plugged in that's turned on, but this is the first time it's ever done this when my camera is plugged in and on. I went through every NTSC firewire setting on the "Easy Setup" window, but nothing changed. iMovie reads my XL2 just fine with the same firewire cable. This problem did not occur before I clean out my hardrive, and reinstalled everything. But prior to reinstallation my "capture" function was freezing up after 5 minutes, and said my "startup disc" was full. Any ideas on what the current problems is?

I'm experiencing the same problem. I have a macbook pro 2.4 GHz, using a Canon HV20. When I enter FCE is prompts me saying "Unable to locate following device: Apple Firewire NTSC." However using imovie, everything works fine, I'm able to capture images simply by turning on my camera.
Not sure if its a problem with my FCE, because I've tried to edit in FCE using video from imovie and it gives me an error message constantly.
any ideas?

Final Cut Express Not Opening File

Hullo,
I bought Final Cut Express last weekend, and received it in the mail on Tuesday. I began using that night. When the night was through, I saved my project and shut my computer down. The next morning, I got up to go back to work on the project. When I opened the project file, Final Cut Express launched succesfully. However an error message popped up stating
"The project is unreadable or may be too new for this version of Final Cut."
I then closed out of that, and created another file with just one of the QuickTime sample files, I ran several edits on it, saved it, and quit. When I reopened it, it worked. So I restarted working on the first project. When I was done for the night, I saved it, and quit. I then just went to reopen it to make sure it worked, but it didn't. It brought up the same error message.
Any information or suggestions would be greatly appreciated.
Thanks,
Dmitry.

Thank you very much. I went in search of the Final Cut Express .PList, but it wasn't anywhere to be found on my computer. I had thought I had re updated everything recently, but apparently not. Final Cut Express 4.0.1 was one of the options. So I installed it and restarted my computer and launched my project file. It opened up the way it was supposed to, but it came up with a message that said that the project was from an older version and needed to be and could be updated to the new version. I did just that and now it works like a charm.
Thanks again for all of your help.
Dmitry

Final Cut Express - Not asking to auto-conform?

Here's the story -
I make videos for YouTube all the time, I currently film with a Canon Rebel T2i at 1920x1080 at 30fps. When I import my footage, I use MPEG Streamclip to convert it to Apple Intermediate Codec at 100% quality, and "1920x1080 (unscaled)". I never specify a framerate, it usually does it on its own. Whenever I put that footage into Final Cut Express (4.0.1), I drag it into the timeline and it asks me if I want to change the sequence settings to match the settings of that clip, and I always click yes, and it always works fine. However, today I wanted to try out some new settings on my T2i, and the ONLY different thing I did was change from 1920x1080 30fps to 1920x1080 24fps (and also changed some color settings to make it easier to color correct, but that should have no effect). I put the SD card into my computer, as I always do, put the footage into MPEG Streamclip, as I always do, changed the settings to Apple Intermediate Codec, 1920x1080 (unscaled), 100% quality, and no specified framerate, as I always do. The clip imported fine, as it always does. I put it into Final Cut, made a new project, opened the new sequence in the timline, and dragged my clip in. But I got no message asking to change the sequence settings, and the clip was in a square canvas, instead of changing to the normal setting one, which is wide. The quality was also highly reduced. This was abnormal for me, so I tried making a new sequence and importing an old 1920x1080 30fps clip, and sure enough the message popped up asking me to change the sequence settings. It worked fine, but then I tried again in a new sequence to import the NEW clip, and the popup ceased to appear again. I tried restarting my computer, reimporting the clip, checking for Final Cut updates, everything, to no avail. I just can't seem to get the new settings' clip to work.
My question is - why isn't Final Cut working with this clip's minor framerate change, and how do I get it to work again?
Thanks.
P.S. - I've tried looking in the preferences (editing tab) and checking the box to "Always" or "Ask", neither have made anything different.

wrong forum - the Final Cut EXPRESS forum is here:
Final Cut Express

Audio playback in Final Cut Express 4

Captured some clips and started a sequence all was fine. rebooted the software to get around an issue where it wouldnt let me drop any transitions in which is now fine. Now however im not getting any audio playback even though i can see the audio on the VUs. Now in system setting i Audio capture in the scratch disc section is not highlighted.. This is doing my head in cant find away around it. Please help..

Ignore the greyed out "Audio Capture".
It has always been like that and you can't alter it from the scratch disk you have set for the video.

Final cut trial not allowing dvd burn, is that built in to trial?

It allowed me to save to desktop but quicktime file is huge, 53 minutes =47g and 33 min was 15 gig. I thought I may want to try other software but need to get this project out. Will I be forced to buy or is there work around?

climbermom wrote:
OK, I have gotten it to post a video to you tube. I don't see any kind of status indicator telling me that it is actually working, though. Am I missing something? I just get an email from you tube a couple hours later telling me I have a new video.
But I have been unable to export a disc image, do you do that in the share menu as well? I still can't share to a DVD either.
I really love the quality of the output of FCP, much better than anything else I have tried and am very interested in buying it, but if I can't get a video onto a DVD it's not going to be much use to me. All I want is to send high quality movies of my daughter to her grandparents. They are usually of dance or orchestra performances so if the quality is not good you can't tell who she is.
Thanks so much for all your help.
If "DVD..." does not appear as an option (see the first picture), you will have to use the "Add Destination..." (also in the picture) to add DVD as an option. Then you will get the window in the second picture (altenatively, you may also access the "destinations" window via the preferences). You can just drag any of the options in the right panel to the list on the right, and reorder by dragging. You customize you export options to yuor heart's content.

Audio Problems with Final Cut Express

I exported a video to wmv format and when I play it back I have a problem with the audio at the end. At the end the sound seems to go into a loop and the the last words are repeated 3 times with a static sound. It plays fine on my MAC the problem only happens on a PC. The audio file was imported as a wma.

FCE does not export WMV without third party support. You should contact whoever produced the WMV export module.

Can you pre key other colours in final cut express not just black?

hey there i make little movies with muzzle flashes and stuff.
i was wondering if you can pre key fpptage thats not just a black background?
so if you can take purple or green backgrounds out not just black!
if you dont understand what i mean reply saying so.
please reply ive wanted to know for a verry long time.

Yes, use Chroma Key:
http://www.youtube.com/watch?v=9FCOMgcPMMY
MtD

Audio transitions in Final Cut Express--Not Allowing

Similar Messages

Maybe you are looking for