Audio units scanner freezes LOGIC 7.2.3

I recentely installed a TC express board and in my mac g5 and everything was working fine.
all the plug ins and demo plug ins were great. I downloaded installed some sony oxford
plug ins and everything went according to directions. But now when I try to start logic pr 7.2.3
It trys to scan the plug ins (audio units) and the computer freezes and ask's to be restarted.
So I restart it, then it seems to scan a little further and freezes again asking for a restart.Ive tried re loading
the most current version of powercore software to no avail.
Any ideas, PLEASE
wats434
G5 QUAD   Mac OS X (10.4.8)  

djanebeing wrote:
oh, well that's simple enough thanks - I have a formac 250 gig external harddrive, which I have only been using to store stuff on. SO what you're saying is (forgive me for being a naive simpleton, we all start somewhere) I should create my music on my mac in Logic and all my saving should be on the external hardrive. Then once I've saved onto the external hardrive I can play back from there? Is that what you mean?
thanks
jane
Yes, absolutely.
And, remember to keep 20% of your system hard drive EMPTY. this will help the computer deal with it's own processing.
Cheers

Similar Messages

  • Audio Unit Bridge overlapping Logic.

    Hi all,
    Sylenth was previously working fine until I installed 9.1.8 update moments ago. My apology if my explaination is rather confusing but this is what I'm currently facing.
    I'm on 64bit logic and trying to load Sylenth, this window pops up.
    Sylenth eventually shows up after clicking it but logic is now being overlapped by the 32-bit Audio Unit Bridge application, restricting me to audition Sylenth with the Capslock keyboard. Notice that my top status bar (next to Apple Icon) has 32-bit Audio Unit Bridge as active window now? Disallowing me to play the Capslock keyboard.
    So, I cannot play Capslock keyboard when I have Sylenth as active window and vice versa. Is there a way I could go around it ?
    Thanks a bunch in advance.

    As far as I can tell, Sylenth is a 32-bit instrument, not a 64-bit instrument. If you're running Logic in 64-bit mode, the only way you can use Sylenth is via the 32-bit Audio Unit Bridge.
    When I run a 32-bit plugin in Logic Pro in 64-bit mode, I can preview instruments with my MIDI keyboard controller, or with the Capslock keyboard in Logic. I don't have Sylenth, or Logic 9.1.8, or Mountain Lion (on purpose!), so I can't duplicate the condition you're reporting (assuming I've understood your post correctly). But with any 32-bit plugin I own and use via the 32-Bit Audio Unit Bridge in Logic Pro running in 64-bit mode, I can use either the MIDI keyboard controller or Logic's Capslock keyboard. I am not restricted to using only the Capslock keyboard, nor does the 32-bit Audio Unit Bridge render the Capslock keyboard non-functional. It works exactly as it should.
    It might be that your problem is with Logic 9.1.8. It has known bugs with certain plugins. I was unable to get any of my EastWest Quantum Leap plugins to validate under Logic 9.1.8, and I had to revert to 9.1.7. (I'm running Snow Leopard v10.6.8. and 9.1.7 is extremely stable and reliable in that system.)
    If you need to revert to Logic 9.1.7, here's how to do it: https://discussions.apple.com/thread/4551179?tstart=0

  • TS4630 Hola tengo el sintetizador Korg X50 y no me aparece como VST o Audio Unit en el Logic X Pro, antes si me aparecia en Logic 9 pero ya no. Como puedo resolverlo?

    Hola tengo el sintetizador Korg X50 y no me aparece como VST o Audio Unit en el Logic X Pro, antes si me aparecia en Logic 9 pero ya no. Como puedo resolverlo?

    Hola joel_calderon que tal,
    En administrador de discos que es lo que te indica.
    Si has eliminado la partición de recuperación dudo que puedas regresar a las configuraciones de fabrica.
    Retira la batería y verifica si la pegatina del serial esta en el espacio que ocupa la batería, en el mi SL410 esta hay.
    1.-Tu Sl410 tiene lector de huella digital no recuerdo que este lo tenga por lo menos el mio no, la SL510 si lo tenia.
    2.-Con el system update se debió instalar thinkvantage technologies (engloba los programas que comentas), pero si no fue satisfactoria esta instalación.
    puedes instalarlo manualmente desde este enlace http://support.lenovo.com/es_PE/
    3.-No entiendo bien a que te refieres pero esto es configurable (cambiar color y actividades), la imagen fue echa para otra pregunta no le prestes atencion a las flechas, con el system update tambien debio habilitar el funcionanmiento de las Fn en pantalla, sumado a que debes tener instalado el power manager.
    4.-No me que da claro, pero puede deberse a un formateo y posible instalacion de cero, debes tener instalado el ThinkVantage Toolbox.
    La manera de tener todo de fabrica es validar tu serial luego de una instalacion limpia y utilzar el system update.
    Un saludo.
    @Antony_Vamu
    Comunidad en Español  English Community  Deutsche Community  РусскоязычноеСообщество
    Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

  • HELP Audio Unit scanner crashes on logic pro X when trying to load mpc studio

    Everything was running fine I could open my mpc studio up as an AU plugin and it would run smooth but as of recently I keep getting an error saying logic has to quit because it cant open my plugin .. this is the error message i receive when trying to validate my plugin
    validating Audio Unit MPC by Akai:
             AU Validation Tool
             Version: 1.6.1a1
              Copyright 2003-2011, Apple, Inc. All Rights Reserved.
             Specify -h (-help) for command options
    VALIDATING AUDIO UNIT: 'aumu' - 'MpcV' - 'AKai'
    Manufacturer String: Akai
    AudioUnit Name: MPC
    Component Version: 1.4.0 (0x10400)
    Component's Bundle Version: 0.0.0
    * * PASS
    TESTING OPEN TIMES:
    COLD:
    AudioUnitPluginInstance::getComponentDescFromFile() : /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst
    Attempting to load VST: /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst
    2013-08-10 17:22:28.915 auvaltool[256:f07] Error loading /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst/Contents/MacOS/MPC60Emulator:  dlopen(/Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst/Contents/MacOS/MPC60Emulator, 265): no suitable image found.  Did find:
              /Library/Application Support/Akai/MPC/Fx/MPC60Emulator.vst/Contents/MacOS/MPC60Emulator: mach-o, but wrong architecture
    FATAL ERROR: OpenAComponent: result: -1,0xFFFFFFFF
    validation result: couldn't be opened
    If anyone can make sense of this It would gladly appreciated

    nevermind I solved the issue. I guess I had to update my mpc studio twice in order for logic to see it

  • 32-Audio Unit Bridge freezes on first launch

    I am running Logic Pro 9.1.6 and MainStage 2.2 on 10.7.2 on a Mac mini server (with server functions off) with 8GB. Both Logic Pro and MainStage are running fine in 32-bit mode. In 64-bit mode, after the initial boot, whichever program I begin with fails to launch the first time. The freeze point is when 32-bit Audio Bridge attempts to launch. The system continues to run fine at this point, just Logic Pro or MainStage won't come up. If I force quit whichever program I initially started, either program will subsequently launch without issue. If I take them back to 32-bit mode, no problem. If I'm willing to do an initial aborted start at startup in 64-bit, no problem. Clearly the issue isn't life threatening! But it's not right. Any help is appreciated.
    Thanks,
    LC

    If you are running Logic in 64-bit mode with a variety of plugins, you're going to have to realise that things probably won't be stable until updates get released.
    The AU bridge is a workaround for the transition period, and one that many third-party developers haven't had much of an opportunity to test with their products, so you may well get funky behaviour in certain things.
    If you're really stuck, go back to 32-bit mode for your edits, and it's worth contacting the developer of your plugins to see what they say about AU Bridge and 64-bit compatibility.

  • Audio Unit Problem with Logic Pro and Mainstage

    When I go to launch my apps, both Logic Pro and Mainstage get stuck loading an AppleAUspeechsynthesis or something along those lines. It never makes it past there and I either have to force quit or it quits itself. I can press control while launching Logic Pro, but then I only get basic MIDI. I just tried an archive and install and I'm in the process of reinstalling Logic Pro right now. Does anyone know what might be causing this?

    I just tried pasting my crash report. It seems like it is too long to post?

  • Logic pro audio units manager

    I have Logic 9 . I have Waves native plug ins which I use in Logic. I updated waves and now when I load Logic the audio units examiner freezes up and all plugs ins are disabled. The window showing audio units being examined opens showing the number of audio units to be examined and then nothing happens at all. I spoke with folks at Waves and everything seems ok on their end. Please advise.
    Steve Staples
    1 504 442 0696
    [email protected]

    the prob is most likely a bad plug in. some of them don't pass validation, others crash the validation program itself. go to the websites of your plug ins and check you have versions that work with your system version and logic version. make sure you check that the fxpansion wrapper is also current. also, if you happen to have the old logic tuner AU plug in from logic 6, get rid of it. it doesn't validate and the tuner is a built in logic plug in now.

  • Logic Pro 7 (7.2.3) Audio Units Manager crashes

    Logic Pro 7 (7.2.3) "Audio Units Manager" causes Logic to crash whenever it is selected from the Preferences menu. Most plugins have been wrapped by
    FXpansion's VST-AU program successfully, Logic (after much work) finally goes through the validation process on start-up, but I'm unable to see what's happening in the AU Manager. Running Logic on a Mac G4 Dual 1 GHz machine with 1.5 GB of RAM. Any suggestions on what could be causing this problem?

    the prob is most likely a bad plug in. some of them don't pass validation, others crash the validation program itself. go to the websites of your plug ins and check you have versions that work with your system version and logic version. make sure you check that the fxpansion wrapper is also current. also, if you happen to have the old logic tuner AU plug in from logic 6, get rid of it. it doesn't validate and the tuner is a built in logic plug in now.

  • Converting vst to audio units

    does anyone know how to convert vst's into audio units so that logic pro 9 can recognize them?

    Never tried this one:
    http://www.kvraudio.com/product/vstau-manager-by-sethk
    There's also one by FXpansion that's a 'wrapper' for them, used to cost $99

  • Logic Pro and Basic Audio Units

    Is anyone else having an issue with Logic Pro 9.1.8 and using legacy/basic audio unit effects located in the Audio Units > Apple location?  It seems as though anytime I try to use an AU* type plugin with my project the EQ freezes like it did before the 9.1.8 update was applied.  I've noticed the issue occuring when I have 8+ tracks with midi, samples, and Apple Loops in the project.  The HD and CPU meters are very low (1-2 bars) and it just hangs.  I don't think track count or track type has anything to do with this issue as my last project had ~24 tracks and did fine up until I added in AULowpass and that is when I started having problems with the EQ.

    This is because you have Punch on the fly enabled under Options (top menu)>Audio>Punch on the Fly.... signified by the letter P instead of the letter R

  • Logic audio unit bridge unresponsive/gui doesn't show up properly

    Hi there, having a problem running some 32 bit plugins while running logic in 64 bit mode.
    For those who are familiar with the Audio Unit bridge, when clicking on a 32 bit plug-in it brings up this grey window which prompts another click to bring up the interface. When I click on here the GUI appears for a split second then disappears again or sometimes doesn't appear at all. Noteably, the plugins still allow audio through, it is just the interface won't appear.
    After a while of having a project open, I have also experienced Logic giving me this message presumably due to the same problem:
    It lists all the 32 bit plugins used within the project and says they are unavailable, crossing them out in the logic mixer and removing them from the audio unit manager.
    I have tried removing the logic .plist file which allows the loading of the plugins again but not does not solve the problem of the unresponsive GUI.
    Really lumbered by this one, any potential resolution much appreciated.
    Thanks
    A

    this might be a graphic issue with my 2013 macbook pro retina 2.8gig
    i went to preferences and changed the display type... the plugin then shows up. but left in any one of the modes, if i take out the plugin and recall it the same issues remain. Maybe my graphic card is failing

  • Is any Logic 8 (Studio) user able to open STP with audio units plug-ins?

    All of my 3rd party audio units plug-ins work with Logic 8: UAD, Powercore, PSP, NomadFactory, and RND.
    MainStage and WaveBurner open without any problems.
    Soundtrack Pro will only open if all of my AU plug-ins are removed to a "Components (Disabled)" folder.
    I tried adding a few AU back into the components folder. Some seem ok, but if STP crashes after more AU's are added, then those that previously passed inspection seem to then cause STP to crash on start up.
    I've tried trashing the com.apple.soundtrackpro.plist, EffectsCache.plist with temporary benefit.
    I would like to use STP for mastering Logic audio mixes before burning in WaveBurner. Isn't this one of the benefits of purchasing Logic Studio???
    What to do???

    A little patience pays off...
    The problem is...the +_*&^%$#@!!! TC PowerCore plugins!!!
    And I'm somebody who actually likes them.
    After receiving a suggestion that the TC Assimilator in particular might be problematic, I decided to gradually add everything but TC plugs. STP is now well behaved. I tested the waters by adding TC ClassicVerb and MegaVerb. So far...OK. The TC ClassicVerb is one of the best out there besides the $699 TC VSS3.
    I can live without the other TC stuff for right now.
    Again, I really appreciated the support.
    Best

  • Location of Logic's "In-Built" Audio Units? (Sculpture etc.)

    I'd like to be able to use plug-in instruments/fx like Sculpture, Space Designer etc. etc. in Nuendo, without having to resort to rewire.
    With the program Plogue Bidule I can insert Au into Vst and vice-versa...
    (and much more...super prog.)
    But...uh...where are these Logic "built-in" Audio Units?
    Needless to say I have full registered versions of all of these.
    They function as plug-ins so they must exist in some self contained format somewhere on the drive.
    Any Suggestions?
    Thanks
    Brutze

    This is what I found as well (in response to my post
    here), and it's a shame. I'd be happy to have to
    have my dongle plugged in if I could use Logic's
    effects and synths in external apps.
    And a lot of us would be happy if we could have an Mbox plugged in and use RTAS plugins within Logic. And maybe some VST's as well. But that's just not the way it is.
    Aside from the hypocracy on Apple's part (they say
    AU's are good enough for 3rd party developers)
    They are good enough for third party developers. I think you misunderstood what Apple was saying there. A third party developer is anyone willing to create a plugin in the AU format - a third party developer is NOT steinberg. . . and a third party product is NOT cubase/nuendo because it cannot be used in conjunction with Logic. If it can be used in conjuction with Logic (i.e. any plugin NOT made by Apple, but is still encoded using the AU format) but is not made by apple, it is third party.
    expected to be able to use these components outside
    of Logic, and was disappointed to find out this
    wasn't possible.
    Use a few other DAW systems, and you will find that any native plugins are not useable in other DAWs. . . such as Digidesign's Beat Detective - I'd love to use that in Logic - but I can't.
    Logic is not the only software that doesn't allow the use of its included plugins outside of the host software. It is EVERY DAW software.

  • Logic Audio Unit Validater

    I have loaded new waves audio unit plug-ins into Logic Pro 7.1, when they are authorized they have shown up doubled, the 5.2 versions. One group validates, the other crashed. Thus, every time Logic Pro 7.1 is loaded at start up it lists the bad plug-ins and you have to click ok to every unvalidated plug in before you can get Logic to full boot up. Is there a folder that you can delete from for the audio unit validater? Does any one have any ideas? Thanks

    Launch the AUManager and deselect the bad ones?

  • My audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic

    my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
    any help please im going out my mind
    regards james

    Thanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
    But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
    Again thanks for replying
    Regards James

Maybe you are looking for