Audio very low when i use blutooth Handset in my L...

Hi,
I have the Handset BH-106 which was working fine with my old Nokia Phones, after i got the Lumia 920 i Found that the Audio became very low after start the Call, it will start good but dropping down with the time, it was very old so i decided to buy i new one and i have selected the BH-217.
i have tested it in the store the Audio was perfect, after few days the same issue accure and now im sure its the Phone issue not the Handset.
i did soo many soft/Hard Resets, i also got the Portico update, and i got other nokia Update (like Audio and others) but nothing worked.
is it really the Phone Issue because i dont want to buy newer handset like BH-220 with no benifits !
what is the soulution and what is the best Audio Hanset (for phone calls only i dont listen to music), which is have a car base like the BH-217 and can go to stand-by Mode.
Regards,

It seems like this is a common problem with the BH-217 and it's auto adjust volume. You should be able to adjust volume on the phone.
Others have the same problem.
http://discussions.nokia.com/t5/Accessories-Car-Phones-and-Other/Bluetooth-BH-217-volume-problem/m-p...
Any bluetooth headset should work for you.

Similar Messages

HT201343 My macbook pro becomes very hot when i use airplay ?!

my macbook pro gets really hot when i turn on airplay (watching movies) ?!
macbook 2014 - 17

Dear mr Mario,
those suggestions not working with my notebook computer ?! ..
because its becomes very hot when i use airplay only ? (with apple TV)

My iPad getting very warm when i use it for bit in longer time

Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?, Why my ipad is getting very warm when i use it for bit in longer time, any body has same experience?

The Temperature warning usually appears when the iPad has been set in a place where it gets so hot to the touch that you'd almost burn your hands if you picked it up. The temperature caused by the processor or charging the battery should never reach that level. If you feel your pad is too warm when you are using it Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

My iphone4 reacts very slowly when I use the button.Problem after updating to newest IOS

My Iphone 4 respond very slow when I use the button. The problem started when i updated to new IOS 6.0.1

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

QT 7 Pro - Volume of audio is very low when I record from a microphone.

Possibly someone can help me here, I am trying to record audio using a microphone and QuickTime Pro. I want to put this audio on my Nano.
I cannot get the audio volume up to the level of existing imported audio programs when I record a audio program using QTP and a mic.
I have already tried to set the microphone volume to a higher level. In the Quicktime Program I set the Menu/Edit/Preferences/Quicktime Preferences
I then go to the Audio tab, select audio recording and playback devices, select "audio playback and recording devices" and set the volume slider on the microphone to high, go to the advanced tab, set the microphone to boost, still I get a very low volume.
When I record using the Windows Sound Recorder I get a high volume, but the output is a wave file and the quality is not as good as I really want. But clearly the microphone and driver work. I have tried updating the driver, still get low volume for my recorded audio.
HP DV1000 Pavilion Laptop Windows XP Conexant AMC Audio Driver

So you use an RCA cable going into what before it hits the MBP?
EDIT: Also in System Preferences > Sound > Input > you can select the input & adjust the volume accordingly as long as it's plugged in.

IPhone 4 soundis very low when headphones are used

my iPhone volume is extremely low when i plug headphones in when listening to Netflix, Pandora, etc. When i unplug the headphones, the volume is normal when coming from the speakers in the phone- this only happens when we use headphones. We took the phone to the Apple store yesterday and they completely replaced the phone with a new one- and the new one is doing the same thing- you can barely hear anything when headphones are used.. all our sounds are turned all the way up- if there a way to configure the sound settings in iTunes for your iPhone???

This sounds silly but did you remove the plastic tabs covering each ear plug?
If so then read here : http://support.apple.com/kb/TS2802
Good Luck

Very low resolution previews using loupe in import dialog

Hi,
I had connected Canon 6D via usb to import photos to Lr. However in import dialog using loupe view I get very low resolution previews even if I zoom all way up. It doesn't make any changes in preview resolution, it's like 200x300 pixels at most. I shoot both raw and jpeg and it is the same. Tried full card format. Doesn't help. I can zoom normaly in camera screen. Is it related to the fact that I connected camera directly via usb instead of using card reader? I use latest Lr (5.6) and latest camera firmware (1.1.4).

A raw file usually has two previews embedded in it, a tiny thumbnail preview and a larger zoomable preview. It sounds like LR is only able to retrieve the tiny thumbnail preview even though you are able to zoom in on previews in the camera. Unless the camera, itself, is actually decoding the raw file to produce the zoomable preview and none is in the raw file for LR to see.
You can use the following website to investigate what previews are available in a raw file: http://regex.info/exif.cgi You want to click the Browse button next to Local Image File and navigate to a raw file and click Ok, then click the View Image From File button, then wait for the raw file to be uploaded, after which information about the raw file will be shown including the sizes of the previews and raw image.
As to your question about whether using a card reader might help, try it and see. There could be a system driver getting in the way when the camera, itself, is plugged in.

Final Cut Pro Audio Levels Low when exporting to mp3 and mp4

Hi everyone! When I export audio from Final Cut as an mp3, my levels are very low. When I export footage as an mp4, the audio is low as well. But before exporting, my levels are right at or below 0. So they are where they should be. So for example, when I open the audio in Adobe Audion or Logic, they could almost be doubled before peaking within those programs. Could this be a compression issue? And input would be helpful. Thanks!

Are you working 0n 10.0.9? If not, update FCPX and see whether that solves the problem.
Russ

Phone volume very low when recieving/making calls

I have the volume up all the way but can barely hear the person on the other end of a call. When I use the headset the volume is just fine and when I put it on speaker it seems to be OK as well. It is just when I have the phone up to my ear that I have problems hearing. Is there anything I can do to increase the ear speaker volume?

I'm suddenly having the exact, same problem with my iPhone 3G. I'm a Mac and iPhone "power user," and I know the device very, very well. (I also had an original iPhone for a year.)
Suddenly, the volume of calls on my iPhone 3G is extremely low. My Apple bluetooth headset and the speakerphone both work fine. But when I put the phone to my ear -- I can barely hear the caller.
I don't use a screen protector, my phone's never been dropped, and the volume's turned all the way up. (Yes, I've done so while a call is in progress.)
I was hoping to find a solution, here in the discussions. I'm completely stumped....

Audio very low

I have issued with audio
the audio in my notebook is very low

Hello zain_9274,
Welcome to the HP Forums!
I understand the audio is low on your notebook. Have you tried turning it up?
Seriously, you can turn up the volume on the bottom right-hand corner of the screen where the speaker is. Each program can also increase its own volume.
If you still require assistance, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Thanks
Mario
I worked on behalf of HP.

Why is the audio of MSNBC, YouTube and other site videos very low when using Firefox?

For several weeks now, when I view videos from msnbc.msn.com, youtube.com and other videos from other sites, the audio is so low....I can hardly hear it. But when I view the same videos using Google Chrome, the audio is very good.
== URL of affected sites ==
http://www.youtube.com

Did you check the volume setting in the Flash player?
Do those Flash players have a volume button that opens a slider?
Clear the Flash cookies and settings.
Flash Local Storage - http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
The Flash object on that page shows the local storage on your computer.
You can also delete the macromedia.com and #SharedObjects folders to reset all Flash cookies and settings.
XP: C:\Documents and Settings\<user>\Application Data\Macromedia\Flash Player\
Vista: C:\Users\<user>\AppData\Roaming\Macromedia\Flash Player\
(AppData is a hidden folder: http://kb.mozillazine.org/Show_hidden_files_and_folders )

HT200131 When I connect my MacBook Air to my TV using Apple TV, the audio stays on my MacBook and does not transfer to my TV. Thus the volume is very low when I am watching a Movie on my TV and I have to listen to the volume from my laptop. How can I fix

When I connect my MacBook to my television using Apple TV the audio stays on the MacBook and doesn't transfer to the TV. How can I make it so I can hear the Movie or Video through my TV's speakers and not my MacBook's?

This is called "extended desktop mode". It's an extension of the desktop off to the right (by default) of your MBair screen. Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
To mirror your MBair screen on the TV you can press Command F1. This will toogle between mirror and extended desktop.
You can find all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred

Video audio output very low on Skype using windows...

hi,
I have just bough a lenovo laptop with windows 8.1 and when I contact anybody on video they cannot hear me, it is really low. I can hear them perfectly. I have checked the settings as advised ib the skype faq and all seems to be okay.
Can anyone offer any possible solution as its driving me mad Music and youtube etc plays fine
Thanks
[Removed for privacy]

If you have Conexant sound card, then try to disable all enhancements. Open Windows Sound Control Panel -> Recording devices -> Properties -> Advanced.
http://community.skype.com/t5/Windows-archive/internal-mic-not-working/m-p/1106600#M83651

Macbook shutting down by itself, and very hot when being used

Hello!
My 2009 Macbook has me worried. When I put it in sleep mode and plug it in, it shuts down by itself at some point, so every time I go to use it again, I have to turn it on as though I had initially shut it down. Also, the bottom of my laptop is very hot.
Does anyone have any idea what might be going on? I am so grateful for your input!
I am just outside of my Apple Care warranty coverage, unfortunately.
Kavita

Answer to ur 1st question : it's just gonna be a standby mode ! once u want to turn it up , just swipe up from bottom to the top.
Answer to ur 2nd question : it's quite normal ! don't be nervous.
kind-hearted Pb specilist .
PLS give me a kudo if I help u with issue U r encoutering~!
Any questions, feel free to let me know.

Battery capacity very low, despite careful use and maintenence

Hello,
The current battery capacity of my MacBook Pro seems to be diminishing rather swiftly. I bought my Mac around 4 months ago, and have been using it for less than 3 months. I try to run Battery Calibration often (sometimes many times in a row, just because the situation allows for it), and I have never started charging it until it has went into standby due to low power. I tend to use it when running on battery, though I do occasionally keep the power-cord plugged in when fully charged.
The problem is, my overall battery life is down to 93% of the original, only with 63 loadcycles. That's not the worst part - it has recently been going down even quicker then before when 98% or so worried me.
I have kept a log of the life of my battery using CoconutBattery, it is as follows (in order from earliest to most recent):
98 % (5440 mAh) 2007-09-06
99 % (5464 mAh) 2007-09-09
98 % (5410 mAh) 2007-09-10
98 % (5440 mAh) 2007-09-12
98 % (5444 mAh) 2007-09-13
99 % (5450 mAh) 2007-09-13
99 % (5450 mAh) 2007-09-15
99 % (5463 mAh) 2007-09-15
98 % (5420 mAh) 2007-09-17
98 % (5429 mAh) 2007-09-19
98 % (5443 mAh) 2007-09-21
98 % (5392 mAh) 2007-09-21
97 % (5387 mAh) 2007-09-22
97 % (5360 mAh) 2007-09-26
97 % (5352 mAh) 2007-10-01
97 % (5387 mAh) 2007-10-04
100 % (5544 mAh) 2007-10-15
97 % (5339 mAh) 2007-10-16
96 % (5292 mAh) 2007-10-17
98 % (5437 mAh) 2007-10-19
95 % (5242 mAh) 2007-10-21
93 % (5143 mAh) 2007-10-23
Why are there so many jumps in percent, both up and down? How can I improve on my battery capacity? Can I anyhow make it increase back to the full 100%?
Is it better to keep it plugged-in or use the battery? Is the OK to charge it often?
Thank you for your time. I hope you can help!
Rudi

It doesn't say that on the apple site!
You're right, it doesn't. It in fact actually implies the opposite…
"Standard Maintenance
For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her MacBook Pro on the train, then plugs it in at the office to charge. This keeps the battery juices flowing. If on the other hand, you use a desktop computer at work, and save a notebook for infrequent travel, Apple recommends charging and discharging its battery at least once per month."
http://www.apple.com/batteries/notebooks.html
Thing is, this text is aimed at those that rarely use their batteries as opposed to that those that do given that with regular battery use you're already doing the right thing.
Additionally, by regularly using your battery the function a calibration is actually relegated to a way of accurate reporting. Over time the cells degrade and the battery's circuitry as well as your MBP's SMC gets out of sync with this which results in incorrect battery run time figures. In the worst case this irregularity can result in your MBP shutting off without warning as it thinks it has more power than it really does. Calibration just lines this all back up again.
This does not mean you shouldn't calibrate but to do it only every now and then. I have an iCal to-do item to do it after 6 weeks from the last one although it can actually mean I don't do it for 8-10 weeks.
maybe change the battery - if so, will I still be able to purchase a new battery for my current SR model? Or should I buy one and keep it in stock now?
Assuming Apple changes the MBP battery on it's next revision you'll still be able to purchase new batteries for your MBP. While they don't make then indefinitely they won't leave us high and dry without a source of new batteries even after a line is not longer current.
Buying new batery is not recommended until you actually need it as Li based batteries degrade from the time they're made so the newer the stock the better.

Audio very low when i use blutooth Handset in my L...

Similar Messages

Maybe you are looking for