Audio/Video (Adjustments Disabled)

I have a PHOTO that cannot be edited (in the Adjustments window it says Audio/Video (Adjustments Disabled)), everything in edit greyed out. Previews are enabled and all other photos are working fine.
If I duplicate this picture (remember it is not a video please) I get the same problem with the new file.
The image is a TIFF file created from a RAW master. This image is a vital aprt of my business collection but I cannot export the version in any format as the option to alter the export type is also locked and the file simply exports as the tiff file.
Any ideas? I am really stumped with this one and whilst I have seen it before, it was never this important.
Thanks
Iain

Hi léonie
All badge Icons are standard
The file type is blank, and interstingly the camera and lens info says unknown despite the file's master CR2 raw file showing it.
If I go to edit by photoshop for example, the photoshop option is mssing and Aperture just says edit via external editor whereas with normal working files the photoshop option is there.
The TIFF was generated by Colour efex pro 4. I use this consistently without drama. This is the only file with the issue.
No, the search for the file as audio or video does nto reveal the image in a smart album.
Scary stuff this.... if it happens more often I am in trouble!
Thanks
Iain

Similar Messages

My apperture come up with audio/video(adjustments disabled) when I try to edit any image with either photoshop or nik software, can anyone help.

Please can someone help me.
When i try to work on any file in either PS or nik software the following thing happen
1) I notive the image file comes up with the reprosses message
2) I reprocess and then then try to edit file in PS or NIK and get the following
or
I read a group discussion which suggested repairing the library (middle Button) and rebout but the results were the same. Can someone please help, I am not that techie (over 65) so could I ask that any suggestion are very clear and assume that I know very little. Regards Mark

I had my previous note all organised with screen grabs of the three messages I wwas talking about but the have not appeared in my post!
1) reprosses message asking to reprosses file
2)audio/video(adjustments disabled) this showed up in the adjustemnt window.
3editing error sayinh "this image cannot be rendered for editing because aperture does not support the image format"
Sorry that my screen grabs didnt work

How do I adjust video "Audio/Video (Adjustment Disabled)"?

When opening a video file, from my Canon Eos 7 d, the adjustment field is grey and it says: Audio/Video (Adjustment Disabled). And Im not in Quick Preview mode.

The only thing I don't like about sending it to an external editor is that it creates another copy of an already large file - similar to what it did before when you'd roundtrip to photoshop. For more extensive editing of video, that's fine, but for simple things like rotating a video, it would be nice to not have to create a whole new copy.

Getting the following message on Final Cut Express "audio only capture selected video preview disabled" how can I get the video capture back?

I'm getting the following message on screen when attempting to capture video "audio only capture selected, video preview disabled." How can I get the view preview back?

FCE doesn't allow for audio only capture, it's in a twist somewhere.
Try trashing the FCE preferences.
Al

I am using ALSA and Icecat. When I play any html5 audio/video it works, but the next time i click on another audio/video link I lose sound.

I am using Parabola (a fork of archlinux), Icecat 31.4 and ALSA
Icecat and firefox seem to hold onto the soundcard when I click on a new html5 audio/video link in the same tab. The next video/audio element loses sound. If I wait 10 seconds and click back to the start of the audio/video, the audio returns. I often get cpu spikes for icecat when it happens.
I have tried this with both motherboard and usb sound and I get the same problem. I have disabled extensions (addons) in Icecat, deleted profiles, reinstalled the browser and even installed firefox from the AUR and it still occurs.
I have disable gstreamer in about:config and restarted and it still occurs.
My .asoundrc is this:
pcm.!default {
type plug
slave.pcm "hw:0,0"
All my other audio applications work. I have noticed that if I use pulseaudio it fixes it, but it should work without anyway, like it used to. I think something happened after an update, but I'm not sure.
Any help would be appreciated. I know it's not a big problem, but it's really frustrating and I've had it for ages. I even switched browsers to get away from it.

*nerding out*
I am not an expert in this and if we get stuck I have found a mailing list for the alsa project that can be contacted: http://www.alsa-project.org/main/index.php/Mailing-lists
Gstreamer is disabled in Firefox as well as the os?
Since you are seeing issues with ogg files and moving video/audio combination I started to dig into file formats {sox http://sox.sourceforge.net/soxformat.html}
For ogg would the file format affect the "raw"?
defaults.pcm.file_format "raw"
Updated libraries
alsa-lib-1.0.6-8.FC3
alsa-utils-1.0.6-3
No no, here:
http://oss.sgi.com/LDP/LDP/linuxcookbook/html/cookbook_27.html#SEC377
Is the OGG cpu intensive for your alsa architecture? [http://alsa.opensrc.org/Ogg]
Troubleshooting sound on Linux to narrow down the issue: [http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
References: [http://www.alsa-project.org/main/index.php/Minivosc]
[http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
I am sorry, this is where I can no longer help. Please seek the guidance of the Linux forums or that alsa mailing list.

Audio/video out of sync (audio delay) with PowerBeats wireless earphones.

I am having a problem with audio/video sync between my PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?

I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored. Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.

Audio Video Input

I have a QIP6416-2 box and in order to get video, it needs to be connected via the Audio Video jack. I only have one input on my TV so I am unable to connect my DVD player. I was told the he Audio Video inputs on the box are disabled by default so I cannot even use them to to connect my DVD player. Verizon is severely limiting the ability to connect other electronics for the customer's viewing pleasure. Why are they disabled so hey cannot be used?

CSHopkns2 wrote:
I have a QIP6416-2 box and in order to get video, it needs to be connected via the Audio Video jack. I only have one input on my TV so I am unable to connect my DVD player. I was told the he Audio Video inputs on the box are disabled by default so I cannot even use them to to connect my DVD player. Verizon is severely limiting the ability to connect other electronics for the customer's viewing pleasure. Why are they disabled so hey cannot be used?
get an audio video switcher for $10. dont expect verizon or box maker motorola to provide all these extra features because you old tv has 1 input. all modern tvs have multiple hdmi and audio video inputs. id like my cable box to do my dishes but i know its not possible.

Audio/video separated

hi, i would like to know, how can i separate audio from the video in final cut? ,because every time when im working in my timeline its the video / audio together , if i erase audio ,also the video its erase,how can i work separate?

The command that you are looking for is called "Linking".
In the upper right corner of your timeline are 2 buttons, one looks like a chain. Click that button to enable/disable linking.
Another thing that I'd recommend you read up on is "Destination Controls". This is the tab system on the left side of the timeline. You can use those tabs to control where your various audio/video tracks are edited into your sequence.

CUCILYNC with Lync Audio/video settings enabled supported ?

Hello,
for one of my customer I want to install CUCILYNC and Cisco Telephony for a part of the users.
Actually this customer user LYNC for IM/Presence and use the Audio/Video feature for making audio and video calls and conference calls.
In the CUCILYNC configuration guide, Cisco recommends to edit all the CUCILYNC users in the LYNC server to change Telephony settings to Audio/Video disabled (Recommended).
Is it possible to keep this audio/video settings to enable and to have 2 ways to make Video and audio calls : with Cisco capabilitites and with Lync capabilities.
does it work ? If yes, how does it appear on the end-user client ?
is it supported by Cisco ? And Microsoft ?
has anyone making this kind of configuration before ?
Thanks in advance for your help,
Regards,
Baptiste Croizer

Yes it works, it's just confusing to users as both buttons are lit up. If you set the registry key to IM only all of the Enterprise Voice-related buttons are greyed out.
Each vendor supports only their pieces.
Please remember to rate helpful responses and identify helpful or correct answers.

Audigy 2 NX - audio/video skipp

Here is my system spec:
Mobo: ASUS A8NE-FM
Processor: AMD Athlon 64 X2 Dual Core 4200+
Graphics: ATI Radeon X800
Memory: 024mb
HDD: 300Gb
Sound: Audigy 2 NX (note: onboard sound has been disabled in the BIOS)
OS: Windows XP Home SP2
I ran the Audigy 2 NX on my laptop for about a year without problems. The card is now on my new PC (specs above). For a while I was running the card using only generic drivers, but because of this had no real control over my speaker levels, could only use 2 speakers, etc.
I have installed the Creative drivers now and find that whenever I play a song, watch a video, etc, basically anything that uses sound, things are sped up or skip (the videos will skip to keep in time with the sound).
I find that if I go to the Device Control whilst audio/video is playing, and change either the sampling rate or the bit depth and apply the change, everything works as it should.
However, once the application using sound ends, the problems start again, as soon as another program tries to use sound.
Again, changing the device control settings will fix it each time. It doesn't make a difference what combination of the settings I use.
This has also had adverse effects in games, such as GTA:SA where the whole game tries to keep up with the increase in sound, meaning vehicles, characters, basically anything that is animated moves exceptionally fast.
I have tried all the different levels of hardware acceleration and found no improvement, I am running the latest drivers and firmware and frankly i'm out of ideas.
I had thought it would be a USB issue that would be fixed by applying the latest update, i.e. with the USB 2.0 fix for SP2, but no such luck.
Hope someone can suggest something cause I don't have the cash to buy an internal device, however much i'd like to (sucks being a student).
Thanks
FozZ
p.s. I have already tried formatting, please don't suggest thatMessage Edited by Monophobe on -02-2005 04:3 PM

Monophobe wrote:
Seems that Quake 4 no longer works since putting the drivers on, I get a "Quake 4 has encountered an error and has to close". The compatability issues with these drivers are shocking, please sort them out Creative.
FozZ
Have you tried updating your OpenAL drivers? Worked for me...
http://openal.org/downloads.html

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

IDVD 08 audio/video sync drift toward end of DVD movie - fix/workaround?

Anyone know how I can fix this issue? It's driving me crazy.
I've just spent a few evenings in iMovie 08, editing together the video of my son's birth. All looked & amazingly good in iMovie. The "Large" .m4v file output by iMovie - Shared with the Media Browser - plays perfectly in Quicktime too.
However, after adding that shared movie to iDVD 08, and burning a DVD, I noticed that the audio sync drifts toward the end of the Movie when plated back. At the start of the DVD all seems well, but by the end of the ~1hr 20 minute movie the audio is unbearably out of sync with the video. Completely unwatchable.
After a little Googling I came across some reports that iDVD might not deal well with video that's been recorded with 12-bit audio. I've confirmed that my camcorder is (was!) set to 12-bit rather than 16-bit (the default, I'm sure). So if that's the problem I'm hosed... it's not like I can get a retake on that footage
Is there a reasonable workaround for this issue? I'm obviously unable to re-take the video (or the other 10 hours of DV video tape I've yet to use in an iMovie project). Ideally I'd like Apple to release a patch for this. Shouldn't it be possible for iDVD to account for audio that was originally recorded in 12-bit... even if it's just a checkbox you have to select to tip it off?
Then again, perhaps this is totally unrelated to the 12-bit issue, and this is just a run of the mill bug?
As I said... iMovie generates a MPEG4 video file of the Movie that looks/sounds perfect, so it seems this sync issue's being created somewhere in iDVD as it's rendering the audio/video to burn to the DVD...
Thanks in advance.

I've tried most of the options I can think of, and the audio sync drift issue continues on this ~1hr 12 minute iMovie/iDVD 08 project.
A couple of promising ideas tried used QT Pro, to export the audio track from the iMovie generated MPEG-4 file - as a WAV file, resampling to 48kHz and 16-bit... then Adding this back to the video track in the MPEG-4 file (having deleted the original audio track). In another test I also tried the Add to Selection and Scale option. Oddly enough I think the Add to Selection and Scale attempt generated more sync issues than before in the final DVD movie... so I stuck with the MPEG-4 file containing the video track and the added, resampled at 48kHz & 16 bit, WAV audio track.
This was saved as a self contained Movie file, producing a QT .mov file. I moved this .mov file into the iDVD projects directory structure so that it was avalable in iDVD's Media Browser. I then reworked the iDVD project to use this QT large.mov file, instead of the original iMovie large.m4v file.
As a reminder... the original large.m4v file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
AAC, Stereo (L R), 44.100 kHz
0:01:12:07.16 duration
The resampled and saved QT MOV file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
0:01:12:07.16 duration
BOTH versions of this Movie file play flawlessly within QT Pro... there's no audio sync drift evident toward the end of the movie unless I use iDVD 08 to burn either movie file to a Physical DVD (or DVD Disk Image). In both cases the resultant DVD Movie exhibits significant audio sync drift as the ~1hr 12 minute movie progresses. The sync goes out by ~ <= 1 second based on a rough visual assessment.
I've not yet tried to burn either the original iMovie produced MPEG-4 video file or my QT Pro tweaked audio track .MOV file version to a DVD on my PC...
... But I have used an application called Burn (referenced in this earlier/archived iDVD sync drift forum post: http://discussions.apple.com/thread.jspa?threadID=1332100 by user F Shippey - http://burn-osx.sourceforge.net/) to take the QT Pro tweaked .mov file version of the original MPEG-4 file and burn it to a DVD...
Results:
The Burn app burnt DVD plays with NO audio sync issues!... Even though it was generated from the same audio tweaked (48kHz/16-bit resampled) QT Pro .mov file.
However, whenever I burn a DVD using iDVD 08 the audio sync gradually drifts. It matters not whether I use the original iMovie 08 generated MPEG-4 movie file, or the QT Pro version of that file with the resampled audio track (the same one that works fine with Burn).
It sure looks to me like iDVD has a problem... Again, refer to http://discussions.apple.com/thread.jspa?threadID=1332100 for someone else who seems to have run into similar challenges.
Am I overlooking something?
Thanks in advance.

How do I connect an iPhone 5S or 6 with audio video cables?

How do I connect an iPhone 5S or 6 with audio video cables? Our van only has these connections. Apple did have a cable that worked with the 4/4S, but it does not work with an adapter on the 5S. I want audio only.

I Thought I probably was.
something like this should work then, right?
Belkin Y Audio Cable (12 foot) https://www.amazon.com/dp/B000067RBT/ref=cm_sw_r_awd_fYWzub11XY5MQ
OR
eForCity 3.5mm to RCA Auxiliary Cable Cord for iPod/MP3 https://www.amazon.com/dp/B0042DIZTE/ref=cm_sw_r_awd_R0Wzub1X33PD9
thx SO much )

Audio / video sync issue in playback

for every recording i've made, when i play back the archive there is noticable lack of sync between the audio and the person's mouth. the video seems to lag behind by almost a second. the good news at least is that the delta is constant.
has anyone else experienced this? it's happening in any scendario i try, even if i'm just recording myself.
is the LCCS dev team aware of this? since audio and video streams are recorded separately, is there any way for me to programatically 'nudge' the streams into sync?
it's currently a show stopper, it looks really bad when the sync is so obviously absent.

finally getting back to this..
i did as you suggested and recorded a video of myself using the recording and playback examples provided with the SDK (the 2.2 newest version btw).
the de-syncing of audio and video is definitely there. it seems especially bad for longer recordings. however, an interesting thing i discovered in playback:
- sometimes, if i drag the playhead somewhere in the recording, pause, and then hit play, video and audio fall into sync.
- if i start playback from the beginning of the recording, audio/video is always out of sync.
i understand that the video and audio streams are recorded separately and thus played back separately. my guess is that when those streams are retrieved and playback begins, one starts before/after the other because they're not retrieved at exactly the same time. it seems some extra work is required to ensure that their playback commences at exactly the same timestamp within each stream.
i can provide my recordings as an example if required.
this is a total showstopper for me. it renders the entire recording service useless if the playback can't have sync between audio and video. i would be happy to help with testing this more. can someone from the LCCS team comment on this issue?
thanks
adam

Audio video adapter problems

Please help me. When I connect my iPad 2 to my t.v via hdmi with my audio video adapter, nothing shows up on my t.v. I have an L.G HDTV. When I connect it to my HDTV it just says no signal. And nothing shows on my t.v. Please help me.

Settings-video-tv signal set to proper format?
Turn tv off, connect the adapter, make sure iPad on and ready, turn tv on.
More than one hdmi port? Try switching ports.

Audio/Video (Adjustments Disabled)

Similar Messages

Maybe you are looking for