Audio & Video Call Recording Solution for CUCM

Hi,
I am looking for a audio and video call recording solution for CUCM. The requirement is the recording system shall record all audio & video calls including incoming, outgoing, and station-to-station calls. One cirtical requirement is: The users on the CUCM system shall be able to record video calls for video equipped stations with a push of a button on their Cisco IP Desk set or their Cisco soft phone.
Does anyone know the product or third party vendor who supports audio and video recording for CUCM?
-Thanks
Vaijanath

Currently Cisco doesn't support video recording with a push of a button on their Cisco IP Desk set or their Cisco soft phone. Also, I have checked with the third party vendors and they only support the video recording using Passive Call recording (port mirroring).
http://www.verba.com/cisco-call-recording-solutions

Similar Messages

  • Recording solutions for CUCM/CME.

    Hi, all!
    I have a questions about call recording solution for CUCM and CME.
    - Does Cisco Media Sense support call recording for Call Manager Express?
    - Will Media sense write all calls, including calls via PSTN to any DN, or only DN to DN calls?
    - Can it be used for call recording in CUCM?
    - Network-based call recording feature available only in CUCM 10 or early versions?
    - What is disadvanteges and benefits of span/rspan call recording solutions?

    Here are a few
    http://www.telrex.com/callrex.htm?gclid=CM3p4_em5oQCFSfTJAodVxw8RQ
    http://www.call-replay.com/?gclid=CLG277in5oQCFShsSQodtyXIjQ
    Hope this helps.
    Please remember to rate all replies

  • Bandwidth required for Lync 2013 audio video call

    Hi,
    what is the required bandwidth required for  lync 2013 audio video call from out side of company network. considering users will use owa integration with exchange 2013  for audio video call. 
    i tried with lync bandwidth calculator but could not figure it out. 
    actually i have some remote site where users have connectivity of 160 kbps only.

    There are a number of variables such as call type and video resolution, but I would suggest using this table as a guide:
    http://technet.microsoft.com/en-us/library/jj688118.aspx
    For example for capacity purposes with a Lync peer-to-peer call you're looking at 57Kbps (86 with FEC)
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Skype video call recorder?

    Is there any apps available to record the skype video call? That should happen in the background while I am in Skype call. How?

    well, I searched the link on Skype forums and found that they are on Skype official website as well.
    Download it from here : http://shop.skype.com/apps/Call-recording-audio-video/SuperTintin-Video-Call-Recorder.html
    Hope it will help you.
    Thanks

  • Recording solutions for CCME

    I would greatly appreciate for any suggestion with regards recording solutions for CCME. So far we have tested ANDPhone solution but our customer insist to have a windows based solution.
    Please advice,
    Vladimir

    Here are a few
    http://www.telrex.com/callrex.htm?gclid=CM3p4_em5oQCFSfTJAodVxw8RQ
    http://www.call-replay.com/?gclid=CLG277in5oQCFShsSQodtyXIjQ
    Hope this helps.
    Please remember to rate all replies

  • Skype video call recorded and blackmeeling

    Me also firt got kne reqedt from fb then on skype..and my personal she taken and upload on youtube and she taken all my friends profile link on fb and balackmeeling for money.what i do?any solution i sended money already but if she ask moren and more i cant
    ..

    myth.
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
    SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
    | skypefordummies.blogspot.com | 

  • Are video calls recorded automatically? THIS IS W...

    Hello...
    I was video chatting with my fiance for three hours.  Since he lives across the country, its the only way I get to see him.  Well, he left skype up and running and went out of the room.  As I was sitting here, suddenly the image of his room from what I could see got scrambled then suddenly there he was in a different part of the room during an earlier part of our conversation.  The moving image was there for about ten seconds before scrambling back to the original image of where he had left.  I thought it odd and kind of unnerving so I was wondering if Skype automatically records video conversations.  I have regular ordinary run-of-the-mill Skype and so does he...Did we get hacked and recorded or is this done automatically?  I'm really worried about our privacy in our conversations.  I was wondering if anyone could help because now I'm afraid to talk to my fiance (whom I never get to see or talk to otherwise).  This is the first time this has happened.  Someone please help me!  

    Skype does not record calls and video calls.  Being a service with millions of users at any given time, I think it would be very impractical for Skype to record calls and video calls (and would violate the privacy of their users if they do).  Perhaps what happened is just a random computer glitch.
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
    SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
    | skypefordummies.blogspot.com | 

  • Click 2 Call and Call Recording Apps for Surface R...

    I think I know the answer to this, but it doesn't appear that Click to Call is a feature that is available for those of us on Surface RT.  Additionally, I can't find any of the call recording apps available through the skype site.  Anyone have any input on this?

    Hi and welcome to the Skype Community,
    1. Unfortunately "Click to call" is not available on Safari for iPad because the Safari Web Browser in iOS does not support the concept of plug-ins (like Safari on Mac does). That means Skype cannot hook into the browser to extend the functionality. 
    2. Just so I understand you correctly: You want phone numbers in Emails highlighted in the desktop application "Outlook 2013" as well, correct?
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • What is the 24fps Audio/Video Sequence Presets setting for?

    I don't understand what happens when I change the Audio/Video Settings > Sequence Presents to DV NTSC 48kHz -24. I would think this would make my sequences 24fps. But when I import anything into a sequence (I'm mostly importing still images) they still show 30fps. What happens when I change this setting to 24?
    I want to export my sequences at 24fps Targa to output to film and don't want any frame blending -- I just want a one-to-one frame correspondence.
    Am I doing something wrong? Is this the way to go?
    G4   Mac OS X (10.4.4)  

    Actually never mind, it seems to be displaying at 24fps now. Not sure what was happening before.
    Sorry for the mis-post.
    Scott
    G4   Mac OS X (10.4.4)  

  • IMac ichat to macbook pro ichat and vice versa: audio/video call/chat not working

    Hi and thanks for your time!
    no green video/phone icon appearing beside buddy name.
    audio status/video status under view of the menu bar are ticked. ( i noticed this happened after i added "appleut01" AIM and did a test call. grayed out prior to said test call)
    invite to video/audio chat under buddies list are grayed out even if buddy highlighted first.
    also tried changing port to 443 but when I do it automatically goes back to 5190...
    also, i've tried logging off/on, deleting my account and making a new one...
    basically followed suggestions from various threads herein but still cant video/audi chat/call:-)
    hope somebody can help^^

    Hi,
    Lets check a few more things.
    Some things are blocked from you changing them if the Mac User Account you are using has Parental Controls turned On.
    To Show Buddies with Video and Audio icons several places should be checked.
    1) with iChat Open go to the View Menu. In here both Show Video Status and Show Audio Status should be ticked  (Selecting it will toggle the tick On or Off)
    2) In the Video Menu the Camera Enabled item and the Microphone Enabled one should also have ticks.
    3) (we Looked already) The Connection Doctor should say you can Video or Audio Chat as well as whether you can 4 way Video chat and 10 Way Audio Chat.
    4) In the iChat Menu > Preferences > Video Section the Bandwidth Limit should not be set too low.
    At least the 500kbps setting is needed to do 4 Way Video Chats.
    It can also be useful to use this setting if your Internet Connection is much faster but varies a lot.
    5) Parental Controls will stop you Adding Buddies, adding new Screen Names/Accounts in the iChat Preferences, altering several things about existing Accounts/Screen Names that have been set up.
    If a Buddy has a Video or Audio iCon and it is a pale green them they are Busy.
    If 1) are set then you should have an Video icon next to your Own Buddy pic in the header part of the Buddy List window. (Whether it shows Audio or Video will depend on 2)
    What shows in 3) will depend on the other settings and what Internet Speed and hardware you actually have.
    6) IF the settings are On for the camera then we need to know if the System can "See" the camera.
    Go to the Apple icon Menu top Left.  Click About this Mac.
    Click More info to Open the System Profiler
    Use the Reveal Triangles to see the Hardware list then USB.
    Does this list the Camera connected to one of the Buses ?  (you may need to click the items in the panes on the right to see the info you need)
    It should list the details such as serial number, Maker, Firmware (possibly) and speed.
    7:19 PM      Friday; July 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Sharing a Skype video call recording via Skype

    [Topic title updated by moderator to be more descriptive. Original topic title was: "video"]
    While searching the various forums; I was not able to locate an answer to this question:  Can I create a 10 minute video on Skype (classroom prep demo) and then forward such to the appropriate party on my contact list via either Skype or email?
    I appreciate any assistance that you can render on this topic.

    I believe I can help, just download the TalkHelper Video recorder for Skype, it's easy to use and it's free.
    Record Skype calls, save Skype voicemails and video messages easily with TalkHelper Free Skype Video Recorder on Windows for FREE!

  • Need help on Call record software for Curve 3G 9300

    Please help me find application to record calls for my Curve 3G 9300.

    Hi pxajb002,
    Welcome to the BlackBerry family!
    When integrating an email account into BlackBerry Internet Service, old emails are not sent to your BlackBerry, only emails from the point you integrated, onward.
    Hope this answers your question!
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Call Accounting Software for CUCM

    Hey,
    Hey my company formerly used RSI Accounting solution with our CUCM Version 9 system, but we are looking to explore alternative third party solutions. The new call accounting software should be:
    1)A Cisco Certified Developer Partner or Preferred Solution
    2) Compatible with all versions of CUCM( 7x-10x)
    3) Has ability to generate rich informative summary call cost reports
    4) We have multiple phone carriers and we need the software to be able to customize the call tariff rates to mirror as close as possible our local tariffs to be able to have accurate call costing
    5) The software provider must have good technical support in case of problems during installation or normal operation.
    6) send email alerts if any user is abusing company phone calls and be able to identify toll fraud events or prank calling
    Can anyone suggest any Cisco Partner party who satisfies the above criteria. I would appreciate any feedback.Thanks.
    Regards,
    Ryan Gosine

    Hi,
    With my company MAF InfoCom we provide solutions to capture, process and rate CDR’s from Cisco platforms.
    Our Call Management, Call Accounting and Telecom Expense Management solutions are very user friendly and cost effective.
    If you need more information please reach out to me via our website www.mafinfo.com
    Frank Looijesteijn

  • Skype audio Video call on Androi Micromax A92 smart phone

    Hi, I am not able to use skype in my Micromax A92 mobile phone(Android 4.1.2). When I call to some one call reciever cant hear my voice and I can hear my own voice with some noise. When I do call test echo sound test that time, I can hear my voice clearly. Mic check is working and showint mic is fine. But during call this problem I am facing.I tried after factory reset my mobile and tried several time unistalling and re-instaling Skype. but same issue. Kindly help. IF possible kindly mail solution in my personal mail id also. ([e-mail removed for privacy and security])Name :- Rahul GuptaMobile number :- +971-[removed for privacy] Abu Dhabi.

    Hi Rahul Gupta
    How are you?

  • Obtaining a call record/log for proving a relation...

    Hello,
    Is there a way to obtain a call log with a contact on Skype for a Mac OSX? I thought it would be easy to obtain but I can't seem to figure out how to get one.  I need to prove my relationship with my fiance to immigration as we are applying for a UK visa.  ANY help would be so greatly appreciated, thank you!!

    awanjee wrote:
    Hello,
    I am a new user of Nokia E72. I just want to know that how can i add the number from log. I mean i want to send a message and contact is not in my contact list but it is in my call log history?
    Regards,
    Message Edited by awanjee on 02-Dec-2009 09:38 AM
    Open the log and the specific number-> options-> save to contacts
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Maybe you are looking for

  • Ipod Touch 2G cannot be restored

    Hi, I have an Ipod Touch 2G that is stuck on the loading spinner and it does not boot at all. First I tried to reset my device by pressing both Sleep/Wake and Home button but I didn't work, I just came back to the loading spinner screen. Second, I tr

  • Header autentication Receiver HTTP (soap-axis)

    hi, I need to place the authentication in the header to the SOAP receiver channel is for soap-http axis. Place the authentication module, but the monitor shows pi invalid username and password. Was entered in the module, but does not work ParameterNa

  • Copying values

    Hi in my requirment i need 3 dates report date,posting date and asset value date...Have already got the report date and posting date now have to get the asset value date..actually the posting date start date is the "from date" of asset value date and

  • Open the URL for self-registration

    Dear Experts, If I open the URL address of the self-registration form in my computer at work (when I have the SRM implementation), the form is open and I can fill it and send it to the self-registration system. I tried to open this URL address from h

  • My blackberry curve 8520 wont connect boot room.

    I recently wiped my device then I tried to reload the OS I could not load because it got stuck on connecting to boot rom. When ever it tries to connect boot rom my device restarts and say USB not recognized.