Audio/video not syncing on a PC with i-tunes movies.

Recently started having a problem with the audio and video of my itunes movies on my PC. Had no problem for the longest time, years. I get up to 3 seconds gap, video ahead of audio on every movie I play. If I pause for a few seconds, the audio/video sync but shortly after, start to separate again. I reinstalled i-tunes, reinstalled my movies one at a time from the cloud. If helpful, for some unknown reason, all my movies recently were deleted from the hard drive memory but were still available from the cloud. Don't seem to have the issue when playing movies on my i-touch. Audio on the computer while playing a movie seems to have pops or quick gaps when the a/v is drifting apart. These are memory resident movies not played from cloud storage. 

Hey Pedsrndad,
Thanks for using Apple Support Communities.
Looks like your sound and video are out of sync. This article explains how to troubleshoot that issue.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Have a nice day,
Mario

Similar Messages

  • Xvidcap: Audio/Video not syncing!

    Big issue, it syncs fine for 20~ seconds then it starts eventually desyncing with the sound and after a few minutes it's waaaaaaay off.
    This is with ffmpeg recording, tried other ones with the same effect... Any ideas?
    Google couldn't help me.

    Possible leads:
    1.) There's some talk on the SourceForge xvidcap FAQ about the RPMs having a sync patch which is only in SVN normally... this is likely old, though... maybe ask the devs?
    2.) Are there any cli options for xvidcap? I know there's a config file, too.
    3.) Dynamic audio/video desync means either it's trying to record at the wrong framerate or audio frequency, or your player's bad, or the PC's too slow. Try another (fast) PC with another player, try tuning the options (use Google to help). You might (definitely possible, depends on whether you can find the right values) also be able to edit the finished video to change the FPS / audio frequency - AviDemux might be able to do it. Probably not a long-term solution, though.

  • Audio/video not synced

    I installed Desktop manager 6.0.0.40. I used it last week to copy some videos to my Storm 9520. It appears that audio and video go out of sync. Not at the beginning of a movie, it gets worse the longer the video plays.
    Until last week I used one or another free program for a couple of years without any problem. Just to check I copied a video with this program to my Storm today, and then there is no problem. So it is clearly the new desktop manager that gives the problem. Anyone else experienced this and knows how to solve it?

    I've seen this with some videos and not others.
    The software is transcoding the video (making them smaller and playable on the phone) . . . and sometimes they get out of sync I guess.

  • ITunes 11.01 on Windows 8 audio will not sync with video

    I have a new computer that is running Windows 8, and I have had no issues with iTunes 11.01 thus far on it other than the fact that when playing videos, the audio will not sync up with the video.
    With the ineptitude that seems to define Apple as of late, there does not seem to be any actual support for Windows 8, and the "support" channels do no good at all.
    Any ideas as how to fix this problem?

    I think Microsoft  made the Windows 8 incompatible with Apple products on purpose, they want windows users to have to download apps from their paid service which is more expensive than Apple's App/iTunes Store

  • My Video and Audio are not syncing up after importing

    I am trying to edit a few Ipad Clips in premier pro.  My video and audio are not syncing.  They are .mov lower resolution from the ipad.  The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead).  I did not add any affects or change anything.  Please advise?
    Thanks for any help in advance.
    Allison

    Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

  • Audio and video not sync

    Hi I'm having trouble with my records, i just shoot two videos for my vlogg and one was fine and the next one the audio is not sync with the video, didnt change any settings so dont understand wha happened. can some one help me fix this. thanks

    Using the inbuilt camera on your MacBook Pro can result in audio not syncing with the video, due to the variable frame rate used by the camera.
    See the first post by AppleMan1958 in the following topic for a full explanation and possible solution:
    https://discussions.apple.com/message/21404008#21404008
    John

  • TS1718 Movie audio does not sync with movie

    Hi,
    The movies I have bought through iTunes store does not work properly. I bought two last week and when trying to play them back over the weekend, the audio is not sync'd with the movie playback. I have a Winodws 8 laptop and enough space for the films to be played. The software is all up to date and can therefore see no problem as to why this should not be working. Does anybody know of any way to resolve this to allow me to watch the films?
    Thanks,
    G

    Hello grs1989,
    Thank you for providing the details about the issue you are experiencing with audio out of sync with video in iTunes.  I found an article with steps to address issues with audio and video playback being out of sync:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync.  They work fine when played in Quicktime.

    Hello,
    I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program.  It appears to work fine in Quicktime.
    Thanks in advance.

    mbgoodwi
    Thanks for the reply. This is the plan.
    Open Premiere Elements 12/12.1 to the Expert workspace.
    In the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, select the project preset
    NTSC
    AVCHD
    AVCHD LITE 720p30
    OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
    Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
    Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
    into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
    Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
    There should be no colored line over the content if the project preset matches the video properties. But, if you do see
    that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
    the Render button above the Timeline.
    Do your video/audio now play back in the Edit area monitor in sync?
    Please let us know the result, and then we will decide what next.
    Thanks.
    ATR

  • I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips?

    I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips? This is not hack/ripped video but a legit home movie.

    In this case, it looks like Quicktime wasn't very efficient in managing memory, leading to a slowdown in playback. If QT has a lag and VLC doesn't, that's more evidence.
    I couldn't say why your friend's windows computer plays the media fine, while your Mac doesn't. The only thing I could suggest is to disable QT streaming video - which has been known to slow down performance.

  • Captivate 7 - HTML5 audio/slides not syncing

    Hi,
    I am trying to publish out to HTML5 (Captivate 7 with the patch on Windows 7). I have audio on each slide and if I just let it run straight through, it's fine. However, if I page forward the audio is not sync'd with the slide anymore. It looks like it take a little longer for the slide to catch up but the audio starts right away.
    Also, if I go back and forth (I know this isn't right but I know learners are going to), sometimes I get audio from two slides playing at once.
    Is this just an HTML5/audio issue or is this a Captivate issue?
    Thanks,
    Joy

    Sreekanth,
    I think I've found a workaround for this issue. I’m finding when audio is placed on each question slide in the pool, the audio on subsequent slides play. The audio on the question slides has to be different from audio used on non-question slides (but all the question slides can use the same audio). Also, the question slide audio can be a very short and silent piece of audio, so nothing is heard on the question slide itself.
    Bruce

  • I can not sync my iPhone 4s with newest iTunes 11.0. What's the solution for that??? Thanks.

    Hi Guys,
    Please somebody help me. I can not sync my iPhone 4S with the newest itunes 11.0. I do not know why it is not working.when I start to do the backup copies,its not respondible at all. if I skip the backup,nothing happens,it is not sync any music or video to my iPhone 4S. I hate that,because 10.6 was working properly with my device,but this one is not. so please give me some instruction,what I should do.
    Thank you in anticipation.

    Hello, Jose. 
    Thank you for visiting Apple Support Communities. 
    If your MacBook Pro has an Intel processor and at least 1gb or RAM, you can upgrade your machine to the minimum operating system requirements for use with iTunes 11.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Cheers,
    Jason H.

  • HT201263 I did not sync my iPod Touch with iTunes and I have forgotten my password.  How do I unlock it?

    I did not sync my iPod Touch with iTunes and I have forgotten my password and now it is locked.  I have the recovery mode screen at "conect to iTunes", but iTunes is not recognizing it.  How do I unlock it?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I can not sync my iPhone 4s with the iTunes wifi sync due to an error saying it will resume when mobile restore floater 7 is available??

    I can not sync my iPhone 4s with the iTunes wifi sync due to an error saying it will resume when mobile restore floater 7 is available??

    I am having the same issue except mine was Floater-4. Anyone knows the answer, please reply. Thanks!

  • Contacts do not sync up to iCloud with Exchange email on phone

    Contacts do not sync up to iCloud with Exchange email on phone.

    Contacts Troubleshooting
    Contacts - Troubleshooting iCloud Contacts

  • My MacBook Pro will not sync address book changes with my IPhone.  Why?  It used to.

    My MacBook Pro will not sync address book changes with my IPhone.  Why?  It used to.

    Then you may have to try manually resetting the syncservices folder by following Julian Write's post (from https://discussions.apple.com/message/9274781#9274781):
    Ok, as you can't reset SyncServices in the "normal" way, you'll have to resort to the "other" way:
    Although it's not advised to do so in normal circumstances, you'll need to manually delete the SyncServices folder.
    Before doing so, you MUST make a backup of both your Contacts and Calendars:
    In Address Book, choose *Export > Address Book Archive...* from the File menu.
    In iCal, choose *Back up iCal...* from the File menu.
    Then, make a backup of the SyncServices folder located at:
    ~/Library/Application Support/SyncServices
    By backing everything up first, you don't risk losing anything.
    Finally delete the aforementioned SyncServices folder and restart the Mac. This will force Mac OS X to recreate the SyncServices folder, and hopefully fix your problem.
    I believe in Snow Leopard you can back up your calendar in File>Export>iCal Archive rather than File>Back up iCal as posted above.

Maybe you are looking for

  • Getting error during creation of recovery point and synchronization

    hi all i am using DPM 2012 R2 . i am getting following error during recovery point creation. No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found du

  • Omni 10 Windows 8.1 won't always charge

    Recently my Omni 10 has been intemittently refusing to begin charging when the power adaptor is connected.   When this occurs, the battery must completely drain before it will begin charging.  The charging brick is not getting hot.  I tried disabling

  • Viewing iPod photo on TV

    is it possible to use the audio video cables with the iPod photo to view song information on the TV while listening to music, i have been able to use it to view slide shows but i would like to have the song info displayed on my TV (a 2" screen is dif

  • From a green geezer: How to repair persistent iTunes permissions?

    1. Software/Hardware Overview:   OS 10.8.5   Model Name:          MacBook Pro   Model Identifier:          MacBookPro8,3   Processor Name:          Intel Core i7   Processor Speed:          2.2 GHz   Number of Processors:          1   Total Number of

  • Exact model from the serial code

    Hello, from site, www.cisco.com/public/scc/, can I determine the exact model of firewall, from the serial code? My device is not covered by the SMARTNet contract. Let me know,