Audio/Video Out of Sync While Using Media Manager

While viewing most video files through Media Manager, the audio is a fraction behind the video. It is not significant but it is noticeable. I have looked at the Media Manager sticky but the posts are on all different areas where the Media Manager is flawed.
Does anyone have any suggestions as to how to correct this issue? I may just go back to using my original set-up. It's very surprising how bad this application is. Any suggestions would be appreciated.

Hi mhiggins8450, I just read your post about the trouble you're having with the Media Manager.  Have you had this problem since installing the software or has this issue just started recently?  If it's been a problem since the beginning, you may want to look at removing the software and reinstalling a fresh copy.  The newest version can be found at:
http://www.verizon.com/mediamanager
If it's a problem that just started happening, you may want to try and reset the units.  The best way to do this would be to power down your PC, unplug the router and unplug your STB.  Leave everything unplugged for five minutes.  From this point, plug the router back in and wait for it to boot up (the Internet light will go GREEN when it's complete).  Now plug the STB back in and wait for the time to display on the front of the box.  Now turn your PC back on.  Test the Media Manager and see what happens.
If you're still having troubles, please don't hesitate to re-post or send me a direct message.
Thanks!
Karl
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

  • Buffering pauses and audio/video out of sync, single RTMP stream w/ simple embed

    Hello,
    I am running Flash Media Server on my dedicated CentOS host, and finally connected a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over 25% processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate. I fear the issue is server side, however port 1935 is open and in use, not firewalled on CPU nor the host.
    Any suggestions would be great.

    Hello,
    Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
    <object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

  • IMovie Problems: Photo import and audio-video out of sync.

    Photo import problem:
    Some times, I have problems importing photos onto my new project, the photos will appear to be that just one same photo when played. It does not transit to the other photos following the first, it's just stuck on the first. Is this just an issue with iMovie '11? Are there any other ways to resolve this problem?
    Audio-video out of sync:
    I've checked some other discussions but I'd like to raise this issue again for APPLE. There are problems exporting my 7-minute film - the video and audio go completely out of sync no matter what format I export it to. There are not a lot of clips used. I'm now trying the method to detach the audio files from the video, hopefully it works.
    These issues are bothering me, in addition to a failed firmware update on Mac OSX 10.7.2 a few weeks ago. I couldn't open my computer and I had to go to the Genius Bar to have them help me backup my files on my computer and reinstall the whole system again. Anyways, any help to the above iMovie issues are greatly appreciated. Just wish that Apple will address these current issues and not just focus on improving their products with awesome features ._.

    Hello,
    Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
    <object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

  • Audio/video out of sync (audio delay) with PowerBeats wireless earphones.

    I am having a problem with audio/video sync between my  PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?

    I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored.  Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.

  • Audio video out of sync?

    Every movie I have rented and purchased the audio is out of sync with the video. If I pause the movie sometimes it goes back into sync but doesn't last long before it goes out of sync again. I have been trying to resolve this issue for the past week. I have turned off everything on the computer that manages audio, made sure all drivers and software is up to date. I have uninstalled itunes and reinstalled. I've set itunes and windows bit rate the exact same and nothing seems to fix the problem. I am running Windows 8 on a new Samsung laptop, previously I was using a Gateway laptop with no problems. From my reasearch the past couple days i see this has been on on going problem with itunes users and I hope someone has a fix. I just rented a movie from Xbox Video and it worked perfectly. I think I am going to have to make the switch to Xbox but I have movies I have downloaded to itunes and would like to watch them.
    Any help would be appreicated.

    Hello bjwilson22,
    I was researching the symptom you describe and reocmmend this article named Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues found here http://support.apple.com/kb/ts1718
    It is pretty length, but also thorough and I feel has the best advice to help troubleshoot the issue.
    All the very best,
    Sterling

  • Audio/video out of sync on 'video' app

    Hi all,
    I own an ipad 2 (iOS 5.1) and have purchased video content from iTunes.  I've downloaded the content to my ipad and played the content via the pre-installed 'video' app but the audio is out of sync by about half a second.
    I have tried restarting the ipad and re-downloading/downloading other titles but the audio is still out of sync.
    Does anyone have a solution to fix this?
    Thanks in anticipation!

    This is a software issue..... do you have a bluetooth headphone?  If so, try watching a video with it and you'll see it better in sync.  iPad delays the audio to make up for the bluetooth normal delay of (150ms?)..... it seems that when you're not using a bluetooth device, it still delays the audio by that amount.

  • Photo booth - audio video out of sync problem

    Hi
    I'm using Mountain Lion 10.8.1 and Photo Booth 5.0
    Photo Booth has severe audio video syncing problems!! When I record a video, the audio is out of sync with the video.
    I managed to get it to "sort of" work: every time I want to record a video, I restart the program. I also wait a few seconds to say something after I started to record. Movies longer than a couple of minutes are always out of sync, even when I restart the program....
    Untill now I haven't been able to find a sollution for this problem. I searched the web and more people are having these difficulties and don't know how to fix it either....
    Maybe someone here knows the answer to fix this problem?
    I hope apple will fix this problem in their next update???
    Nice regards!

    Hi
    I found the solution for the audio / video sync problem in Photo Booth!!!!!
    Go to your Launchpad and open audio/midi configuration. Make sure that your input and output has the same settings. I changed the input and output to 2 channel 16-bit 44100,0 hz. And this did the trick for me!!
    Now I can record as many video's after each other without restarting the program and they are all synced one hundred procent!!!!
    PROBLEM SOLVED ;-)

  • Audio and video out of sync when using quicktime conversion

    hello,
    i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
    how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
    any help is appreciated. thanks a ton in advance.
    cheers,
    clay

    What format are you converting the HDV to?
    If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
    x

  • The video and audio are out of sync while watching movies with iTunes

    Anyone know why iTunes is playing movies out of sync?  I try to watch a movie on my pc with iTunes but the audio is faster then the video. 
    I have searched for an answer everywhere but haven't found one yet, so if someone could please help.
    It is updated as of this post with 10.6.1.7

    Repair your QuickTime.
    Control Panel > Programs n Features > highlight QuickTime, click CHANGE then REPAIR

  • Audio/Video Out of Sync (PE 10)

    I have read some posts regarding this, but they have not been helpful.
    I recordered audio/video with an ASUS Transformer Pad Infinity TF700T in 720p .mp4 format.
    When importing into Premiere Elements 10 on a Windows 7 (64bit) PC, the audio and video are sometimes out sync when editing, and when they are rendered to the final product, they are always out of sync.
    I have tried changing to other formats (.avi), as some people stated that variable frame rate issues can come up when using a non-camcorder to record video, but the .avi actually made it worse, to the point that only the audio played.
    I turned my PC off and on again, and killed all background actions on the PC.  The video plays fine in Windows Media Player and VCPlayer.
    If anyone has advice as to how to fix this, it would be greatly appreciated.  I've spent 7 hours on this project, and am more frustrated than ever.
    Thank you.

    nierielimladris
    I have downloaded your AVCHD.mp4 video, checked its properties, and studied its performance in Premiee Elements 10 Windows 7 64 bit from the point of view of import, playback of rendered Timeline in Edit Mode monitor, and playback of an AVCHD.mp4 export of that Timeline content. I stared into the monitor to watch the lip movements as the sound played  back. In any of the following I have not observed any out of sync audio.
    MediaInfo basic properties included
    a. AVCHD video compression, frame size 1280 x 720 @ 15.119 progressive frames per second (variable frame rate with minimum = 13.501 and maximum at 18.793)
    b. AAC audio, mono.
    Premiere Elements 10 project preset that I used was
    NTSC
    AVCHD
    AVCHD LITE 720p24
    In Project media, Interpret Footage told me that it recognized a frame rate of 15.0710.
    Rendered the Timeline content and watched the lip movement as I listened to the audio. No out of sync audio.
    For export,
    Share
    Computer
    AVCHD
    Presets = MP4 HD720p24
    under the Advanced Button/Video Tab, I set for 1220 x 720 @ 15 progressive frames per second. The export settings dialog under Advanced Button/Video Tab looked like the following
    I watched the playback of this AVCHD.mp4 export and again did not observe any out of sync audio.
    All video playbacks were with Windows Media Player 12.
    Have you worked specifically with the video clip that you provided for download? If you have and you
    found out of sync audio, then I am suspecting that this might be a system rather than a video problem.
    It is a way out stretch, but...there have been some strange display goings on with Premiere Elements 10 and NVIDIA video card drivers recently. For all these cases, the answer has been rolling back the video card driver instead of the typical "making sure you have the latest version of the driver installed". What video card are you using in your computer?
    Please review and then we can decide what next.
    Just a note...this is a public forum with many viewing. Please do not post anything that would invade your privacy or is of a personal nature.
    Looking forward to your follow up.
    ATR

  • PP CS4: .avi audio/video out of sync

    Hi, I just got Premier Pro CS4 because I felt too limited by Vegas Movie Studio.
    I started a new project and imported the video files I wanted to use, but I'm having a strange issue. When I import .avi files and scrub through them, the audio will not skip forward, it will continue to play in order from the beginning of the video. Also when I import .avi files, a ! appears in the lower right-hand corner. When I click on it, it says: File importer detected an inconsistency in the file structure of [file].avi Reading and writing this files metadata (XMP) has been disabled.
    This does not happen when I use .mp4 files.
    I suspect if I converted my .avi files to .mp4, the problem will be solved (I am testing this theory now), but I literally have over 100 .avi files and it's taking a long time to convert one file, let alone 100+.
    Does anyone have any suggestions? Do I need a codec? I have a DivX codec installed. Do I need to uninstall it/get a different one?
    Thank you for the help! I'm looking forward to using Premier once this issue is settled.

    Xvid is the open source version of DivX. They are very, very similar.
    I would convert all of the DivX and Xvid material to something that PrPro can handle perfectly. If SD material, on a PC, then DV-AVI Type II w/ 48KHz 16-bit PCM/WAV would be perfect.
    While some have actually gotten DivX, or Xvid files to Import, into PrPro, few have been without some fairly major issues, such as no Video, bad Video, no Audio, or horribly out of sync Audio.
    Those two CODEC's are delivery-only formats, and are not really meant to be edited later - only viewed.
    Good luck,
    Hunt
    PS - I use an older shareware program, DigitalMedia Converter 2.7 (Deskshare), and it works well with both DivX and Xvid, going to DV-AVI. However, Deskshare has vastly updated from version 2.7, so I have no idea how well the new versions work.

  • Importing Captured Video from XSplit. Audio/ Video Out Of Sync

    So, I have looked all over the Adobe site before posting this question. When I import video (regardless of using the file>import or dragging the file into Pr6 directly) the audio and video desync really really fast.
    I've seen some thins all over, but it seems people are dealing with old vhs files, and iphones. That certainly isn't the case here.
    I recorded my files through XSplit Broadcaster. It was a local recording, nothing livestreamed. I have never had issues with Pr6 or any sync issues before. When I view the file before importing, in windows media player, ebverything is perfect. Everything starts and stops at the same time, every action comes with a sound spot on. Nothing is out of sync. However, when I plug the file into Pr6, the playback goes mental. So, i figured that I could just encode the file, and maybe it was just a playback issue. This is very much NOT the case. When I encose the video it desn't get any better. This shows me it's definitely not just a playback bug, but something with Pr6.
    First of all, is this isolated to the most recent version? I havent recoeded in a month or 2, but I've never had any issues sending xsplit mp4 files through Pr6. Definitely not with audio/ video desync. If anyone could help me out here, i would be more than greatful. I don't have any leads because as mentioned already, everyone else was dealing with iphone videos or old VHS files. Mine are all Mp4 files, recorded locally and directly through XSplit Broadcaster, and the video plays perfectly fine in windows media player. The only thing I have to go off of, is something about constant/ variable frame rate. But again, I have never experienced this issue before through any xsplit recordings. In the meantime, I'm off to test other samples.
    I don't know if it helps, but the video in question is roughly 40 mintes long give or take. It's one of the longest videos I've has Pr6 process, but it sahould by no means be an issue. I have 16GB of ram available, and 9-10 are dedicated souly to Pr6 and it's encoder.
    I can not stress enough that I have never had any issues before over the past almost a year of using Pr6 to edit my videos. PLEASE respond only if you have potential ways to help me, not just for discussion points.
    Any help is greatly appreciated. I don't have a lot of free time, so I need this issue resolved as fast as humanly possible. Time is money, as they say.

    PPro does not work well with VFR video... sometimes not at all
    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    variable frame rate
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
    >Where do I find the frame rates for the 2 respectively?
    Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Find file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    To be sure your video and sequence match, go to page #5 at the link below and read about the NEW ITEM process
    The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5

  • Netflix Audio/Video Out of Sync

    My new AppleTV arrived today (yay!) and I quickly set-up and configured it. While generally impressed I'm observing that the audio and video for Netflix streaming are not synching up properly. I've got the ATV hardwired to my network and am not connecting via wireless.
    I have both the HDMI and optical cables plugged in I've tried audio over both interfaces and with the ATV setting for "Digital Out" set to on and off and all variations have the same synch issue.
    I've tested the same show with the Netflix app on my iPhone (over wifi) and using the OSX Silverlight player (hardwired) which both synch the audio/video properly.
    Anyone else experiencing this? Did you find a solution?

    I haven't seen any audio sync issues but I would like to drop a suggestion for those affected by this. I believe most televisions now now have a setting to compensate for this. (Well at least I know my Vizio 37" does.) My television has a setting (unique for each input) called lip sync and it's for correcting exactly this issue. Initially it's a feature for correcting out of sync problems between the television and satellite receivers which is actually a common problem. Most modern televisions should have a similar feature for fixing audio sync features. Doesn't hurt to dive into your televisions settings to see if you can correct your audio sync issue.

  • Audio & Video out of sync in itunes but not quicktime

    My audio and video has never been in sync in itunes. It has been years since I have been able to watch a movie using iTunes. When I use quicktime, everything is fine, but when I use itunes, the audio and video falls out of sync. I have tried all of the suggested steps from http://support.apple.com/kb/TS1718
    I am running iTunes 10.4 - 64 bit version
    I have Windows 7 64 bit
    6 GB or Ram, Quad core i7 920 cpu
    2x Nvidia Geforce 285 - I have tried running it in SLI and not in SLI
    I'm constantly updating my drivers and as of today (7/24/11) I have everything up to date.
    Does ANYONE know whats going on?! I love using iTunes, but this is just rediculous!

    I have the exact same issue, it is preventing me from using iTunes to purchase Movies and TV Shows.
    I too have an Intel i7 - 6GB RAM, and GTX 460.
    Drivers are up to date.

  • Quicktime audio & video out of sync in premiere cs5

    i filmed a video using the built-in isight camera in my new macbook pro and the QuickTime video recorder.  the videos look and sound fine, but when i put them into adobe premiere cs5 for editing, they audio and video get out of sync.  how do i keep this from happening?
    thanks!

    In most cases I convert to PNG format (Portable Network Graphics) rather than JPG. File sizes are larger than JPG but rarely prohibitively so (and if they are I will then use JPG) .
    Importantly, for this generally insignificant increase in size, you get a perfect lossless graphic with PNG.
    For example this whole screen capture (1920 x 1200) shot is:
      694K  PNG (lossless)
    2,341K  JPG (lossless)
      493K  JPG (standard lossy)
    Note that the forum scales images for display. To actually see it at full resolution you would right-click the image and 'Save As Image ...' to then view it in your favourite image viewer (I use VuePrint, XN-View and FutureixImager to view images).
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

Maybe you are looking for