Audio/Video ports configuration

Hi,
I'm trying to find a way to control/configure audio/video ports for receiving data. Would like to have 2 different ports, 1 for audio & 1 for video. Is that possible?
Alain

The command you're looking for is:
Get-CsService -ConferencingServer
Lync has some weird ones like this :)
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • Audio, bluetooth, & port configurations

    I configured my computer to connect to an in-car Bluetooth device.  the in-car device is primarily used to connect mobile phones via Bluetooth  but also has built-in features for Skype calling.  so, as I make calls using skype via the Bluetooth connection I can also hear any audio, such as music, playing the background (during the call).  When the call ends, however, the music can no longer be heard via the Bluetooth in-car connection and transfers back to my computer.  Since my Bluetooth device does not necessarily support connections that will allow me to play music without being on a skype call I was wondering what port is opened when a Skype call is made or more specifically what actually takes place when a call is made and how could I, for example, open up the specified port permanently--to allow me to listen to music through the Bluetooth device at anytime without being on a call?  How could i open the port or configure the function permanently (or automatically)? 
    i use windows XP. 

    dear friends,
    i would like to know how to use
    the bluetooth port using JAVA code to control a
    stepper-motor? please give me some sample code with
    explanations.Do you have a link to the assignment ?

  • Combined audio & video from iMac mini DVI & headphone ports to HDMI to TV

    I presently have my iMac connected to my Sony Bravia tv so that the video goes from the mini DVI port through a converter to HDMI to a 25 foot cable, a HDMI coupler and another 25 foot cable to the TV. The video quality is good since I use 24 AWG cables. The audio goes from the headphone port through a 50 foot 3.5 mm cable to a converter to RCA stereo cables to the tv. The audio quality is not very good with this setup and I would like to send the audio over the HDMI cable with the video so that I would have only a single cable over the 50 foot run and could use a HDMI wall plate for a neater installation. I am wondering whether anyone has tried this somewhat expensive solution to my kind of problem, and whether it worked. Atlona DVI + Digital Audio to HDMI Converter. Model: AT-DVID-HDMI

    Not sure if it would work. The audio input is described as +audio (SPDIF) input+ which is not analog or the Toslink optical digital. SPDIF is a digital format, so you would need another converter. And since the video input is full DVI, you'd need a different adapter for the iMac's video output.
    Considering the complexity, additional adapters, rather long travel length, and $199 price for the Atlona device, depending on what you want to show on the HDTV, you may want to consider an Apple TV. The older 40GB version is $149 at the Apple +Special Deals+ page. You can then stream your content wirelessly, and not have to worry about any cabling. But obviously, an Apple TV does not stream everything that that iMac can play, so it would only work if what you want to show is stuff you can play in iTunes. Plus you may want to see what Apple introduces at the 1/27 special event.
    The iMac's audio output port doubles as an optical digital port, with a Toslink adapter, so if the Sony Bravia has optical digital input, you may be able to run a Toslink cable. I believe 50 feet is too long, so you would need some type repeater at the midway point.

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

    my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

  • Problem with audio configuration that affects audio/video playback

    Recently, when I watch video on i tunes that sound and picture to not match up. Sound seems to be on-time but the picture is jerky and behind. I un-installed my video driver and reinstalled. Problem persisted. I started my computer in safe mode and it said there was a problem with the audio configuration that effected audio/video playback. I uninstalled i-tunes and re-installed and the problem still persisted. I'm at my wits end and it is driving me crazy. Windows Vista is automatically updated so that's not the problem. Please help.

    Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes for Windows: iTunes has detected an audio configuration problem

  • When I go to open Itunes I get a message that says "Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly.

    When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

    Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

    Hi B, thanks so much for helping me troubleshoot !!
    Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
    * Sound Playback Default Device = No Playback Devices.
    * Sound Recording Default Device = No Playback Devices.
    * MIDI Music Playback Default Device = No MIDI Playback Devices.
    All text in this drop-down box were light grey, and therefore unable to be selected or altered.
    I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
    Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
    Thanks again,
    Shell

  • Itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly

    I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.

    I'm having the same problem.  I have downloaded Itunes again but still the same problem.

  • Itunes has detected a problem with your audio configuration. audio video playback

    itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!

    See if this article will help:
    iTunes for Windows plays video files without any audio
    http://support.apple.com/kb/TS1696

  • ITunes has detected a problem with your audio configuration.Audio/video playback may not operate properly. Help please.

    I haven't used itunes here much just been playing the songs I had on it. Now i downloaded some more songs i plugged in my Ipod touch and it's not showing up and giving me the message above (Itunes has detected a problem with you audio configuration. Audio/video playback may not operate properly. I uninstalled Itunes and quicktime restarted computer and still the same thing. What is going on?

    Try reinstalling QuickTime, as this article suggests
    http://docs.info.apple.com/article.html?artnum=304424
    Other people have had luck with deleting their QT rpeferences file:
    C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\QuickTime\QuickTime.qtp

  • When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly

    When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly. I removed some unused programs from my pc before this happened and I think I may have removed something I shouldn't have.

    I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
    Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again.

Maybe you are looking for

  • Project Save Error - write access

    I am using PPro CS3 on WinXP SP2 at a business. I have full admin rights on my computer as well as all network drives. When i open a project and select "Save" I get the error message: "Could not open the project file with write access. The file may b

  • Video Playback Issues in iTunes, MPEG4 vs h.264

    Has anyone had a problem playing MPEG4 videos in iTunes? I'm not sure when it started, but I first noticed it a month or more ago with the commandn mpeg4 podcast feed. I switched to the h.264 feed and it's great. The audio if fine, but the video is c

  • Accessing managed-beans property from simple java class

    I have managed bean that is registered in faces-config.xml: <managed-bean> <managed-bean-name>documentReportsBean</managed-bean-name> <managed-bean-class>[myApp].beans.DocumentReportsBean</managed-bean-class> <managed-bean-scope>session</managed-bean

  • Will the new update erase all my iPad2 content

    Was just on the phone to the Support Express line ( re a problem that this forum had already solved for me) the guy said I needed to install the update but added its would erase all the content on my iPad. Have only had the ipad2 for 2 weeks and just

  • Phone stuck in recovery mode wont restore

    the other day i plugged my phone into itunes and it started to update the software but became frozen so i unplugged it. When i plugged it back in itunes detected a phone in recovery mode but it doesnt recognise the model, serial numberor name. when i