Audio Video Settings no longer seem to play back Timeline

For over a week I have been using these settings for my project
Sequence and capture Presets
AJA IOHD 1080i 29.97 apple pro res 422
Video playback AJA IOHD 1080i 29.97 Pro Res 1920x1080
Everything seemed to be working fine. This morning I tried some new settings and when I return to the original the no video will play in the tv monitor. I can still play clips in Log Capture mode but nothing in the source and record monitor.

check your I/O control panel make sure your downconvert is on 525 to your monitor if it is SD. and that "all frames" is checked in FCP view>external video

Similar Messages

  • Can't open audio/video settings, losing audio also

    Hi folks
    Get a general error (34) when I go to access audio video settings. I tried trashing prefs per the advice in another thread, but still get the error.
    When editing, audio seems to be working fine as long as I don't send it out to my monitor. Then the audio drops out completely. Audio and video playback is set to firewire ntsc, and audio follows video. On audio, the rest of the options are grayed out, so I was trying to get into the av settings to see what's going on.
    The setup has been working fine before but I don't recall if I changed any settings. Also it's FCP HD 4.5. Thanks

    I selected 'none' for video playback and it let me into the av settings. The only option not grayed was 'built in audio," so I selected that. Then back in my sequence, I chose video playback 'firewire ntsc." It then let me select audio settings and I chose built in audio." Then it worked.
    Hope this helps someone with the same issue in the future.

  • Full screen preview blanked out in from options in audio video settings?

    Hi all,
    Am running FCP6 and have lost the option to preview fullscreen in the audio video settings menu. It is literally missing, as an option, though the space the option inhabited is still there. Only options I have are to preview via firewire to my CRT monitor. I have tried to refresh AV devices and all frames, but doesn't seems to help/work.
    Any suggestions?
    Many thanks,
    -Tom

    Hi David and thanks for your suggestion. I gave it a try and no luck. Its just the same. I have no options in video playback at all unless I connect my deck and then I have only the via firewire options, the deck provides. BTW, I know its the wrong forum, but I have the same blanking out situation in the output filed in MOTION.
    Any more suggestions would be greatly appreciated.
    Thanks,
    -Tom

  • Canon XL2 & Audio/Video Settings

    HELP! I have looked some of the previous threads on this issue and tried changing settings, but am still having a mismatch between what voices are saying and lips moving after I capture and then play in canvas.
    I shot at 16x9, 24p 2:3.
    What are the best audio/video settings to use to be able to capture/edit and ultimately export to DVD while preventing this problem???
    I have latest version of final cut pro.

    Usually audio desyncronization (is this a word?) comes from the audio being recorded at 32khz and FCP looking for 48khz files. When you play back, FCP is madly trying to fix the missing 16khz and doing a bad job of it. the Audio often just wanders off into it's own world.
    Does it start in sync and drift or is it off the whole time?
    x
    By the way - "latest version" is not a useful statement. What are the exact versions of FCP, QT and OSX you are running?

  • Final cut pro audio/video settings

    Hello everyone:
    I'm new to the forums and somewhat new to final cut pro.
    I'm using final cut pro 5.0.4
    Im trying to record to a dvd record using a Sony DVCAM, but I don't know what the settings are for the audio/video settings are.
    What I want to do so play the project from Final cut to the dvd.
    Can anyone help me please
    thanks
    sandy
    PS I tried to exported it as a Quicktime movie but it do not work because I have photos (slides) that move.
    Message was edited by: nomadrw

    This is the quick and dirty way of doing it. Read the manuals (FCP, Compressor, DVD Studio Pro) for more information.
    Control-click on the sequence name in your Browser in FCP, and select Export > Using Compressor. The sequence name will then show up in Compressor. Select the sequence name that just showed up, and then on the top of the screen select one of the DVD:xxxxxx settings for your project. I would recommend the Best Quality options. You will see 90, 120, 150 minute options. Pick the lowest that you can without it being shorter than your sequence. For example, if your sequence is 92 min, select the 120 min option. You will need an MPEG setting as well as the Dolby setting. Once you have selected your presets, set their destination - use Desktop for now. When you have selected the Settings and Destination for the sequence, Click "Submit" on the lower right of the screen. Batch Monitor will pop up, telling you the progress. When the job has completed, open up DVD Studio Pro.
    Once DVDSP loads, you will see on the left side of the screen two large icons in the Graphical tab window. Select each one, control-click on it, and select Delete. Now click File > Import > Asset and choose each one of the files you encoded to your desktop. You should have an MPEG and a Dolby file. They will then show up in the lower left of your screen in the Assets tab once you have imported them. Select both at the same time, then simply drag them to the open space in the Graphical tab. It will create an icon like the ones you deleted. Control-click on the new icon, and select First Play. Put in a blank DVD, and then go to File > Burn. Once this is done burning you will end up with a DVD that you just put in your player and it will automatically play.
    Like I said, this is quick and dirty. Read the manuals, play with different settings, and get comfortable with each application.

  • How can I play online videos without many long pauses during play?

    I have current flash and 7.  Lately, all online videos have many long pauses throughout play.  They used to play continuously through.  Flash is enabled.
    How can I solve this?

    To help troubleshoot we'll need the following system information:
    Operating   system  
    Browser  
    Flash   Player version
    When reporting issues with video or audio, it's also helpful to get your system hardware and driver details.  Instructions for finding this information can be found here:
    Windows  
    Mac
    Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player.  I recommend trying both of the links below to see how they perform.  If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing.  You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
    HTML5   video  
    Non-HTML5 video

  • Videos taken with my iPhone 5 play back fine on my phone, but are too slow when imported to my PC.  Everything seems updated.  HELP!!

    When I take a video with my iPhone 5, it plays back great on my phone.  However, when I upload to my computer it plays back extremely slow, or the image freezes while the audio keeps going.  I've tried Windows Media Player, Quicktime, VLC media player, and they are all updated.  So is my computer software.  I never had this problem with my previous iPhone 3Gs. This is very annoying, help!!

    SharmFarm wrote:
    Good ev Ning Mario49    firstly I would like to say a great thank you for your attention to trying to help me,,,,,    i have looked at the links and will try everything stated first thing…
    Hi Mario,,,,
    I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
    I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
    Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
    Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
    Please advise,???
    I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
    Thank you again
    D

  • CUCILYNC with Lync Audio/video settings enabled supported ?

    Hello,
    for one of my customer I want to install CUCILYNC and Cisco Telephony for a part of the users.
    Actually this customer user LYNC for IM/Presence and use the Audio/Video feature for making audio and video calls and conference calls.
    In the CUCILYNC configuration guide, Cisco recommends to edit all the CUCILYNC users in the LYNC server to change Telephony settings to Audio/Video disabled (Recommended).
    Is it possible to keep this audio/video settings to enable and to have 2 ways to make Video and audio calls : with Cisco capabilitites and with Lync capabilities.
    does it work ? If yes, how does it appear on the end-user client ?
    is it supported by Cisco ? And Microsoft ?
    has anyone making this kind of configuration before ?
    Thanks in advance for your help,
    Regards,
    Baptiste Croizer

    Yes it works, it's just confusing to users as both buttons are lit up. If you set the registry key to IM only all of the Enterprise Voice-related buttons are greyed out.
    Each vendor supports only their pieces.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Audio/Video settings

    Requesting help on settings in FCP 7. I am bringing in footage from a Sony Z5u in 1080i, from a cf card with a fire wire reader. I plan to burn my edited project to DVDSD after sending to compressor. What should my settings be in Audio/Video settings tab in FCP for best results? No luck burning a presentable DVD so I'm starting from scratch trying to figure out what could be wrong. Any help appreciated. Thanks, John

    It's not the same, the issue is you're in NTSC. Standard def in NTSC is 29.97 fps.
    the "look" of the footage is different. there are no pulldown frames in 30 F.
    in 24F DV the pulldown is 2:3:2:3 to make up the frames required to run at 29.97 fps
    There are HD formats in NTSC which support 23.98 fps just no SD formats
    there are settings in FCP that will allow you to edit in 23.98fps Standard def but when it goes to tape a pulldown is inserted to bring the frame rate to 29.97
    The reason to offline edit in 23.98 DV is a saving in disk space and lower CPU demand than editing the full resolution of 4K, HD etc.
    The reason to edit in DV and stay there ie file based for compressions etc is you have progressive frames throughout the piece and that can look better on progressive scan monitors like a computer.

  • Easy Setup and Audio Video Settings (FCP7)

    Hello,
    I am a newbie editor in fcp 7. in fact, I´m newbie on pos production. I´ve been working and editing less than a year (Premiere Pro)
    Now I am using FCP7 (and FCPX) but my question is...in fcp7, why do I need Audio/Video Settings and Easy Setup if
    final cut has open format sequences?
    thx

    Well, strictly speaking on FCP 7 and earlier (since this particular forum is for older FCP...not FCX)...yes, you do.  You need to choose the Easy Setup that matches the footage you are using.  If you have multiple formats, try to convert the footage to a single format.  Don't belive this Apple marketting about "open format sequences."
    There are some exceptions...like you can have ProRes footage, and a ProRes sequence...and also edit in HDV or XDCAM footage in that. IN fact, it's best to edit HDV and XDCAM as ProRes.  Don't have an XDCAM sequence setting and edit ProRes into that...XDCAM is inferior to ProRes.
    Also...don't edit may formats natively.  Meaning H.264, MP4, AVCHD...there are many formats that FCP just doesn't work with properly. FCX will even ask to "optimize" the media...meaning convert to ProRes.  FCP 7 is a different beast than Adobe Premiere Pro. PPro will allow you to edit formats natively...it's designed to do that. FCP 7 is not....and that's a pretty important difference to know. FCP 7 wants media to be in FCP editing codecs before you start...such as ProRes.

  • Can audio/video settings be in HD and Sequence in SD?

    Is it a problem to have your audio/video settings set for HD, and your seqence set for SD?
    Is audio/video setting just for new projects? (I think my current project is SD, which is what I want), and I'd like to create a new project in HD.
    When my SD project is open, sequences are SD, and audio/video is HD. If the sequence is SD, doesn't that mean that the media files rendered on it are also SD- regardless of what the audio/video settings are?

    Umm, in a word, how much do you want to render?
    You do know that your clip properties must match your sequence properties otherwise you're in for a world of rendering.
    Reading a lot of these posts around here, there's a common conception that it's just a matter of rendering to create high definition video out of standard definition and going back the other way. I'm not sure where this came from other than a lack of understanding about video formats and then subsets of formats within those formats, namely ITU-R 709 (high definition video) and ITU-R 601 (standard definition video).
    When you cross formats, you're crossing more than just an aspect ratio and a couple of letters. There's the matter of gamma differences, color space differences, pixel aspect ratio differences and pixel count differences. When you up or down convert video, even on horrendously expensive hardware converters, where are all those extra pixels going or coming from?
    GU, if you don't know what video format your current sequence is in now, I would highly suggest some more self-education before you dive into high definition. You can start [here|http://en.wikipedia.org/wiki/Video_formats] and [here|http://electronics.howstuffworks.com/tv.htm] or perhaps I'm just getting crotchety in my middle age and expect people do to things properly. These tools are cheap, TV is easy, ain't it?
    Good luck with your project. Short answer from me is no, do not travel down your current path, learn how to do things the right way.
    Z

  • How do I change preset in audio/video settings

    I'm trying to capture some video from a friend's camera and have run into a problem.
    I'm getting an error message,
    "Capture preset must have a video or an audio digitized set to capture. Please change to desired preset int he Audio/Video Settings."
    I don't know how to do this.
    Help

    What kind of camera is it?
    MtD

  • Audio/Video Settings - Digital Cinema Desktop Preview

    "Audio/Video Settings - Digital Cinema Desktop Preview Full Screen" - is a hotkey toggle this?
    Message was edited by: caxa_fe

    Cmd-F12 after it's activated.

  • Hi Def video is jumpy and will not play back smoothly in FCPX

    I have the latest version of Final Cut Pro X only an older, but fully compatible IMac, and have a new Panasonic AG-Hmc 40P video camera. I have shot video on my Gro Prop Hero 2 and the playback of the unedited video is perfect, but as I scroll through the unedited footage shoot by the Panasonic, the video is jumpy and will not play back smoothly. The video plays perfectly on the the camera in play back mode, but in FCPX it is junk.
    Do I have an incorrect setting that is doing this? I adjusted the palynack in preference but that made no difference.  I need help?

    FYI...
    There's a hidden feature in Mac OS X Lion that you can use to convert your video footage to Apple ProRes with very little effort and to the right specifications...
    Bring your video footage into your desktop or hard drive and then select all of them, and then right-right click on one of them to bring up the options menu... select ENCODE SELECTED VIDEO FILES. Mac OS X will take care of the rest for you automatically.
    If this option doesn't show up, make sure to install those codecs I recommendad earlier...
    ProApps QuickTime Codecs v1.0.1
    http://support.apple.com/kb/DL1396

  • Recorded videos on iPhone 4S don't play back properly on PC

    I've been trying for about two weeks to get videos I record on my new iPhone 4S (iOS 6) to play back properly on my computer running Windows XP.
    Most recently I installed Filmic Pro 2. One of the reasons was to be able to record the videos in lower resolution, hoping maybe the reduced file size would help the files to behave properly on my computer.
    The video files I just recorded and transfered to my PC using DiskAid (in MOV format) play back perfectly in VLC Media Player, but when I play them using QuickTime there is just a black screen with audio. The same thing happens when I import them as clips in Camtasia Studio - only a black screen with audio when playing back the timeline. These videos are 1280x720 and range from 97 MB (about 1 minute) to 430 MB (about 5 minutes) in length.
    Regarding DiskAid, the previous version I had installed started crashing every time I ran it with my phone connected - it would crash as soon as it began loading the camera roll. I just installed the latest DiskAid update, and this version successfully copies videos from the camera roll to my computer without crashing. But there is the black screen problem with these videos.
    Does anyone have experience with this problem or suggestions that might help?
    Thanks!

    This solution that worked for me and i’m using Windows 7:
    Uninstall Quicktime 7.7.2 and reinstall the older version 7.7.1, here’s the link for it:
    http://www.oldapps.com/quicktime_player.php?old_quicktime=6769?download

Maybe you are looking for