Audio volume levels on MBP

My week 22 MBP is awesome and has no crazy noises. I do notice that when set to maximum volume using only the MBP speakers the sound isn't all that loud. Not as loud as I would expect.I have no way of gaging this but I was wondering if anyone else shared the opinion.
MacBook Pro 2.16 Mac OS X (10.4.6)

Anything under 4 bars is inaudible.. This is valid for both 15"and 17"models. However the sound on 17" is louder and better due to two extra speakers. Hope this helps.

Similar Messages

Adjusting Audio Volume Levels

Often, one has Audio that is too loud, or too soft. Sometimes, they have added a music Track, that needs to drop down to clearly hear the dialog from another Clip. While there are Audio-editing programs, like Audition, SoundBooth, and even the free Audacity, PrE, or PrPro can handle such adjustment just fine. These adjustments can be made for the entire Clip, or can be Keyframed over time.
First method, and not one that I recommend, is to adjust the Audio Gain of the Audio Clip. This is done by either Rt-clicking on a separate Audio Clip, or by first Alt-clicking, and then Rt-clicking on a Muxed Audio Clip (Multiplexed with both Video and Audio in one file). Then, one would choose Audio Gain, and adjust that. This method will also allow one to then adjust the Volume by a greater amount, and has the bonus of increasing the Waveform Dislay vertically.
The next method is to look at the Audio Clip (or the Audio portion of a Muxed Clip), and click-drag on the yellow-orange “rubberband” for Volume, and move it up, or down. This can be Keyframed, but the next method is much better and more precise, in my estimation.
My first choice is to adjust the fixed Effect>Volume. This is done from the Effects Control Panel, and it is very easy to Keyframe these adjustments over time. This is much more accurate, and actually easier, than click-dragging the rubberbands in the Clip itself. Accessing the Effects Control Panel is slightly different, from PrE to PrPro. In PrE, one would Select the Audio Clip, then go to the Effects Tab, and choose Edit Effects, locating the Volume Effects and twirling it open to view the slider. In PrPro, if one does not already have the Effects Control Panel in a Pane in the GUI, it would be accessed from Window>Effects Control Panel. With the Audio Clip Selected, one would locate the fixed Volume Effect, twirl that open, and make the same adjustments, including Keyframes, if necessary. These will be Clip Keyframes, and will follow that Clip, where ever you move it. This is a difference from the next method.
My other choice would be to use the Audio Mixer (Window>Audio Mixer, if not open), and to automate the Volume settings. This is accomplished by playing the Timeline and adjusting the sliders for Volume for each Track. In PrPro, one would first set the Send to Write, or Touch, to make those adjustments, then switch back to Read, when done. There are no adjustable Sends in PrE, so one is always in Read, until adjustments are made, and then it’s set to Write, but you will not see this change. After you are done, you can playback the Timeline, and watch the slider(s) automatically move. These will be Track Keyframes, and will remain on the Track, regardless of what Clips you add/remove from that area of the Track. Unlike the Clip Keyframes, these will NOT follow the Clip.
One can toggle the Keyframe of an Audio Track between Clip, or Track. Also, the default frequency of Audio Track Keyframes in PrE & PrPro is a bit high, in my opinion. I drop these down a bit in Edit>Preferences.
For the Keyframing, one can alter the Velocity of the Keyframes to Bezier from Linear, and the adjustments will be a bit smoother. Besides the Bezier, one can use Ease-Out and Ease-In, which are Bezier, but basically in a Preset. In PrPro, one has several different Bezier options. In PrE, one is a bit more limited.
For setting the Volume, I recommend that one only glance at the Levels Meters (unless they are peaking in the red), and instead use a pair of high-quality headphones (noise canceling models are worth the money), or fully calibrated studio monitors. Let your ears make the decisions for you, as the dB settings should only be a starting point.
In PrPro, one can also Rt-click on the Audio Clip, and choose Edit in Audition (if you have it installed), or Edit n Soundbooth (if you have one of the suites).
Here is a look at Audio Keyframes in PrPro 2.0. Things are similar in PrPro later versions, and also in PrE, with the above noted differences:

Here are some AdobeTV tutorial links for Premiere Elements Audio:
http://tv.adobe.com/watch/learn-premiere-elements-11/adding-and-customizing-an-audio-effec t/
http://tv.adobe.com/watch/adobe-digital-school-collection/audio-mixing/
http://tv.adobe.com/watch/learn-premiere-elements-10/get-professionalquality-sound-through out-your-movie-/
http://tv.adobe.com/watch/premiere-elements-9-how-tos/enjoy-a-perfect-balance-of-audio/
Hunt

Audio volume level on iMac

Here's a small issue that's driving me crazy...
I like to set the audio level to maximum on my iMac because I can control the volume from my attached speakers. Trouble is, everytime I re-start the computer I have to re-set the audio level. Is there some sort of preference I can set so I won't have to re-set levels every time I start up?
Thanks.

Sorry, I don't know how to make a link to
this.
Joanne,
To make a link, click the web address space/line (of the address you want to show as a link) three times and the address in the space will be covered by blue, go up to the "Edit" pull-down and select "Copy" then move the mouse pointer to where you want to deposit the link and again in the "Edit" pull-down select "Paste" to deposit the address.
http://discussions.apple.com/message.jspa?messageID=4270646#4270646
To create a link of that address, simply preceed the web address with this 1 character:<
followed immediately by this 1 character:a
followed by a blank space and then these 6 characters:href="
and after the web address follow immediately with these 2 characters:">
and then enter the name you wish to give the link:Update 10.4.9 has increased my volume drasticly
That "name" will be the part seen, the actual web address wouldn't be visible, as it is in the above example, but will look like the link example at the end of this explanation.
After you enter the name, immediately follow with the 1 character:<
and then without any space immediately follow with the 1 character:/
and then without any space immediately follow with the 2 characters:a>
Had to break up the explanation into pieces or else the result would be a live link and the explanatory symbols would not be visible, but would have looked like:
Update 10.4.9 has increased my volume drasticly

JMF Challenge - Create audio volume level meter for rtp Audio Transmitter

Based on the following code at: http://java.sun.com/products/java-media/jmf/2.1.1/solutions/RTPConnector.html
The challenge is to build an Audio level meter, you know the lights that go up and down to your voice like on a stereo Hi-Fi system.
If we can start with ideas, give it time the challenge will be complete for all to use.

Heres the finished codec code, it just spits out System.out's with the peak level.
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.control.SilenceSuppressionControl;//###### delete if no silence.
import javax.media.rtp.*;
import javax.media.rtp.rtcp.*;
import com.sun.media.rtp.*;
public class AudioLevelMeterCodec implements Effect {
    /** The effect name **/
    private static String EffectName="AudioLevelMeterCodec";
    /** chosen input Format **/
    protected AudioFormat inputFormat;
    /** chosen output Format **/
    protected AudioFormat outputFormat;
    /** supported input Formats **/
    protected Format[] supportedInputFormats=new Format[0];
    /** supported output Formats **/
    protected Format[] supportedOutputFormats=new Format[0];
    /** selected Gain **/
    protected float gain = 2.0F;
    /** initialize the formats **/
    public AudioLevelMeterCodec() {
        supportedInputFormats = new Format[] {
            new AudioFormat(
                    AudioFormat.LINEAR,
                    Format.NOT_SPECIFIED,
                    8,
                    Format.NOT_SPECIFIED,
                    AudioFormat.LITTLE_ENDIAN,
                    AudioFormat.SIGNED,
                    8,
                    Format.NOT_SPECIFIED,
                    Format.byteArray
        supportedOutputFormats = new Format[] {
            new AudioFormat(
                    AudioFormat.LINEAR,
                    Format.NOT_SPECIFIED,
                    8,
                    Format.NOT_SPECIFIED,
                    AudioFormat.LITTLE_ENDIAN,
                    AudioFormat.SIGNED,
                    8,
                    Format.NOT_SPECIFIED,
                    Format.byteArray
    /** get the resources needed by this effect **/
    public void open() throws ResourceUnavailableException {
    /** free the resources allocated by this codec **/
    public void close() {
    /** reset the codec **/
    public void reset() {
    /** no controls for this simple effect **/
    public Object[] getControls() {
        return (Object[]) new Control[0];
     * Return the control based on a control type for the effect.
    public Object getControl(String controlType) {
        try {
            Class cls = Class.forName(controlType);
            Object cs[] = getControls();
            for (int i = 0; i < cs.length; i++) {
                if (cls.isInstance(cs))
return cs[i];
return null;
} catch (Exception e) { // no such controlType or such control
return null;
/************** format methods *************/
/** set the input format **/
public Format setInputFormat(Format input) {
// the following code assumes valid Format
inputFormat = (AudioFormat)input;
return (Format)inputFormat;
/** set the output format **/
public Format setOutputFormat(Format output) {
// the following code assumes valid Format
outputFormat = (AudioFormat)output;
return (Format)outputFormat;
/** get the input format **/
protected Format getInputFormat() {
return inputFormat;
/** get the output format **/
protected Format getOutputFormat() {
return outputFormat;
/** supported input formats **/
public Format [] getSupportedInputFormats() {
return supportedInputFormats;
/** output Formats for the selected input format **/
public Format [] getSupportedOutputFormats(Format in) {
if (! (in instanceof AudioFormat) )
return new Format[0];
AudioFormat iaf=(AudioFormat) in;
if (!iaf.matches(supportedInputFormats[0]))
return new Format[0];
AudioFormat oaf= new AudioFormat(
AudioFormat.LINEAR,
iaf.getSampleRate(),
8,
iaf.getChannels(),
AudioFormat.LITTLE_ENDIAN,
AudioFormat.SIGNED,
8,
Format.NOT_SPECIFIED,
Format.byteArray
return new Format[] {oaf};
/** gain accessor method **/
public void setGain(float newGain){
gain=newGain;
/** return effect name **/
public String getName() {
return EffectName;
/** do the processing **/
public int process(Buffer inputBuffer, Buffer outputBuffer){
// == prolog
byte[] inData = (byte[])inputBuffer.getData();
int inLength = inputBuffer.getLength();
int inOffset = inputBuffer.getOffset();
byte[] outData = validateByteArraySize(outputBuffer, inLength);
int outOffset = outputBuffer.getOffset();
int samplesNumber = inLength / 2 ;
int valueMin = 255;
int valueMax = 0;
for (int i=0; i< samplesNumber;i++) {
int tempL = inData[inOffset ++];
int tempH = inData[inOffset ++];
int sample = tempH | (tempL & 255);
if (sample > valueMax) {
valueMax = sample;
if (sample < valueMin) {
valueMin = sample;
System.out.println((valueMax - valueMin) - 256);
System.arraycopy(inData,0,outData,0,inData.length);
// == epilog
updateOutput(outputBuffer,outputFormat, inData.length, 0);
return BUFFER_PROCESSED_OK;
* Utility: validate that the Buffer object's data size is at least
* newSize bytes.
* @return array with sufficient capacity
protected byte[] validateByteArraySize(Buffer buffer,int newSize) {
Object objectArray=buffer.getData();
byte[] typedArray;
if (objectArray instanceof byte[]) { // is correct type AND not null
typedArray=(byte[])objectArray;
if (typedArray.length >= newSize ) { // is sufficient capacity
return typedArray;
System.out.println(getClass().getName()+
" : allocating byte["+newSize+"] ");
typedArray = new byte[newSize];
buffer.setData(typedArray);
return typedArray;
/** utility: update the output buffer fields **/
protected void updateOutput(Buffer outputBuffer,
Format format,int length, int offset) {
outputBuffer.setFormat(format);
outputBuffer.setLength(length);
outputBuffer.setOffset(offset);

How do I get 10.4.8 AUDIO VOLUME back?!

My daughters' iMac G3 is like a freakin' megaphone now after updating it to 10.4.9. Why did Apple have to mess with audio volume levels? It was FINE the way it was. Now, in 10.4.9, the lowest volume setting is around the 50%-65% mark it was in 10.4.8.
I've ready other complaints elsewhere, now just want a solution. She's had it for months and we know the volume it produced, now, like I said, it's a megaphone and she even says its too loud (she's four).
Help!

The max OS for a PowerPC processor Mac is Leopard OS 10.5.x. All higher OSs require a Mac with an Intel processor.
Here's the instructions if you have the discs.
Mac OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274?viewlocale=en_US
Changing your administrator password
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
Here's one method to reset the password without the install disc:
1. boot computer and hold the "apple" key and the "s" key.
2. wait for terminal show
3. release keys
4. type without the quotes: "/sbin/mount -uaw"
5. press enter
6. type without the quotes: "rm /var/db/.applesetupdone
7. press enter
8. type without the quotes: "reboot"
9. press enter
This will let you create a new admin account when you reboot your computer.
Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
http://www.macobserver.com/tip/2003/06/16.1.shtml
Here is a way to get around not knowing the admin password on Macs.
To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
   1. Reboot
   2. Hold apple + s down after you hear the chime.
   3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
          * mount -uw /
          * rm /var/db/.AppleSetupDone
          * shutdown -h now
   4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
You'll have to buy (for over $100) a Leopard retail install DVD to get back to Leopard.
 Cheers, Tom

Control Initial Volume Level?

How can I control the audio volume level during the first few seconds before the theme menu is displayed? I found that I can adjust the audio volume during the display of the menu itself, but the lead-in volume is much louder and I haven't found any way to adjust it. If it matters, I'm using the "Marquee" theme. Thanks for any suggestions.

WIth additional searching I found another post on this topic from some months ago. I tried increasing the iMovie audio level. I'm burning another DVD now to see if that helps.

Hp omen audio volume so low after windows 10 upgrade

i upgraded to windows 10 and i find that the audio volume level is really low compared to how it was on window 8.1 i checked that realtek high definition audio driver is properly installed the volume now even when i max it out is really low its so hard to watch even youtube

It does appear the drivers were not included in the Windows 10 operating system and are not available for download on the driver page. They may be added in the future but for now we can only try using Windows Updates to install. If you go to Start > Settings > Update and Security > Make sure you're on the Windows update tab and select the Advanced settings button. Make sure the box to install optional updates is checked, and then check for available updates. Install any available updates and restart your PC. After this go into Device Manager and right click the WWAN adapter. Select Update driver software and let it search automatically. If it does not find the driver automatically try it again but select the option to specify a driver. You will get to a page that asks to select a vendor and model. Click the Windows update button to refresh the list of available drivers and look for your WWAN adapter. If you do not know which WWAN adapter is in your model (it should show the name but may show Unknown Device or Network adapter) right click on it, go to Properties and select the Details tab. Change the drop down to Hardware Ids and give me the first ID in the list. Thanks.

How to identify low volume/level audio segments in a recording?

Iam newbie to Audition and trying to edit/master a 2 hour long lecture done in a live setting (not studio). Since the speaker sometimes moves away from the microphone the level of the audio sometimes falls off or reduces sometimes for a few seconds to a few minutes. I would like to identify all segments greater than 5 seconds which fall below say -5db.
I have tried using Diagnostics >>Effect : Mark Audio and set a Custom setting. I defined Silence has : Signal is below -5 dB, For more than 5000 ms (5 seconds) and Define Audio has Signal is above -15dB for more than 27 ms. It works to some extent in the sense it marks the Proper Audio segments in between the segments that are between the segments that are identified/marked as Silence but I would like the opposite. I would like to get the segments which are defined as Silence to be marked.
I am sure it is possible to do in Audition, appreciate all your help in figuring out how to do it.
To do the same in Audacity is very straightforward, Go to Analyze >> Silence Finder and define Treat audio below this level as silence : -5dB, Minimum duration of silence : 5 seconds. Thats it. That easy.
Would appreciate help from all the masters in the forum. Thank you for your time in advance.
VS

Is what you are going to do when you have identified these sections to raise the volume. That can be done automatically without previously identifying them by using the Dynamic Processing or Speech Volume Leveling effects.

Export All Tracks as Audio Files ? about volume levels.

1. Do you export with each track at the volume level in the mix?
2. Or do you set the CS volume faders at 0.0 to get the maximum signal?
The first option allows me to recreate a mix with the volume levels already set.
But the second option gives me audio files at original record levels so that I can create a different sounding mix, or use audio regions in another project, setting levels as needed.
What's the better approach???

CSeye wrote:
I just started exploring Export Tracks to Audio and had the misconception that whatever fader & pan positions were set in the mixer would be rendered in the export. Good to know that Bounce is the way to go if that's needed.
Just be sure to UN check the 'include volume and pan info' esp if someone else is gonna mix for you
On the other hand for archiving purposes including fx and pan and vol is a failsafe way of doing things
My question is really about two situations: The most important one is archiving/future proofing a project, and the other is how best to share a mix with a collaborator.
Good information.
Best
Just make sure

Using compressor DVD Studio Pro 4 will only accept ac3 format in the burn process. ac3 makes a nnsense of the good sound delivered, 30% reduction in volume, auto volume levelling giving unwanted volume variations. Used to be able to burn using AIFF/WAVE,

AS Above. Edited in FCPX. Excellent sound file. Using Compressor 4 to DVD Studio 4. Wanting AIFF or WAVE sound for acurate sound.
Previously DVD Studio 4 has accepted AIFF etc and delivered sound as reuired. Now, during the burn process everything other than ac3 is declined as 'video bit rate too high', but will burn if the AIFF format is replaced with ac3 (which I presume meanss the 'video bit rate too high' is referring to the sound file)
The issue with ac3 format is the huge reduction in original volume and worse, the 'auto volume levelling' that makes a nonsense of the original soundtrack - with simply aweful unwanted variations in volume Throughout the the dvd.
I have tried everything I can think of to get around this. The 'volume gain' in compressor doesn't make any difference. Exporting just AIFF and the Video to DVD 4 doesn't make any difference, it always declines anything but the aweful sound ac3 delivers.
I have customers awaiting a musci DVD, not with thei quality I can't.
Cheers
Phil

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

Can I have multiple volume levels in one track?

I have a track composed of audio from a cassette recorder of a now deceased relative's voice.
Since the cassette was turned on and off during recording, the recordings are at different volumes.
I have been able to import the cassette into a GarageBand project, and delete dead space, but now I find that the volume is not consistent.
Any way to remedy that? I am wondering if I need to chop it up and make more than one track, and adjust the volume on each track? Will this work as long as the tracks don't overlap?
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
Or can I drag it right from GarageBand to iMovie?
Many thanks, I'm a very new GarageBand user.

JGolomb wrote:
Can I have multiple volume levels in one track?.
search GB's help for "curve"
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
"Share" it to disc
can I drag it right from GarageBand to iMovie?
no

Audio volume low when computer wakes from sleep - os x yosemite

I've been having an issue ever since I upgraded to OS X Yosemite, where the audio volume coming out of my external speakers is extremely low after I wake my computer up from sleep. The only resolution I have found is restarting the computer. Once I do that, the audio volume is great. If I were to boot up my computer after it has been completely shut down, the audio volume is also great. The issue only occurs after sleep. Anyone else having a similar issue? Is there another fix besides restarting the computer?
Speakers: Bose Companion 2 Series II (these are wired, not bluetooth)
Computer: Mac Pro - late 2013 - running Yosemite

This is a BUG. It has been submitted to engineering many times - unfortunately Apple has not done anything about it.   We have 5 Mac Pros, all 5 do the same thing after updating to Yosemite.   The PRAM / SMC reset is useless - we even installed a fresh OS on one of the machines (a suggestion of the level 2 Apple tech) same problem.   Clearly this is a system level bug.   Only way to get it resolved is to keep pounding the bug report site with requests.     The squeaky wheel gets the oil.   The problem is 100% repeatable on the machines that exhibit the bug.
In the mean time set up an applescript with this command and it will reset the sound - do not include the brackets :
<do shell script "sudo killall coreaudiod" with administrator privileges>
Run it every time you wake from sleep and you won't have to deal with the problem ever again.
Pretty lame that Apple has not fixed it even though the problem appears to be pretty widespread.

Macbook Pro 15" volume level changes by itself

Hi all!
About a month ago I have upgraded my rock-solid Macbook Pro 15" (mid 2012) from Mountain Lion to Mavericks. All seemed fine (with the exception of some known annoyances with WIFI) until last week when all of a sudden the volume level started to change by itself. It started going up and down, turning mute and turning on again and so on, just like an invisible hand or a remote access have taken control of my machine (it wouldn't even let me change the the volume using the volume buttons while this weirdness is happening). This has never happened before. To make things worse, I have then upgraded to Yosemite and all seemed fine but then the weird volume changes appeared again and I now am stuck with no straight forward way of reverting all the way back to the original Lion (which worked perfectly since Mac purchase back in 2012).
Can anyone help?
I have googled for similar issues and have seen some answers (mostly not that relevant) including a thread on this forum suggesting to reset the SMC. I have tried that using the suggested key-combination press, but it did not seam to have solved the problem, as the volime changes continue when I least expect it.
Is this a hardware problem? If so, would a change of the keyboard resolve things? [ At some stage I thought maybe the problem was caused by the fact the I have fiddled a little bit with the keyboard by lifting the :; key (next to L and under P) and applying a bit of WD40 to clean a tiny spil of sugary liqid that caused the key to get sticky. But the volume keys are way far on top of keybord so my assumtion was/is that the volume changes would not be related to the cleaning. ]
is this a software problem? Some thread on similar (not identical) issues had suggested there are some bugs in soft and Apple is aware. For this reason I gave Yosemite a go but the problem continues. Would reverting to Lion sole the problem you think? [ Maybe I should ask here if anyone can suggest how to go about this downgrade as Option-Cmd-R key-combination press at start up does not give me the Interner Recovery scree anymore, but keeps taking me (just like Cmd-R) straight to the OSX Utilities where can wipe of the disk (which I did) and reinstall Yosemite only. ]
I would very much apreciate any replies that might help me solve this issue.
Many thanks
Ty

HI Ty ..
Might be something you have no tried yet here > Troubleshooting issues with no audio from built-in speakers on Macs

ITunes 12.1 freezing upon launch due to "determining audio volume"

My (Late 2011) MBP running Yosemite is freezing when I launch iTunes. It is 12.1, the latest version. Upon launch, it says "Determining Audio Volume" and is on the first of my several thousand songs. The spinning wheel eventually pops up and I am forced to forced shut-down my mac by holding the power button. I can't delete iTunes as it is "required by the OS" and I can't open it and go to the preferences to uncheck "soundcheck" because it freezes the entire mac upon launch.
Anyone experiencing the same issue or know what might fix it?
Thanks

I had the same problem, but I think I've found a cure.
Even though Sound Check was disabled in preferences, iTunes would insist on Determining Audio Volume everytime it was launched. But there is also a 'Sound Check' preference in the Burn CD dialogue.
To turn it off you need to select a playlist, hit the Burn Disc button (bottom left) select Audio CD as the disc format and un-check 'Use Sound check'
Then you must hit the 'Burn' button (if you don't it will not remember the new settings) You can then cancel the burn by clicking the X in the itunes player window.
This has cured the problem for me

Audio volume is always maximum at start

I upgraded to Mac OS X Lion from Mac OS X Snow Leopard.
Before the upgrade when I reboot Mac OS X the audio volume is at the same level I left before.
Now when Mac OS X Lion starts, the audio level is always at maximum.
I think this is a little bug of the new OS.
Is there anyone with the same problem?
Does anyone have solved it?
Thanks you all.

Roberth wrote:Set the the desired audio volumes with alsamixer, run alsactl store, and start the alsa daemon and make sure it starts at every bootup.
SyXbiT wrote:
first let me say I've read other forum posts about the same thing, but none have helped.
All I have to do to get sound it move (up or down) my keyboard shortcut volume switch, and it magically turns on my sound. pretty annoying
I have alsa in my Daemons, and have run 'alsactl store' as root.
i even tried putting 'alsactl restore' in my rc.local, but nothing
groups:
tty lp mem wheel locate games dbus hal avahi network video audio optical storage power users gdm
any ideas?
he said he did that, it's something else...

Audio volume levels on MBP

Similar Messages

Maybe you are looking for