Audio wave form not showing up properly in Viewer (FCP 7 running Lion)

For some reason when I bring in my audio timeline into the Viewer to see the wave form it does not show up accurately. I used to be able to pull it up and fairly easily see each location we hit the clapper. Now the clapper spike does not show up until I zoom almost all the way in on the wave form. That's a TOTAL PAIN since you only see a few frames at a time. Not good when you've got a couple of hours of audio on that time line with 30 or 40 clapper locations to find. It's funny, it shows an actual flat spot until you ZOOM WAY IN on it, then you see the spike. This seemed to start happening shortly after installing Lion. I am not for sure that's what is happening, but has just never happened before.

Have you trashed your preferences?
If you use Preference Manager (free) from Digital Rebellion, you can save you current preferences before trashing so you can restore them if you wish.
http://www.digitalrebellion.com/prefman/
MtD

Similar Messages

Can I get the audio wave form to show in the Timeline?

Can I get the audio wave form to show in the Timeline?
Thanks / Christer

Yes Christer.
At the bottom left corner , under the audio timelines you will see a tiny black triangle.
Click it and from the contextual menu that appears select "Show Audio Waveforms".
Ian.

View audio wave form in A1 and A2 etc in the timeline instead of the Viewer

It's likely this is an amateur question buuut -
Is there anyway to get the audio wave form to show in the Audio layers in the timeline. The only way I've seen to adjust and play with audio is when I double click on one of the tracks and then the audio tab in the viewer will open. I want to be able to see waveform in the timeline and then add or remove markers and adjust from the timeline -
There's got to be some way to adjust audio and play and stop so that you can watch the video and hear audio changes as you tweak it at the same time.

SEQUENCE--> SHOW AUDIO WAVEFORMS

OS X - Audio Wave Form Disappears

OS X 10.10.2
Premiere v. 2014.2
In every project I start I notice that the audio wave form that displays in the timeline, after Premiere conforms the audio, disappears depending on where I have the scroll bar in the timeline. This only happens when I create a multicam clip with two or more cams. I can also pin-point when it happens. If I scroll to the end of the timeline that I placed the clip in as soon as the end of the clip enters the current timeline field of view the wave forms will disappear. I took a video to show exactly what happens.
I understand that I am going to have to submit a bug report, but I want to know if 1) anyone else is experiencing this or can reproduce it and 2) if there is a way to fix it. Right now the only workaround for me is to Render and Replace the audio for every multicam clip I make. When I do that the wave forms seems to display correctly, but I would rather not have to do that every time I use a multicam clip.
I figure if others experience this and we all submit a bug report the odds of it getting fixed will increase.

I'm going to bump this. Is anyone else even experiencing this or able to reproduce it?

Audio wave form in the viewer looks wrong

hello everyone
i taped a live jazz event and i had two xlr cables running from one camera to the board
i now digitized and i am opening this clip in the viewer but it doesnt look like a normal
audio wave. peaks are showing from top and bottom. Maybee because it is 2 channels
i am trying to find a sync reference in the audio waveform of the 3 camera angles i have,
But i dont know why i do not see a normal curve. In the viewer i have Mono (a1) and Mono(a2)
both are not giving me a regular waveform
any suggestions?
thanks
Danny

yes i think it is overmodulated
levels were not set correctly
the camera was close to the stage and to the speakers
so the audio levels were not set correctly
i think my only option is to sync the 3 angles visually
Danny

I dont have audio wave forms in timeline

I DONT SEE AUDIO WAVE FORMS IN TIMELINE , I CN HEAR DE SOUND

Right click on the track hight toggle (Bottom left) and select "show audio waveforms"
DM

Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List

Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List.But the Employee is active . Is there any setup for this activity?

Hi,
This is because the query is excluding the current site you are trying to modify since it is actually in the report.
You can include in your query:
or site_id = :Pxx_SITE_ID
Where Pxx_SITE_ID is the item holding the site_id value and xx is your page number.
Thank you,
Erick

Audio tracks don't show up properly on sequence when enlarging timeline

On the timeline, audio tracks don't show up properly, by either appearing out of sync or by repeating itself when I enlarge it to work on it. Other sequences in the project work fine, and I've tried coping a pasting this sequence or parts of it to a new one and I still have the problem. Attached below is an example of the problem. This sequence is about 40 minutes long. Thanks for any help. Lucian

Is it the same if you uncheck the rectified audio box?

Enrollment Print Form Not Showing up in ESS

Hi Experts,
I am having an issue with the Benefit's Enrollment form not showing up in the ESS for the Adjustment reasons. We are currently not using the Standard Open Enrollment event, I have created a new Adjust reason 'OPN' for 'OPEN'. Shown below is my launchpad Configuration. Please throw some light on what i missed in my config.
Note: all other functions are working fine for the Adjustment reason Including Confirmation statement.
Adjustment Reason:
LPD_CUST:
Thanks,
Vishnu

It's repeated post. did you check this http://scn.sap.com/thread/3727472

ScrollBars not showing up properly

I am displaying a JTree in a JScrollPane with default settings ie. both horizontal and vertical scroll bars will show up when the contents can not fit in to the scroll pane.In this case when i expand the tree nodes the scroll bars are not showing up properly.It looks like the foreground is not painted properly.The background color is white here.We are using custom look and feel, not the standard one. Any idea why it is so?
Thanx in advance
Ashok

This is the MetalTheme i am using.
public class SSBCMetalTheme extends javax.swing.plaf.metal.MetalTheme
//     private final ColorUIResource primary1 = new ColorUIResource(102,102,153);
     private final ColorUIResource primary1 = new ColorUIResource(0,0,0);
//     private final ColorUIResource primary2 = new ColorUIResource(153,153,204);
     private final ColorUIResource primary2 = new ColorUIResource(153,153,153);
//     private final ColorUIResource primary3 = new ColorUIResource(204,204,255);
     private final ColorUIResource primary3 = new ColorUIResource(204,204,204);
private final ColorUIResource windowBackground = new ColorUIResource(Color.white);
private final ColorUIResource textHighlight = new ColorUIResource(Color.blue);
     private final ColorUIResource secondary1 = new ColorUIResource(102,102,102);
     private final ColorUIResource secondary2 = new ColorUIResource(153,153,153);
     private final ColorUIResource secondary3 = new ColorUIResource(204,204,204);
//     private FontUIResource controlFont = new FontUIResource("Dialog",Font.BOLD,12);
     private FontUIResource controlFont = new FontUIResource("Dialog",Font.BOLD,11);
//     private FontUIResource systemFont = new FontUIResource("Dialog",Font.PLAIN,12);
     private FontUIResource systemFont = new FontUIResource("Dialog",Font.PLAIN,11);
//     private FontUIResource userFont = new FontUIResource("Dialog",Font.PLAIN,12);
     private FontUIResource userFont = new FontUIResource("Dialog",Font.PLAIN,11);
     private FontUIResource smallFont = new FontUIResource("Dialog",Font.PLAIN,10);
     public String getName() { return "SSBC"; }
     protected ColorUIResource getPrimary1() { return primary1; }
     protected ColorUIResource getPrimary2() { return primary2; }
     protected ColorUIResource getPrimary3() { return primary3; }
     protected ColorUIResource getSecondary1() { return secondary1; }
     protected ColorUIResource getSecondary2() { return secondary2; }
     protected ColorUIResource getSecondary3() { return secondary3; }
     //public ColorUIResource getWindowBackground() { return (primary3); };
     public ColorUIResource getWindowBackground() { return windowBackground; };
     public ColorUIResource getDesktopColor() { return (primary3); };
     public ColorUIResource getTextHighlightColor(){ return primary3;}
//public ColorUIResource getControlDisabled(){ return primary3;}
//public ColorUIResource getControlHighlight(){ return windowBackground;}
     public FontUIResource getControlTextFont() { return controlFont;}
     public FontUIResource getSystemTextFont() { return systemFont;}
     public FontUIResource getUserTextFont() { return userFont;}
     public FontUIResource getMenuTextFont() { return controlFont;}
     public FontUIResource getWindowTitleFont() { return controlFont;}
     public FontUIResource getSubTextFont() { return smallFont;}
I can't use windows look and feel as i am using the above look and feel.Any idea what is the problem?
Thanx
Ashok

Employee Statement of Earnings form not showing anything..

Employee Statement of Earnings form not showing anything..eventhough the process was completed successfully. No data even if i access through assignment form..
What could be the problem?

1. What legislation?
2. Did you perform any patching prior to running the process?
3. Does the following apply to your situation? Note 335950.1 - Best Practices: Generate Run Balance
Regards,
Greg

Making Audio wave forms larger in FCP

Hiya,
I was just wondering if anyone knows a way of making audio wave forms in the timeline in larger or smaller? (without adjusting the size of the audio track itself).
Like you can in Avid by hitting ctrl-L / ctrl-k
I'm editing with some soft audio, where it would be helpful to be able to see the waveforms a bit more closely. I was told modify/audio/normalise might adjust the waveform inside the audio track, but it doesn't seem to...
Cheers and thanks
L

AH....that must be a feature of the newer MC and Adrenaline software, which I have little experience with. All these new features and nothing to say "hey, this is a GREAT new feature." And fellow editors don't let you know unless you ask "hey, how did you get your timeline to look like that?"
This is why I like the FCP community. As soon as we find something, we shout out "HEY, LOOK AT THIS COOL THING!"
Even FCP goes "Hey, look at this cool thing!" Avid? New features, and they are quiet about it. Avid doesn't tell people about new stuff.
Shane

HT201272 My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem?

My audio books are not showing up in purchase history, but everything else is okay... is anyone having the same problem? I have already authorised my new computer and I am currently downloading my purchased music and videos however the books (audiobooks) are not showing for download.
Hope someone can help!

"My audio books are not showing up in purchase history,"
That is correct. You cannot redownload audiobooks.
" is anyone having the same problem?"
Everyone and it is not a problem. Audiobooks simply are not available for redownload.

Old All-Day events not showing in Calendar List View

Reviewing events in my Calendar on the iPhone and have noticed that All Day Events that are older than one year do not show in the "List" view
For example, I have all my holidays in a calendar called "Vacation". Month and Day view list holidays from earlier than today (09 Sept 2008) properly, however list view shows nothing. Timed events (e.g. day trips) in the same calendar show.
Similarly no Birthdays appear in the past. I can see a case for Birthdays being omitted in the past, but not other events (e.g. wanting to know exactly when you went to that all day wedding last summer)

I have this same exact problem. For me, past events that have a specific time associated with them show up in List view; however, past events that are all day events only show in List view once in a blue moon only. Apple support has been absolutely clueless about this issue. They just tell me it's weird and they have no explanation. It's unbelievably annoying though.

Why some times jdeveloper does not show a coreect design view ?

Hi
thank you for reading my post
why jdeveloper does not show a correct design view of jsf pages sometimes?
It does not shows labels and ... , just show tag names like : form , ... ?
here is a picture for this :
1-incorrect page:
http://www.flickr.com/photos/59086726@N00/217556594/
2-correct page :
http://www.flickr.com/photos/59086726@N00/217556595/
I just closed and open the IDE and page designer shows incorrect pages
thanks

Also try this...go to the project properties for the View project. Look at the JSF Libraries and remove the two JSF libraries and then re-add them....this sometimes helps.
Regards
Grant Ronald

Audio wave form not showing up properly in Viewer (FCP 7 running Lion)

Similar Messages

Maybe you are looking for