Audio waveform does not appear graphically.

Line is straight. Size of Audiotrack doesn´t matter. 
Recording with Blue USB-Mic, Logic X, Mavericks and a Mac Book Pro.
(In Logic Express 8 it gives something like create audio overview, but I dont find it in LP X.)
What setting have I missed?

Hi,
Tobimusic wrote:
Well, I found the command but it was not applyable. Text is dimmed. Tried Update File Information but that made no difference.
The file (not the region) needs to be selected for the option to be appliable.
Tobimusic wrote:
The graphic is well shown in the imported files but not in the newly recorded file.
Yes, because the recording delay preference applies to recorded audio only.
Tobimusic wrote:
I´ll try the recording tip later today and come back on that. Perhaps that also fixes the tendency of delay in recording. (Forgot to write that earlier. )
Yes, it will fix both problems.
J.

Similar Messages

  • Audio Waveform does not appear

    I'm having trouble with getting the audio waveform to show up in the project window.  I want to fade out music, but the option is not available because my audio clips do not have a waveform, only a solid green line (see pic below) --no matter what type of audio I put in.  Selecting the 'Show / Hide Waveforms' Option does not make a difference in the project window; it shows the waveform in the event window only.  Any ideas would be great!

    Hi,
    Tobimusic wrote:
    Well, I found the command but it was not applyable. Text is dimmed. Tried Update File Information but that made no difference.
    The file (not the region) needs to be selected for the option to be appliable.
    Tobimusic wrote:
    The graphic is well shown in the imported files but not in the newly recorded file.
    Yes, because the recording delay preference applies to recorded audio only.
    Tobimusic wrote:
    I´ll try the recording tip later today and come back on that. Perhaps that also fixes the tendency of delay in recording. (Forgot to write that earlier. )
    Yes, it will fix both problems.
    J.

  • Audio waveform does not draw

    Since upgrading to CC 2014 we have been experiencing a few issues. One such issue is audio waveforms not drawing. We have this issue on 5 different machines.
    When opening a project the audio waveforms of 1 or more clips does not draw. This seems to be random. An example: I finish editing for the day. Save the project. Shut down the mac. Come in the next day, turn on Mac, launch PP, open project. At this point some audio waveforms may draw, some may not.
    I've done a bit of exploration and it seems that PP is having trouble reading the .pek files. If I shut down and delete the .pek files and then relaunch – PP regenerates the .pek files and the audio waveform draws again.
    Anyone else having this issue?

    I don't know if it is related but I know there is an issue with CC 2014 resetting the preview file location to default on some projects.

  • Hp 2133 mini audio device does not appear

    I've got a hp 2133 mini,audio doesnt appear on windows xp but its working on ubuntu?can you give me some advice what to do?thanks

    Heureka! since iTunes update 12.0.1 everything is working flawlessly

  • Audio track does not appear using Automate To Sequence

    When I use the Automate to Sequence feature after arranging clips in a Bin, none of the associated audio files show up in Audio 1 but the video clips do show up in Video 1. When I do this on other computers it works fine. (This is a classroom setting.)

    Start reading on mono and stereo tracks and project setup.

  • Image does not appear when publishing...does it matter where you import audio?

    I have an image on my slide and when I preview the slide it appears correctly, when I hit F10 to preview next 5 sldies or publish file it does not appear. I have imported audio to the slide not to an object. I am wondering if this matters? Any help on this would be greatly appreciated.
    Thank you...

    Rod -
    Cant really explain this one, but the visible check box was checked... I then unchecked it and checked it again, now it seems to be working.....
    Weird, but at least it is working.

  • The graphic HTML signature panel does not appear in my Mac mail

    The graphic HTML signature panel does not appear in my Mac mail. I have inserted the signature after reading on the forum. But the images do not download - the rest of the text in the signature is in place - just the logo and the baseline which is a graphic file does not download.  Please help.

    Hi, are the pics at a remote location, or on your Mac?
    Have you tried drag & dropping the graphics on the signature window?

  • Downloaded audio book on my iphone does not appear in itunes library and i cannot update iOS without transfering it to library

    Downloaded audio book to my iphone does not appear in my itunes library and i cannot update iOS without transfering it to library

    You should be able to copy it over to your computer's iTunes via File > Devices > Transfer Purchases.
    Audiobooks are a one-time only download from the store, so you may want to take a backup copy of it when you've copied it over to your computer

  • Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

    Hi guys,
    I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
    I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
    lets start from the low level troubleshooting done:
    - plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
    - booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
    In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
    I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
    what I've ruled out:
    -HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
    -BIOS has zero options for graphics card options.
    Any ideas before i RMA this laptop? I'm at a loss. 

    OP's problem has been solved.  Also please don't resurrect and do not hijack other people's topics. Open your own one.
    >>Please read and comply with the Forum Rules.<<
    Topic Locked

  • BSP iview HAP_CALIBRATION Graphic does not appear

    Hi there,
    I'm using HAP_CALIBRATION BSP application, search.htm page. When trying to show the graphic, it does not appear.
    I have configured IGS connections at SM59. I´ve already checked note 898918 and I have this correction installed.
    What can I do more? Can you send me some documentation? I haven't find nothing special.
    Thanks and best regards,
    Vasco Brandã

    Solved.
    It is necessary to create IGS_RFC_DEST_MBO RFC connection.
    Best regards,
    Vasco Brandã

  • Audio Mixer Window Does Not Appear

    I have been using Premiere Elements for years in various versions (current project in V8, just downloaded V9 trial. Tonight I went to use the Audio Mixer function and found that when I click on Audio Mixer in the dropdown menu it does not appear. I then downloaded the V9 trial and have the same issue.
    Its hard to believe that I have not tried to do audio mixer functions in V8. But the last time I used the audio mixer in Premiere Elements it was accessed with a small button and worked find. Perhaps that was version 7. I have no memory of when I upgraded from 7 to 8.
    Help! Why will the audio mixer window not appear?

    I tried to access the Mixer from both the drop down menu below the right side panel and top of the interface on 8.0. Then I loaded 9.0. Same test same result first time around.
    Then I read your note and tried both places again and the top of the interface worked in 9.0!  Now both locations work in both versions. Weird.
    Thanks very much for the response.

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • HDMI does not appear in playback

    I have no audio when I connect my HP Pavilion dv4-1435dx Entertainment Notebook PC to my Panasonic TV via a HDMI cord.  The picture is great, but audio will only go through my laptop speakers.  I have updated all of my devices, I have tried using Intel's website to verify I have all of my drivers updated.  I have also checked on my playback to show all disabled devices and HDMI does not appear.  I have uninstalled and reinstalled to no avail.  I have even verified that the settings on my TV are set to digital audio.  I have tried uninstalling the Intel High Definition Audio HDMI, plugged the HDMI cable to my laptop with the TV off, reboot and still no luck!!  The only options I have for playback are "Speakers and Dual Headphones", "Independent dual headphones", and "SPDIF"  My computer is an upgrade from Vista to Windows 7 64-bit.  I am getting way too frustrated over this and have searched every forum imaginable for a resolution to this issue, please help!!

    Hi,
    Try this to see if it helps.  Download the Chipset driver and Graphics driver on the links below and save the installers to your Desktop.
    Chipset Driver
    Intel Graphics Driver
    Next, in Device Manager, open Display Adapters, right click on the Intel graphics chip and select Properties.  Click the Driver tab and then select uninstall.  When done, do the same for the for the Intel High Definition Audio CODEC and the IDT High Definition Audio CODEC, found under Sound Video and Game Controllers.
    Now return to the Desktop and install the Chipset driver and then the Graphics driver.  When complete, reboot the notebook and see if this has helped.  Check in Device Manager that both the Intel Graphics and the Intel Hi Definition Audio codec have reinstalled successfully and whether you now see the HDMI Audio option under playback devices ( found in Control Panel, Sound ).
    If it shows up correctly, try the HDMI connection and see if it now functions properly.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Image does not appear in applet.

    I am reading the book, Teach Yourself Java in 21 Days.
    There is an example in Ch.11 that shows how to load an image into the applet.
    I have tried to use the code provided as is along with an image as defined in the code. I have also uploaded the html, class and image to a folder on the web. Unfortunately, the image does not appear in the applet. The image does have an image that I created using ms paint.
    Here is the code I am currently using from the book:
    import java.awt.Graphics;
    import java.awt.Image;
    public class LadyBug2 extends java.applet.Applet {
         Image bugimg;
         public void init() {
             bugimg = getImage(getCodeBase(),
                 "ladybug.gif");
         public void paint(Graphics g) {
             int iwidth = bugimg.getWidth(this);
             int iheight = bugimg.getHeight(this);
             int xpos = 10;
             // 25 %
            g.drawImage(bugimg, xpos, 10,
                iwidth / 4, iheight / 4, this);
             // 50 %
             xpos += (iwidth / 4) + 10;
             g.drawImage(bugimg, xpos , 10,
                  iwidth / 2, iheight / 2, this);
             // 100%
             xpos += (iwidth / 2) + 10;
             g.drawImage(bugimg, xpos, 10, this);
             // 150% x, 25% y
             g.drawImage(bugimg, 10, iheight + 30,
                 (int)(iwidth * 1.5), iheight / 4, this);
    }I tried placing the image in an images folder and I also tried changing the code to getImage(getDocumentBase(), "ladybug.gif")
    as well as tried getImage(getCodeBase(), "ladybug.gif") in order to try and grab the image from the same directory as the class file and the html file.
    The image file's name is: ladybug.gif
    The code in the html file:
    <HTML>
    <HEAD>
    <TITLE>Lady Bug</TITLE>
    </HEAD>
    <BODY>
    <P>
    <APPLET CODE="LadyBug2.class" WIDTH=1024 HEIGHT=500>
    </APPLET>
    </BODY>
    </HTML>
    I have gotten previous applet examples from the book to work. One of them did have an error in the author's code which I fortunately was able to overcome. This time, I am afraid, the error eludes me.
    Thanks in advance.
    I do see that there is no start/stop/run in this version, but I believe this should still work because of the init. I am guessing that maybe the problem lies somewhere in there.
    Message was edited by:
    gnikollaj

    According to the javadoc:
    getImage
    public Image getImage(URL url,
    String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
    This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
    Parameters:
    url - an absolute URL giving the base location of the image.
    name - the location of the image, relative to the url argument.
    Returns:
    the image at the specified URL.
    I am confused as to how to use the name after the url.
    Should it read something like:
    bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
    EDIT: I still get the same error, cannot find symbol at getImage.
    Message was edited by:
    gnikollaj

  • This file does not appear to be a photoshop file error.

    Hello,
    I know this has been covered a few times already, but none of the previous threads about it were able to help my situation.
    Ok so here is what i did:
    Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and changed the image size from 1920x1080 to 720x480. Then saved as a JPEG, didn't tick any boxes, just used default save as settings.
    I then brought those images into my Encore DVD Project, added them to the library, then placed one into a already made menu, and "sent to back".. so it became the new background. I did this with two menu's today. Note i have actually done this same exact process many times without problem. I then tried to build a dvd image of the project, and i got the "this file does not appear to be a photoshop file". Now it won't even let me open those menu's (plus another one, which i made a long time ago, and have even successfully built DVD's with), to edit them. I tried removing all the new JPEGS i added today, from the library, but still i get the same message.
    The menu's that i now can't open, took a very long time to make, and i need to have this DVD completed ASAP.. as it is being released world wide in a couple of weeks and i need to get it replicated. So i don't actually have time to remake these menu's. So if anyone can help me, that would be much appreciated, as i have studio exec's cracking down on me.
    Thanks in advance :-)

    Now, if one Imports the JPEG with its extension changed to PSD as a Menu, then the Menu is created, including the necessary Layers. The Menu is NOW a PSD, and when Opened in PS will reflect the Layer structure (try this at home). If one had constructed Buttons in the JPEG, they would now only be graphics on that one single Background Layer in the JPEG. They would not function as Buttons, but could be useful graphics for other things. One would then need to add real Button Layer Sets to the PSD to be able to add any navigation.
    Back in the post above, I suggested doing the Save_As to JPEG to see how things get changed. Use that in another test - Import that JPEG as a Menu. In Encore, try to Link to what had originally been Buttons in that Imported JPEG. What happens? Can you Link to them, even though you are now working with the created PSD?
    Now, add a Button, or two, from the Library. Choose Edit in Photoshop, and look at the Layer and Layer Set structure. Things have changed from the original JPEG, with only the Background Layer. You now have that Library Button's Layer Set structure.
    Good luck, and hope that this helps,
    Hunt
    Here are looks at the structure, using the Library Menu Business>Clock:
    The Menu in PSD with the Layers Palette Open
    Same Image With Layers Flattened to Save As a JPEG
    What the JPEG Looks Like As a Flattened JPEG
    The only way to Import that JPEG into Encore as a Menu would be to change the file extension to PSD, but what appear to be Buttons would NOT be Buttons, but just static pixels in the Background.
    Message was edited by: Bill Hunt - Added graphics

Maybe you are looking for