Audio Waveform does not appear

I'm having trouble with getting the audio waveform to show up in the project window.  I want to fade out music, but the option is not available because my audio clips do not have a waveform, only a solid green line (see pic below) --no matter what type of audio I put in.  Selecting the 'Show / Hide Waveforms' Option does not make a difference in the project window; it shows the waveform in the event window only.  Any ideas would be great!

Hi,
Tobimusic wrote:
Well, I found the command but it was not applyable. Text is dimmed. Tried Update File Information but that made no difference.
The file (not the region) needs to be selected for the option to be appliable.
Tobimusic wrote:
The graphic is well shown in the imported files but not in the newly recorded file.
Yes, because the recording delay preference applies to recorded audio only.
Tobimusic wrote:
I´ll try the recording tip later today and come back on that. Perhaps that also fixes the tendency of delay in recording. (Forgot to write that earlier. )
Yes, it will fix both problems.
J.

Similar Messages

  • Audio waveform does not appear graphically.

    Line is straight. Size of Audiotrack doesn´t matter. 
    Recording with Blue USB-Mic, Logic X, Mavericks and a Mac Book Pro.
    (In Logic Express 8 it gives something like create audio overview, but I dont find it in LP X.)
    What setting have I missed?

    Hi,
    Tobimusic wrote:
    Well, I found the command but it was not applyable. Text is dimmed. Tried Update File Information but that made no difference.
    The file (not the region) needs to be selected for the option to be appliable.
    Tobimusic wrote:
    The graphic is well shown in the imported files but not in the newly recorded file.
    Yes, because the recording delay preference applies to recorded audio only.
    Tobimusic wrote:
    I´ll try the recording tip later today and come back on that. Perhaps that also fixes the tendency of delay in recording. (Forgot to write that earlier. )
    Yes, it will fix both problems.
    J.

  • Audio waveform does not draw

    Since upgrading to CC 2014 we have been experiencing a few issues. One such issue is audio waveforms not drawing. We have this issue on 5 different machines.
    When opening a project the audio waveforms of 1 or more clips does not draw. This seems to be random. An example: I finish editing for the day. Save the project. Shut down the mac. Come in the next day, turn on Mac, launch PP, open project. At this point some audio waveforms may draw, some may not.
    I've done a bit of exploration and it seems that PP is having trouble reading the .pek files. If I shut down and delete the .pek files and then relaunch – PP regenerates the .pek files and the audio waveform draws again.
    Anyone else having this issue?

    I don't know if it is related but I know there is an issue with CC 2014 resetting the preview file location to default on some projects.

  • Hp 2133 mini audio device does not appear

    I've got a hp 2133 mini,audio doesnt appear on windows xp but its working on ubuntu?can you give me some advice what to do?thanks

    Heureka! since iTunes update 12.0.1 everything is working flawlessly

  • Audio track does not appear using Automate To Sequence

    When I use the Automate to Sequence feature after arranging clips in a Bin, none of the associated audio files show up in Audio 1 but the video clips do show up in Video 1. When I do this on other computers it works fine. (This is a classroom setting.)

    Start reading on mono and stereo tracks and project setup.

  • Image does not appear when publishing...does it matter where you import audio?

    I have an image on my slide and when I preview the slide it appears correctly, when I hit F10 to preview next 5 sldies or publish file it does not appear. I have imported audio to the slide not to an object. I am wondering if this matters? Any help on this would be greatly appreciated.
    Thank you...

    Rod -
    Cant really explain this one, but the visible check box was checked... I then unchecked it and checked it again, now it seems to be working.....
    Weird, but at least it is working.

  • Downloaded audio book on my iphone does not appear in itunes library and i cannot update iOS without transfering it to library

    Downloaded audio book to my iphone does not appear in my itunes library and i cannot update iOS without transfering it to library

    You should be able to copy it over to your computer's iTunes via File > Devices > Transfer Purchases.
    Audiobooks are a one-time only download from the store, so you may want to take a backup copy of it when you've copied it over to your computer

  • Audio Mixer Window Does Not Appear

    I have been using Premiere Elements for years in various versions (current project in V8, just downloaded V9 trial. Tonight I went to use the Audio Mixer function and found that when I click on Audio Mixer in the dropdown menu it does not appear. I then downloaded the V9 trial and have the same issue.
    Its hard to believe that I have not tried to do audio mixer functions in V8. But the last time I used the audio mixer in Premiere Elements it was accessed with a small button and worked find. Perhaps that was version 7. I have no memory of when I upgraded from 7 to 8.
    Help! Why will the audio mixer window not appear?

    I tried to access the Mixer from both the drop down menu below the right side panel and top of the interface on 8.0. Then I loaded 9.0. Same test same result first time around.
    Then I read your note and tried both places again and the top of the interface worked in 9.0!  Now both locations work in both versions. Weird.
    Thanks very much for the response.

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • Multicam source sequence - audio offset does not work when syncing via audio

    Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
    Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
    Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
    Unlesss I'm missing something?

    I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

  • Steady green light on A1084. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it.  Is there a fix?

    Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier.  Is there a fix?

    I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp.  The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express.  It would be nice to play Airtunes while simultaneously accessing the Internet.  I don't understand your question about what program I am using for which I require AirPlay.  I am not learned about computers in general, and even less so about Macs than PCs.  I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier.  I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo.  I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

  • Logitech camera does not appear in sound control panel

    I have a Logitech webcam. Both audio and sound worked well until yesterday. Now the audio does not work (Video is fine) ando does not appear in sound control panel. I've tried the webcam in other mac and works fine.
    I'm running Lion 10.7.5 on a Mac Pro mid 2007.
    Any idea?
    TIA
    Antonio

    HI,
    Restart the Mac.
    If that does not work  I would also try a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    8:36 PM      Wednesday; November 28, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • When I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

    when I try to use bluetooth speakers, the option to switch to bluetooth speakers does not appear in ipod mode

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
    - Open the Voice Memos app and see if you see movement on the VU meter needle or changes in the moving waveform graph with changes in noise level trying to be recorded.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • HDMI does not appear in playback

    I have no audio when I connect my HP Pavilion dv4-1435dx Entertainment Notebook PC to my Panasonic TV via a HDMI cord.  The picture is great, but audio will only go through my laptop speakers.  I have updated all of my devices, I have tried using Intel's website to verify I have all of my drivers updated.  I have also checked on my playback to show all disabled devices and HDMI does not appear.  I have uninstalled and reinstalled to no avail.  I have even verified that the settings on my TV are set to digital audio.  I have tried uninstalling the Intel High Definition Audio HDMI, plugged the HDMI cable to my laptop with the TV off, reboot and still no luck!!  The only options I have for playback are "Speakers and Dual Headphones", "Independent dual headphones", and "SPDIF"  My computer is an upgrade from Vista to Windows 7 64-bit.  I am getting way too frustrated over this and have searched every forum imaginable for a resolution to this issue, please help!!

    Hi,
    Try this to see if it helps.  Download the Chipset driver and Graphics driver on the links below and save the installers to your Desktop.
    Chipset Driver
    Intel Graphics Driver
    Next, in Device Manager, open Display Adapters, right click on the Intel graphics chip and select Properties.  Click the Driver tab and then select uninstall.  When done, do the same for the for the Intel High Definition Audio CODEC and the IDT High Definition Audio CODEC, found under Sound Video and Game Controllers.
    Now return to the Desktop and install the Chipset driver and then the Graphics driver.  When complete, reboot the notebook and see if this has helped.  Check in Device Manager that both the Intel Graphics and the Intel Hi Definition Audio codec have reinstalled successfully and whether you now see the HDMI Audio option under playback devices ( found in Control Panel, Sound ).
    If it shows up correctly, try the HDMI connection and see if it now functions properly.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My I-Pod Touch contains an audible book, which I can not remove.  It does not appear in I-Tunes, and this takes up so much memory that I can't sync my i-Pod.

    My I-Pod Touch contains an audible book, which I can not remove.  It does not appear in I-Tunes when I try to sync, and this audio book takes up so much memory that I can't sync my i-Pod.
    How can I remove this from my i-pod?
    Thanks

    Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
    http://support.apple.com/kb/TS1567
    More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

Maybe you are looking for

  • Logical to Physical objects Mapping

    Recently installed OLAPTRAIN's SALESTRACK AW, and noticed that there are many __AW_GENERATED.. object names. It is very difficult trying to trace back what these objects refer to, and quite challenging if we are using OLAP DML commands to create cust

  • Security Setting in Microsoft Excel Prohbit XL Report From Running

    Dear Expert, When I run XL Report following  error message display Security Setting in Microsoft Excel Prohbit XL Report From Running On  server Excel 2003 is installed and its working , But  client  PC Excel 2007 is installed and when run xl addon a

  • Why is the flash player install not making good audio?

    I am trying to run a "movie" from Autodesk's tutorial stuff, and it requires a Flash player, which I downloaded and installed. The "movie" plays but not with good audio...(almost no volume) I am running win 7 64... went through that install of "Squar

  • The requested resource (/hello) is not available

    Hi, I keep getting the message: http status 404 The requested resource (/hello) is not available when i'm trying to access http://localhost:8080/hello i've created the war file using the deployment tool you get downloading J2EE 1.4. I've also tried t

  • Discover other oracle server

    is there an api/oci function to discover other oracle servers on a LAN? pretty much i want to provide a list of oracle servers a user can connected to.