Audio Waveform Missing (or partial) in Timeline

Here's an odd problem.
For one of the projects I'm working on the waveform for the audio tracks is missing. When I hit CommandOptionw to turn it on and off, when on there are only the x's you see as it's being built.
On one of the tracks, not both even though they are in stereo, there is a piece of the waveform.
I trashed all the waveform caches I can find (although I may have missed some, they set things up haphazardly) the waveform is never built.
Any ideas? Thanks!
10.4.10
FCP 6.0.1
Intel

I would hazard a quess that you've pushed fcp system resources to the max. I've been working on syncing up some badly time-coded multicam shoots, using the waveforms to sync them up. On one pair of clips, 1.5 hours each, it took quite a while to draw the waveforms and then fcp was VERY sluggish until I turned them off. That's with 6 gigs of ram on a pretty speedy machine.

Similar Messages

Audio waveform refreshes display slowly on timeline (PrPro CS6)

Is it just me.
I LOVE so many things about this new release. The one persistent, "always dealing with" issue I have is I have to wait for the audio waveform to refresh most times when I zoom in and out or even just scroll back and forth on the timeline. This is a huge slowdown/impediment issue for me.
1. This never happened in previous versions
2. This is not during indexing ... it's all the time
3. It happens even when no effects are applied
4. No, I do not have a slow workstation (CPU, mem, drives all optimal) ... remember, this never happend in previous versions
5. I have preview files/cache and project/source video on different hard drives
Anyone else experiencing this?

Harm Millaard wrote:
Since all their posts at the CreativeCow are completely lacking any useful information, it seems that OE (Operator Error) is the common denominator. OE in terms of using outdated drivers, lacking hardware, incorrect setup, background processes, improper configuration, and name all the other OE's one can think of.
There are many issues which are in CS6 and they are not Operator Error. My computer exceeds the minimum requirements of Premiere Pro and still have the same issue. On the other hand I have reinstalled several times but can't get Encore DVD menus, and also the title templates is buggy because I can't access the wedding templates. Supporting the application will not yield any further development to correct these issues. The bottom line was that CS6 was a rushed release since Adobe are giving themselves less time to develop the next version as compared to what they used to do. In less than 9 months they will be releasing 6.5 with fixes to all these issues and we will be forced to pay for the upgrade again becuase there will be no support for 6?? I think Harm get the upgrade for free so that you can continue to support Adobe, even if the software is messed up you will simply turn a blind eye. You should test this on an average system most users use not on your monster!!

Audio Waveforms missing?

I clicked on "View Audio Waveforms" under "View" as I'm editing my movie.
I assumed that the waveforms would appear in the audio tracks. But as I started the clip, nothing at all appeared.
Can someone tell me what I'm doing wrong? Thanks.

Showing audio waveforms
http://docs.info.apple.com/article.html?path=iMovie/6.0/en/imv1133.html
Note: Waveforms are faint when you're showing clip volume levels. To hide clip volume levels, deselect Show Clip Volume Levels in the View menu. (A selected item has a checkmark next to it; choose the item again to deselect it.)
To see more detail in the waveform, it's a good idea to zoom in on the timeline viewer.
Sue

I can't see the Audio Waveforms in the timeline. No triangle button to click. Just switched from FCP. Help!?

I can't see the Audio Waveforms in the timeline. No triangle button to click. Just switched from FCP. Help!

When I click on the wrench or right click to customize the box, these are the options I'm given. I don't see waveform. I've edited in Adobe Audition for years, and see the waveform panels in all the Premiere Pro tutorials, am I missing something? (besides a brain?)

Display Audio Waveforms in Timeline, Premiere Pro CC

I have just started using Premiere Pro CC, watched all the turorials, and started a project. I am wondering how to display audio as waveforms in the timeline. I have tried suggestions like checking and unchecking rectify audio waveforms, but have not been able to get actual waveforms in the main timeline. It seems like there used to be disclosure triangles in a previous version, but there are none in this version.

After 35 minutes with Adobe phone support ... this is what we found and resolved the issues (as both A1 and A2 had no sound wave):
(1) When media files are moved, PR does not know where to find them. We had to extensively search project files (Lynda.com tutorial) to locate some missing files.
This resolved A1.
(2) For A2, we right-clicked on the audio track and selected "Render and Replace" ... that resolved the 2nd issue.
Another word of caution ... there is a significant privacy bug at the moment. Even though my forum profile was set to only display my screen name (and only show my account name to myself), the my account name was appearing in this forum. I had to change my personal name on the account in 2 places and then reboot my browser. That fixed the privacy issue to the extent that a bogus personal name is now showing - and my screen name is still missing

Showing audio waveforms in Timeline?

I am trying to access show audio waveforms in the timeline, so I can edit to music. I am checking the option in the user preferences, but it is not showing up on my audio. Am I missing something?
Doug

Or click the right pointing arrow (marked red) and choose Show Waveforms from the popup menu.

Missing audio waveforms in GarageBand 10.0.1

My GarageBand 10.0.1 does not create audio waveforms when I record. I can record and play back my voice, but I don't see any audio waveforms when I record or playback. I must be missing some really elemental step, but for the life of me I can't figure out what it is. I am trying to record my voice to create a podcast. I know the podcast template is no longer available, but I should be able to use "empty project" for this, correct?

Phill85 wrote:
It really doesn't give the same effect it used to "when called automatic tuning"??
there are lots of changes in v10. if you want the same effects you had in v6, keep using it, installing v10 doesn't delete v6

How do I see the audio waveforms in the timeline

How do I see the audio waveforms in the timeline
G5 Mac OS X (10.4.6)

In Sequence Setting (cmd-0) set the "Show Audio waveforms" in the Timeline Options tab.

Premiere Pro CC Crashing when Scrolling Through Sequence in Timeline - Audio Waveform Goes Blank First

The description is in the title: Premiere Pro CC Crashing when Scrolling Through Sequence in Timeline - Audio Waveform Goes Blank First.
Just started today, won't stop crashing now after a minute or two, and always does it when I scroll through the timeline of a sequence. The audio waveform goes blank first.
What is going on?
Date/Time:
2014-10-22 12:16:16.078 -0400
OS Version:
Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: E1BCDCD7-6284-3012-9151-FF85491060DA
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000011d74b000
VM Regions Near 0x11d74b000:
VM_ALLOCATE
000000011d748000-000000011d74b000 [   12K] rw-/rwx SM=PRV
--> STACK GUARD
000000011d74b000-000000011d74c000 [
4K] ---/rwx SM=NUL stack guard for thread 4
Stack
000000011d74c000-000000011d7ce000 [ 520K] rw-/rwx SM=COW thread 4
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread

same problem of mine, as posted here:
Crash when scrolling the timeline
please find attached the crash report log, as requested.
Process:         Adobe Premiere Pro CC 2014 [3770]
Path:            /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier:      com.adobe.AdobePremierePro
Version:         8.2.0 (8.2.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [225]
Responsible:     Adobe Premiere Pro CC 2014 [3770]
User ID:         501
Date/Time:       2014-12-22 16:33:25.725 +0100
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: DC744912-A135-A02B-C2D3-75C4CA421CDD
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000011a46a000
VM Regions Near 0x11a46a000:
    VM_ALLOCATE            000000011a461000-000000011a46a000 [   36K] rw-/rwx SM=PRV
-->
    VM_ALLOCATE            000000011a46d000-000000011a46e000 [    4K] rw-/rwx SM=PRV
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000011a46a000
VM Regions Near 0x11a46a000:
VM_ALLOCATE 000000011a461000-000000011a46a000 [   36K] rw-/rwx SM=PRV
-->
VM_ALLOCATE 000000011a46d000-000000011a46e000 [    4K] rw-/rwx SM=PRV
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.adobe.HandlerTimeline.framework 0x000000010c2b31f4 HandlerTimeline::TimelineMediaIconManager::DrawAudioWaveform(UIF::DC&, ASL::ParamRect<int> const&, ASL::ParamColor<RGBColor>, unsigned int, unsigned int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>, bool, std::vector<bool, std::allocator<bool> > const&) + 1620
1   com.adobe.HandlerTimeline.framework 0x000000010c1dc4f5 HandlerTimeline::AudioTrackContentView::DrawWaveform(UIF::DC&, ASL::ParamRect<int> const&, ASL::ParamRect<int> const&, ASL::InterfaceRef<BE::ITrackItem, BE::ITrackItem>, unsigned int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>) + 2661
2   com.adobe.HandlerTimeline.framework 0x000000010c1dafb3 HandlerTimeline::AudioTrackContentView::DrawTrackItemWaveform(ASL::InterfaceRef<BE::ITrac kItem, BE::ITrackItem>, dvamediatypes::TickTime const&, int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>) + 2131
3   com.adobe.HandlerTimeline.framework 0x000000010c2b447d HandlerTimeline::TimelineMediaIconManager::HandleWaveformNotification(int) + 429
4   com.adobe.HandlerTimeline.framework 0x000000010c2b53b0 HandlerTimeline::AsyncRequestNotifier::ListenToMessage(ASL::Message const&) + 176
5   com.adobe.ASLMessaging.framework 0x0000000100e1fb97 ASL::Broadcaster::BroadcastMessageInner(ASL::Broadcaster::ListenerRecord const&, ASL::Message const&) + 39
6   com.adobe.Frontend.framework   0x000000010006b039 FE::ApplicationErrorManager::ExecuteFunctionWithTopLevelExceptionHandler(boost::function0 <int>) + 41
7   com.adobe.ASLMessaging.framework 0x0000000100e1f71f ASL::Broadcaster::BroadcastMessage(ASL::Message const&) + 1695
8   com.adobe.ASLMessaging.framework 0x0000000100e25e9a ASL::StationUtils::BroadcastMessage(dvacore::utility::ImmutableString const&, ASL::Message const&) + 42
9   com.adobe.dvacore.framework   0x00000001003c763c boost::function0<void>::operator()() const + 28
10 com.adobe.dvacore.framework   0x00000001003c8f4c dvacore::threads::(anonymous namespace)::FunctionQueue::ExecuteOneFunction(boost::shared_ptr<dvacore::threads::(anonym ous namespace)::FunctionQueue>, bool) + 124
11 com.adobe.dvacore.framework   0x00000001003c9a4c boost::detail::function::void_function_obj_invoker0<boost::_bi::bind_t<bool, bool (*)(boost::shared_ptr<dvacore::threads::(anonymous namespace)::FunctionQueue>, bool), boost::_bi::list2<boost::_bi::value<boost::shared_ptr<dvacore::threads::(anonymous namespace)::FunctionQueue> >, boost::_bi::value<bool> > >, void>::invoke(boost::detail::function::function_buffer&) + 60
12 com.adobe.dvacore.framework   0x00000001003c763c boost::function0<void>::operator()() const + 28
13 com.adobe.dvacore.framework   0x00000001003c9b02 dvacore::threads::(anonymous namespace)::RunLoopAdaptor::Execute(__CFRunLoopTimer*, void*) + 18
14 com.apple.CoreFoundation 0x00007fff8b7ae3e4 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
15 com.apple.CoreFoundation 0x00007fff8b7adf1f __CFRunLoopDoTimer + 1151
16 com.apple.CoreFoundation 0x00007fff8b81f5aa __CFRunLoopDoTimers + 298
17 com.apple.CoreFoundation 0x00007fff8b7696a5 __CFRunLoopRun + 1525
18 com.apple.CoreFoundation 0x00007fff8b768e75 CFRunLoopRunSpecific + 309
19 com.apple.HIToolbox 0x00007fff93049a0d RunCurrentEventLoopInMode + 226
20 com.apple.HIToolbox 0x00007fff93049685 ReceiveNextEventCommon + 173
21 com.apple.HIToolbox 0x00007fff930495bc _BlockUntilNextEventMatchingListInModeWithFilter + 65
22 com.apple.AppKit 0x00007fff8e47924e _DPSNextEvent + 1434
23 com.apple.AppKit 0x00007fff8e47889b -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
24 com.apple.AppKit 0x00007fff8e46c99c -[NSApplication run] + 553
25 com.adobe.Frontend.framework   0x00000001000d302d FE::MacApplication::RunSelf() + 45
26 com.adobe.Frontend.framework   0x0000000100047e98 FE::Application::Run(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 4328
27 com.adobe.Frontend.framework   0x00000001000d4944 FE::AppMain(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int, void*) + 276
28 com.adobe.Frontend.framework   0x00000001000dbbe5 FE::Run(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int) + 581
29 com.adobe.AdobePremierePro     0x00000001000018ac main + 508
30 com.adobe.AdobePremierePro     0x00000001000016a4 start + 52

Why can't see the timeline audio waveform on sequences inside another sequence in Premiere Pro CS6? Can I fix this?

Does anyone know why I can't see the timeline audio waveform on sequences inside another sequence in Premiere Pro CS6? Can I fix this?

PERFECT!!! THANK YOU, Ann!!!

How to turn on audio waveform in timeline in Premiere Pro CC

I'm not sure why I'm not getting a clear answer for this question, but can anyone help me out here? In Premiere CS6, all I had to do was press the little arrow next to my timeline and I could see the audio waveform. The arrow is no longer in CC and I can't figure out how else to turn this on. I use this feature constantly so it's quite inconvenient not to have it on.

This seems like a bug to me. My audio was doing the same thing. I imported a clip from an HD camera. Dragged it onto my sequence timeline and the audio showed as a solid blue bar.
I couldn't see my audio waveform until I took the yellow scrubber and dragged it back and forth across the whole sequence. Then the audio wave started to appear. It was very confusing because I had one other camera clip on the audio track below this one and it showed fine.
Then, it still disappears while playing, but shows while its paused...very odd.
While playing:
While paused:
UPDATE:
My fix was to
1. Alt+Click the audio portion of the clip to select just the audio.
2. Go to Clip>Audio Options>Audio Gain
3. HIt ok, Premiere then rendered my audio properly....odd. BTW, this clip was captured by premiere, so rendering audio wasn't an option. But as soon as I went to the audio options, it suddenly built the waveform peaks.

Why can't I see audio waveforms on my timeline?

Hi,
I was just upgraded to CS6 Production Premium from CS5 and I can't see any audio waveforms on my timeline in Premiere Pro. Is there some setting I need to change?
Thanks.
S.

There's no setting for this.
Have you waited for all media to finish conforming?

Can you 'zoom' the audio waveform in the timeline?

Unable to find a solution in the help or the FAQ, so I'll post my first question here :-)
I would like to vertically zoom into the audio waveform in the timeline. My situation is that I have a 24-bit audio mix of a classical concert with a fairly large dynamic range, i.e. very loud bits and very quiet bits in one single audio file. I don't see enough waveform detail in the quiet parts, even when I enlarge the track vertically. I haven't found an official way of zooming in, at least in the timeline. The audio-waveform-only display in the source monitor does offer a vertical zoom.
The official help only offers this:
"To see more volume detail when viewing an audio waveform in a Timeline panel, increase the track height."
Which seems to imply that 'zooming' in further to bring out the really quiet parts is not a feature.
I found a bit of a workaround, which is to adjust the clip gain -- the audio waveform changes accordingly. However I'd prefer not to be changing the audio volume every time I need a different vertical zoom on the waveform.
Thanks,
3p

While you can't zoom and the vertical adjustment is limited (which sucks because you can zoom in Audition)` there are still a few more options that might help increase the vertical size of the tracks window.
First, to adjust the vertical space of each track in the timeline place your selection tool over the line between the tracks over on the left side of the track where audio controls are and drag the track bottom up or down. You can also increase the workspace of the timeline by dragging it up using the same technique, or if you have another monitor put the timeline over there and make it much bigger.
Second, use the tilde key to expand the entire timeline window. It's the key to the left of #1 key at the top left. Hit it again to return. It will expand any window that is selected. I use this one to get a better look at the waveform. You can also drag the tracks to make them larger.
good luck!

Audio Waveforms Not Showing In Timeline - Bug Report

When I send P2 Footage from Prelude to PP, the audio waveforms on the timeline do not show, even though the settings are correct. I have to close PP and then reopen it and then they show. It is some sort of a bug. I'm on Mac OS 10.9, latest version, fast computer. Anyone else having this issue?

There are three kind of audio tracks, stereo, mono and 5.1. Mono can only be placed in a mono track, stereo only in a stereo track and 5.1 only in a 5.1 track. By default a new sequence has three stereo tracks, so when you enter mono material, a new mono track is created in track 4.
In your case you probably have 6 audio tracks of one kind and the 'lost' one is another kind of track and that is the reason it ends up in track 7. You can of course delete empty audio tracks, which will cause track 7 to move up.

Audio waveform image in timeline

Other than in the preferences, is there a shortcut for turning off the audio waveform in the timeline?

Create a button that you can place in the timeline.
or Press Option-Command-W.
or Choose Show Audio Waveforms from the Track Layout pop-up menu in the Timeline.

Audio Waveform Missing (or partial) in Timeline

Similar Messages

Maybe you are looking for